mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-11-22 15:46:14 +01:00
f348857ddb
FLAGS HAL device added to IODevice.h, which allows use of SET/RESET/<Z>/<T> to set and reset a VPIN state, and to allow <S>/IF/IFNOT/AT/WAITFOR/etc. to monitor the VPIN state. Also, correct handling of VPINs above 32767 in DIAG calls within IODevice.cpp and IODevice.h.
466 lines
17 KiB
Plaintext
466 lines
17 KiB
Plaintext
#include "defines.h"
|
|
#include "IODevice.h"
|
|
|
|
#ifndef IO_NO_HAL
|
|
|
|
#include "IO_VL53L0X.h"
|
|
#include "IO_HCSR04.h"
|
|
#include "Sensors.h"
|
|
#include "Turnouts.h"
|
|
#include "IO_DFPlayer.h"
|
|
//#include "IO_Wire.h"
|
|
#include "IO_AnalogueInputs.h"
|
|
#if __has_include("IO_Servo.h")
|
|
#include "IO_Servo.h"
|
|
#include "IO_PCA9685pwm.h"
|
|
#endif
|
|
|
|
#include "IO_HALDisplay.h"
|
|
#include "LiquidCrystal_I2C.h"
|
|
|
|
#if __has_include("IO_CMRI.h")
|
|
#include "IO_CMRI.h"
|
|
#endif
|
|
|
|
//#include "IO_ExampleSerial.h"
|
|
|
|
//#include "IO_EXFastclock.h"
|
|
//#include "IO_EXTurntable.h"
|
|
|
|
#if __has_include("IO_ExternalEEPROM.h")
|
|
#include "IO_ExternalEEPROM.h"
|
|
#endif
|
|
|
|
#if __has_include("IO_Network.h")
|
|
#include "IO_Network.h"
|
|
#include "Net_RF24.h"
|
|
#include "Net_ENC28J60.h"
|
|
#include "Net_Ethernet.h"
|
|
#define NETWORK_PRESENT
|
|
#endif
|
|
|
|
#include "IO_TouchKeypad.h"
|
|
|
|
#define WIRE_TEST 0
|
|
#define TESTHARNESS 1
|
|
#define I2C_STRESS_TEST 0
|
|
#define I2C_SETCLOCK 0
|
|
|
|
#include "DCC.h"
|
|
|
|
|
|
#if 0 // Long Strings
|
|
#define s10 "0123456789"
|
|
#define s100 s10 s10 s10 s10 s10 s10 s10 s10 s10 s10
|
|
#define s1k s100 s100 s100 s100 s100 s100 s100 s100 s100 s100
|
|
#define s10k s1k s1k s1k s1k s1k s1k s1k s1k s1k s1k
|
|
#define s32k s10k s10k s10k s1k s1k
|
|
volatile const char PROGMEM ss1[] = s32k;
|
|
#endif
|
|
|
|
|
|
#if TESTHARNESS
|
|
|
|
// Function to be invoked by test harness
|
|
void myTest() {
|
|
// DIAG(F("VL53L0X #1 Test: dist=%d signal=%d ambient=%d value=%d"),
|
|
// IODevice::readAnalogue(5000),
|
|
// IODevice::readAnalogue(5001),
|
|
// IODevice::readAnalogue(5002),
|
|
// IODevice::read(5000));
|
|
// DIAG(F("VL53L0X #2 Test: dist=%d signal=%d ambient=%d value=%d"),
|
|
// IODevice::readAnalogue(5003),
|
|
// IODevice::readAnalogue(5004),
|
|
// IODevice::readAnalogue(5005),
|
|
// IODevice::read(5003));
|
|
// DIAG(F("HCSR04 Test: dist=%d value=%d"),
|
|
// IODevice::readAnalogue(2000),
|
|
// IODevice::read(2000));
|
|
// DIAG(F("ADS111x Test: %d %d %d %d %d"),
|
|
// IODevice::readAnalogue(4500),
|
|
// IODevice::readAnalogue(4501),
|
|
// IODevice::readAnalogue(4502),
|
|
// IODevice::readAnalogue(4503),
|
|
// IODevice::readAnalogue(A5)
|
|
// );
|
|
// DIAG(F("RF24 Test: 4000:%d 4002:%d"),
|
|
// IODevice::read(4000),
|
|
// IODevice::read(4002)
|
|
// );
|
|
DIAG(F("EXPANDER: 2212:%d 2213:%d 2214:%d"),
|
|
IODevice::readAnalogue(2212),
|
|
IODevice::readAnalogue(2213),
|
|
IODevice::readAnalogue(2214));
|
|
}
|
|
#endif
|
|
|
|
#if I2C_STRESS_TEST
|
|
static bool initialised = false;
|
|
static uint8_t lastStatus = 0;
|
|
static const int nRBs = 3; // request blocks concurrently
|
|
static const int I2cTestPeriod = 1; // milliseconds
|
|
static I2CAddress testDevice = {SubBus_6, 0x27};
|
|
static I2CRB rb[nRBs];
|
|
static uint8_t readBuffer[nRBs*32]; // nRB x 32-byte input buffer
|
|
static uint8_t writeBuffer[nRBs]; // nRB x 1-byte output buffer
|
|
static unsigned long count = 0;
|
|
static unsigned long errors = 0;
|
|
static unsigned long lastOutput = millis();
|
|
|
|
void I2CTest() {
|
|
if (!initialised) {
|
|
// I2C Loading for stress test.
|
|
// Write value then read back 32 times
|
|
for (int i=0; i<nRBs; i++) {
|
|
writeBuffer[i] = (0xc5 ^ i ^ i<<3 ^ i<<6) & ~0x08; // bit corresponding to 08 is hard-wired low
|
|
rb[i].setRequestParams(testDevice, &readBuffer[i*32], 32,
|
|
&writeBuffer[i], 1);
|
|
I2CManager.queueRequest(&rb[i]);
|
|
}
|
|
initialised = true;
|
|
}
|
|
|
|
for (int i=0; i<nRBs; i++) {
|
|
if (!rb[i].isBusy()) {
|
|
count++;
|
|
uint8_t status = rb[i].status;
|
|
if (status != lastStatus) {
|
|
DIAG(F("I2CTest: status=%d (%S)"),
|
|
(int)status, I2CManager.getErrorMessage(status));
|
|
lastStatus = status;
|
|
}
|
|
if (status == I2C_STATUS_OK) {
|
|
bool diff = false;
|
|
// Check contents of response
|
|
for (uint8_t j=0; j<32; j++) {
|
|
if (readBuffer[i*32+j] != writeBuffer[i]) {
|
|
DIAG(F("I2CTest: Received message mismatch, sent %2x rcvd %2x"),
|
|
writeBuffer[i], readBuffer[i*32+j]);
|
|
diff = true;
|
|
}
|
|
}
|
|
if (diff) errors++;
|
|
} else
|
|
errors++;
|
|
I2CManager.queueRequest(&rb[i]);
|
|
}
|
|
}
|
|
if (millis() - lastOutput > 60000) { // 1 minute
|
|
DIAG(F("I2CTest: Count=%l Errors=%l"), count, errors);
|
|
count = errors = 0;
|
|
lastOutput = millis();
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void updateLocoScreen() {
|
|
for (int i=0; i<8; i++) {
|
|
if (DCC::speedTable[i].loco > 0) {
|
|
int speed = DCC::speedTable[i].speedCode;
|
|
char direction = (speed & 0x80) ? 'R' : 'F';
|
|
speed = speed & 0x7f;
|
|
if (speed > 0) speed = speed - 1;
|
|
SCREEN(3, i, F("Loco:%4d %3d %c"), DCC::speedTable[i].loco,
|
|
speed, direction);
|
|
}
|
|
}
|
|
}
|
|
|
|
void updateTime() {
|
|
uint8_t buffer[20];
|
|
I2CAddress rtc = {SubBus_1, 0x68}; // Real-time clock I2C address
|
|
buffer[0] = 0;
|
|
|
|
// Set time - only needs to be done once if battery is ok.
|
|
static bool timeSet = false;
|
|
if (!timeSet) {
|
|
// I2CManager.read(rtc, buffer+1, sizeof(buffer)-1);
|
|
// uint8_t year = 23; // 2023
|
|
// uint8_t day = 2; // tuesday
|
|
// uint8_t date = 21; // 21st
|
|
// uint8_t month = 2; // feb
|
|
// uint8_t hours = 23; // xx:
|
|
// uint8_t minutes = 25; // :xx
|
|
// buffer[1] = 0; // seconds
|
|
// buffer[2] = ((minutes / 10) << 4) | (minutes % 10);
|
|
// buffer[3] = ((hours / 10) << 4) | (hours % 10);
|
|
// buffer[4] = day;
|
|
// buffer[5] = ((date/10) << 4) + date%10; // 24th
|
|
// buffer[6] = ((month/10) << 4) + month%10; // feb
|
|
// buffer[7] = ((year/10) << 4) + year%10; // xx23
|
|
// for (uint8_t i=8; i<sizeof(buffer); i++) buffer[i] = 0;
|
|
// I2CManager.write(rtc, buffer, sizeof(buffer));
|
|
timeSet = true;
|
|
}
|
|
|
|
uint8_t status = I2CManager.read(rtc, buffer+1, sizeof(buffer)-1, 1, 0);
|
|
if (status == I2C_STATUS_OK) {
|
|
uint8_t seconds10 = buffer[1] >> 4;
|
|
uint8_t seconds1 = buffer[1] & 0xf;
|
|
uint8_t minutes10 = buffer[2] >> 4;
|
|
uint8_t minutes1 = buffer[2] & 0xf;
|
|
uint8_t hours10 = buffer[3] >> 4;
|
|
uint8_t hours1 = buffer[3] & 0xf;
|
|
SCREEN(10, 0, F("Departures %d%d:%d%d:%d%d"),
|
|
hours10, hours1, minutes10, minutes1, seconds10, seconds1);
|
|
}
|
|
}
|
|
|
|
void showCharacterSet() {
|
|
if (millis() < 3000) return;
|
|
const uint8_t lineLen = 20;
|
|
char buffer[lineLen+1];
|
|
static uint8_t nextChar = 0x20;
|
|
for (uint8_t row=0; row<8; row+=1) {
|
|
for (uint8_t col=0; col<lineLen; col++) {
|
|
buffer[col] = nextChar++;
|
|
buffer[++col] = ' ';
|
|
if (nextChar == 0) nextChar = 0x20; // check for wrap-around
|
|
}
|
|
buffer[lineLen] = '\0';
|
|
SCREEN(3, row, F("%s"), buffer);
|
|
}
|
|
}
|
|
|
|
#if defined(ARDUINO_NUCLEO_F446RE)
|
|
HardwareSerial Serial3(PC11, PC10);
|
|
#endif
|
|
|
|
|
|
// HAL device initialisation
|
|
void halSetup() {
|
|
|
|
I2CManager.setTimeout(500); // microseconds
|
|
I2CManager.forceClock(400000);
|
|
|
|
HALDisplay<OLED>::create(10, {SubBus_5, 0x3c}, 132, 64); // SH1106
|
|
// UserAddin::create(updateLocoScreen, 1000);
|
|
// UserAddin::create(showCharacterSet, 5000);
|
|
// UserAddin::create(updateTime, 1000);
|
|
|
|
HALDisplay<OLED>::create(10, {SubBus_4, 0x3c}, 128, 32);
|
|
HALDisplay<OLED>::create(10, {SubBus_7, 0x3c}, 128, 32);
|
|
|
|
//HALDisplay<LiquidCrystal_I2C>::create(10, {SubBus_4, 0x27}, 20, 4);
|
|
|
|
// Draw double boxes with X O O X inside.
|
|
// SCREEN(3, 2, F("\xc9\xcd\xcd\xcd\xcb\xcd\xcd\xcd\xcb\xcd\xcd\xcd\xcb\xcd\xcd\xcd\xcb\xcd\xcd\xcd\xbb"));
|
|
// SCREEN(3, 3, F("\xba X \xba O \xba O \xba O \xba X \xba"));
|
|
// SCREEN(3, 4, F("\xcc\xcd\xcd\xcd\xce\xcd\xcd\xcd\xce\xcd\xcd\xcd\xce\xcd\xcd\xcd\xce\xcd\xcd\xcd\xb9"));
|
|
// SCREEN(3, 5, F("\xba X \xba O \xba O \xba O \xba X \xba"));
|
|
// SCREEN(3, 6, F("\xc8\xcd\xcd\xcd\xca\xcd\xcd\xcd\xca\xcd\xcd\xcd\xca\xcd\xcd\xcd\xca\xcd\xcd\xcd\xbc"));
|
|
|
|
// Draw single boxes with X O O X inside.
|
|
// SCREEN(3, 0, F("Summary Data:"));
|
|
// SCREEN(3, 1, F("\xda\xc4\xc4\xc4\xc2\xc4\xc4\xc4\xc2\xc4\xc4\xc4\xc2\xc4\xc4\xc4\xc2\xc4\xc4\xc4\xbf"));
|
|
// SCREEN(3, 2, F("\xb3 X \xb3 O \xb3 O \xb3 O \xb3 X \xb3"));
|
|
// SCREEN(3, 3, F("\xc3\xc4\xc4\xc4\xc5\xc4\xc4\xc4\xc5\xc4\xc4\xc4\xc5\xc4\xc4\xc4\xc5\xc4\xc4\xc4\xb4"));
|
|
// SCREEN(3, 4, F("\xb3 X \xb3 O \xb3 O \xb3 O \xb3 X \xb3"));
|
|
// SCREEN(3, 5, F("\xc3\xc4\xc4\xc4\xc5\xc4\xc4\xc4\xc5\xc4\xc4\xc4\xc5\xc4\xc4\xc4\xc5\xc4\xc4\xc4\xb4"));
|
|
// SCREEN(3, 6, F("\xb3 X \xb3 O \xb3 O \xb3 O \xb3 X \xb3"));
|
|
// SCREEN(3, 7, F("\xc0\xc4\xc4\xc4\xc1\xc4\xc4\xc4\xc1\xc4\xc4\xc4\xc1\xc4\xc4\xc4\xc1\xc4\xc4\xc4\xd9"));
|
|
|
|
// Blocks of different greyness
|
|
// SCREEN(3, 0, F("\xb0\xb0\xb0\xb0\xb1\xb1\xb1\xb1\xb2\xb2\xb2\xb2\xdb\xdb\xdb\xdb"));
|
|
// SCREEN(3, 1, F("\xb0\xb0\xb0\xb0\xb1\xb1\xb1\xb1\xb2\xb2\xb2\xb2\xdb\xdb\xdb\xdb"));
|
|
// SCREEN(3, 2, F("\xb0\xb0\xb0\xb0\xb1\xb1\xb1\xb1\xb2\xb2\xb2\xb2\xdb\xdb\xdb\xdb"));
|
|
|
|
// DCCEX logo
|
|
// SCREEN(3, 1, F("\xb0\xb0\x20\x20\x20\xb0\x20\x20\x20\xb0\x20\x20\x20\x20\xb0\xb0\xb0\x20\xb0\x20\xb0"));
|
|
// SCREEN(3, 2, F("\xb0\x20\xb0\x20\xb0\x20\xb0\x20\xb0\x20\xb0\x20\x20\x20\xb0\x20\x20\x20\xb0\x20\xb0"));
|
|
// SCREEN(3, 3, F("\xb0\x20\xb0\x20\xb0\x20\x20\x20\xb0\x20\x20\x20\xb0\x20\xb0\xb0\x20\x20\x20\xb0\x20"));
|
|
// SCREEN(3, 4, F("\xb0\x20\xb0\x20\xb0\x20\xb0\x20\xb0\x20\xb0\x20\x20\x20\xb0\x20\x20\x20\xb0\x20\xb0"));
|
|
// SCREEN(3, 5, F("\xb0\xb0\x20\x20\x20\xb0\x20\x20\x20\xb0\x20\x20\x20\x20\xb0\xb0\xb0\x20\xb0\x20\xb0"));
|
|
// SCREEN(3, 7, F("\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1\xb1"));
|
|
|
|
#if 0
|
|
// List versions of devices that respond to the version request
|
|
for (uint8_t address = 8; address<0x78; address++) {
|
|
uint8_t buffer[3];
|
|
uint8_t status = I2CManager.read(0x7c, buffer, sizeof(buffer), 1, address);
|
|
if (status == I2C_STATUS_OK) {
|
|
uint16_t manufacturer = ((uint16_t)buffer[0] << 4 ) | (buffer[1] >> 4);
|
|
uint16_t deviceID = ((uint16_t)(buffer[1] & 0x0f) << 5) | (buffer[2] >> 3);
|
|
uint16_t dieRevision = buffer[2] & 0x1f;
|
|
DIAG(F("Addr %s version: %x %x %x"), address.toString(), manufacturer, deviceID, dieRevision);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if I2C_STRESS_TEST
|
|
UserAddin::create(I2CTest, I2cTestPeriod);
|
|
#endif
|
|
|
|
#if WIRE_TEST
|
|
// Test of Wire-I2CManager interface
|
|
Wire.begin();
|
|
Wire.setClock(400000);
|
|
Wire.beginTransmission(0x23);
|
|
Wire.print("Hello");
|
|
uint8_t status = Wire.endTransmission();
|
|
if (status==0) DIAG(F("Wire: device Found on 0x23"));
|
|
|
|
Wire.beginTransmission(0x23);
|
|
Wire.write(0xde);
|
|
Wire.endTransmission(false); // don't send stop
|
|
Wire.requestFrom(0x23, 1);
|
|
if (Wire.available()) {
|
|
DIAG(F("Wire: value=x%x"), Wire.read());
|
|
}
|
|
uint8_t st = I2CManager.write(0x33, 0, 0);
|
|
DIAG(F("I2CManager 0x33 st=%d \"%S\""), st,
|
|
I2CManager.getErrorMessage(st));
|
|
#endif
|
|
|
|
#if I2C_SETCLOCK
|
|
// Test I2C clock changes
|
|
// Set up two I2C request blocks
|
|
I2CRB rb1, rb2;
|
|
uint8_t readBuff[32];
|
|
rb1.setRequestParams(0x23, readBuff, sizeof(readBuff), readBuff, sizeof(readBuff));
|
|
rb2.setRequestParams(0x23, readBuff, sizeof(readBuff), readBuff, sizeof(readBuff));
|
|
// First set clock to 400kHz and then issue requests
|
|
I2CManager.forceClock(400000);
|
|
I2CManager.queueRequest(&rb1);
|
|
I2CManager.queueRequest(&rb2);
|
|
// Wait a little to allow the first transaction to start
|
|
delayMicroseconds(2);
|
|
// ... then request a clock speed change
|
|
I2CManager.forceClock(100000);
|
|
DIAG(F("I2CClock: rb1 status=%d"), rb1.wait());
|
|
DIAG(F("I2CClock: rb2 status=%d"), rb2.wait());
|
|
// Reset clock speed
|
|
I2CManager.forceClock(400000);
|
|
#endif
|
|
|
|
EXIOExpander::create(2200, 18, {SubBus_0, 0x65});
|
|
//UserAddin::create(myTest, 1000);
|
|
// ServoTurnout::create(2200, 2200, 400, 200, 0);
|
|
// ServoTurnout::create(2200, 2200, 400, 200, 0);
|
|
|
|
TouchKeypad::create(2300, 16, 25, 24);
|
|
|
|
// GPIO
|
|
PCF8574::create(800, 8, {SubBus_1, 0x23});
|
|
//PCF8574::create(808, 8, {SubBus_2, 0x27});
|
|
PCF8574::create(65000, 8, 0x27);
|
|
|
|
MCP23017::create(164,16,{SubBus_3, 0x20});
|
|
//MCP23017::create(180,16,{SubBus_0, 0x27});
|
|
Sensor::create(170, 170, 1); // Hall effect, enable pullup.
|
|
Sensor::create(171, 171, 1);
|
|
|
|
// PWM (LEDs and Servos)
|
|
// For servos, use default 50Hz pulses.
|
|
PCA9685::create(100, 16, {SubBus_1, 0x41});
|
|
// For LEDs, use 1kHz pulses.
|
|
PCA9685::create(116, 16, {SubBus_1, 0x40}, 1000);
|
|
|
|
// 4-pin Analogue Input Module
|
|
//ADS111x::create(4500, 4, 0x48);
|
|
|
|
// Laser Time-Of-Flight Sensors
|
|
VL53L0X::create(5000, 3, {SubBus_0, 0x60}, 300, 310, 46);
|
|
//VL53L0X::create(5003, 3, {SubBus_6, 0x61}, 300, 310, 47);
|
|
Sensor::create(5000, 5000, 0);
|
|
Sensor::create(5003, 5003, 0);
|
|
// Monitor reset digital on first TOF
|
|
//Sensor::create(46,46,0);
|
|
|
|
// // External 24C256 EEPROM (256kBytes) on I2C address 0x50.
|
|
// ExternalEEPROM::create({SubBus_0, 0x50}, 256);
|
|
|
|
// Play up to 10 sounds on pins 10000-10009. Player is connected to Serial1 or Serial2.
|
|
#if defined(HAVE_HWSERIAL1) && !defined(ARDUINO_ARCH_STM32)
|
|
DFPlayer::create(10000, 14, Serial1);
|
|
#elif defined(ARDUINO_ARCH_STM32)
|
|
DFPlayer::create(10000, 10, Serial3); // Pins PC11 (RX) and PC10 (TX)
|
|
#endif
|
|
|
|
// Ultrasound echo device
|
|
HCSR04::create(2000, 32, 33, 80, 85 /*, HCSR04::LOOP */);
|
|
Sensor::create(2000, 2000, 0);
|
|
|
|
#if __has_include("IO_CMRI.h")
|
|
CMRIbus::create(0, Serial2, 115200, 50, 40); // 50ms cycle, pin 40 for DE/!RE pins
|
|
CMRInode::create(25000, 72, 0, 0, 'M'); // SMINI address 0
|
|
for (int pin=0; pin<24; pin++) {
|
|
Sensor::create(25000+pin, 25000+pin, 0);
|
|
}
|
|
#endif
|
|
|
|
//CMRInode::create(25072, 72, 0, 13, 'M'); // SMINI address 13
|
|
//CMRInode::create(25144, 288, 0, 14, 'C', 144, 144); // CPNODE address 14
|
|
|
|
#ifdef NETWORK_PRESENT
|
|
// Define remote pins to be used. The range of remote pins is like a common data area shared
|
|
// between all nodes.
|
|
// For outputs, a write to a remote VPIN causes a message to be sent to another node, which then performs
|
|
// the write operation on the device VPIN that is local to that node.
|
|
// For inputs, the state of remote input VPIN is read on the node where it is connected, and then
|
|
// sent to other nodes in the system where the state is saved and processed. Updates are sent on change, and
|
|
// also periodically if no changes.
|
|
//
|
|
// Each definition is a triple of remote node, remote pin, indexed by relative pin. Up to 224 rpins can
|
|
// be configured (per node). This is to fit into a 32-byte packet.
|
|
REMOTEPINS rpins[] = {
|
|
{30,164,RPIN_IN} , //4000 Node 30, first MCP23017 pin, input
|
|
{30,165,RPIN_IN}, //4001 Node 30, second MCP23017 pin, input
|
|
{30,166,RPIN_OUT}, //4002 Node 30, third MCP23017 pin, output
|
|
{30,166,RPIN_OUT}, //4003 Node 30, fourth MCP23017 pin, output
|
|
{30,100,RPIN_INOUT}, //4004 Node 30, first PCA9685 servo pin
|
|
{30,101,RPIN_INOUT}, //4005 Node 30, second PCA9685 servo pin
|
|
{30,102,RPIN_INOUT}, //4006 Node 30, third PCA9685 servo pin
|
|
{30,103,RPIN_INOUT}, //4007 Node 30, fourth PCA9685 servo pin
|
|
{30,24,RPIN_IN}, //4008 Node 30, Arduino pin D24
|
|
{30,25,RPIN_IN}, //4009 Node 30, Arduino pin D25
|
|
{30,26,RPIN_IN}, //4010 Node 30, Arduino pin D26
|
|
{30,27,RPIN_IN}, //4011 Node 30, Arduino pin D27
|
|
{30,1000,RPIN_OUT}, //4012 Node 30, DFPlayer playing flag (when read) / Song selector (when written)
|
|
{30,5000,RPIN_IN}, //4013 Node 30, VL53L0X detect pin
|
|
{30,VPIN_NONE,0}, //4014 Node 30, spare
|
|
{30,VPIN_NONE,0}, //4015 Node 30, spare
|
|
|
|
{31,164,RPIN_IN} , //4016 Node 31, first MCP23017 pin, input
|
|
{31,165,RPIN_IN}, //4017 Node 31, second MCP23017 pin, input
|
|
{31,166,RPIN_OUT}, //4018 Node 31, third MCP23017 pin, output
|
|
{31,166,RPIN_OUT}, //4019 Node 31, fourth MCP23017 pin, output
|
|
{31,100,RPIN_INOUT}, //4020 Node 31, first PCA9685 servo pin
|
|
{31,101,RPIN_INOUT}, //4021 Node 31, second PCA9685 servo pin
|
|
{31,102,RPIN_INOUT}, //4022 Node 31, third PCA9685 servo pin
|
|
{31,103,RPIN_INOUT}, //4023 Node 31, fourth PCA9685 servo pin
|
|
{31,24,RPIN_IN}, //4024 Node 31, Arduino pin D24
|
|
{31,25,RPIN_IN}, //4025 Node 31, Arduino pin D25
|
|
{31,26,RPIN_IN}, //4026 Node 31, Arduino pin D26
|
|
{31,27,RPIN_IN}, //4027 Node 31, Arduino pin D27
|
|
{31,3,RPIN_IN}, //4028 Node 31, Arduino pin D3
|
|
{31,VPIN_NONE,0}, //4029 Node 31, spare
|
|
{31,VPIN_NONE,0}, //4030 Node 31, spare
|
|
{31,VPIN_NONE,0} //4031 Node 31, spare
|
|
};
|
|
// FirstVPIN, nPins, thisNode, pinDefs, CEPin, CSNPin
|
|
// Net_RF24 *rf24Driver = new Net_RF24(48, 49);
|
|
// Network<Net_RF24>::create(4000, NUMREMOTEPINS(rpins), NODE, rpins, rf24Driver);
|
|
#if NODE==30
|
|
//Net_ENC28J60 *encDriver = new Net_ENC28J60(49);
|
|
//Network<Net_ENC28J60>::create(4000, NUMREMOTEPINS(rpins), NODE, rpins, encDriver);
|
|
#elif NODE==31
|
|
Net_ENC28J60 *encDriver = new Net_ENC28J60(53);
|
|
Network<Net_ENC28J60>::create(4000, NUMREMOTEPINS(rpins), NODE, rpins, encDriver);
|
|
#else
|
|
Net_Ethernet *etherDriver = new Net_Ethernet();
|
|
Network<Net_Ethernet>::create(4000, NUMREMOTEPINS(rpins), NODE, rpins, etherDriver);
|
|
#endif
|
|
for (int i=0; i<=32; i++)
|
|
Sensor::create(4000+i, 4000+i, 0);
|
|
#endif
|
|
|
|
#ifdef ARDUINO_ARCH_STM32
|
|
//PCF8574::create(1900, 8, 0x27);
|
|
Sensor::create(1900,100,1);
|
|
Sensor::create(1901,101,1);
|
|
#endif
|
|
|
|
}
|
|
#endif // IO_NO_HAL
|