dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2025-04-21 12:31:19 +02:00
Code Releases Activity
CommandStation-EX/IO_RSproto.h
travis-farmer 3b2ea6f337
does not compile, saving current
2024-12-13 16:46:17 -05:00

640 lines
23 KiB
C++
Raw Blame History

/*
* © 2024, Travis Farmer. All rights reserved.
* © 2024, Chris Bulliner. All rights reserved. https://github.com/CMB27
*
* This file is part of DCC++EX API
*
* This is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* It is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*/
/*
* RSproto
* =======
* To define a RSproto, example syntax:
* RSproto::create(serial, baud[, cycletime[, pin]]);
*
* serial = serial port to be used (e.g. Serial3)
* baud = baud rate (9600, 19200, 28800, 57600 or 115200)
* cycletime = minimum time between successive updates/reads of a node in millisecs (default 500ms)
* pin = pin number connected to RSproto module's DE and !RE terminals for half-duplex operation (default VPIN_NONE)
*
*
* RSprotoNode
* ========
* To define a RSproto node and associate it with a RSproto bus,
* RSprotonode::create(firstVPIN, numVPINs, nodeID);
*
* firstVPIN = first vpin in block allocated to this device
* numVPINs = number of vpins
* nodeID = 0-254
*/
#ifndef IO_RS485_H
#define IO_RS485_H
#include "IODevice.h"
/**********************************************************************
* RSprotonode class
*
* This encapsulates the state associated with a single RSproto node,
* which includes the nodeID, number of discrete inputs and coils, and
* the states of the discrete inputs and coils.
**********************************************************************/
class RSprotonode : public IODevice {
private:
uint8_t _busNo;
uint8_t _nodeID;
char _type;
RSprotonode *_next = NULL;
bool _initialised = false;
RSproto* bus = NULL;
// EX-IOExpander protocol flags
enum {
EXIOINIT = 0xE0, // Flag to initialise setup procedure
EXIORDY = 0xE1, // Flag we have completed setup procedure, also for EX-IO to ACK setup
EXIODPUP = 0xE2, // Flag we're sending digital pin pullup configuration
EXIOVER = 0xE3, // Flag to get version
EXIORDAN = 0xE4, // Flag to read an analogue input
EXIOWRD = 0xE5, // Flag for digital write
EXIORDD = 0xE6, // Flag to read digital input
EXIOENAN = 0xE7, // Flag to enable an analogue pin
EXIOINITA = 0xE8, // Flag we're receiving analogue pin mappings
EXIOPINS = 0xE9, // Flag we're receiving pin counts for buffers
EXIOWRAN = 0xEA, // Flag we're sending an analogue write (PWM)
EXIOERR = 0xEF, // Flag we've received an error
};
public:
enum ProfileType : int {
Instant = 0, // Moves immediately between positions (if duration not specified)
UseDuration = 0, // Use specified duration
Fast = 1, // Takes around 500ms end-to-end
Medium = 2, // 1 second end-to-end
Slow = 3, // 2 seconds end-to-end
Bounce = 4, // For semaphores/turnouts with a bit of bounce!!
NoPowerOff = 0x80, // Flag to be ORed in to suppress power off after move.
};
uint8_t _numDigitalPins = 0;
uint8_t _numAnaloguePins = 0;
uint8_t _majorVer = 0;
uint8_t _minorVer = 0;
uint8_t _patchVer = 0;
uint8_t* _digitalInputStates = NULL;
uint8_t* _analogueInputStates = NULL;
uint8_t* _analogueInputBuffer = NULL; // buffer for I2C input transfers
uint8_t _readCommandBuffer[4];
uint8_t _digitalPinBytes = 0; // Size of allocated memory buffer (may be longer than needed)
uint8_t _analoguePinBytes = 0; // Size of allocated memory buffer (may be longer than needed)
uint8_t* _analoguePinMap = NULL;
static void create(VPIN firstVpin, int nPins, uint8_t nodeID) {
if (checkNoOverlap(firstVpin, nPins)) new RSprotonode(firstVpin, nPins, nodeID);
}
RSprotonode(VPIN firstVpin, int nPins, uint8_t nodeID);
uint8_t getNodeID() {
return _nodeID;
}
RSprotonode *getNext() {
return _next;
}
void setNext(RSprotonode *node) {
_next = node;
}
bool isInitialised() {
return _initialised;
}
void setInitialised() {
_initialised = true;
}
bool _configure(VPIN vpin, ConfigTypeEnum configType, int paramCount, int params[]) override {
if (paramCount != 1) return false;
int pin = vpin - _firstVpin;
uint16_t pullup = params[0];
uint8_t outBuffer[6] = {EXIODPUP, _nodeID, pin, pullup};
uint8_t responseBuffer[3];
bus->_busy = true;
bus->updateCrc(outBuffer,4);
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, HIGH);
bus->_serialD->write(outBuffer, 6);
bus->_serialD->flush();
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, LOW);
unsigned long startMillis = millis();
while (!bus->_serialD->available()) {
if (millis() - startMillis > 500) return false;
}
uint16_t len = 0;
unsigned long startMicros = micros();
do {
if (bus->_serialD->available()) {
startMicros = micros();
responseBuffer[len] = bus->_serialD->read();
len++;
}
} while (micros() - startMicros <= 500 && len < 256);
bus->_busy = false;
if (bus->crcGood(responseBuffer,sizeof(responseBuffer)-2)) {
if (!testAndStripMasterFlag(responseBuffer)) DIAG(F("Foreign RSproto Device! no master flag from node %d"),_nodeID);
if (responseBuffer[0] == EXIORDY) {
} else {
DIAG(F("EX-IOExpander485 Vpin %u cannot be used as a digital input pin"), pin);
}
} else {
DIAG(F("EX-IOExpander485 node %d CRC Error"), _nodeID);
}
}
int _configureAnalogIn(VPIN vpin) override {
int pin = vpin - _firstVpin;
//RSproto *mainrs = RSproto::findBus(_busNo);
uint8_t commandBuffer[5] = {EXIOENAN, (uint8_t) _nodeID, (uint8_t) pin};
uint8_t responseBuffer[3];
bus->_busy = true;
bus->updateCrc(commandBuffer,3);
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, HIGH);
bus->_serialD->write(commandBuffer, 5);
bus->_serialD->flush();
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, LOW);
unsigned long startMillis = millis();
while (!bus->_serialD->available()) {
if (millis() - startMillis > 500) return 0;
}
uint16_t len = 0;
unsigned long startMicros = micros();
do {
if (bus->_serialD->available()) {
startMicros = micros();
responseBuffer[len] = bus->_serialD->read();
len++;
}
} while (micros() - startMicros <= 500 && len < 256);
bus->_busy = false;
if (bus->crcGood(responseBuffer,sizeof(responseBuffer)-2)) {
if (!bus->testAndStripMasterFlag(responseBuffer)) DIAG(F("Foreign RSproto Device! no master flag from node %d"),_nodeID);
if (responseBuffer[0] != EXIORDY) {
DIAG(F("EX-IOExpander485: Vpin %u on node %d cannot be used as an analogue input pin"), (int) pin, (int) _nodeID);
}
} else {
DIAG(F("EX-IOExpander485 node %d CRC Error"), (int) _nodeID);
}
return false;
}
void _begin() override {
if (bus->_txPin != VPIN_NONE) {
pinMode(bus->_txPin, OUTPUT);
ArduinoPins::fastWriteDigital(bus->_txPin, LOW);
}
uint8_t receiveBuffer[5];
uint8_t commandBuffer[7] = {EXIOINIT, _nodeID, (uint8_t)_nPins, (uint8_t)(_firstVpin & 0xFF), (uint8_t)(_firstVpin >> 8)};
bus->updateCrc(commandBuffer,5);
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, HIGH);
bus->_serialD->write(commandBuffer, 7);
bus->_serialD->flush();
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, LOW);
unsigned long startMillis = millis();
while (!bus->_serialD->available()) {
if (millis() - startMillis >= 500) return;
}
uint16_t len = 0;
unsigned long startMicros = micros();
do {
if (bus->_serialD->available()) {
startMicros = micros();
receiveBuffer[len] = bus->_serialD->read();
len++;
}
} while (micros() - startMicros <= 500 && len < 256);
if (receiveBuffer[1] == EXIOPINS && bus->crcGood(receiveBuffer,sizeof(receiveBuffer)-2)) {
if (!bus->testAndStripMasterFlag(receiveBuffer)) DIAG(F("Foreign RSproto Device! no master flag from node %d"),_nodeID);
_numDigitalPins = receiveBuffer[1];
_numAnaloguePins = receiveBuffer[2];
// See if we already have suitable buffers assigned
if (_numDigitalPins>0) {
size_t digitalBytesNeeded = (_numDigitalPins + 7) / 8;
if (_digitalPinBytes < digitalBytesNeeded) {
// Not enough space, free any existing buffer and allocate a new one
if (_digitalPinBytes > 0) free(_digitalInputStates);
if ((_digitalInputStates = (byte*) calloc(digitalBytesNeeded, 1)) != NULL) {
_digitalPinBytes = digitalBytesNeeded;
} else {
DIAG(F("EX-IOExpander485 node:%d ERROR alloc %d bytes"), _nodeID, digitalBytesNeeded);
_deviceState = DEVSTATE_FAILED;
_digitalPinBytes = 0;
return;
}
}
}
if (_numAnaloguePins>0) {
size_t analogueBytesNeeded = _numAnaloguePins * 2;
if (_analoguePinBytes < analogueBytesNeeded) {
// Free any existing buffers and allocate new ones.
if (_analoguePinBytes > 0) {
free(_analogueInputBuffer);
free(_analogueInputStates);
free(_analoguePinMap);
}
_analogueInputStates = (uint8_t*) calloc(analogueBytesNeeded, 1);
_analogueInputBuffer = (uint8_t*) calloc(analogueBytesNeeded, 1);
_analoguePinMap = (uint8_t*) calloc(_numAnaloguePins, 1);
if (_analogueInputStates != NULL &&
_analogueInputBuffer != NULL &&
_analoguePinMap != NULL) {
_analoguePinBytes = analogueBytesNeeded;
} else {
DIAG(F("EX-IOExpander485 node:%d ERROR alloc analog pin bytes"), _nodeID);
_deviceState = DEVSTATE_FAILED;
_analoguePinBytes = 0;
return;
}
}
}
} else {
DIAG(F("EX-IOExpander485 node:%d ERROR configuring device (CRC: %s)"), _nodeID, bus->crcGood(receiveBuffer,sizeof(receiveBuffer)-2)? "PASS":"FAIL");
_deviceState = DEVSTATE_FAILED;
return;
}
commandBuffer[0] = EXIOINITA;
commandBuffer[1] = _nodeID;
bus->updateCrc(commandBuffer,2);
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, HIGH);
bus->_serialD->write(commandBuffer, 4);
bus->_serialD->flush();
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, LOW);
startMillis = millis();
while (!bus->_serialD->available()) {
if (millis() - startMillis >= 500) return;
}
len = 0;
startMicros = micros();
do {
if (bus->_serialD->available()) {
startMicros = micros();
receiveBuffer[len] = bus->_serialD->read();
len++;
}
} while (micros() - startMicros <= 500 && len < 256);
if (bus->crcGood(receiveBuffer,sizeof(receiveBuffer)-2)) {
if (!bus->testAndStripMasterFlag(receiveBuffer)) DIAG(F("Foreign RSproto Device! no master flag from node %d"),_nodeID);
for (int i = 0; i < _numAnaloguePins; i++) {
_analoguePinMap[i] = receiveBuffer[i];
}
}
uint8_t versionBuffer[5];
commandBuffer[0] = EXIOVER;
commandBuffer[1] = _nodeID;
bus->updateCrc(commandBuffer,2);
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, HIGH);
bus->_serialD->write(commandBuffer, 4);
bus->_serialD->flush();
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, LOW);
startMillis = millis();
while (!bus->_serialD->available()) {
if (millis() - startMillis >= 500) return;
}
len = 0;
startMicros = micros();
do {
if (bus->_serialD->available()) {
startMicros = micros();
versionBuffer[len] = bus->_serialD->read();
len++;
}
} while (micros() - startMicros <= 500 && len < 256);
if (bus->crcGood(versionBuffer,sizeof(versionBuffer)-2)) {
if (!bus->testAndStripMasterFlag(versionBuffer)) DIAG(F("Foreign RSproto Device! no master flag from node %d"),_nodeID);
_majorVer = versionBuffer[0];
_minorVer = versionBuffer[1];
_patchVer = versionBuffer[2];
DIAG(F("EX-IOExpander485 device found, node:%d, Version v%d.%d.%d"), _nodeID, _majorVer, _minorVer, _patchVer);
}
#ifdef DIAG_IO
_display();
#endif
_initialised = false;
}
int _read(VPIN vpin) override {
if (_deviceState == DEVSTATE_FAILED) return 0;
int pin = vpin - _firstVpin;
uint8_t pinByte = pin / 8;
bool value = bitRead(_digitalInputStates[pinByte], pin - pinByte * 8);
return value;
}
void _write(VPIN vpin, int value) override {
if (_deviceState == DEVSTATE_FAILED) return;
int pin = vpin - _firstVpin;
uint8_t digitalOutBuffer[6];
uint8_t responseBuffer[3];
digitalOutBuffer[0] = EXIOWRD;
digitalOutBuffer[1] = (uint8_t) _nodeID;
digitalOutBuffer[2] = (uint8_t) pin;
digitalOutBuffer[3] = (uint8_t) value;
bus->_busy = true;
bus->updateCrc(digitalOutBuffer,4);
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, HIGH);
bus->_serialD->write(digitalOutBuffer, 6);
bus->_serialD->flush();
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, LOW);
unsigned long startMillis = millis();
while (!bus->_serialD->available()) {
if (millis() - startMillis >= 500) return;
}
uint16_t len = 0;
unsigned long startMicros = micros();
do {
if (bus->_serialD->available()) {
startMicros = micros();
responseBuffer[len] = bus->_serialD->read();
len++;
}
} while (micros() - startMicros <= 500 && len < 256);
bus->_busy = false;
if (bus->crcGood(responseBuffer,sizeof(responseBuffer)-2)) {
if (!testAndStripMasterFlag(responseBuffer)) DIAG(F("Foreign RSproto Device! no master flag from node %d"),_nodeID);
if (responseBuffer[0] != EXIORDY) {
DIAG(F("EX-IOExpander485 Vpin %u cannot be used as a digital output pin"), pin);
}
} else {
DIAG(F("EX-IOExpander485 node %d CRC Error"), _nodeID);
}
}
bool testAndStripMasterFlag(uint8_t *buf) {
if (buf[0] != 0xFF) return false; // why did we not get a master flag? bad node?
for (int i = 0; i < sizeof(buf)-1; i++) buf[i] = buf[i+1]; // shift array to begining
return true;
}
int _readAnalogue(VPIN vpin) override {
if (_deviceState == DEVSTATE_FAILED) return 0;
int pin = vpin - _firstVpin;
for (uint8_t aPin = 0; aPin < _numAnaloguePins; aPin++) {
if (_analoguePinMap[aPin] == pin) {
uint8_t _pinLSBByte = aPin * 2;
uint8_t _pinMSBByte = _pinLSBByte + 1;
return (_analogueInputStates[_pinMSBByte] << 8) + _analogueInputStates[_pinLSBByte];
}
}
return -1; // pin not found in table
}
void _writeAnalogue(VPIN vpin, int value, uint8_t profile, uint16_t duration) override {
uint8_t servoBuffer[7];
uint8_t responseBuffer[1];
if (_deviceState == DEVSTATE_FAILED) return;
int pin = vpin - _firstVpin;
servoBuffer[0] = EXIOWRAN;
servoBuffer[1] = (uint8_t) _nodeID;
servoBuffer[2] = (uint8_t) pin;
servoBuffer[3] = (uint8_t) value & 0xFF;
servoBuffer[4] = (uint8_t) value >> 8;
servoBuffer[5] = (uint8_t) profile;
servoBuffer[6] = (uint8_t) duration & 0xFF;
servoBuffer[7] = (uint8_t) duration >> 8;
bus->_busy = true;
bus->updateCrc(servoBuffer,8);
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, HIGH);
bus->_serialD->write(servoBuffer, 10);
bus->_serialD->flush();
if (bus->_txPin != VPIN_NONE) ArduinoPins::fastWriteDigital(bus->_txPin, LOW);
unsigned long startMillis = millis();
while (!bus->_serialD->available()) {
if (millis() - startMillis >= 500) return;
}
uint16_t len = 0;
unsigned long startMicros = micros();
do {
if (bus->_serialD->available()) {
startMicros = micros();
responseBuffer[len] = bus->_serialD->read();
len++;
}
} while (micros() - startMicros <= 500 && len < 256);
bus->_busy = false;
if (!bus->crcGood(responseBuffer,sizeof(responseBuffer)-2)) {
DIAG(F("EX-IOExpander485 node %d CRC Error"), (int) _nodeID);
//_deviceState = DEVSTATE_FAILED;
} else {
if (!bus->testAndStripMasterFlag(responseBuffer)) DIAG(F("Foreign RSproto Device! no master flag from node %d"),_nodeID);
if (responseBuffer[0] != EXIORDY) {
DIAG(F("EX-IOExpander485 Vpin %u cannot be used as a servo/PWM pin"), pin);
}
}
}
uint8_t getBusNumber() {
return _busNo;
}
void _display() override {
DIAG(F("EX-IOExpander485 node:%d v%d.%d.%d Vpins %u-%u %S"), _nodeID, _majorVer, _minorVer, _patchVer, (int)_firstVpin, (int)_firstVpin+_nPins-1, _deviceState == DEVSTATE_FAILED ? F("OFFLINE") : F(""));
}
};
/**********************************************************************
* RSproto class
*
* This encapsulates the properties state of the bus and the
* transmission and reception of data across that bus. Each RSproto
* object owns a set of RSprotonode objects which represent the nodes
* attached to that bus.
**********************************************************************/
class RSproto : public IODevice {
private:
// Here we define the device-specific variables.
uint8_t _busNo;
unsigned long _baud;
unsigned long _cycleStartTime = 0;
unsigned long _timeoutStart = 0;
unsigned long _cycleTime; // target time between successive read/write cycles, microseconds
unsigned long _timeoutPeriod; // timeout on read responses, in microseconds.
unsigned long _currentMicros; // last value of micros() from _loop function.
unsigned long _postDelay; // delay time after transmission before switching off transmitter (in us)
unsigned long _byteTransmitTime; // time in us for transmission of one byte
int _operationCount = 0;
int _refreshOperation = 0;
static RSproto *_busList; // linked list of defined bus instances
bool waitReceive = false;
int _waitCounter = 0;
int _waitCounterB = 0;
int _waitA;
unsigned long _charTimeout;
unsigned long _frameTimeout;
enum {RDS_IDLE, RDS_DIGITAL, RDS_ANALOGUE}; // Read operation states
uint8_t _readState = RDS_IDLE;
unsigned long _lastDigitalRead = 0;
unsigned long _lastAnalogueRead = 0;
const unsigned long _digitalRefresh = 10000UL; // Delay refreshing digital inputs for 10ms
const unsigned long _analogueRefresh = 50000UL; // Delay refreshing analogue inputs for 50ms
// EX-IOExpander protocol flags
enum {
EXIOINIT = 0xE0, // Flag to initialise setup procedure
EXIORDY = 0xE1, // Flag we have completed setup procedure, also for EX-IO to ACK setup
EXIODPUP = 0xE2, // Flag we're sending digital pin pullup configuration
EXIOVER = 0xE3, // Flag to get version
EXIORDAN = 0xE4, // Flag to read an analogue input
EXIOWRD = 0xE5, // Flag for digital write
EXIORDD = 0xE6, // Flag to read digital input
EXIOENAN = 0xE7, // Flag to enable an analogue pin
EXIOINITA = 0xE8, // Flag we're receiving analogue pin mappings
EXIOPINS = 0xE9, // Flag we're receiving pin counts for buffers
EXIOWRAN = 0xEA, // Flag we're sending an analogue write (PWM)
EXIOERR = 0xEF, // Flag we've received an error
};
uint16_t _calculateCrc(uint8_t *buf, uint16_t len);
RSprotonode *_nodeListStart = NULL, *_nodeListEnd = NULL;
RSprotonode *_currentNode = NULL;
uint8_t _exceptionResponse = 0;
uint8_t getExceptionResponse();
uint16_t _receiveDataIndex = 0; // Index of next data byte to be received.
RSproto *_nextBus = NULL; // Pointer to next bus instance in list.
void setTimeout(unsigned long timeout);
// Helper function for error handling
void reportError(uint8_t status, bool fail=true) {
DIAG(F("EX-IOExpander485 Node:%d Error"), _currentNode->getNodeID());
if (fail)
_deviceState = DEVSTATE_FAILED;
}
public:
int _CommMode = 0;
int _opperation = 0;
uint16_t _pullup;
uint16_t _pin;
int8_t _txPin;
bool _busy = false;
int taskCnt = 0;
HardwareSerial *_serialD;
bool testAndStripMasterFlag(uint8_t *buf) {
if (buf[0] != 0xFF) return false; // why did we not get a master flag? bad node?
for (int i = 0; i < sizeof(buf)-1; i++) buf[i] = buf[i+1]; // shift array to begining
return true;
}
void updateCrc(uint8_t *buf, uint16_t len);
bool crcGood(uint8_t *buf, uint16_t len);
void clearRxBuffer();
static void create(HardwareSerial& serial, unsigned long baud, uint16_t cycleTimeMS=500, int8_t txPin=-1, int waitA=10) {
new RSproto(serial, baud, cycleTimeMS, txPin, waitA);
}
// Device-specific initialisation
void _begin() override {
_serialD->begin(_baud, SERIAL_8N1);
unsigned long bitsPerChar = 10;
if (_baud <= 19200) {
_charTimeout = (bitsPerChar * 2500000) / _baud;
_frameTimeout = (bitsPerChar * 4500000) / _baud;
}
else {
_charTimeout = (bitsPerChar * 1000000) / _baud + 750;
_frameTimeout = (bitsPerChar * 1000000) / _baud + 1750;
}
clearRxBuffer();
#if defined(RSproto_STM_OK)
pinMode(RSproto_STM_OK, OUTPUT);
ArduinoPins::fastWriteDigital(RSproto_STM_OK,LOW);
#endif
#if defined(RSproto_STM_FAIL)
pinMode(RSproto_STM_FAIL, OUTPUT);
ArduinoPins::fastWriteDigital(RSproto_STM_FAIL,LOW);
#endif
#if defined(RSproto_STM_COMM)
pinMode(RSproto_STM_COMM, OUTPUT);
ArduinoPins::fastWriteDigital(RSproto_STM_COMM,LOW);
#endif
#if defined(DIAG_IO)
_display();
#endif
}
// Loop function (overriding IODevice::_loop(unsigned long))
void _loop(unsigned long currentMicros) override;
// Display information about the device
void _display() override {
DIAG(F("EX-IOExpander485 Configured on Vpins:%d-%d %S"), _firstVpin, _firstVpin+_nPins-1,
_deviceState == DEVSTATE_FAILED ? F("OFFLINE") : F("OK"));
}
// Locate RSprotonode object with specified nodeID.
RSprotonode *findNode(uint8_t nodeID) {
for (RSprotonode *node = _nodeListStart; node != NULL; node = node->getNext()) {
if (node->getNodeID() == nodeID)
return node;
}
return NULL;
}
// Add new RSprotonode to the list of nodes for this bus.
void addNode(RSprotonode *newNode) {
if (!_nodeListStart)
_nodeListStart = newNode;
if (!_nodeListEnd)
_nodeListEnd = newNode;
else
_nodeListEnd->setNext(newNode);
//DIAG(F("RSproto: 260h nodeID:%d _nodeListStart:%d _nodeListEnd:%d"), newNode, _nodeListStart, _nodeListEnd);
}
protected:
RSproto(HardwareSerial &serial, unsigned long baud, uint16_t cycleTimeMS, int8_t txPin, int waitA);
public:
uint8_t getBusNumber() {
return _busNo;
}
RSproto *getNext() {
return _nextBus;
}
static RSproto *findBus(uint8_t busNo) {
for (RSproto *bus = _busList; bus != NULL; bus = bus->getNext()) {
if (bus->getBusNumber() == busNo)
return bus;
}
return NULL;
}
};
#endif // IO_RSproto_H
View Git Blame Copy Permalink