#ifndef MotorDrivers_h
#define MotorDrivers_h

// *** PLEASE NOTE *** THIS FILE IS  **NOT**  INTENDED TO BE EDITED WHEN CONFIGURING A SYSTEM.
// It will be overwritten if the library is updated.

// This file contains configurations for known/supported motor shields.
// A configuration defined by macro here can be used in your sketch.
// A custom hardware setup will require your sketch to create MotorDriver instances
// similar to those defined here, WITHOUT editing this file.
   

const byte UNUSED_PIN = 255;

// MotorDriver(byte power_pin, byte signal_pin, byte signal_pin2, byte brake_pin, byte current_pin,
//             float senseFactor, unsigned int tripMilliamps, byte faultPin);
    
// Arduino standard Motor Shield
#define STANDARD_MOTOR_SHIELD    F("STANDARD_MOTOR_SHIELD"), \
   new MotorDriver(3 , 12, UNUSED_PIN, UNUSED_PIN, A0, 2.99, 2000, UNUSED_PIN),    \
   new MotorDriver(11, 13, UNUSED_PIN, UNUSED_PIN, A1, 2.99, 250 , UNUSED_PIN) 

// Pololu Motor Shield
#define POLOLU_MOTOR_SHIELD  F("POLOLU_MOTOR_SHIELD"),    \
   new MotorDriver(4, 7, UNUSED_PIN, 9 , A0, 18, 2000, 12),    \
   new MotorDriver(2, 8, UNUSED_PIN, 10, A1, 18, 250 , UNUSED_PIN) 

// Firebox Mk1 
#define FIREBOX_MK1     F("FIREBOX_MK1"),    \
   new MotorDriver(3, 6, 7, UNUSED_PIN, A5, 9.766, 5500, UNUSED_PIN),    \
   new MotorDriver(4, 8, 9, UNUSED_PIN, A1, 5.00, 250 , UNUSED_PIN) 

// Firebox Mk1S 
#define FIREBOX_MK1S    F("FIREBOX_MK1A"), \
   new MotorDriver(24, 21, 22, 25, 23, 9.766, 5500, UNUSED_PIN),    \
   new MotorDriver(30, 27, 28, 31, 29, 5.00, 250 , UNUSED_PIN) 

// FunduMoto Motor Shield
#define FUNDUMOTO_SHIELD    F("FUNDUMOTO_SHIELD"), \
   new MotorDriver(10 , 12, UNUSED_PIN, 9, A0, 2.99, 2000, UNUSED_PIN),    \
   new MotorDriver(11, 13, UNUSED_PIN, UNUSED_PIN, A1, 2.99, 250 , UNUSED_PIN)

#endif