/* * © 2021 Neil McKechnie * © 2020-2022 Chris Harlow * © 2022 Colin Murdoch * © 2023 Harald Barth * All rights reserved. * * This file is part of CommandStation-EX * * This is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * It is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with CommandStation. If not, see . */ #ifndef EXRAIL2_H #define EXRAIL2_H #include "FSH.h" #include "IODevice.h" #include "Turnouts.h" #include "Turntables.h" // The following are the operation codes (or instructions) for a kind of virtual machine. // Each instruction is normally 3 bytes long with an operation code followed by a parameter. // In cases where more than one parameter is required, the first parameter is followed by one // or more OPCODE_PAD instructions with the subsequent parameters. This wastes a byte but makes // searching easier as a parameter can never be confused with an opcode. // enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE, OPCODE_FWD,OPCODE_REV,OPCODE_SPEED,OPCODE_INVERT_DIRECTION, OPCODE_RESERVE,OPCODE_FREE, OPCODE_AT,OPCODE_AFTER,OPCODE_AUTOSTART, OPCODE_ATGTE,OPCODE_ATLT, OPCODE_ATTIMEOUT1,OPCODE_ATTIMEOUT2, OPCODE_LATCH,OPCODE_UNLATCH,OPCODE_SET,OPCODE_RESET, OPCODE_ENDIF,OPCODE_ELSE, OPCODE_DELAY,OPCODE_DELAYMINS,OPCODE_DELAYMS,OPCODE_RANDWAIT, OPCODE_FON,OPCODE_FOFF,OPCODE_XFON,OPCODE_XFOFF, OPCODE_RED,OPCODE_GREEN,OPCODE_AMBER,OPCODE_DRIVE, OPCODE_SERVO,OPCODE_SIGNAL,OPCODE_TURNOUT,OPCODE_WAITFOR, OPCODE_PAD,OPCODE_FOLLOW,OPCODE_CALL,OPCODE_RETURN, #ifndef DISABLE_PROG OPCODE_JOIN,OPCODE_UNJOIN,OPCODE_READ_LOCO1,OPCODE_READ_LOCO2, #endif OPCODE_POM, OPCODE_START,OPCODE_SETLOCO,OPCODE_SENDLOCO,OPCODE_FORGET, OPCODE_PAUSE, OPCODE_RESUME,OPCODE_POWEROFF,OPCODE_POWERON, OPCODE_ONCLOSE, OPCODE_ONTHROW, OPCODE_SERVOTURNOUT, OPCODE_PINTURNOUT, OPCODE_PRINT,OPCODE_DCCACTIVATE, OPCODE_ONACTIVATE,OPCODE_ONDEACTIVATE, OPCODE_ROSTER,OPCODE_KILLALL, OPCODE_ROUTE,OPCODE_AUTOMATION,OPCODE_SEQUENCE, OPCODE_ENDTASK,OPCODE_ENDEXRAIL, OPCODE_SET_TRACK, OPCODE_ONRED,OPCODE_ONAMBER,OPCODE_ONGREEN, OPCODE_ONCHANGE, OPCODE_ONCLOCKTIME, OPCODE_ONTIME, #ifndef IO_NO_HAL OPCODE_TTADDPOSITION,OPCODE_DCCTURNTABLE,OPCODE_EXTTTURNTABLE, OPCODE_ONROTATE,OPCODE_ROTATE,OPCODE_IFTTPOSITION,OPCODE_WAITFORTT, #endif // OPcodes below this point are skip-nesting IF operations // placed here so that they may be skipped as a group // see skipIfBlock() IF_TYPE_OPCODES, // do not move this... OPCODE_IFRED,OPCODE_IFAMBER,OPCODE_IFGREEN, OPCODE_IFGTE,OPCODE_IFLT, OPCODE_IFTIMEOUT, OPCODE_IF,OPCODE_IFNOT, OPCODE_IFRANDOM,OPCODE_IFRESERVE, OPCODE_IFCLOSED,OPCODE_IFTHROWN, OPCODE_IFRE, OPCODE_IFLOCO }; // Ensure thrunge_lcd is put last as there may be more than one display, // sequentially numbered from thrunge_lcd. enum thrunger: byte { thrunge_print, thrunge_broadcast, thrunge_withrottle, thrunge_serial,thrunge_parse, thrunge_serial1, thrunge_serial2, thrunge_serial3, thrunge_serial4, thrunge_serial5, thrunge_serial6, thrunge_lcn, thrunge_lcd, // Must be last!! }; // Flag bits for status of hardware and TPL static const byte SECTION_FLAG = 0x80; static const byte LATCH_FLAG = 0x40; static const byte TASK_FLAG = 0x20; static const byte SPARE_FLAG = 0x10; static const byte SIGNAL_MASK = 0x0C; static const byte SIGNAL_RED = 0x08; static const byte SIGNAL_AMBER = 0x0C; static const byte SIGNAL_GREEN = 0x04; static const byte MAX_STACK_DEPTH=4; static const short MAX_FLAGS=256; #define FLAGOVERFLOW(x) x>=MAX_FLAGS class LookList { public: LookList(int16_t size); void add(int16_t lookup, int16_t result); int16_t find(int16_t value); private: int16_t m_size; int16_t m_loaded; int16_t * m_lookupArray; int16_t * m_resultArray; }; class RMFT2 { public: static void begin(); static void loop(); RMFT2(int progCounter); RMFT2(int route, uint16_t cab); ~RMFT2(); static void readLocoCallback(int16_t cv); static void createNewTask(int route, uint16_t cab); static void turnoutEvent(int16_t id, bool closed); static void activateEvent(int16_t addr, bool active); static void changeEvent(int16_t id, bool change); static void clockEvent(int16_t clocktime, bool change); static void rotateEvent(int16_t id, bool change); static const int16_t SERVO_SIGNAL_FLAG=0x4000; static const int16_t ACTIVE_HIGH_SIGNAL_FLAG=0x2000; static const int16_t DCC_SIGNAL_FLAG=0x1000; static const int16_t SIGNAL_ID_MASK=0x0FFF; // Throttle Info Access functions built by exrail macros static const byte rosterNameCount; static const int16_t HIGHFLASH routeIdList[]; static const int16_t HIGHFLASH automationIdList[]; static const int16_t HIGHFLASH rosterIdList[]; static const FSH * getRouteDescription(int16_t id); static char getRouteType(int16_t id); static const FSH * getTurnoutDescription(int16_t id); static const FSH * getRosterName(int16_t id); static const FSH * getRosterFunctions(int16_t id); static const FSH * getTurntableDescription(int16_t id); static const FSH * getTurntablePositionDescription(int16_t turntableId, uint8_t positionId); private: static void ComandFilter(Print * stream, byte & opcode, byte & paramCount, int16_t p[]); static bool parseSlash(Print * stream, byte & paramCount, int16_t p[]) ; static void streamFlags(Print* stream); static bool setFlag(VPIN id,byte onMask, byte OffMask=0); static bool getFlag(VPIN id,byte mask); static int16_t progtrackLocoId; static void doSignal(int16_t id,char rag); static bool isSignal(int16_t id,char rag); static int16_t getSignalSlot(int16_t id); static void setTurnoutHiddenState(Turnout * t); #ifndef IO_NO_HAL static void setTurntableHiddenState(Turntable * tto); #endif static LookList* LookListLoader(OPCODE op1, OPCODE op2=OPCODE_ENDEXRAIL,OPCODE op3=OPCODE_ENDEXRAIL); static void handleEvent(const FSH* reason,LookList* handlers, int16_t id); static uint16_t getOperand(int progCounter,byte n); static RMFT2 * loopTask; static RMFT2 * pausingTask; void delayMe(long millisecs); void driveLoco(byte speedo); bool readSensor(uint16_t sensorId); bool skipIfBlock(); bool readLoco(); void loop2(); void kill(const FSH * reason=NULL,int operand=0); void printMessage(uint16_t id); // Built by RMFTMacros.h void printMessage2(const FSH * msg); void thrungeString(uint32_t strfar, thrunger mode, byte id=0); uint16_t getOperand(byte n); static bool diag; static const HIGHFLASH byte RouteCode[]; static const HIGHFLASH int16_t SignalDefinitions[]; static byte flags[MAX_FLAGS]; static LookList * sequenceLookup; static LookList * onThrowLookup; static LookList * onCloseLookup; static LookList * onActivateLookup; static LookList * onDeactivateLookup; static LookList * onRedLookup; static LookList * onAmberLookup; static LookList * onGreenLookup; static LookList * onChangeLookup; static LookList * onClockLookup; #ifndef IO_NO_HAL static LookList * onRotateLookup; #endif // Local variables - exist for each instance/task RMFT2 *next; // loop chain int progCounter; // Byte offset of next route opcode in ROUTES table unsigned long delayStart; // Used by opcodes that must be recalled before completing unsigned long delayTime; union { unsigned long waitAfter; // Used by OPCODE_AFTER unsigned long timeoutStart; // Used by OPCODE_ATTIMEOUT }; bool timeoutFlag; byte taskId; uint16_t loco; bool forward; bool invert; byte speedo; int onEventStartPosition; byte stackDepth; int callStack[MAX_STACK_DEPTH]; }; #endif