EXRAIL2.h

@@ -258,23 +258,4 @@ private:
 #define GET_OPCODE GETHIGHFLASH(RMFT2::RouteCode,progCounter)
 #define SKIPOP progCounter+=3
 
-// IO_I2CDFPlayer commands and values
-enum  : uint8_t{
-    DF_PLAY          = 0x0F,
-    DF_VOL           = 0x06,
-    DF_FOLDER        = 0x2B, // Not a DFPlayer command, used to set folder nr where audio file is
-    DF_REPEATPLAY    = 0x08,
-    DF_STOPPLAY      = 0x16,
-    DF_EQ            = 0x07, // Set equaliser, require parameter NORMAL, POP, ROCK, JAZZ, CLASSIC or BASS
-    DF_RESET         = 0x0C,
-    DF_DACON         = 0x1A,
-    DF_SETAM         = 0x2A, // Set audio mixer 1 or 2 for this DFPLayer   
-    DF_NORMAL        = 0x00, // Equalizer parameters
-    DF_POP           = 0x01,
-    DF_ROCK          = 0x02,
-    DF_JAZZ          = 0x03,
-    DF_CLASSIC       = 0x04,
-    DF_BASS          = 0x05,
-  };
-
 #endif

EXRAILMacros.h

@@ -59,10 +59,6 @@
 // helper macro for turnout description as HIDDEN 
 #define HIDDEN "\x01"
 
-// PLAYSOUND is alias of ANOUT to make the user experience of a Conductor beter for
-// playing sounds with IO_I2CDFPlayer
-#define PLAYSOUND ANOUT
-
 // helper macro to strip leading zeros off time inputs
 // (10#mins)%100)
 #define STRIP_ZERO(value) 10##value%100

EthernetInterface.cpp

@@ -182,15 +182,11 @@ bool EthernetInterface::checkLink() {
       if (ip[0] == 0)
         LCD(4,F("Awaiting DHCP..."));
       while (ip[0] == 0) {        // wait until we are given an IP address from the DHCP server
+        // LCD(4,F("."));
         ip = Ethernet.localIP(); // look what IP was obtained (dynamic or static)
       }
-      if (MAX_MSG_SIZE < 20) {
+      LCD(4,F("IP: %d.%d.%d.%d"), ip[0], ip[1], ip[2], ip[3]);
-        LCD(4,F("%d.%d.%d.%d"), ip[0], ip[1], ip[2], ip[3]);
+      LCD(5,F("Port:%d"), IP_PORT);
-        LCD(5,F("Port:%d  Eth"), IP_PORT);
-      } else {
-        LCD(4,F("Ethernet UP"));
-        LCD(5,F("%d.%d.%d.%d:%d"), ip[0], ip[1], ip[2], ip[3], IP_PORT);
-      }
       mdns.begin(Ethernet.localIP(), WIFI_HOSTNAME); // hostname
       mdns.addServiceRecord(WIFI_HOSTNAME "._withrottle", IP_PORT, MDNSServiceTCP);
       // only create a outboundRing it none exists, this may happen if the cable
@@ -212,8 +208,7 @@ bool EthernetInterface::checkLink() {
       // tear down server
       delete server;
       server = nullptr;
-      LCD(4,F("Ethernet DOWN"));
+      LCD(4,F("IP: None"));
-      LCD(5,F(" "));
     }
   }
   return false;

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-stm32EC 202402041604Z"
+#define GITHUB_SHA "devel-stm32EC 202402041220Z"

I2CManager.cpp

@@ -54,8 +54,8 @@ static const FSH * guessI2CDeviceType(uint8_t address) {
     return F("Time-of-flight sensor");
   else if (address >= 0x3c && address <= 0x3d)
     return F("OLED Display");
-  else if (address >= 0x48 && address <= 0x57) // SC16IS752x UART detection
+  else if (address >= 0x48 && address <= 0x57) // Henkk: Added SC16IS752 UART detection
-    return F("SC16IS75x UART");
+    return F("SC16IS752 UART");
   else if (address >= 0x48 && address <= 0x4f)
     return F("Analogue Inputs or PWM");
   else if (address >= 0x40 && address <= 0x4f)

IO_I2CDFPlayer.h

@@ -23,28 +23,23 @@
  * This driver is a modified version of the IO_DFPlayer.h file
  * *********************************************************************************************
  * 
- * Dec 2023, Added NXP SC16IS752 I2C Dual UART to enable the DFPlayer connection over the I2C bus
+ * 2023, Added NXP SC16IS752 I2C Dual UART to enable the DFPlayer connection over the I2C bus
  * The SC16IS752 has 64 bytes TX & RX FIFO buffer
  * First version without interrupts from I2C UART and only RX/TX are used, interrupts may not be
  * needed as the RX Fifo holds the reply 
  * 
- * Jan 2024, Issue with using both UARTs simultaniously, the secod uart seems to work  but the first transmit 
- * corrupt data. This need more analysis and experimenatation. 
- * Will push this driver to the dev branch with the uart fixed to 0 
- * Both SC16IS750 (single uart) and SC16IS752 (dual uart, but only uart 0 is enable)
- * 
  * myHall.cpp configuration syntax:
  * 
- * I2CDFPlayer::create(1st vPin, vPins, I2C address, xtal);
+ * I2CDFPlayer::create(1st vPin, vPins, I2C address, UART ch, AM);
  * 
  * Parameters:
  * 1st vPin     : First virtual pin that EX-Rail can control to play a sound, use PLAYSOUND command (alias of ANOUT)
- * vPins        : Total number of virtual pins allocated (2 vPins are supported, one for each UART)
+ * vPins        : Total number of virtual pins allocated (only 1 vPin is supported)
- *                1st vPin for UART 0, 2nd for UART 1
+ * I2C Address  : I2C address of the serial controller, in 0x format,
- * I2C Address  : I2C address of the serial controller, in 0x format
+ * UART ch      : Indicating UART 0 or UART 1, values 0 or 1
- * xtal         : 0 for 1,8432Mhz, 1 for 14,7456Mhz
+ * AM           : audio mixer, values: 1 or 2 to select an audio amplifier, no effect if AM is not installed
  * 
- * The vPin is also a pin that can be read, it indicate if the DFPlayer has finished playing a track
+ * The vPin is also an pin that can be read, it indicated if the DFPlayer has finished playing a track
  *
  */
 
@@ -80,7 +75,7 @@ private:
   // SC16IS752 defines
   I2CAddress _I2CAddress;
   I2CRB _rb;
-  uint8_t _UART_CH=0x00;  // Fix uart ch to 0 for now
+  uint8_t _UART_CH;  
   // Communication parameters for the DFPlayer are fixed at 8 bit, No parity, 1 stopbit
   uint8_t WORD_LEN = 0x03;    // Value LCR bit 0,1
   uint8_t STOP_BIT = 0x00;    // Value LCR bit 2 
@@ -101,36 +96,33 @@ private:
   bool _stopplayCmd = false;
   bool _resetCmd = false;
   bool _eqCmd = false;
-  uint8_t _requestedEQValue = DF_NORMAL;
+  uint8_t _requestedEQValue = NORMAL;
-  uint8_t _currentEQvalue = DF_NORMAL; // start equalizer value
+  uint8_t _currentEQvalue = NORMAL; // start equalizer value
   bool _daconCmd = false;
   uint8_t _audioMixer = 0x01; // Default to output amplifier 1
   bool _setamCmd = false; // Set the Audio mixer channel
   uint8_t _outbuffer [11]; // DFPlayer command is 10 bytes + 1 byte register address & UART channel
   uint8_t _inbuffer[10]; // expected DFPlayer return 10 bytes
-   
+ 
-  unsigned long _sc16is752_xtal_freq;
+  //unsigned long SC16IS752_XTAL_FREQ = 1843200; // To support cheap eBay/AliExpress SC16IS752 boards
-  unsigned long SC16IS752_XTAL_FREQ_LOW = 1843200; // To support cheap eBay/AliExpress SC16IS752 boards
+  unsigned long SC16IS752_XTAL_FREQ = 14745600; // Support for higher baud rates, standard for modular EX-IO system
-  unsigned long SC16IS752_XTAL_FREQ_HIGH = 14745600; // Support for higher baud rates, standard for modular EX-IO system
+
    
 public:
   // Constructor
-   I2CDFPlayer(VPIN firstVpin, int nPins, I2CAddress i2cAddress, uint8_t xtal){
+  I2CDFPlayer(VPIN firstVpin, int nPins, I2CAddress i2cAddress, uint8_t UART_CH, uint8_t AM){
     _firstVpin = firstVpin;
     _nPins = nPins;
     _I2CAddress = i2cAddress;
-    if (xtal == 0){
+    _UART_CH = UART_CH;
-      _sc16is752_xtal_freq = SC16IS752_XTAL_FREQ_LOW;
+    _audioMixer = AM;  
-    } else { // should be 1
-        _sc16is752_xtal_freq = SC16IS752_XTAL_FREQ_HIGH;
-      }
     addDevice(this);
    } 
   
 public:
-  static void create(VPIN firstVpin, int nPins, I2CAddress i2cAddress, uint8_t xtal) {
+   static void create(VPIN firstVpin, int nPins, I2CAddress i2cAddress, uint8_t UART_CH, uint8_t AM) {
-    if (checkNoOverlap(firstVpin, nPins, i2cAddress)) new I2CDFPlayer(firstVpin, nPins, i2cAddress, xtal); 
+    if (checkNoOverlap(firstVpin, nPins, i2cAddress)) new I2CDFPlayer(firstVpin, nPins, i2cAddress, UART_CH, AM);
-    }
+  }
 
   void _begin() override {
     // check if SC16IS752 exist first, initialize and then resume DFPlayer init via SC16IS752
@@ -434,18 +426,18 @@ public:
        //case NONE:
        // DFPlayerCmd = cmd;
        // break;
-       case DF_PLAY:
+       case PLAY:
         _playCmd = true;
         _volCmd = true;        
         _requestedSong = value;
         _requestedVolumeLevel = volume; 
         _playing = true;        
         break;
-        case DF_VOL:
+        case VOL:
           _volCmd = true;          
           _requestedVolumeLevel = volume;
         break;
-       case DF_FOLDER:
+       case FOLDER:
         _folderCmd = true;
         if (volume <= 0 || volume > 99){ // Range checking, valid values 1-99, else default to 1
           _requestedFolder = 0x01; // if outside range, default to folder 01  
@@ -453,7 +445,7 @@ public:
           _requestedFolder = volume;
         }        
         break;
-       case DF_REPEATPLAY: // Need to check if _repeat == true, if so do nothing        
+       case REPEATPLAY: // Need to check if _repeat == true, if so do nothing        
         if (_repeat == false) {
            #ifdef DIAG_I2CDFplayer_playing
               DIAG(F("I2CDFPlayer: WriteAnalog Repeat: _repeat: 0x0%x, value: %d _repeatCmd: 0x%x"), _repeat, value, _repeatCmd);
@@ -464,30 +456,30 @@ public:
           _playing = true;         
         }
         break;
-       case DF_STOPPLAY:
+       case STOPPLAY:
         _stopplayCmd = true;        
         break;
-       case DF_EQ:
+       case EQ:
         #ifdef DIAG_I2CDFplayer_playing
           DIAG(F("I2CDFPlayer: WriteAnalog EQ: cmd: 0x%x, EQ value: 0x%x"), cmd, volume);
         #endif
         _eqCmd = true;        
         if (volume <= 0 || volume > 5) { // If out of range, default to NORMAL
-          _requestedEQValue = DF_NORMAL;            
+          _requestedEQValue = NORMAL;            
         } else { // Valid EQ parameter range
           _requestedEQValue = volume;     
           }
         break;        
-       case DF_RESET:
+       case RESET:
         _resetCmd = true;      
         break; 
-       case DF_DACON: // Works, but without the DACOFF command limited value, except when not relying on DFPlayer default to turn the DAC on
+       case DACON: // Works, but without the DACOFF command limited value, except when not relying on DFPlayer default to turn the DAC on
         #ifdef DIAG_I2CDFplayer_playing
           DIAG(F("I2CDFPlayer: WrtieAnalog DACON: cmd: 0x%x"), cmd);
         #endif
         _daconCmd = true;
         break;
-        case DF_SETAM: // Set the audio mixer channel to 1 or 2
+        case SETAM: // Set the audio mixer channel to 1 or 2
           _setamCmd = true;
           #ifdef DIAG_I2CDFplayer_playing
             DIAG(F("I2CDFPlayer: WrtieAnalog SETAM: cmd: 0x%x"), cmd);
@@ -612,8 +604,7 @@ private:
     #ifdef DIAG_I2CDFplayer
       DIAG(F("SC16IS752: Initialize I2C: %s , UART Ch: 0x%x"), _I2CAddress.toString(),  _UART_CH);      
     #endif
-    //uint16_t _divisor = (SC16IS752_XTAL_FREQ / PRESCALER) / (BAUD_RATE * 16);
+    uint16_t _divisor = (SC16IS752_XTAL_FREQ / PRESCALER) / (BAUD_RATE * 16);
-    uint16_t _divisor = (_sc16is752_xtal_freq/PRESCALER)/(BAUD_RATE * 16);  // Calculate _divisor for baudrate
     TEMP_REG_VAL = 0x08; // UART Software reset
     UART_WriteRegister(REG_IOCONTROL, TEMP_REG_VAL);
     TEMP_REG_VAL = 0x00; // Set pins to GPIO mode
@@ -779,25 +770,23 @@ enum : uint8_t{
     REG_XOFF2     = 0x07, // R/W
   };
 
-
 // DFPlayer commands and values
-// Declared in this scope
 enum  : uint8_t{
-    DF_PLAY          = 0x0F,
+    PLAY          = 0x0F,
-    DF_VOL           = 0x06,
+    VOL           = 0x06,
-    DF_FOLDER        = 0x2B, // Not a DFPlayer command, used to set folder nr where audio file is
+    FOLDER        = 0x2B, // Not a DFPlayer command, used to set folder nr where audio file is
-    DF_REPEATPLAY    = 0x08,
+    REPEATPLAY    = 0x08,
-    DF_STOPPLAY      = 0x16,
+    STOPPLAY      = 0x16,
-    DF_EQ            = 0x07, // Set equaliser, require parameter NORMAL, POP, ROCK, JAZZ, CLASSIC or BASS
+    EQ            = 0x07, // Set equaliser, require parameter NORMAL, POP, ROCK, JAZZ, CLASSIC or BASS
-    DF_RESET         = 0x0C,
+    RESET         = 0x0C,
-    DF_DACON         = 0x1A,
+    DACON         = 0x1A,
-    DF_SETAM         = 0x2A, // Set audio mixer 1 or 2 for this DFPLayer   
+    SETAM         = 0x2A, // Set audio mixer 1 or 2 for this DFPLayer   
-    DF_NORMAL        = 0x00, // Equalizer parameters
+    NORMAL        = 0x00, // Equalizer parameters
-    DF_POP           = 0x01,
+    POP           = 0x01,
-    DF_ROCK          = 0x02,
+    ROCK          = 0x02,
-    DF_JAZZ          = 0x03,
+    JAZZ          = 0x03,
-    DF_CLASSIC       = 0x04,
+    CLASSIC       = 0x04,
-    DF_BASS          = 0x05,    
+    BASS          = 0x05,    
   };
 
 };

WifiESP32.cpp

@@ -164,8 +164,6 @@ bool WifiESP::setup(const char *SSid,
   if (haveSSID && havePassword && !forceAP) {
     WiFi.setHostname(hostname); // Strangely does not work unless we do it HERE!
     WiFi.mode(WIFI_STA);
-    WiFi.setScanMethod(WIFI_ALL_CHANNEL_SCAN); // Scan all channels so we find strongest
-                                               // (default in Wifi library is first match)
 #ifdef SERIAL_BT_COMMANDS
     WiFi.setSleep(true);
 #else
@@ -206,7 +204,7 @@ bool WifiESP::setup(const char *SSid,
   if (!haveSSID || forceAP) {
     // prepare all strings
     String strSSID(forceAP ? SSid : "DCCEX_");
-    String strPass( (forceAP && havePassword) ? password : "PASS_");
+    String strPass(forceAP ? password : "PASS_");
     if (!forceAP) {
       String strMac = WiFi.macAddress();
       strMac.remove(0,9);
@@ -230,8 +228,7 @@ bool WifiESP::setup(const char *SSid,
       // DIAG(F("Wifi AP SSID %s PASS %s"),strSSID.c_str(),havePassword ? password : strPass.c_str());
       DIAG(F("Wifi in AP mode"));
       LCD(5, F("Wifi: %s"), strSSID.c_str());
-      if (!havePassword)
+      LCD(6, F("PASS: %s"),havePassword ? password : strPass.c_str());
-	LCD(6, F("PASS: %s"),strPass.c_str());
       // DIAG(F("Wifi AP IP %s"),WiFi.softAPIP().toString().c_str());
       LCD(7, F("IP: %s"),WiFi.softAPIP().toString().c_str());
       wifiUp = true;

myHal.cpp_example.txt

@@ -25,7 +25,6 @@
 //#include "IO_EXTurntable.h"   // Turntable-EX turntable controller
 //#include "IO_EXFastClock.h"  // FastClock driver
 //#include "IO_PCA9555.h"     // 16-bit I/O expander (NXP & Texas Instruments).
-//#include "IO_I2CDFPlayer.h" // DFPlayer over I2C
 //#include "IO_CMRI.h"      //  CMRI nodes
 
 //==========================================================================
@@ -276,27 +275,19 @@ void halSetup() {
 
 
   //=======================================================================
-  // Play mp3 files from a Micro-SD card, using a DFPlayer MP3 Module on a SC16IS750/SC16IS752 I2C UART
+  // Play mp3 files from a Micro-SD card, using a DFPlayer MP3 Module on a SC16IS752 I2C Dual UART
   //=======================================================================
-  // DFPlayer via NXP SC16IS752 I2C Dual UART.
+  // DFPlayer via NXP SC16IS752 I2C Dual UART. Each device has 2 UARTs on a single I2C address
+  // Total nr of devices on an I2C bus is 16, with 2 UARTs on each address making a total of 32 UARTs per I2C bus
   // I2C address range 0x48 - 0x57
-  // 
+  // I2CDFPlayer::create(1st vPin,vPins, I2C address, UART ch);
-  // Generic format: 
+
-  // I2CDFPlayer::create(1st vPin, vPins, I2C address, xtal);
+  // I2CDFPlayer::create(10000, 10, 0x48, 0);
-  // Parameters:
+  // I2CDFPlayer::create(10010, 10, 0x48, 1);
-  // 1st vPin     : First virtual pin that EX-Rail can control to play a sound, use PLAYSOUND command (alias of ANOUT)
+
-  // vPins        : Total number of virtual pins allocated (1 vPin is supported currently)
+  // Multiplexer example
-  //                1st vPin for UART 0
+  // I2CDFPlayer::create(10020, 10, {I2CMux_0, SubBus_0, 0x50}, 0);
-  // I2C Address  : I2C address of the serial controller, in 0x format
+
-  // xtal         : 0 for 1.8432Mhz, 1 for 14.7456Mhz
-  //
-  // The vPin is also a pin that can be read with the WAITFOR(vPin) command indicating if the DFPlayer has finished playing a track
-  //
-  
-  // I2CDFPlayer::create(10000,  1, 0x48, 1);
-  //
-  // Configuration example on a multiplexer
-  // I2CDFPlayer::create(10000, 1, {I2CMux_0, SubBus_0, 0x48}, 1);
 
 
 

platformio.ini

@@ -252,11 +252,6 @@ lib_deps = ${env.lib_deps}
 			stm32duino/STM32Ethernet @ ^1.3.0
 			stm32duino/STM32duino LwIP @ ^2.1.2
 			MDNS_Generic
-lib_ignore = WiFi101
-			WiFi101_Generic
-			WiFiEspAT
-			WiFiMulti_Generic
-			WiFiNINA_Generic
 build_flags = -std=c++17 -Os -g2 -Wunused-variable
 monitor_speed = 115200
 monitor_echo = yes
@@ -273,11 +268,6 @@ lib_deps = ${env.lib_deps}
 			stm32duino/STM32Ethernet @ ^1.3.0
 			stm32duino/STM32duino LwIP @ ^2.1.2
 			MDNS_Generic
-lib_ignore = WiFi101
-			WiFi101_Generic
-			WiFiEspAT
-			WiFiMulti_Generic
-			WiFiNINA_Generic
 build_flags = -std=c++17 -Os -g2 -Wunused-variable
 monitor_speed = 115200
 monitor_echo = yes

version.h

@@ -8,13 +8,6 @@
 // 5.3.3  - Fix Ethernet cable disconnected message, wait for DHCP
 // 5.3.2  - MDNS Generic library integration for Ethernet
 // 5.3.1  - Variable frequency for DC mode
-// 5.2.40 - Bugfix: WiThrottle sendIntro after initial N message as well
-// 5.2.29 - Added IO_I2CDFPlayer.h to support DFPLayer over I2C connected to NXP SC16IS750/SC16IS752 (currently only single UART for SC16IS752)
-//        - Added enhanced IO_I2CDFPLayer enum commands to EXRAIL2.h
-//        - Added PLAYSOUND alias of ANOUT to EXRAILMacros.h
-//        - Added UART detection to I2CManager.cpp
-// 5.2.28 - ESP32: Can all Wifi channels.
-//        - ESP32: Only write Wifi password to display if it is a well known one
 // 5.2.27 - Bugfix: IOExpander memory allocation
 // 5.2.26 - Silently ignore overridden HAL defaults
 //        - include HAL_IGNORE_DEFAULTS macro in EXRAIL 
@@ -31,7 +24,7 @@
 // 5.2.18 - Display network IP fix
 // 5.2.17 - ESP32 simplify network logic
 // 5.2.16 - Bugfix to allow for devices using the EX-IOExpander protocol to have no analogue or no digital pins
-//       df - I2C DFPlayper capability in stm32 branch
+//       df - I2C DFPlayper capability
 // 5.2.15 - move call to CommandDistributor::broadcastPower() into the TrackManager::setTrackPower(*) functions
 //        - add repeats to function packets that are not reminded in accordance with accessory packets
 // 5.2.14eth - Initial ethernet code for STM32F429ZI and F439ZI boards