Merge 50bf1789f7 into 91e60b3716

DCCTimer.h

@@ -1,5 +1,5 @@
 /*
- *  © 2022-2024 Paul M. Antoine
+ *  © 2022-2023 Paul M. Antoine
  *  © 2021 Mike S
  *  © 2021-2023 Harald Barth
  *  © 2021 Fred Decker
@@ -135,8 +135,6 @@ private:
   #if defined (ARDUINO_ARCH_STM32)
   // bit array of used pins (max 32)
   static uint32_t usedpins;
-  static uint32_t * analogchans;        // Array of channel numbers to be scanned
-  static ADC_TypeDef * * adcchans;      // Array to capture which ADC is each input channel on
 #else
   // bit array of used pins (max 16)
   static uint16_t usedpins;

DCCTimerSTM32.cpp

@@ -1,6 +1,6 @@
 /*
  *  © 2023 Neil McKechnie
- *  © 2022-2024 Paul M. Antoine
+ *  © 2022-2023 Paul M. Antoine
  *  © 2021 Mike S
  *  © 2021, 2023 Harald Barth
  *  © 2021 Fred Decker
@@ -34,7 +34,6 @@
 #include "TrackManager.h"
 #endif
 #include "DIAG.h"
-#include <wiring_private.h>
 
 #if defined(ARDUINO_NUCLEO_F401RE) || defined(ARDUINO_NUCLEO_F411RE)
 // Nucleo-64 boards don't have additional serial ports defined by default
@@ -364,9 +363,9 @@ void DCCTimer::DCCEXanalogWrite(uint8_t pin, int value, bool invert) {
 uint32_t ADCee::usedpins = 0;         // Max of 32 ADC input channels!
 uint8_t ADCee::highestPin = 0;        // Highest pin to scan
 int * ADCee::analogvals = NULL;       // Array of analog values last captured
-uint32_t * ADCee::analogchans = NULL;        // Array of channel numbers to be scanned
+uint32_t * analogchans = NULL;        // Array of channel numbers to be scanned
 // bool adc1configured = false;
-ADC_TypeDef * * ADCee::adcchans = NULL;      // Array to capture which ADC is each input channel on
+ADC_TypeDef * * adcchans = NULL;      // Array to capture which ADC is each input channel on
 
 int16_t ADCee::ADCmax()
 {
@@ -384,10 +383,9 @@ int ADCee::init(uint8_t pin) {
   uint32_t adcchan =  STM_PIN_CHANNEL(pinmap_function(stmpin, PinMap_ADC)); // find ADC input channel
   ADC_TypeDef *adc = (ADC_TypeDef *)pinmap_find_peripheral(stmpin, PinMap_ADC); // find which ADC this pin is on ADC1/2/3 etc.
   int adcnum = 1;
-  // All variants have ADC1
   if (adc == ADC1)
     DIAG(F("ADCee::init(): found pin %d on ADC1"), pin);
-  // Checking for ADC2 and ADC3 being defined helps cater for more variants
+// Checking for ADC2 and ADC3 being defined helps cater for more variants later
 #if defined(ADC2)
   else if (adc == ADC2)
   {
@@ -434,18 +432,6 @@ int ADCee::init(uint8_t pin) {
         RCC->AHB1ENR |= RCC_AHB1ENR_GPIOFEN; //Power up PORTF
         gpioBase = GPIOF;
         break;
-#endif
-#if defined(GPIOG)
-    case 0x06:
-        RCC->AHB1ENR |= RCC_AHB1ENR_GPIOGEN; //Power up PORTG
-        gpioBase = GPIOG;
-        break;
-#endif
-#if defined(GPIOH)
-    case 0x07:
-        RCC->AHB1ENR |= RCC_AHB1ENR_GPIOHEN; //Power up PORTH
-        gpioBase = GPIOH;
-        break;
 #endif
     default:
       return -1023; // some silly value as error

EXRAIL2.cpp

@@ -54,7 +54,6 @@
 #include "TrackManager.h"
 #include "Turntables.h"
 #include "IODevice.h"
-#include "EXRAILSensor.h"
 
 
 // One instance of RMFT clas is used for each "thread" in the automation.
@@ -210,10 +209,9 @@ LookList* RMFT2::LookListLoader(OPCODE op1, OPCODE op2, OPCODE op3) {
   onAmberLookup=LookListLoader(OPCODE_ONAMBER);
   onGreenLookup=LookListLoader(OPCODE_ONGREEN);
   for (int sigslot=0;;sigslot++) {
-      int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
+    VPIN sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
-      if (sighandle==0) break;  // end of signal list
+    if (sigid==0) break;  // end of signal list
-      VPIN sigid = sighandle & SIGNAL_ID_MASK;
+    doSignal(sigid & SIGNAL_ID_MASK, SIGNAL_RED);
-      doSignal(sigid, SIGNAL_RED);
   }
   }
 
@@ -253,14 +251,6 @@ LookList* RMFT2::LookListLoader(OPCODE op1, OPCODE op2, OPCODE op3) {
       break;
     }
 
-    case OPCODE_ONSENSOR:
-      if (compileFeatures & FEATURE_SENSOR) 
-        new EXRAILSensor(operand,progCounter+3,true );
-      break;
-    case OPCODE_ONBUTTON:
-      if (compileFeatures & FEATURE_SENSOR) 
-        new EXRAILSensor(operand,progCounter+3,false );
-      break;
     case OPCODE_TURNOUT: {
       VPIN id=operand;
       int addr=getOperand(progCounter,1);
@@ -490,8 +480,6 @@ bool RMFT2::skipIfBlock() {
 }
 
 void RMFT2::loop() {
-  if (compileFeatures & FEATURE_SENSOR) 
-      EXRAILSensor::checkAll();
 
   // Round Robin call to a RMFT task each time
   if (loopTask==NULL) return;
@@ -1096,8 +1084,6 @@ void RMFT2::loop2() {
   case OPCODE_ONGREEN:
   case OPCODE_ONCHANGE:
   case OPCODE_ONTIME:
-  case OPCODE_ONBUTTON:
-  case OPCODE_ONSENSOR:
 #ifndef IO_NO_HAL
   case OPCODE_DCCTURNTABLE: // Turntable definition ignored at runtime
   case OPCODE_EXTTTURNTABLE:  // Turntable definition ignored at runtime
@@ -1144,17 +1130,16 @@ void RMFT2::kill(const FSH * reason, int operand) {
 
 int16_t RMFT2::getSignalSlot(int16_t id) {
   for (int sigslot=0;;sigslot++) {
-      int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
+      int16_t sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
-      if (sighandle==0) { // end of signal list 
+      if (sigid==0) { // end of signal list 
         DIAG(F("EXRAIL Signal %d not defined"), id);
         return -1;
       }
-      VPIN sigid = sighandle & SIGNAL_ID_MASK;
       // sigid is the signal id used in RED/AMBER/GREEN macro
       // for a LED signal it will be same as redpin
       // but for a servo signal it will also have SERVO_SIGNAL_FLAG set. 
 
-      if (sigid != id) continue; // keep looking
+      if ((sigid & SIGNAL_ID_MASK)!= id) continue; // keep looking
       return sigslot; // relative slot in signals table
   }  
 }
@@ -1177,14 +1162,13 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
  
   // Correct signal definition found, get the rag values
   int16_t sigpos=sigslot*8; 
-  int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos);
+  VPIN sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos);
   VPIN redpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+2);
   VPIN amberpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+4);
   VPIN greenpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+6);
   //if (diag) DIAG(F("signal %d %d %d %d %d"),sigid,id,redpin,amberpin,greenpin);
 
-  VPIN sigtype=sighandle & ~SIGNAL_ID_MASK;
+  VPIN sigtype=sigid & ~SIGNAL_ID_MASK;
-  VPIN sigid = sighandle & SIGNAL_ID_MASK;
 
   if (sigtype == SERVO_SIGNAL_FLAG) {
     // A servo signal, the pin numbers are actually servo positions
@@ -1207,7 +1191,7 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
     byte value=redpin;
     if (rag==SIGNAL_AMBER) value=amberpin;
     if (rag==SIGNAL_GREEN) value=greenpin; 
-    DCC::setExtendedAccessory(sigid, value);
+    DCC::setExtendedAccessory(sigid & SIGNAL_ID_MASK,value);
     return; 
   }
 
@@ -1258,9 +1242,8 @@ bool RMFT2::signalAspectEvent(int16_t address, byte aspect ) {
   int16_t sigslot=getSignalSlot(address);
   if (sigslot<0) return false;  // this is not a defined signal 
   int16_t sigpos=sigslot*8; 
-  int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos);
+  VPIN sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos);
-  VPIN sigtype=sighandle & ~SIGNAL_ID_MASK;
+  VPIN sigtype=sigid & ~SIGNAL_ID_MASK;
-  VPIN sigid = sighandle & SIGNAL_ID_MASK;
   if (sigtype!=DCCX_SIGNAL_FLAG) return false; // not a DCCX signal
   // Turn an aspect change into a RED/AMBER/GREEN setting
   if (aspect==GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+2)) {

EXRAIL2.h

@@ -73,7 +73,7 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,OPCODE_TOGGLE_TURNOUT,
              OPCODE_ROUTE_ACTIVE,OPCODE_ROUTE_INACTIVE,OPCODE_ROUTE_HIDDEN,
              OPCODE_ROUTE_DISABLED,
              OPCODE_STASH,OPCODE_CLEAR_STASH,OPCODE_CLEAR_ALL_STASH,OPCODE_PICKUP_STASH,
-             OPCODE_ONBUTTON,OPCODE_ONSENSOR,
+
              // OPcodes below this point are skip-nesting IF operations
              // placed here so that they may be skipped as a group
              // see skipIfBlock()
@@ -115,7 +115,6 @@ enum BlinkState: byte {
   static const byte FEATURE_ROUTESTATE= 0x10;
   static const byte FEATURE_STASH = 0x08;
   static const byte FEATURE_BLINK = 0x04;
-  static const byte FEATURE_SENSOR = 0x02;
   
  
   // Flag bits for status of hardware and TPL
@@ -186,7 +185,6 @@ class LookList {
   static const FSH *  getTurntableDescription(int16_t id);
   static const FSH *  getTurntablePositionDescription(int16_t turntableId, uint8_t positionId);
   static void startNonRecursiveTask(const FSH* reason, int16_t id,int pc);
-  static bool readSensor(uint16_t sensorId);
 
 private: 
     static void ComandFilter(Print * stream, byte & opcode, byte & paramCount, int16_t p[]);
@@ -210,6 +208,7 @@ private:
     static RMFT2 * pausingTask;
     void delayMe(long millisecs);
     void driveLoco(byte speedo);
+    bool readSensor(uint16_t sensorId);
     bool skipIfBlock();
     bool readLoco();
     void loop2();

EXRAIL2MacroReset.h

@@ -114,8 +114,6 @@
 #undef ONGREEN
 #undef ONRED
 #undef ONROTATE
-#undef ONBUTTON
-#undef ONSENSOR
 #undef ONTHROW 
 #undef ONCHANGE
 #undef PARSE
@@ -281,8 +279,6 @@
 #define ONROTATE(turntable_id)
 #define ONTHROW(turnout_id) 
 #define ONCHANGE(sensor_id)
-#define ONSENSOR(sensor_id)
-#define ONBUTTON(sensor_id)
 #define PAUSE
 #define PIN_TURNOUT(id,pin,description...) 
 #define PRINT(msg) 

EXRAIL2Parser.cpp

@@ -214,13 +214,12 @@ bool RMFT2::parseSlash(Print * stream, byte & paramCount, int16_t p[]) {
       // do the signals
       // flags[n] represents the state of the nth signal in the table 
       for (int sigslot=0;;sigslot++) {
-        int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
+        VPIN sigid=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
-        if (sighandle==0) break; // end of signal list
+        if (sigid==0) break; // end of signal list 
-	VPIN sigid = sighandle & SIGNAL_ID_MASK;
         byte flag=flags[sigslot] & SIGNAL_MASK; // obtain signal flags for this id
         StringFormatter::send(stream,F("\n%S[%d]"), 
           (flag == SIGNAL_RED)? F("RED") : (flag==SIGNAL_GREEN) ? F("GREEN") : F("AMBER"),
-			      sigid);
+          sigid & SIGNAL_ID_MASK); 
       } 
     }
 

EXRAILMacros.h

@@ -210,10 +210,6 @@ bool exrailHalSetup() {
 #define STASH(id) | FEATURE_STASH
 #undef BLINK
 #define BLINK(vpin,onDuty,offDuty) | FEATURE_BLINK
-#undef ONBUTTON
-#define ONBUTTON(vpin) | FEATURE_SENSOR
-#undef ONSENSOR
-#define ONSENSOR(vpin) | FEATURE_SENSOR
 
 const byte RMFT2::compileFeatures = 0
    #include "myAutomation.h"
@@ -557,8 +553,6 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 #endif
 #define ONTHROW(turnout_id) OPCODE_ONTHROW,V(turnout_id),
 #define ONCHANGE(sensor_id) OPCODE_ONCHANGE,V(sensor_id),
-#define ONSENSOR(sensor_id) OPCODE_ONSENSOR,V(sensor_id),
-#define ONBUTTON(sensor_id) OPCODE_ONBUTTON,V(sensor_id),
 #define PAUSE OPCODE_PAUSE,0,0,
 #define PICKUP_STASH(id) OPCODE_PICKUP_STASH,V(id),
 #define PIN_TURNOUT(id,pin,description...) OPCODE_PINTURNOUT,V(id),OPCODE_PAD,V(pin),

EXRAILSensor.cpp

@@ -1,104 +0,0 @@
-/*
- *  © 2024 Chris Harlow
- *  All rights reserved.
- *  
- *  This file is part of CommandStation-EX
- *
- *  This is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 3 of the License, or
- *  (at your option) any later version.
- *
- *  It is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
- */
-
-/**********************************************************************
-EXRAILSensor represents a sensor that should be monitored in order
-to call an exrail ONBUTTON or ONCHANGE handler.
-These are created at EXRAIL startup and thus need no delete or listing
-capability.
-The basic logic is similar to that found in the Sensor class
-except that on the relevant change an EXRAIL thread is started.    
-**********************************************************************/
-
-#include "EXRAILSensor.h"
-#include "EXRAIL2.h"
-
-void EXRAILSensor::checkAll() {
-  if (firstSensor == NULL) return;  // No sensors to be scanned
-  if (readingSensor == NULL) { 
-    // Not currently scanning sensor list
-    unsigned long thisTime = micros();
-    if (thisTime - lastReadCycle < cycleInterval) return;
-    // Required time has elapsed since last read cycle started,
-    // so initiate new scan through the sensor list
-    readingSensor = firstSensor;
-    lastReadCycle = thisTime;
-  }
-  
-  // Loop until either end of list is encountered or we pause for some reason
-  byte sensorCount = 0;
-
-  while (readingSensor != NULL) {
-    bool pause=readingSensor->check();
-    // Move to next sensor in list.
-    readingSensor = readingSensor->nextSensor;
-    // Currently process max of 16 sensors per entry.
-    // Performance measurements taken during development indicate that, with 128 sensors configured
-    // on 8x 16-pin MCP23017 GPIO expanders with polling (no change notification), all inputs can be read from the devices
-    // within 1.4ms (400Mhz I2C bus speed), and a full cycle of checking 128 sensors for changes takes under a millisecond.
-    if (pause || (++sensorCount)>=16) return; 
-  }
-} 
-
-bool EXRAILSensor::check() {
-  // check for debounced change in this sensor 
-  inputState = RMFT2::readSensor(pin);
-
-  // Check if changed since last time, and process changes.
-  if (inputState == active) {// no change
-    latchDelay = minReadCount; // Reset counter
-    return false;  // no change 
-  }
-
-    // Change detected ... has it stayed changed for long enough
-    if (latchDelay > 0) {
-      latchDelay--;
-      return false; 
-    } 
-    
-    // change validated, act on it.
-    active = inputState;
-    latchDelay = minReadCount;  // Reset debounce counter
-    if (onChange || active) {
-      new RMFT2(progCounter);
-      return true;  // Don't check any more sensors on this entry
-    }
-    return false; 
-}
-
-EXRAILSensor::EXRAILSensor(VPIN _pin, int _progCounter, bool _onChange) {
-  // Add to the start of the list
-  //DIAG(F("ONthing vpin=%d at %d"), _pin, _progCounter);
-  nextSensor = firstSensor;
-  firstSensor = this;
-
-  pin=_pin;
-  progCounter=_progCounter;
-  onChange=_onChange;
-
-  IODevice::configureInput(pin, true);   
-  active = IODevice::read(pin);
-  inputState = active;
-  latchDelay = minReadCount;
-}
-
-EXRAILSensor *EXRAILSensor::firstSensor=NULL;
-EXRAILSensor *EXRAILSensor::readingSensor=NULL;
-unsigned long EXRAILSensor::lastReadCycle=0;

EXRAILSensor.h

@@ -1,50 +0,0 @@
-/*
- *  © 2024 Chris Harlow
- *  All rights reserved.
- *  
- *  This file is part of CommandStation-EX
- *
- *  This is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 3 of the License, or
- *  (at your option) any later version.
- *
- *  It is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
- */
-
-#ifndef EXRAILSensor_h
-#define EXRAILSensor_h 
-#include "IODevice.h"
-class EXRAILSensor {
-  static EXRAILSensor * firstSensor;
- static EXRAILSensor * readingSensor;
- static unsigned long lastReadCycle;
- 
-  public:
-  static void checkAll();
-  
-  EXRAILSensor(VPIN _pin, int _progCounter, bool _onChange);
-  bool check();
-  
-  private:
-  static const unsigned int cycleInterval = 10000; // min time between consecutive reads of each sensor in microsecs.
-                                                   // should not be less than device scan cycle time.
-  static const byte minReadCount = 4; // number of additional scans before acting on change
-                                        // E.g. 1 means that a change is ignored for one scan and actioned on the next.
-                                        // Max value is 63
-  
-  EXRAILSensor* nextSensor;
-  VPIN pin; 
-  int progCounter; 
-  bool active; 
-  bool inputState;
-  bool onChange;
-  byte latchDelay;
-};
-#endif

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202404211704Z"
+#define GITHUB_SHA "devel-202404061747Z"

MotorDriver.cpp

@@ -1,5 +1,5 @@
 /*
- *  © 2022-2024 Paul M Antoine
+ *  © 2022-2023 Paul M Antoine
  *  © 2021 Mike S
  *  © 2021 Fred Decker
  *  © 2020-2023 Harald Barth
@@ -38,8 +38,6 @@ volatile portreg_t shadowPORTC;
 volatile portreg_t shadowPORTD;
 volatile portreg_t shadowPORTE;
 volatile portreg_t shadowPORTF;
-volatile portreg_t shadowPORTG;
-volatile portreg_t shadowPORTH;
 #endif
 
 MotorDriver::MotorDriver(int16_t power_pin, byte signal_pin, byte signal_pin2, int16_t brake_pin,
@@ -90,16 +88,6 @@ MotorDriver::MotorDriver(int16_t power_pin, byte signal_pin, byte signal_pin2, i
     fastSignalPin.shadowinout = fastSignalPin.inout;
     fastSignalPin.inout = &shadowPORTF;
   }
-  if (HAVE_PORTG(fastSignalPin.inout == &PORTG)) {
-    DIAG(F("Found PORTG pin %d"),signalPin);
-    fastSignalPin.shadowinout = fastSignalPin.inout;
-    fastSignalPin.inout = &shadowPORTG;
-  }
-  if (HAVE_PORTH(fastSignalPin.inout == &PORTH)) {
-    DIAG(F("Found PORTH pin %d"),signalPin);
-    fastSignalPin.shadowinout = fastSignalPin.inout;
-    fastSignalPin.inout = &shadowPORTF;
-  }
 
   signalPin2=signal_pin2;
   if (signalPin2!=UNUSED_PIN) {
@@ -138,16 +126,6 @@ MotorDriver::MotorDriver(int16_t power_pin, byte signal_pin, byte signal_pin2, i
       fastSignalPin2.shadowinout = fastSignalPin2.inout;
       fastSignalPin2.inout = &shadowPORTF;
     }
-    if (HAVE_PORTG(fastSignalPin2.inout == &PORTG)) {
-      DIAG(F("Found PORTG pin %d"),signalPin2);
-      fastSignalPin2.shadowinout = fastSignalPin2.inout;
-      fastSignalPin2.inout = &shadowPORTG;
-    }
-    if (HAVE_PORTH(fastSignalPin2.inout == &PORTH)) {
-      DIAG(F("Found PORTH pin %d"),signalPin2);
-      fastSignalPin2.shadowinout = fastSignalPin2.inout;
-      fastSignalPin2.inout = &shadowPORTH;
-    }
   }
   else dualSignal=false; 
   
@@ -415,18 +393,6 @@ void MotorDriver::setDCSignal(byte speedcode, uint8_t frequency /*default =0*/)
     setSignal(tDir);
     HAVE_PORTF(PORTF=shadowPORTF);
     interrupts();
-  } else if (HAVE_PORTG(fastSignalPin.shadowinout == &PORTG)) {
-    noInterrupts();
-    HAVE_PORTG(shadowPORTG=PORTG);
-    setSignal(tDir);
-    HAVE_PORTG(PORTG=shadowPORTG);
-    interrupts();
-  } else if (HAVE_PORTH(fastSignalPin.shadowinout == &PORTH)) {
-    noInterrupts();
-    HAVE_PORTH(shadowPORTH=PORTH);
-    setSignal(tDir);
-    HAVE_PORTH(PORTH=shadowPORTH);
-    interrupts();
   } else {
     noInterrupts();
     setSignal(tDir);

MotorDriver.h

@@ -1,5 +1,5 @@
 /*
- *  © 2022-2024 Paul M. Antoine
+ *  © 2022-2023 Paul M. Antoine
  *  © 2021 Mike S
  *  © 2021 Fred Decker
  *  © 2020 Chris Harlow
@@ -26,7 +26,6 @@
 #include "FSH.h"
 #include "IODevice.h"
 #include "DCCTimer.h"
-#include <wiring_private.h>
 
 // use powers of two so we can do logical and/or on the track modes in if clauses.
 // RACK_MODE_DCX is (TRACK_MODE_DC|TRACK_MODE_INV)
@@ -84,14 +83,6 @@ enum TRACK_MODE : byte {TRACK_MODE_NONE = 1, TRACK_MODE_MAIN = 2, TRACK_MODE_PRO
 #define PORTF GPIOF->ODR
 #define HAVE_PORTF(X) X
 #endif
-#if defined(GPIOG)
-#define PORTG GPIOG->ODR
-#define HAVE_PORTG(X) X
-#endif
-#if defined(GPIOH)
-#define PORTH GPIOH->ODR
-#define HAVE_PORTH(X) X
-#endif
 #endif
 
 // if macros not defined as pass-through we define
@@ -115,12 +106,6 @@ enum TRACK_MODE : byte {TRACK_MODE_NONE = 1, TRACK_MODE_MAIN = 2, TRACK_MODE_PRO
 #ifndef HAVE_PORTF
 #define HAVE_PORTF(X) byte TOKENPASTE2(Unique_, __LINE__) __attribute__((unused)) =0
 #endif
-#ifndef HAVE_PORTG
-#define HAVE_PORTG(X) byte TOKENPASTE2(Unique_, __LINE__) __attribute__((unused)) =0
-#endif
-#ifndef HAVE_PORTH
-#define HAVE_PORTH(X) byte TOKENPASTE2(Unique_, __LINE__) __attribute__((unused)) =0
-#endif
 
 // Virtualised Motor shield 1-track hardware Interface
 
@@ -160,8 +145,6 @@ extern volatile portreg_t shadowPORTC;
 extern volatile portreg_t shadowPORTD;
 extern volatile portreg_t shadowPORTE;
 extern volatile portreg_t shadowPORTF;
-extern volatile portreg_t shadowPORTG;
-extern volatile portreg_t shadowPORTH;
 
 enum class POWERMODE : byte { OFF, ON, OVERLOAD, ALERT };
 

Release_Notes/Exrail mods.txt

@@ -1,24 +1,3 @@
-// 5.2.49 
-
-Which is a more efficient than the AT/AFTER/IF methods 
-of handling buttons and switches, especially on MIMIC panels. 
-
-ONBUTTON(vpin) 
-  handles debounce and starts a task if a button is used to 
-  short a pin to ground. 
-
-  for example:
-     ONBUTTON(30) TOGGLE_TURNOUT(30) DONE
-
-ONSENSOR(vpin) 
-   handles debounce and starts a task if the pin changes.
-   You may want to check the pin state with an IF ...
-
-Note the ONBUTTON and ONSENSOR are not generally useful 
-for track sensors and running trains, because you dont know which
-train triggered the sensor.  
-
-// 5.2.47
 
 BLINK(vpin, onMs,offMs)
 

Turnouts.cpp

@@ -123,6 +123,7 @@
     return true;
   }
 
+#define DIAG_IO
   // Static setClosed function is invoked from close(), throw() etc. to perform the 
   //  common parts of the turnout operation.  Code which is specific to a turnout
   //  type should be placed in the virtual function setClosedInternal(bool) which is

version.h

@@ -3,11 +3,7 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.51"
+#define VERSION "5.2.48"
-// 5.2.51 - Bugfix for SIGNAL: Distinguish between sighandle and sigid
-// 5.2.50 - EXRAIL ONBUTTON/ONSENSOR observe LATCH
-// 5.2.49 - EXRAIL additions:
-//          ONBUTTON, ONSENSOR
 // 5.2.48 - Bugfix: HALDisplay was generating I2C traffic prior to I2C being initialised
 // 5.2.47 - EXRAIL additions:
 //          STEALTH_GLOBAL