CommandStation-EX/EXRAIL2.h

/*
 *  © 2021 Neil McKechnie
 *  © 2020-2022 Chris Harlow
 *  All rights reserved.
 *  
 *  This file is part of CommandStation-EX
 *
 *  This is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *
 *  It is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
 */
#ifndef EXRAIL2_H
#define EXRAIL2_H
#include "FSH.h"
#include "IODevice.h"
   
// The following are the operation codes (or instructions) for a kind of virtual machine.
// Each instruction is normally 3 bytes long with an operation code followed by a parameter.
// In cases where more than one parameter is required, the first parameter is followed by one  
// or more OPCODE_PAD instructions with the subsequent parameters. This wastes a byte but makes 
// searching easier as a parameter can never be confused with an opcode. 
// 
enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,
             OPCODE_FWD,OPCODE_REV,OPCODE_SPEED,OPCODE_INVERT_DIRECTION,
             OPCODE_RESERVE,OPCODE_FREE,
             OPCODE_AT,OPCODE_AFTER,OPCODE_AUTOSTART,
             OPCODE_ATGTE,OPCODE_ATLT,
             OPCODE_ATTIMEOUT1,OPCODE_ATTIMEOUT2,OPCODE_IFTIMEOUT,
             OPCODE_LATCH,OPCODE_UNLATCH,OPCODE_SET,OPCODE_RESET,
             OPCODE_IF,OPCODE_IFNOT,OPCODE_ENDIF,OPCODE_IFRANDOM,OPCODE_IFRESERVE,
             OPCODE_IFCLOSED, OPCODE_IFTHROWN,OPCODE_ELSE,
             OPCODE_DELAY,OPCODE_DELAYMINS,OPCODE_DELAYMS,OPCODE_RANDWAIT,
             OPCODE_FON,OPCODE_FOFF,OPCODE_XFON,OPCODE_XFOFF,
             OPCODE_RED,OPCODE_GREEN,OPCODE_AMBER,OPCODE_DRIVE,
             OPCODE_SERVO,OPCODE_SIGNAL,OPCODE_TURNOUT,OPCODE_WAITFOR,
             OPCODE_PAD,OPCODE_FOLLOW,OPCODE_CALL,OPCODE_RETURN,
             OPCODE_JOIN,OPCODE_UNJOIN,OPCODE_READ_LOCO1,OPCODE_READ_LOCO2,OPCODE_POM,
             OPCODE_START,OPCODE_SETLOCO,OPCODE_SENDLOCO,
             OPCODE_PAUSE, OPCODE_RESUME,OPCODE_POWEROFF,OPCODE_POWERON,
             OPCODE_ONCLOSE, OPCODE_ONTHROW, OPCODE_SERVOTURNOUT, OPCODE_PINTURNOUT,
             OPCODE_PRINT,OPCODE_DCCACTIVATE,
             OPCODE_ONACTIVATE,OPCODE_ONDEACTIVATE,OPCODE_IFGTE,OPCODE_IFLT,
             OPCODE_ROSTER,OPCODE_SET_TRACK,
             OPCODE_ROUTE,OPCODE_AUTOMATION,OPCODE_SEQUENCE,OPCODE_ENDTASK,OPCODE_ENDEXRAIL
             };


 
  // Flag bits for status of hardware and TPL
  static const byte SECTION_FLAG = 0x80;
  static const byte LATCH_FLAG = 0x40;
  static const byte TASK_FLAG = 0x20;
  static const byte SPARE_FLAG = 0x10;
  static const byte COUNTER_MASK= 0x0F;

  static const byte  MAX_STACK_DEPTH=4;
 
   static const short MAX_FLAGS=256;
  #define FLAGOVERFLOW(x) x>=MAX_FLAGS

class LookList {
  public: 
    LookList(int16_t size);
    void add(int16_t lookup, int16_t result);
    int16_t find(int16_t value);
  private:
     int16_t m_size;
     int16_t m_loaded;
     int16_t * m_lookupArray;
     int16_t * m_resultArray;     
};

 class RMFT2 {
   public:
    static void begin();
    static void loop();
    RMFT2(int progCounter);
    RMFT2(int route, uint16_t cab);
    ~RMFT2();
    static void readLocoCallback(int16_t cv);
    static void emitWithrottleRouteList(Print* stream); 
    static void createNewTask(int route, uint16_t cab);
    static void turnoutEvent(int16_t id, bool closed);  
    static void activateEvent(int16_t addr, bool active);
    static void emitTurnoutDescription(Print* stream,int16_t id);
    static const byte rosterNameCount;
    static void emitWithrottleRoster(Print * stream);
    static const FSH * getRosterFunctions(int16_t cabid);
    static const int16_t SERVO_SIGNAL_FLAG=0x4000;
    static const int16_t ACTIVE_HIGH_SIGNAL_FLAG=0x2000;
  
private: 
    static void ComandFilter(Print * stream, byte & opcode, byte & paramCount, int16_t p[]);
    static bool parseSlash(Print * stream, byte & paramCount, int16_t p[]) ;
    static void streamFlags(Print* stream);
    static void setFlag(VPIN id,byte onMask, byte OffMask=0);
    static bool getFlag(VPIN id,byte mask); 
    static int16_t progtrackLocoId;
    static void doSignal(VPIN id,bool red, bool amber, bool green); 
    static void emitRouteDescription(Print * stream, char type, int id, const FSH * description);
    static void emitWithrottleDescriptions(Print * stream);
    
    static RMFT2 * loopTask;
    static RMFT2 * pausingTask;
    void delayMe(long millisecs);
    void driveLoco(byte speedo);
    bool readSensor(uint16_t sensorId);
    bool skipIfBlock();
    bool readLoco();
    void loop2();
    void kill(const FSH * reason=NULL,int operand=0);          
    void printMessage(uint16_t id);  // Built by RMFTMacros.h
    void printMessage2(const FSH * msg);
    
    
   static bool diag;
   static const  FLASH  byte RouteCode[];
   static const  FLASH  int16_t SignalDefinitions[];
   static byte flags[MAX_FLAGS];
   static LookList * sequenceLookup;
   static LookList * onThrowLookup;
   static LookList * onCloseLookup;
   static LookList * onActivateLookup;
   static LookList * onDeactivateLookup;

  // Local variables - exist for each instance/task 
    RMFT2 *next;   // loop chain 
    int progCounter;    // Byte offset of next route opcode in ROUTES table
    unsigned long delayStart; // Used by opcodes that must be recalled before completing
    unsigned long  delayTime;
    union {
      unsigned long waitAfter; // Used by OPCODE_AFTER
      unsigned long timeoutStart; // Used by OPCODE_ATTIMEOUT
    };
    bool timeoutFlag;
    byte  taskId;
    
    uint16_t loco;
    bool forward;
    bool invert;
    byte speedo;
    int16_t onTurnoutId;
    int16_t onActivateAddr;
    byte stackDepth;
    int callStack[MAX_STACK_DEPTH];
};
#endif