81 lines
3.1 KiB
C
81 lines
3.1 KiB
C
/* This is an automation example file.
|
|
* The presence of a file called "myAutomation.h" brings EX-RAIL code into
|
|
* the command station.
|
|
* The automation may have multiple concurrent tasks.
|
|
* A task may
|
|
* - Act as a ROUTE setup macro for a user to drive over
|
|
* - drive a loco through an AUTOMATION
|
|
* - automate some cosmetic part of the layout without any loco.
|
|
*
|
|
* At startup, a single task is created to execute the startup sequence.
|
|
* This task may simply follow a route, or may START
|
|
* further tasks (that is.. send a loco out along a route).
|
|
*
|
|
* Where the loco id is not known at compile time, a new task
|
|
* can be created with the command:
|
|
* </ START [cab] route>
|
|
*
|
|
* A ROUTE, AUTOMATION or SEQUENCE are internally identical in ExRail terms
|
|
* but are just represented differently to a Withrottle user:
|
|
* ROUTE(n,"name") - as Route_n .. to setup a route through a layout
|
|
* AUTOMATION(n,"name") as Auto_n .. to send the current loco off along an automated journey
|
|
* SEQUENCE(n) is not visible to Withrottle.
|
|
*
|
|
*/
|
|
|
|
// This is the startup sequence,
|
|
AUTOSTART
|
|
POWERON // turn on track power
|
|
SENDLOCO(3,1) // send loco 3 off along route 1
|
|
SENDLOCO(10,2) // send loco 10 off along route 2
|
|
DONE // This just ends the startup thread, leaving 2 others running.
|
|
|
|
/* SEQUENCE(1) is a simple shuttle between 2 sensors
|
|
* S20 and S21 are sensors on arduino pins 20 and 21
|
|
* S20 S21
|
|
* === START->================
|
|
*/
|
|
SEQUENCE(1)
|
|
DELAY(10000) // wait 10 seconds
|
|
FON(3) // Set Loco Function 3, Horn on
|
|
DELAY(1000) // wait 1 second
|
|
FOFF(3) // Horn off
|
|
FWD(80) // Move forward at speed 80
|
|
AT(21) // until we hit sensor id 21
|
|
STOP // then stop
|
|
DELAY(5000) // Wait 5 seconds
|
|
FON(2) // ring bell
|
|
REV(60) // reverse at speed 60
|
|
AT(20) // until we get to S20
|
|
STOP // then stop
|
|
FOFF(2) // Bell off
|
|
FOLLOW(1) // and follow sequence 1 again
|
|
|
|
/* SEQUENCE(2) is an automation example for a single loco Y shaped journey
|
|
* S31,S32,S33 are sensors, T4 is a turnout
|
|
*
|
|
* S33 T4 S31
|
|
* ===-START->=============================================
|
|
* //
|
|
* S32 //
|
|
* ======================//
|
|
*
|
|
* Train runs from START to S31, back to S32, again to S31, Back to start.
|
|
*/
|
|
SEQUENCE(2)
|
|
FWD(60) // go forward at DCC speed 60
|
|
AT(31) STOP // when we get to sensor 31
|
|
DELAY(10000) // wait 10 seconds
|
|
THROW(4) // throw turnout for route to S32
|
|
REV(45) // go backwards at speed 45
|
|
AT(32) STOP // until we arrive at sensor 32
|
|
DELAY(5000) // wait 5 seconds
|
|
FWD(50) // go forwards at speed 50
|
|
AT(31) STOP // and stop at sensor 31
|
|
DELAY(5000) // wait 5 seconds
|
|
CLOSE(4) // set turnout closed
|
|
REV(50) // reverse back to S3
|
|
AT(33) STOP
|
|
DELAY(20000) // wait 20 seconds
|
|
FOLLOW(2) // follow sequence 2... ie repeat the process
|