/*
 *  © 2023, Neil McKechnie
 *  © 2022 Paul M Antoine
 *  All rights reserved.
 *
 *  This file is part of CommandStation-EX
 *
 *  This is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *
 *  It is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
 */

#ifndef I2CMANAGER_NONBLOCKING_H
#define I2CMANAGER_NONBLOCKING_H

#include <Arduino.h>
#include "I2CManager.h"
#if defined(I2C_USE_INTERRUPTS)
// atomic.h isn't available on SAMD, and likely others too...
#if defined(__AVR__)
#include <util/atomic.h>
#elif defined(__arm__)
// Helper assembly language functions
static __inline__ uint8_t my_iSeiRetVal(void)
{
    __asm__ __volatile__ ("cpsie i" ::);
    return 1;
}

static __inline__ uint8_t my_iCliRetVal(void)
{
    __asm__ __volatile__ ("cpsid i" ::);
    return 1;
}

static __inline__ void my_iRestore(const  uint32_t *__s)
{
    uint32_t res = *__s;
    __asm__ __volatile__ ("MSR primask, %0" : : "r" (res) );
}

static __inline__ uint32_t my_iGetIReg( void )
{
        uint32_t reg;
        __asm__ __volatile__ ("MRS %0, primask" : "=r" (reg) );
        return reg;
}
// Macros for atomic isolation
#define MY_ATOMIC_RESTORESTATE uint32_t _sa_saved                           \
    __attribute__((__cleanup__(my_iRestore))) = my_iGetIReg()

#define ATOMIC()                                                         \
for ( MY_ATOMIC_RESTORESTATE, _done =  my_iCliRetVal();                   \
    _done; _done = 0 )

#define ATOMIC_BLOCK(x) ATOMIC()
#define ATOMIC_RESTORESTATE
#endif
#else
#define ATOMIC_BLOCK(x) 
#define ATOMIC_RESTORESTATE
#endif

// This module is only compiled if I2C_USE_WIRE is not defined, so undefine it here
// to get intellisense to work correctly.
#if defined(I2C_USE_WIRE)
#undef I2C_USE_WIRE
#endif

/***************************************************************************
 * Initialise the I2CManagerAsync class.
 ***************************************************************************/
void I2CManagerClass::_initialise()
{
  queueHead = queueTail = NULL;
  state = I2C_STATE_FREE;
  I2C_init();
  _setClock(_clockSpeed);
}

/***************************************************************************
 *  Set I2C clock speed.  Normally 100000 (Standard) or 400000 (Fast)
 *   on Arduino.  Mega4809 supports 1000000 (Fast+) too.
 *   This function saves the desired clock speed and the startTransaction
 *   function acts on it before a new transaction, to avoid speed changes
 *   during an I2C transaction.
 ***************************************************************************/
void I2CManagerClass::_setClock(unsigned long i2cClockSpeed) {
  pendingClockSpeed = i2cClockSpeed;
}

/***************************************************************************
 * Helper function to start operations, if the I2C interface is free and
 * there is a queued request to be processed.
 * If there's an I2C clock speed change pending, then implement it before 
 * starting the operation.
 ***************************************************************************/
void I2CManagerClass::startTransaction() {
  ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
    if ((state == I2C_STATE_FREE) && (queueHead != NULL)) {
      state = I2C_STATE_ACTIVE;
      // Check for pending clock speed change
      if (pendingClockSpeed) {
        // We're about to start a new I2C transaction, so set clock now.
        I2C_setClock(pendingClockSpeed);
        pendingClockSpeed = 0;
      }
      startTime = micros();
      currentRequest = queueHead;
      rxCount = txCount = 0;
      // Copy key fields to static data for speed.
      operation = currentRequest->operation & OPERATION_MASK;
      // Start the I2C process going.
      I2C_sendStart();
    }
  }
}

/***************************************************************************
 *  Function to queue a request block and initiate operations.
 ***************************************************************************/
void I2CManagerClass::queueRequest(I2CRB *req) {
  req->status = I2C_STATUS_PENDING;
  req->nextRequest = NULL;

  ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
    if (!queueTail) 
      queueHead = queueTail = req;  // Only item on queue
    else
      queueTail = queueTail->nextRequest = req; // Add to end
    startTransaction();
  }

}

/***************************************************************************
 *  Initiate a write to an I2C device (non-blocking operation)
 ***************************************************************************/
uint8_t I2CManagerClass::write(I2CAddress i2cAddress, const uint8_t *writeBuffer, uint8_t writeLen, I2CRB *req) {
  // Make sure previous request has completed.
  req->wait();
  req->setWriteParams(i2cAddress, writeBuffer, writeLen);
  queueRequest(req);
  return I2C_STATUS_OK;
}

/***************************************************************************
 *  Initiate a write from PROGMEM (flash) to an I2C device (non-blocking operation)
 ***************************************************************************/
uint8_t I2CManagerClass::write_P(I2CAddress i2cAddress, const uint8_t * writeBuffer, uint8_t writeLen, I2CRB *req) {
  // Make sure previous request has completed.
  req->wait();
  req->setWriteParams(i2cAddress, writeBuffer, writeLen);
  req->operation = OPERATION_SEND_P;
  queueRequest(req);
  return I2C_STATUS_OK;
}

/***************************************************************************
 *  Initiate a read from the I2C device, optionally preceded by a write 
 *   (non-blocking operation)
 ***************************************************************************/
uint8_t I2CManagerClass::read(I2CAddress i2cAddress, uint8_t *readBuffer, uint8_t readLen, 
    const uint8_t *writeBuffer, uint8_t writeLen, I2CRB *req)
{
  // Make sure previous request has completed.
  req->wait();
  req->setRequestParams(i2cAddress, readBuffer, readLen, writeBuffer, writeLen);
  queueRequest(req);
  return I2C_STATUS_OK;
}

/***************************************************************************
 *  Set I2C timeout value in microseconds.  The timeout applies to the entire
 *   I2CRB request, e.g. where a write+read is performed, the timer is not
 *   reset before the read.
 ***************************************************************************/
void I2CManagerClass::setTimeout(unsigned long value) { 
  timeout = value; 
};

/***************************************************************************
 * checkForTimeout() function, called from isBusy() and wait() to cancel
 * requests that are taking too long to complete.  Such faults
 * may be caused by an I2C wire short for example.
 ***************************************************************************/
void I2CManagerClass::checkForTimeout() {
  ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
    I2CRB *t = queueHead;
    if (state==I2C_STATE_ACTIVE && t!=0 && t==currentRequest && timeout > 0) {
      // Check for timeout
      unsigned long elapsed = micros() - startTime;
      if (elapsed > timeout) { 
#ifdef DIAG_IO
        //DIAG(F("I2CManager Timeout on x%x, I2CRB=x%x"), (int)t->i2cAddress, currentRequest);
#endif
        // Excessive time. Dequeue request
        queueHead = t->nextRequest;
        if (!queueHead) queueTail = NULL;
        currentRequest = NULL;
        bytesToReceive = bytesToSend = 0;
        // Post request as timed out.
        t->status = I2C_STATUS_TIMEOUT;
        // Reset TWI interface so it is able to continue
        // Try close and init, not entirely satisfactory but sort of works...
        I2C_close();  // Shutdown and restart twi interface

        // If SDA is stuck low, issue up to 9 clock pulses to attempt to free it.
        pinMode(SCL, INPUT_PULLUP);
        pinMode(SDA, INPUT_PULLUP);
        for (int i=0; !digitalRead(SDA) && i<9; i++) {
          digitalWrite(SCL, 0); 
          pinMode(SCL, OUTPUT);         // Force clock low
          delayMicroseconds(10);        // ... for 5us
          pinMode(SCL, INPUT_PULLUP);   // ... then high
          delayMicroseconds(10);        // ... for 5us (100kHz Clock)
        }
        // Whether that's succeeded or not, now try reinitialising.
        I2C_init();
        _setClock(_clockSpeed);
        state = I2C_STATE_FREE;
        
        // Initiate next queued request if any.
        startTransaction();
      }
    }
  }
}

/***************************************************************************
 *  Loop function, for general background work
 ***************************************************************************/
void I2CManagerClass::loop() {
#if !defined(I2C_USE_INTERRUPTS)
  handleInterrupt();
#endif
  // Call function to monitor for stuch I2C operations.
  checkForTimeout();
}

/***************************************************************************
 * Interupt handler.  Call I2C state machine, and dequeue request
 * if completed.
 ***************************************************************************/
void I2CManagerClass::handleInterrupt() {

  // Update hardware state machine
  I2C_handleInterrupt();

  // Check if current request has completed.  If there's a current request
  // and state isn't active then state contains the completion status of the request.
  if (state != I2C_STATE_ACTIVE && currentRequest != NULL) {
    // Operation has completed.
    if (state == I2C_STATUS_OK || ++retryCounter > MAX_I2C_RETRIES
      || currentRequest->operation & OPERATION_NORETRY) 
    {
      // Status is OK, or has failed and retry count exceeded, or retries disabled.
      // Remove completed request from head of queue
      I2CRB * t = queueHead;
      if (t == currentRequest) {
        queueHead = t->nextRequest;
        if (!queueHead) queueTail = queueHead;
        t->nBytes = rxCount;
        t->status = state;
        
        // I2C state machine is now free for next request
        currentRequest = NULL;
        state = I2C_STATE_FREE;
      }
      retryCounter = 0;
    } else {
      // Status is failed and retry permitted.
      // Retry previous request.
      state = I2C_STATE_FREE;  
    }
  }

  if (state == I2C_STATE_FREE && queueHead != NULL) {
    // Allow any pending interrupts before starting the next request.
    interrupts();
    // Start next request
    I2CManager.startTransaction();
  }
}

// Fields in I2CManager class specific to Non-blocking implementation.
I2CRB * volatile I2CManagerClass::queueHead = NULL;
I2CRB * volatile I2CManagerClass::queueTail = NULL;
I2CRB * volatile I2CManagerClass::currentRequest = NULL;
volatile uint8_t I2CManagerClass::state = I2C_STATE_FREE;
volatile uint8_t I2CManagerClass::txCount;
volatile uint8_t I2CManagerClass::rxCount;
volatile uint8_t I2CManagerClass::operation;
volatile uint8_t I2CManagerClass::bytesToSend;
volatile uint8_t I2CManagerClass::bytesToReceive;
volatile unsigned long I2CManagerClass::startTime;
uint8_t I2CManagerClass::retryCounter = 0;

#if defined(I2C_EXTENDED_ADDRESS) 
volatile uint8_t I2CManagerClass::muxSendStep = 0;
#endif

#endif