mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2025-07-06 22:05:23 +02:00
In prep for Wifi siolution, all output functions changed to expect Print class instead of Stream... Can still pass Serial1 etc because Stream extends Print, but this allows for an output-only class extending Print to collect a response buffer for Wifi sending with AT commands.
34 lines
1.2 KiB
C
34 lines
1.2 KiB
C
#ifndef Config_h
|
|
#define Config_h
|
|
|
|
const int WIFI_PORT = 99; // OR set to zero for no wifi
|
|
const char WIFI_SSID[] = "BTHub5-M6PT"; // your network SSID (name)
|
|
const char WIFI_PASS[] = "49de8d4862"; // your network password
|
|
const long WIFI_BAUD_RATE=115200;
|
|
const long WIFI_CONNECT_RETRIES=10;
|
|
|
|
|
|
// This hardware configuration would normally be setup using a bunch of #ifdefs.
|
|
|
|
const byte MAIN_POWER_PIN = 3;
|
|
const byte MAIN_SIGNAL_PIN = 12;
|
|
const byte MAIN_SIGNAL_PIN_ALT = 0; // for hardware that flipflops signal pins
|
|
const byte MAIN_SENSE_PIN = A0;
|
|
const byte MAIN_SENSE_FACTOR=1; // analgRead(MAIN_SENSE_PIN) * MAIN_SENSE_FACTOR = milliamps
|
|
const byte MAIN_BRAKE_PIN = 9;
|
|
|
|
const byte PROG_POWER_PIN = 11;
|
|
const byte PROG_SIGNAL_PIN = 13;
|
|
const byte PROG_SIGNAL_PIN_ALT = 0; // for hardware that flipflops signal pins
|
|
const byte PROG_SENSE_PIN = A1;
|
|
const byte PROG_BRAKE_PIN = 10;
|
|
|
|
const float PROG_SENSE_FACTOR=1; // analgRead(PROG_SENSE_PIN) * PROG_SENSE_FACTOR = milliamps
|
|
|
|
// Allocations with memory implications.. however tiny!
|
|
// Base system takes approx 500 bytes + 4 per loco and 3 per turnout.
|
|
const byte MAX_LOCOS=50;
|
|
const byte MAX_TURNOUTS=50;
|
|
|
|
#endif
|