DCCEXParser.cpp

@@ -86,7 +86,6 @@ const int16_t HASH_KEYWORD_C='C';
 const int16_t HASH_KEYWORD_G='G';
 const int16_t HASH_KEYWORD_I='I';
 const int16_t HASH_KEYWORD_O='O';
-const int16_t HASH_KEYWORD_P='P';
 const int16_t HASH_KEYWORD_R='R';
 const int16_t HASH_KEYWORD_T='T';
 const int16_t HASH_KEYWORD_X='X';
@@ -703,11 +702,10 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
                         if (tto->isHidden()) continue;          
                         StringFormatter::send(stream, F(" %d"),tto->getId());
                     }
-                    StringFormatter::send(stream, F(">\n"));
                 } else {    // <JO id>
                     Turntable *tto=Turntable::get(id);
                     if (!tto || tto->isHidden()) {
-                        StringFormatter::send(stream, F(" %d X>\n"), id);
+                        StringFormatter::send(stream, F(" %d X"), id);
                     } else {
                         uint8_t pos = tto->getPosition();
                         uint8_t type = tto->isEXTT();
@@ -717,32 +715,15 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
                         todesc = RMFT2::getTurntableDescription(id);
 #endif
                         if (todesc == NULL) todesc = F("");
-                        StringFormatter::send(stream, F(" %d %d %d %d \"%S\">\n"), id, type, pos, posCount, todesc);
-                    }
-                }
-                return;
-            case HASH_KEYWORD_P: // <JP id> returns turntable position list for the turntable id
-                if (params==2) { // <JP id>
-                    Turntable *tto=Turntable::get(id);
-                    if (!tto || tto->isHidden()) {
-                        StringFormatter::send(stream, F(" %d X>\n"), id);
-                    } else {
-                        uint8_t posCount = tto->getPositionCount();
-                        const FSH *tpdesc = NULL;
+                        StringFormatter::send(stream, F(" %d %d %d"), id, type, pos, todesc);
+                        
                         for (uint8_t p = 0; p < posCount; p++) {
-                            StringFormatter::send(stream, F("<jP"));
                             int16_t value = tto->getPositionValue(p);
-#ifdef EXRAIL_ACTIVE
-                            tpdesc = RMFT2::getTurntablePositionDescription(id, p);
-#endif
-                            if (tpdesc == NULL) tpdesc = F("");
-                            StringFormatter::send(stream, F(" %d %d %d \"%S\""), id, p, value, tpdesc);
-                            StringFormatter::send(stream, F(">\n"));
+                            StringFormatter::send(stream, F(" %d"), value);
                         }
                     }
-                } else {
-                    StringFormatter::send(stream, F("<jP X>\n"));
                 }
+                StringFormatter::send(stream, F(">\n"));
                 return;
 #endif
             default: break;    

EXRAIL2.cpp

@@ -95,9 +95,7 @@ LookList *  RMFT2::onAmberLookup=NULL;
 LookList *  RMFT2::onGreenLookup=NULL;
 LookList *  RMFT2::onChangeLookup=NULL;
 LookList *  RMFT2::onClockLookup=NULL;
-#ifndef IO_NO_HAL
 LookList *  RMFT2::onRotateLookup=NULL;
-#endif
 
 #define GET_OPCODE GETHIGHFLASH(RMFT2::RouteCode,progCounter)
 #define SKIPOP progCounter+=3
@@ -179,9 +177,8 @@ LookList* RMFT2::LookListLoader(OPCODE op1, OPCODE op2, OPCODE op3) {
   onGreenLookup=LookListLoader(OPCODE_ONGREEN);
   onChangeLookup=LookListLoader(OPCODE_ONCHANGE);
   onClockLookup=LookListLoader(OPCODE_ONTIME);
-#ifndef IO_NO_HAL
   onRotateLookup=LookListLoader(OPCODE_ONROTATE);
-#endif
+
 
   // Second pass startup, define any turnouts or servos, set signals red
   // add sequences onRoutines to the lookups
@@ -1017,16 +1014,7 @@ void RMFT2::loop2() {
       return;
     }
     break;
-
-#ifndef IO_NO_HAL
-  case OPCODE_WAITFORTT:  // OPCODE_WAITFOR,V(turntable_id)
-    if (Turntable::ttMoving(operand)) {
-      delayMe(100);
-      return;
-    }
-    break;
-#endif
-
+    
   case OPCODE_PRINT:
     printMessage(operand);
     break;
@@ -1051,12 +1039,10 @@ void RMFT2::loop2() {
   case OPCODE_ONGREEN:
   case OPCODE_ONCHANGE:
   case OPCODE_ONTIME:
-#ifndef IO_NO_HAL
   case OPCODE_DCCTURNTABLE: // Turntable definition ignored at runtime
   case OPCODE_EXTTTURNTABLE:  // Turntable definition ignored at runtime
   case OPCODE_TTADDPOSITION:  // Turntable position definition ignored at runtime
   case OPCODE_ONROTATE:
-#endif
   
     break;
     
@@ -1201,12 +1187,10 @@ void RMFT2::changeEvent(int16_t vpin, bool change) {
   if (change)  handleEvent(F("CHANGE"),onChangeLookup,vpin);
 }
 
-#ifndef IO_NO_HAL
 void RMFT2::rotateEvent(int16_t turntableId, bool change) {
   // Hunt or an ONROTATE for this turntable
   if (change) handleEvent(F("ROTATE"),onRotateLookup,turntableId);
 }
-#endif
 
 void RMFT2::clockEvent(int16_t clocktime, bool change) {
   // Hunt for an ONTIME for this time

EXRAIL2.h

@@ -63,10 +63,8 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,
              OPCODE_ONCHANGE,
              OPCODE_ONCLOCKTIME,
              OPCODE_ONTIME,
-#ifndef IO_NO_HAL
              OPCODE_TTADDPOSITION,OPCODE_DCCTURNTABLE,OPCODE_EXTTTURNTABLE,
-             OPCODE_ONROTATE,OPCODE_ROTATE,OPCODE_IFTTPOSITION,OPCODE_WAITFORTT,
-#endif
+             OPCODE_ONROTATE,OPCODE_ROTATE,OPCODE_IFTTPOSITION,
 
              // OPcodes below this point are skip-nesting IF operations
              // placed here so that they may be skipped as a group
@@ -199,9 +197,7 @@ private:
    static LookList * onGreenLookup;
    static LookList * onChangeLookup;
    static LookList * onClockLookup;
-#ifndef IO_NO_HAL
    static LookList * onRotateLookup;
-#endif
     
   // Local variables - exist for each instance/task 
     RMFT2 *next;   // loop chain 

EXRAIL2MacroReset.h

@@ -150,9 +150,6 @@
 #undef VIRTUAL_SIGNAL
 #undef VIRTUAL_TURNOUT
 #undef WAITFOR
-#ifndef IO_NO_HAL
-#undef WAITFORTT
-#endif
 #undef WITHROTTLE
 #undef XFOFF
 #undef XFON
@@ -284,9 +281,6 @@
 #define VIRTUAL_SIGNAL(id) 
 #define VIRTUAL_TURNOUT(id,description...) 
 #define WAITFOR(pin)
-#ifndef IO_NO_HAL
-#define WAITFORTT(turntable_id)
-#endif
 #define WITHROTTLE(msg)
 #define XFOFF(cab,func)
 #define XFON(cab,func)

EXRAILMacros.h

@@ -54,8 +54,6 @@
 
 // helper macro for turnout descriptions, creates NULL for missing description
 #define O_DESC(id, desc) case id: return ("" desc)[0]?F("" desc):NULL;
-// helper macro for turntable descriptions, creates NULL for missing description
-#define T_DESC(tid,pid,desc) if(turntableId==tid && positionId==pid) return ("" desc)[0]?F("" desc):NULL;
 // helper macro for turnout description as HIDDEN 
 #define HIDDEN "\x01"
 
@@ -205,14 +203,17 @@ const FSH * RMFT2::getTurntableDescription(int16_t turntableId) {
 }
 
 // Pass to get turntable position descriptions (optional)
-#include "EXRAIL2MacroReset.h"
-#undef TT_ADDPOSITION
-#define TT_ADDPOSITION(turntable_id,position,value,description...) T_DESC(turntable_id,position,description)
+// #include "EXRAIL2MacroReset.h"
+// #undef TT_ADDPOSITION
+// #define TT_ADDPOSITION(turntable_id,value,description...) O_DESC(turntable_id,description)
 
-const FSH * RMFT2::getTurntablePositionDescription(int16_t turntableId, uint8_t positionId) {
-   #include "myAutomation.h"
-   return NULL;
-}
+// const FSH * RMFT2::getTurntablePositionDescription(int16_t turntableId, uint8_t positionId) {
+//    switch (turntableId) {
+//       #include "myAutomation.h"
+//    default:break;
+//    }
+//    return NULL;
+// }
 
 // Pass 6: Roster IDs (count)
 #include "EXRAIL2MacroReset.h"
@@ -419,9 +420,6 @@ const  HIGHFLASH  int16_t RMFT2::SignalDefinitions[] = {
 #define VIRTUAL_TURNOUT(id,description...) OPCODE_PINTURNOUT,V(id),OPCODE_PAD,V(0), 
 #define WITHROTTLE(msg) PRINT(msg)
 #define WAITFOR(pin) OPCODE_WAITFOR,V(pin),
-#ifndef IO_NO_HAL
-#define WAITFORTT(turntable_id) OPCODE_WAITFORTT,V(turntable_id),
-#endif
 #define XFOFF(cab,func) OPCODE_XFOFF,V(cab),OPCODE_PAD,V(func),
 #define XFON(cab,func) OPCODE_XFON,V(cab),OPCODE_PAD,V(func),
 

Turntables.cpp

@@ -115,12 +115,6 @@ uint8_t Turntable::getPosition(uint16_t id) {
   return tto->getPosition();
 }
 
-bool Turntable::ttMoving(uint16_t id) {
-  Turntable *tto = get(id);
-  if (!tto) return false;
-  return tto->isMoving();
-}
-
 // Initiate a turntable move
 bool Turntable::setPosition(uint16_t id, uint8_t position, uint8_t activity) {
 #if defined(DIAG_IO)

Turntables.h

@@ -179,7 +179,6 @@ public:
   inline static bool exists(uint16_t id) { return get(id) != 0; }
   static bool setPosition(uint16_t id, uint8_t position, uint8_t activity=0);
   static uint8_t getPosition(uint16_t id);
-  static bool ttMoving(uint16_t id);
   inline static Turntable *first() { return _firstTurntable; }
   static bool printAll(Print *stream) {
     bool gotOne = false;

platformio.ini

@@ -30,7 +30,7 @@ include_dir = .
 
 [env]
 build_flags = -Wall -Wextra
-; monitor_filters = time
+monitor_filters = time
 ; lib_deps = adafruit/Adafruit ST7735 and ST7789 Library @ ^1.10.0
 
 [env:samd21-dev-usb]