mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-23 21:01:25 +01:00
267 lines
8.6 KiB
C++
267 lines
8.6 KiB
C++
/*
|
|
* © 2021 Mike S
|
|
* © 2021 Fred Decker
|
|
* © 2020-2022 Harald Barth
|
|
* © 2020-2021 Chris Harlow
|
|
* All rights reserved.
|
|
*
|
|
* This file is part of CommandStation-EX
|
|
*
|
|
* This is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* It is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
#include <Arduino.h>
|
|
#include "MotorDriver.h"
|
|
#include "DCCTimer.h"
|
|
#include "DIAG.h"
|
|
|
|
#define setHIGH(fastpin) *fastpin.inout |= fastpin.maskHIGH
|
|
#define setLOW(fastpin) *fastpin.inout &= fastpin.maskLOW
|
|
#define isHIGH(fastpin) (*fastpin.inout & fastpin.maskHIGH)
|
|
#define isLOW(fastpin) (!isHIGH(fastpin))
|
|
|
|
bool MotorDriver::usePWM=false;
|
|
bool MotorDriver::commonFaultPin=false;
|
|
|
|
MotorDriver::MotorDriver(VPIN power_pin, byte signal_pin, byte signal_pin2, int8_t brake_pin,
|
|
byte current_pin, float sense_factor, unsigned int trip_milliamps, byte fault_pin) {
|
|
powerPin=power_pin;
|
|
IODevice::write(powerPin,LOW);// set to OUTPUT and off
|
|
|
|
signalPin=signal_pin;
|
|
getFastPin(F("SIG"),signalPin,fastSignalPin);
|
|
pinMode(signalPin, OUTPUT);
|
|
|
|
signalPin2=signal_pin2;
|
|
if (signalPin2!=UNUSED_PIN) {
|
|
dualSignal=true;
|
|
getFastPin(F("SIG2"),signalPin2,fastSignalPin2);
|
|
pinMode(signalPin2, OUTPUT);
|
|
}
|
|
else dualSignal=false;
|
|
|
|
brakePin=brake_pin;
|
|
if (brake_pin!=UNUSED_PIN){
|
|
invertBrake=brake_pin < 0;
|
|
brakePin=invertBrake ? 0-brake_pin : brake_pin;
|
|
getFastPin(F("BRAKE"),brakePin,fastBrakePin);
|
|
pinMode(brakePin, OUTPUT);
|
|
setBrake(true); // start with brake on in case we hace DC stuff going on
|
|
}
|
|
else brakePin=UNUSED_PIN;
|
|
|
|
currentPin=current_pin;
|
|
if (currentPin!=UNUSED_PIN) {
|
|
pinMode(currentPin, INPUT);
|
|
senseOffset=analogRead(currentPin); // value of sensor at zero current
|
|
}
|
|
|
|
faultPin=fault_pin;
|
|
if (faultPin != UNUSED_PIN) {
|
|
getFastPin(F("FAULT"),faultPin, 1 /*input*/, fastFaultPin);
|
|
pinMode(faultPin, INPUT);
|
|
}
|
|
|
|
senseFactor=sense_factor;
|
|
tripMilliamps=trip_milliamps;
|
|
rawCurrentTripValue=(int)(trip_milliamps / sense_factor);
|
|
|
|
if (currentPin==UNUSED_PIN)
|
|
DIAG(F("MotorDriver ** WARNING ** No current or short detection"));
|
|
else
|
|
DIAG(F("MotorDriver currentPin=A%d, senseOffset=%d, rawCurrentTripValue(relative to offset)=%d"),
|
|
currentPin-A0, senseOffset,rawCurrentTripValue);
|
|
|
|
// prepare values for current detection
|
|
sampleDelay = 0;
|
|
lastSampleTaken = millis();
|
|
progTripValue = mA2raw(TRIP_CURRENT_PROG);
|
|
|
|
}
|
|
|
|
bool MotorDriver::isPWMCapable() {
|
|
return (!dualSignal) && DCCTimer::isPWMPin(signalPin);
|
|
}
|
|
|
|
|
|
void MotorDriver::setPower(POWERMODE mode) {
|
|
bool on=mode==POWERMODE::ON;
|
|
if (on) {
|
|
IODevice::write(powerPin,HIGH);
|
|
}
|
|
else IODevice::write(powerPin,LOW);
|
|
powerMode=mode;
|
|
}
|
|
|
|
// setBrake applies brake if on == true. So to get
|
|
// voltage from the motor bride one needs to do a
|
|
// setBrake(false).
|
|
// If the brakePin is negative that means the sense
|
|
// of the brake pin on the motor bridge is inverted
|
|
// (HIGH == release brake) and setBrake does
|
|
// compensate for that.
|
|
//
|
|
void MotorDriver::setBrake(bool on) {
|
|
if (brakePin == UNUSED_PIN) return;
|
|
if (on ^ invertBrake) setHIGH(fastBrakePin);
|
|
else setLOW(fastBrakePin);
|
|
}
|
|
|
|
void MotorDriver::setSignal( bool high) {
|
|
if (usePWM) {
|
|
DCCTimer::setPWM(signalPin,high);
|
|
}
|
|
else {
|
|
if (high) {
|
|
setHIGH(fastSignalPin);
|
|
if (dualSignal) setLOW(fastSignalPin2);
|
|
}
|
|
else {
|
|
setLOW(fastSignalPin);
|
|
if (dualSignal) setHIGH(fastSignalPin2);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
bool MotorDriver::canMeasureCurrent() {
|
|
return currentPin!=UNUSED_PIN;
|
|
}
|
|
/*
|
|
* Return the current reading as pin reading 0 to 1023. If the fault
|
|
* pin is activated return a negative current to show active fault pin.
|
|
* As there is no -0, create a little and return -1 in that case.
|
|
*
|
|
* senseOffset handles the case where a shield returns values above or below
|
|
* a central value depending on direction.
|
|
*/
|
|
int MotorDriver::getCurrentRaw() {
|
|
if (currentPin==UNUSED_PIN) return 0;
|
|
int current;
|
|
// This function should NOT be called in an interruot so we
|
|
// dont need to fart about saving and restoring CPU specific
|
|
// interrupt registers.
|
|
noInterrupts();
|
|
current = analogRead(currentPin)-senseOffset;
|
|
interrupts();
|
|
if (current<0) current=0-current;
|
|
if ((faultPin != UNUSED_PIN) && isLOW(fastFaultPin) && powerMode==POWERMODE::ON)
|
|
return (current == 0 ? -1 : -current);
|
|
return current;
|
|
|
|
}
|
|
|
|
void MotorDriver::setDCSignal(byte speedcode) {
|
|
// spedcoode is a dcc speed /direction
|
|
byte tSpeed=speedcode & 0x7F;
|
|
// DCC Speed with 0,1 stop and speed steps 2 to 127
|
|
byte brake;
|
|
if (tSpeed <= 1) brake = 255;
|
|
else if (tSpeed >= 127) brake = 0;
|
|
else brake = 2 * (128-tSpeed);
|
|
analogWrite(brakePin,brake);
|
|
setSignal(speedcode & 0x80);
|
|
}
|
|
|
|
int MotorDriver::getCurrentRawInInterrupt() {
|
|
|
|
// IMPORTANT: This function must be called in Interrupt() time within the 56uS timer
|
|
// The default analogRead takes ~100uS which is catastrphic
|
|
// so DCCTimer has set the sample time to be much faster.
|
|
|
|
if (currentPin==UNUSED_PIN) return 0;
|
|
return analogRead(currentPin)-senseOffset;
|
|
}
|
|
|
|
unsigned int MotorDriver::raw2mA( int raw) {
|
|
return (unsigned int)(raw * senseFactor);
|
|
}
|
|
int MotorDriver::mA2raw( unsigned int mA) {
|
|
return (int)(mA / senseFactor);
|
|
}
|
|
|
|
void MotorDriver::getFastPin(const FSH* type,int pin, bool input, FASTPIN & result) {
|
|
// DIAG(F("MotorDriver %S Pin=%d,"),type,pin);
|
|
(void) type; // avoid compiler warning if diag not used above.
|
|
uint8_t port = digitalPinToPort(pin);
|
|
if (input)
|
|
result.inout = portInputRegister(port);
|
|
else
|
|
result.inout = portOutputRegister(port);
|
|
result.maskHIGH = digitalPinToBitMask(pin);
|
|
result.maskLOW = ~result.maskHIGH;
|
|
// DIAG(F(" port=0x%x, inoutpin=0x%x, isinput=%d, mask=0x%x"),port, result.inout,input,result.maskHIGH);
|
|
}
|
|
|
|
void MotorDriver::checkPowerOverload(bool useProgLimit, byte trackno) {
|
|
if (millis() - lastSampleTaken < sampleDelay) return;
|
|
lastSampleTaken = millis();
|
|
int tripValue= useProgLimit?progTripValue:getRawCurrentTripValue();
|
|
|
|
// Trackname for diag messages later
|
|
switch (powerMode) {
|
|
case POWERMODE::OFF:
|
|
sampleDelay = POWER_SAMPLE_OFF_WAIT;
|
|
break;
|
|
case POWERMODE::ON:
|
|
// Check current
|
|
lastCurrent=getCurrentRaw();
|
|
if (lastCurrent < 0) {
|
|
// We have a fault pin condition to take care of
|
|
lastCurrent = -lastCurrent;
|
|
setPower(POWERMODE::OVERLOAD); // Turn off, decide later how fast to turn on again
|
|
if (commonFaultPin) {
|
|
if (lastCurrent <= tripValue) {
|
|
setPower(POWERMODE::ON); // maybe other track
|
|
}
|
|
// Write this after the fact as we want to turn on as fast as possible
|
|
// because we don't know which output actually triggered the fault pin
|
|
DIAG(F("COMMON FAULT PIN ACTIVE - TOGGLED POWER on %d"), trackno);
|
|
} else {
|
|
DIAG(F("TRACK %d FAULT PIN ACTIVE - OVERLOAD"), trackno);
|
|
if (lastCurrent < tripValue) {
|
|
lastCurrent = tripValue; // exaggerate
|
|
}
|
|
}
|
|
}
|
|
if (lastCurrent < tripValue) {
|
|
sampleDelay = POWER_SAMPLE_ON_WAIT;
|
|
if(power_good_counter<100)
|
|
power_good_counter++;
|
|
else
|
|
if (power_sample_overload_wait>POWER_SAMPLE_OVERLOAD_WAIT) power_sample_overload_wait=POWER_SAMPLE_OVERLOAD_WAIT;
|
|
} else {
|
|
setPower(POWERMODE::OVERLOAD);
|
|
unsigned int mA=raw2mA(lastCurrent);
|
|
unsigned int maxmA=raw2mA(tripValue);
|
|
power_good_counter=0;
|
|
sampleDelay = power_sample_overload_wait;
|
|
DIAG(F("TRACK %d POWER OVERLOAD current=%d max=%d offtime=%d"), trackno, mA, maxmA, sampleDelay);
|
|
if (power_sample_overload_wait >= 10000)
|
|
power_sample_overload_wait = 10000;
|
|
else
|
|
power_sample_overload_wait *= 2;
|
|
}
|
|
break;
|
|
case POWERMODE::OVERLOAD:
|
|
// Try setting it back on after the OVERLOAD_WAIT
|
|
setPower(POWERMODE::ON);
|
|
sampleDelay = POWER_SAMPLE_ON_WAIT;
|
|
// Debug code....
|
|
DIAG(F("TRACK %d POWER RESET delay=%d"), trackno, sampleDelay);
|
|
break;
|
|
default:
|
|
sampleDelay = 999; // cant get here..meaningless statement to avoid compiler warning.
|
|
}
|
|
}
|