mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-11-30 03:26:13 +01:00
218 lines
7.5 KiB
C++
218 lines
7.5 KiB
C++
/*
|
|
* © 2021, Neil McKechnie. All rights reserved.
|
|
* Based on the work by DFRobot, Frank de Brabander and Marco Schwartz.
|
|
*
|
|
* This file is part of CommandStation-EX
|
|
*
|
|
* This is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* It is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with CommandStation-EX. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <Arduino.h>
|
|
#include "LiquidCrystal_I2C.h"
|
|
#include "I2CManager.h"
|
|
|
|
// When the display powers up, it is configured as follows:
|
|
//
|
|
// 1. Display clear
|
|
// 2. Function set:
|
|
// DL = 1; 8-bit interface data
|
|
// N = 0; 1-line display
|
|
// F = 0; 5x8 dot character font
|
|
// 3. Display on/off control:
|
|
// D = 0; Display off
|
|
// C = 0; Cursor off
|
|
// B = 0; Blinking off
|
|
// 4. Entry mode set:
|
|
// I/D = 1; Increment by 1
|
|
// S = 0; No shift
|
|
//
|
|
// Note, however, that resetting the Arduino doesn't reset the LCD, so we
|
|
// can't assume that its in that state when a sketch starts (and the
|
|
// LiquidCrystal constructor is called).
|
|
|
|
LiquidCrystal_I2C::LiquidCrystal_I2C(uint8_t lcd_Addr, uint8_t lcd_cols,
|
|
uint8_t lcd_rows) {
|
|
_Addr = lcd_Addr;
|
|
_cols = lcd_cols;
|
|
_rows = lcd_rows;
|
|
_backlightval = LCD_NOBACKLIGHT;
|
|
}
|
|
|
|
void LiquidCrystal_I2C::init() { init_priv(); }
|
|
|
|
void LiquidCrystal_I2C::init_priv() {
|
|
I2CManager.begin();
|
|
I2CManager.setClock(100000L); // PCF8574 is spec'd to 100kHz.
|
|
|
|
_displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS;
|
|
begin(_cols, _rows);
|
|
}
|
|
|
|
void LiquidCrystal_I2C::begin(uint8_t cols, uint8_t lines) {
|
|
if (lines > 1) {
|
|
_displayfunction |= LCD_2LINE;
|
|
}
|
|
_numlines = lines;
|
|
(void)cols; // Suppress compiler warning.
|
|
|
|
// according to datasheet, we need at least 40ms after power rises above 2.7V
|
|
// before sending commands. Arduino can turn on way befer 4.5V so we'll allow
|
|
// 100 milliseconds after pulling both RS and R/W and backlight pin low
|
|
expanderWrite(
|
|
_backlightval); // reset expander and turn backlight off (Bit 8 =1)
|
|
delay(100);
|
|
|
|
// put the LCD into 4 bit mode
|
|
// this is according to the hitachi HD44780 datasheet
|
|
// figure 24, pg 46
|
|
|
|
// we start in 8bit mode, try to set 4 bit mode
|
|
write4bits(0x03 << 4);
|
|
delayMicroseconds(4500); // wait min 4.1ms
|
|
|
|
// second try
|
|
write4bits(0x03 << 4);
|
|
delayMicroseconds(4500); // wait min 4.1ms
|
|
|
|
// third go!
|
|
write4bits(0x03 << 4);
|
|
delayMicroseconds(150);
|
|
|
|
// finally, set to 4-bit interface
|
|
write4bits(0x02 << 4);
|
|
|
|
// set # lines, font size, etc.
|
|
command(LCD_FUNCTIONSET | _displayfunction);
|
|
|
|
// turn the display on with no cursor or blinking default
|
|
_displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF;
|
|
display();
|
|
|
|
// clear it off
|
|
clear();
|
|
|
|
// Initialize to default text direction (for roman languages)
|
|
_displaymode = LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT;
|
|
|
|
// set the entry mode
|
|
command(LCD_ENTRYMODESET | _displaymode);
|
|
|
|
setCursor(0, 0);
|
|
}
|
|
|
|
/********** high level commands, for the user! */
|
|
void LiquidCrystal_I2C::clear() {
|
|
command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero
|
|
delayMicroseconds(2000); // this command takes 1.52ms
|
|
}
|
|
|
|
void LiquidCrystal_I2C::setCursor(uint8_t col, uint8_t row) {
|
|
int row_offsets[] = {0x00, 0x40, 0x14, 0x54};
|
|
if (row > _numlines) {
|
|
row = _numlines - 1; // we count rows starting w/0
|
|
}
|
|
command(LCD_SETDDRAMADDR | (col + row_offsets[row]));
|
|
}
|
|
|
|
// Turn the display on/off (quickly)
|
|
void LiquidCrystal_I2C::noDisplay() {
|
|
_displaycontrol &= ~LCD_DISPLAYON;
|
|
command(LCD_DISPLAYCONTROL | _displaycontrol);
|
|
}
|
|
|
|
void LiquidCrystal_I2C::display() {
|
|
_displaycontrol |= LCD_DISPLAYON;
|
|
command(LCD_DISPLAYCONTROL | _displaycontrol);
|
|
}
|
|
|
|
// Turn the (optional) backlight off/on
|
|
void LiquidCrystal_I2C::noBacklight(void) {
|
|
_backlightval = LCD_NOBACKLIGHT;
|
|
expanderWrite(0);
|
|
}
|
|
|
|
void LiquidCrystal_I2C::backlight(void) {
|
|
_backlightval = LCD_BACKLIGHT;
|
|
expanderWrite(0);
|
|
}
|
|
|
|
size_t LiquidCrystal_I2C::write(uint8_t value) {
|
|
send(value, Rs);
|
|
return 1;
|
|
}
|
|
|
|
/*********** mid level commands, for sending data/cmds */
|
|
|
|
inline void LiquidCrystal_I2C::command(uint8_t value) {
|
|
send(value, 0);
|
|
}
|
|
|
|
/************ low level data pushing commands **********/
|
|
|
|
/* According to the NXP Datasheet for the PCF8574 section 8.2:
|
|
* "The master (microcontroller) sends the START condition and slave address
|
|
* setting the last bit of the address byte to logic 0 for the write mode.
|
|
* The PCF8574/74A acknowledges and the master then sends the data byte for
|
|
* P7 to P0 to the port register. As the clock line goes HIGH, the 8-bit
|
|
* data is presented on the port lines after it has been acknowledged by the
|
|
* PCF8574/74A. [...] The master can then send a STOP or ReSTART condition
|
|
* or continue sending data. The number of data bytes that can be sent
|
|
* successively is not limited and the previous data is overwritten every
|
|
* time a data byte has been sent and acknowledged."
|
|
*
|
|
* This driver takes advantage of this by sending multiple data bytes in succession
|
|
* within a single I2C transmission. With a fast clock rate of 400kHz, the time
|
|
* between successive updates of the PCF8574 outputs will be at least 2.5us. With
|
|
* the default clock rate of 100kHz the time between updates will be at least 10us.
|
|
*
|
|
* The LCD controller HD44780, according to its datasheet, needs nominally 37us
|
|
* (up to 50us) to execute a command (i.e. write to gdram, reposition, etc.). Each
|
|
* command is sent in a separate I2C transmission here. The time taken to end a
|
|
* transmission and start another one is a stop bit, a start bit, 8 address bits,
|
|
* an ack, 8 data bits and another ack; this is at least 20 bits, i.e. >50us
|
|
* at 400kHz and >200us at 100kHz. Therefore, we don't need additional delay.
|
|
*
|
|
* Similarly, the Enable must be set/reset for at least 450ns. This is
|
|
* well within the I2C clock cycle time of 2.5us at 400kHz. Data is clocked in
|
|
* to the HD44780 on the trailing edge of the Enable pin, so we set the Enable
|
|
* as we present the data, then in the next byte we reset Enable without changing
|
|
* the data.
|
|
*/
|
|
|
|
// write either command or data (8 bits) to the HD44780 LCD controller as
|
|
// a single I2C transmission.
|
|
void LiquidCrystal_I2C::send(uint8_t value, uint8_t mode) {
|
|
mode |= _backlightval;
|
|
uint8_t highnib = (value & 0xf0) | mode;
|
|
uint8_t lownib = ((value << 4) & 0xf0) | mode;
|
|
// Send both nibbles
|
|
byte buffer[] = {(byte)(highnib|En), highnib, (byte)(lownib|En), lownib};
|
|
I2CManager.write(_Addr, buffer, sizeof(buffer));
|
|
}
|
|
|
|
// write 4 bits to the HD44780 LCD controller.
|
|
void LiquidCrystal_I2C::write4bits(uint8_t value) {
|
|
uint8_t _data = value | _backlightval;
|
|
// Enable must be set/reset for at least 450ns. This is well within the
|
|
// I2C clock cycle time of 2.5us at 400kHz. Data is clocked in to the
|
|
// HD44780 on the trailing edge of the Enable pin.
|
|
byte buffer[] = {(byte)(_data|En), _data};
|
|
I2CManager.write(_Addr, buffer, sizeof(buffer));
|
|
}
|
|
|
|
// write a byte to the PCF8574 I2C interface. We don't need to set
|
|
// the enable pin for this.
|
|
void LiquidCrystal_I2C::expanderWrite(uint8_t value) {
|
|
I2CManager.write(_Addr, 1, value | _backlightval);
|
|
} |