mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-25 21:41:23 +01:00
396b5c8299
Merge SSD1306AsciiWire.cpp into SSD1306Ascii.cpp and rename SSD1306AsciiWire.h as SSD1306Ascii.h. Merge allFonts.h into System5x7.h and rename as SSD1306font.h. Move all SSD1306 files into root folder to facilitate compilation in Arduino IDE.
265 lines
11 KiB
C
265 lines
11 KiB
C
/* Based on Arduino SSD1306Ascii Library, Copyright (C) 2015 by William Greiman
|
|
* Modifications (C) 2021 Neil McKechnie
|
|
*
|
|
* This Library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This Library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with the Arduino SSD1306Ascii Library. If not, see
|
|
* <http://www.gnu.org/licenses/>.
|
|
*/
|
|
/**
|
|
* @file SSD1306init.h
|
|
* @brief Display controller initialization commands.
|
|
*/
|
|
#ifndef SSD1306init_h
|
|
#define SSD1306init_h
|
|
//------------------------------------------------------------------------------
|
|
#ifndef __AVR__
|
|
/** Handle AVR flash addressing. */
|
|
#define MEM_TYPE
|
|
#else // __AVR__
|
|
#define MEM_TYPE __attribute__ ((progmem))
|
|
#endif // __AVR__
|
|
//------------------------------------------------------------------------------
|
|
/** Set Lower Column Start Address for Page Addressing Mode. */
|
|
#define SSD1306_SETLOWCOLUMN 0x00
|
|
/** Set Higher Column Start Address for Page Addressing Mode. */
|
|
#define SSD1306_SETHIGHCOLUMN 0x10
|
|
/** Set Memory Addressing Mode. */
|
|
#define SSD1306_MEMORYMODE 0x20
|
|
/** Set display RAM display start line register from 0 - 63. */
|
|
#define SSD1306_SETSTARTLINE 0x40
|
|
/** Set Display Contrast to one of 256 steps. */
|
|
#define SSD1306_SETCONTRAST 0x81
|
|
/** Enable or disable charge pump. Follow with 0X14 enable, 0X10 disable. */
|
|
#define SSD1306_CHARGEPUMP 0x8D
|
|
/** Set Segment Re-map between data column and the segment driver. */
|
|
#define SSD1306_SEGREMAP 0xA0
|
|
/** Resume display from GRAM content. */
|
|
#define SSD1306_DISPLAYALLON_RESUME 0xA4
|
|
/** Force display on regardless of GRAM content. */
|
|
#define SSD1306_DISPLAYALLON 0xA5
|
|
/** Set Normal Display. */
|
|
#define SSD1306_NORMALDISPLAY 0xA6
|
|
/** Set Inverse Display. */
|
|
#define SSD1306_INVERTDISPLAY 0xA7
|
|
/** Set Multiplex Ratio from 16 to 63. */
|
|
#define SSD1306_SETMULTIPLEX 0xA8
|
|
/** Set Display off. */
|
|
#define SSD1306_DISPLAYOFF 0xAE
|
|
/** Set Display on. */
|
|
#define SSD1306_DISPLAYON 0xAF
|
|
/**Set GDDRAM Page Start Address. */
|
|
#define SSD1306_SETSTARTPAGE 0XB0
|
|
/** Set COM output scan direction normal. */
|
|
#define SSD1306_COMSCANINC 0xC0
|
|
/** Set COM output scan direction reversed. */
|
|
#define SSD1306_COMSCANDEC 0xC8
|
|
/** Set Display Offset. */
|
|
#define SSD1306_SETDISPLAYOFFSET 0xD3
|
|
/** Sets COM signals pin configuration to match the OLED panel layout. */
|
|
#define SSD1306_SETCOMPINS 0xDA
|
|
/** This command adjusts the VCOMH regulator output. */
|
|
#define SSD1306_SETVCOMDETECT 0xDB
|
|
/** Set Display Clock Divide Ratio/ Oscillator Frequency. */
|
|
#define SSD1306_SETDISPLAYCLOCKDIV 0xD5
|
|
/** Set Pre-charge Period */
|
|
#define SSD1306_SETPRECHARGE 0xD9
|
|
/** Deactivate scroll */
|
|
#define SSD1306_DEACTIVATE_SCROLL 0x2E
|
|
/** No Operation Command. */
|
|
#define SSD1306_NOP 0XE3
|
|
//------------------------------------------------------------------------------
|
|
/** Set Pump voltage value: (30H~33H) 6.4, 7.4, 8.0 (POR), 9.0. */
|
|
#define SH1106_SET_PUMP_VOLTAGE 0X30
|
|
/** First byte of set charge pump mode */
|
|
#define SH1106_SET_PUMP_MODE 0XAD
|
|
/** Second byte charge pump on. */
|
|
#define SH1106_PUMP_ON 0X8B
|
|
/** Second byte charge pump off. */
|
|
#define SH1106_PUMP_OFF 0X8A
|
|
//------------------------------------------------------------------------------
|
|
/**
|
|
* @struct DevType
|
|
* @brief Device initialization structure.
|
|
*/
|
|
struct DevType {
|
|
/**
|
|
* Pointer to initialization command bytes.
|
|
*/
|
|
const uint8_t* initcmds;
|
|
/**
|
|
* Number of initialization bytes.
|
|
*/
|
|
const uint8_t initSize;
|
|
/**
|
|
* Width of the diaplay in pixels.
|
|
*/
|
|
const uint8_t lcdWidth;
|
|
/**
|
|
* Height of the display in pixels.
|
|
*/
|
|
const uint8_t lcdHeight;
|
|
/**
|
|
* Column offset RAM to display. Used to pick start column of SH1106.
|
|
*/
|
|
const uint8_t colOffset;
|
|
};
|
|
//------------------------------------------------------------------------------
|
|
/** Initialization commands for a 64x48 Micro OLED display (by r7) */
|
|
static const uint8_t MEM_TYPE MicroOLED64x48init[] = {
|
|
// Init sequence for 64x48 Micro OLED module
|
|
SSD1306_DISPLAYOFF,
|
|
SSD1306_SETDISPLAYCLOCKDIV, 0x80, // the suggested ratio 0x80
|
|
SSD1306_SETMULTIPLEX, 0x2F, //
|
|
SSD1306_SETDISPLAYOFFSET, 0x0, // no offset
|
|
SSD1306_SETSTARTLINE | 0x0, // line #0
|
|
SSD1306_CHARGEPUMP, 0x14, // internal vcc
|
|
SSD1306_NORMALDISPLAY,
|
|
SSD1306_DISPLAYALLON_RESUME,
|
|
SSD1306_SEGREMAP | 0x1, // column 127 mapped to SEG0
|
|
SSD1306_COMSCANDEC, // column scan direction reversed
|
|
SSD1306_SETCOMPINS, 0x12, // 0x12 if height > 32 else 0x02
|
|
SSD1306_SETCONTRAST, 0x7F, // contrast level 127
|
|
SSD1306_SETPRECHARGE, 0xF1, // pre-charge period (1, 15)
|
|
SSD1306_SETVCOMDETECT, 0x40, // vcomh regulator level
|
|
SSD1306_DISPLAYON
|
|
};
|
|
/** Initialize a 64x48 Micro OLED display. */
|
|
static const DevType MEM_TYPE MicroOLED64x48 = {
|
|
MicroOLED64x48init,
|
|
sizeof(MicroOLED64x48init),
|
|
64,
|
|
48,
|
|
32
|
|
};
|
|
//------------------------------------------------------------------------------
|
|
// this section is based on
|
|
// https://github.com/olikraus/u8g2/blob/master/csrc/u8x8_d_ssd1306_96x16.c
|
|
/** Initialization commands for a 96x16 SSD1306 oled display. */
|
|
static const uint8_t MEM_TYPE SSD1306_96x16init[] = {
|
|
// Init sequence for Generic 96x16 OLED module
|
|
SSD1306_DISPLAYOFF,
|
|
SSD1306_SETDISPLAYCLOCKDIV, 0x80, // clock divide ratio and osc frequency
|
|
SSD1306_SETMULTIPLEX, 0x0F, // multiplex ratio
|
|
SSD1306_SETDISPLAYOFFSET, 0x0, // display offset zero
|
|
SSD1306_SETSTARTLINE | 0x0, // set display start line to 0
|
|
SSD1306_CHARGEPUMP, 0x14, // charge pump setting enable
|
|
SSD1306_MEMORYMODE, 0x00, // page addressing mode
|
|
SSD1306_SEGREMAP | 0xA1, // segment remap
|
|
SSD1306_COMSCANDEC, // scan dir reverse
|
|
SSD1306_SETCOMPINS, 0x02, // com pin HW config
|
|
SSD1306_SETCONTRAST, 0xAF, // set contrast level 0xaf
|
|
SSD1306_SETPRECHARGE, 0xF1, // pre-charge period 0x0f1
|
|
SSD1306_SETVCOMDETECT, 0x20, // vcomh deselect level
|
|
SSD1306_DEACTIVATE_SCROLL, // Deactivate scroll
|
|
SSD1306_DISPLAYALLON_RESUME,
|
|
SSD1306_NORMALDISPLAY,
|
|
SSD1306_DISPLAYON
|
|
};
|
|
/** Initialize a 96x16 SSD1306 oled display. */
|
|
static const DevType MEM_TYPE SSD1306_96x16 = {
|
|
SSD1306_96x16init,
|
|
sizeof(SSD1306_96x16init),
|
|
96,
|
|
16,
|
|
0
|
|
};
|
|
//------------------------------------------------------------------------------
|
|
// this section is based on https://github.com/adafruit/Adafruit_SSD1306
|
|
/** Initialization commands for a 128x32 SSD1306 oled display. */
|
|
static const uint8_t MEM_TYPE Adafruit128x32init[] = {
|
|
// Init sequence for Adafruit 128x32 OLED module
|
|
SSD1306_DISPLAYOFF,
|
|
SSD1306_SETDISPLAYCLOCKDIV, 0x80, // the suggested ratio 0x80
|
|
SSD1306_SETMULTIPLEX, 0x1F, // ratio 32
|
|
SSD1306_SETDISPLAYOFFSET, 0x0, // no offset
|
|
SSD1306_SETSTARTLINE | 0x0, // line #0
|
|
SSD1306_CHARGEPUMP, 0x14, // internal vcc
|
|
SSD1306_MEMORYMODE, 0x02, // page mode
|
|
SSD1306_SEGREMAP | 0x1, // column 127 mapped to SEG0
|
|
SSD1306_COMSCANDEC, // column scan direction reversed
|
|
SSD1306_SETCOMPINS, 0x02, // sequential COM pins, disable remap
|
|
SSD1306_SETCONTRAST, 0x7F, // contrast level 127
|
|
SSD1306_SETPRECHARGE, 0xF1, // pre-charge period (1, 15)
|
|
SSD1306_SETVCOMDETECT, 0x40, // vcomh regulator level
|
|
SSD1306_DISPLAYALLON_RESUME,
|
|
SSD1306_NORMALDISPLAY,
|
|
SSD1306_DISPLAYON
|
|
};
|
|
/** Initialize a 128x32 SSD1306 oled display. */
|
|
static const DevType MEM_TYPE Adafruit128x32 = {
|
|
Adafruit128x32init,
|
|
sizeof(Adafruit128x32init),
|
|
128,
|
|
32,
|
|
0
|
|
};
|
|
//------------------------------------------------------------------------------
|
|
// This section is based on https://github.com/adafruit/Adafruit_SSD1306
|
|
/** Initialization commands for a 128x64 SSD1306 oled display. */
|
|
static const uint8_t MEM_TYPE Adafruit128x64init[] = {
|
|
// Init sequence for Adafruit 128x64 OLED module
|
|
SSD1306_DISPLAYOFF,
|
|
SSD1306_SETDISPLAYCLOCKDIV, 0x80, // the suggested ratio 0x80
|
|
SSD1306_SETMULTIPLEX, 0x3F, // ratio 64
|
|
SSD1306_SETDISPLAYOFFSET, 0x0, // no offset
|
|
SSD1306_SETSTARTLINE | 0x0, // line #0
|
|
SSD1306_CHARGEPUMP, 0x14, // internal vcc
|
|
SSD1306_MEMORYMODE, 0x02, // page mode
|
|
SSD1306_SEGREMAP | 0x1, // column 127 mapped to SEG0
|
|
SSD1306_COMSCANDEC, // column scan direction reversed
|
|
SSD1306_SETCOMPINS, 0x12, // alt COM pins, disable remap
|
|
SSD1306_SETCONTRAST, 0x7F, // contrast level 127
|
|
SSD1306_SETPRECHARGE, 0xF1, // pre-charge period (1, 15)
|
|
SSD1306_SETVCOMDETECT, 0x40, // vcomh regulator level
|
|
SSD1306_DISPLAYALLON_RESUME,
|
|
SSD1306_NORMALDISPLAY,
|
|
SSD1306_DISPLAYON
|
|
};
|
|
/** Initialize a 128x64 oled display. */
|
|
static const DevType MEM_TYPE Adafruit128x64 = {
|
|
Adafruit128x64init,
|
|
sizeof(Adafruit128x64init),
|
|
128,
|
|
64,
|
|
0
|
|
};
|
|
//------------------------------------------------------------------------------
|
|
// This section is based on https://github.com/stanleyhuangyc/MultiLCD
|
|
/** Initialization commands for a 128x64 SH1106 oled display. */
|
|
static const uint8_t MEM_TYPE SH1106_128x64init[] = {
|
|
SSD1306_DISPLAYOFF,
|
|
SSD1306_SETSTARTPAGE | 0X0, // set page address
|
|
SSD1306_SETCONTRAST, 0x80, // 128
|
|
SSD1306_SEGREMAP | 0X1, // set segment remap
|
|
SSD1306_NORMALDISPLAY, // normal / reverse
|
|
SSD1306_SETMULTIPLEX, 0x3F, // ratio 64
|
|
SH1106_SET_PUMP_MODE, SH1106_PUMP_ON, // set charge pump enable
|
|
SH1106_SET_PUMP_VOLTAGE | 0X2, // 8.0 volts
|
|
SSD1306_COMSCANDEC, // Com scan direction
|
|
SSD1306_SETDISPLAYOFFSET, 0X00, // set display offset
|
|
SSD1306_SETDISPLAYCLOCKDIV, 0X80, // set osc division
|
|
SSD1306_SETPRECHARGE, 0X1F, // set pre-charge period
|
|
SSD1306_SETCOMPINS, 0X12, // set COM pins
|
|
SSD1306_SETVCOMDETECT, 0x40, // set vcomh
|
|
SSD1306_DISPLAYON
|
|
};
|
|
/** Initialize a 128x64 oled SH1106 display. */
|
|
static const DevType MEM_TYPE SH1106_128x64 = {
|
|
SH1106_128x64init,
|
|
sizeof(SH1106_128x64init),
|
|
128,
|
|
64,
|
|
2 // SH1106 is a 132x64 controller. Use middle 128 columns.
|
|
};
|
|
#endif // SSD1306init_h
|