mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-11-30 03:26:13 +01:00
231 lines
9.0 KiB
C
231 lines
9.0 KiB
C
/*
|
|
* © 2023, Neil McKechnie. All rights reserved.
|
|
*
|
|
* This file is part of CommandStation-EX
|
|
*
|
|
* This is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* It is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef I2CMANAGER_AVR_H
|
|
#define I2CMANAGER_AVR_H
|
|
|
|
#include <Arduino.h>
|
|
#include "I2CManager.h"
|
|
#include "I2CManager_NonBlocking.h" // to satisfy intellisense
|
|
|
|
#include <avr/io.h>
|
|
#include <avr/interrupt.h>
|
|
|
|
/****************************************************************************
|
|
TWI State codes
|
|
****************************************************************************/
|
|
// General TWI Master staus codes
|
|
#define TWI_START 0x08 // START has been transmitted
|
|
#define TWI_REP_START 0x10 // Repeated START has been transmitted
|
|
#define TWI_ARB_LOST 0x38 // Arbitration lost
|
|
|
|
// TWI Master Transmitter staus codes
|
|
#define TWI_MTX_ADR_ACK 0x18 // SLA+W has been tramsmitted and ACK received
|
|
#define TWI_MTX_ADR_NACK 0x20 // SLA+W has been tramsmitted and NACK received
|
|
#define TWI_MTX_DATA_ACK 0x28 // Data byte has been tramsmitted and ACK received
|
|
#define TWI_MTX_DATA_NACK 0x30 // Data byte has been tramsmitted and NACK received
|
|
|
|
// TWI Master Receiver staus codes
|
|
#define TWI_MRX_ADR_ACK 0x40 // SLA+R has been tramsmitted and ACK received
|
|
#define TWI_MRX_ADR_NACK 0x48 // SLA+R has been tramsmitted and NACK received
|
|
#define TWI_MRX_DATA_ACK 0x50 // Data byte has been received and ACK tramsmitted
|
|
#define TWI_MRX_DATA_NACK 0x58 // Data byte has been received and NACK tramsmitted
|
|
|
|
// TWI Miscellaneous status codes
|
|
#define TWI_NO_STATE 0xF8 // No relevant state information available
|
|
#define TWI_BUS_ERROR 0x00 // Bus error due to an illegal START or STOP condition
|
|
|
|
#define TWI_TWBR ((F_CPU / I2C_FREQ) - 16) / 2 // TWI Bit rate Register setting.
|
|
|
|
#if defined(I2C_USE_INTERRUPTS)
|
|
#define ENABLE_TWI_INTERRUPT (1<<TWIE)
|
|
#else
|
|
#define ENABLE_TWI_INTERRUPT 0
|
|
#endif
|
|
|
|
/***************************************************************************
|
|
* Set I2C clock speed register.
|
|
***************************************************************************/
|
|
void I2CManagerClass::I2C_setClock(unsigned long i2cClockSpeed) {
|
|
unsigned long temp = ((F_CPU / i2cClockSpeed) - 16) / 2;
|
|
for (uint8_t preScaler = 0; preScaler<=3; preScaler++) {
|
|
if (temp <= 255) {
|
|
TWBR = temp;
|
|
TWSR = (TWSR & 0xfc) | preScaler;
|
|
return;
|
|
} else
|
|
temp /= 4;
|
|
}
|
|
// Set slowest speed ~= 500 bits/sec
|
|
TWBR = 255;
|
|
TWSR |= 0x03;
|
|
}
|
|
|
|
/***************************************************************************
|
|
* Initialise I2C registers.
|
|
***************************************************************************/
|
|
void I2CManagerClass::I2C_init()
|
|
{
|
|
TWSR = 0;
|
|
TWBR = TWI_TWBR; // Set bit rate register (Baudrate). Defined in header file.
|
|
TWDR = 0xFF; // Default content = SDA released.
|
|
TWCR = (1<<TWINT); // Clear interrupt flag
|
|
|
|
pinMode(SDA, INPUT_PULLUP);
|
|
pinMode(SCL, INPUT_PULLUP);
|
|
}
|
|
|
|
/***************************************************************************
|
|
* Initiate a start bit for transmission.
|
|
***************************************************************************/
|
|
void I2CManagerClass::I2C_sendStart() {
|
|
rxCount = 0;
|
|
txCount = 0;
|
|
// We may have already triggered a stop bit in the same run as this. To avoid
|
|
// clearing that bit before the stop bit has been sent, we can either wait for
|
|
// it to complete or we can OR the bit onto the existing bits.
|
|
TWCR |= (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT)|(1<<TWEA)|(1<<TWSTA); // Send Start
|
|
|
|
}
|
|
|
|
/***************************************************************************
|
|
* Initiate a stop bit for transmission (does not interrupt)
|
|
***************************************************************************/
|
|
void I2CManagerClass::I2C_sendStop() {
|
|
TWDR = 0xff; // Default condition = SDA released
|
|
TWCR = (1<<TWEN)|(1<<TWINT)|(1<<TWSTO); // Send Stop
|
|
}
|
|
|
|
/***************************************************************************
|
|
* Close I2C down
|
|
***************************************************************************/
|
|
void I2CManagerClass::I2C_close() {
|
|
// disable TWI
|
|
TWCR = (1<<TWINT); // clear any interrupt and stop twi.
|
|
delayMicroseconds(10); // Wait for things to stabilise (hopefully)
|
|
}
|
|
|
|
/***************************************************************************
|
|
* Main state machine for I2C, called from interrupt handler or,
|
|
* if I2C_USE_INTERRUPTS isn't defined, from the I2CManagerClass::loop() function
|
|
* (and therefore, indirectly, from I2CRB::wait() and I2CRB::isBusy()).
|
|
***************************************************************************/
|
|
|
|
void I2CManagerClass::I2C_handleInterrupt() {
|
|
if (!(TWCR & (1<<TWINT))) return; // Nothing to do.
|
|
|
|
uint8_t twsr = TWSR & 0xF8;
|
|
|
|
|
|
// Main I2C interrupt handler, used for the device communications.
|
|
// The following variables are used:
|
|
// bytesToSend, bytesToReceive (R/W)
|
|
// txCount, rxCount (W)
|
|
// deviceAddress (R)
|
|
// sendBuffer, receiveBuffer (R)
|
|
// operation (R)
|
|
// state, completionStatus (W)
|
|
//
|
|
// Cases are ordered so that the most frequently used ones are tested first.
|
|
switch (twsr) {
|
|
case TWI_MTX_DATA_ACK: // Data byte has been transmitted and ACK received
|
|
case TWI_MTX_ADR_ACK: // SLA+W has been transmitted and ACK received
|
|
if (bytesToSend) { // Send first.
|
|
if (operation == OPERATION_SEND_P)
|
|
TWDR = GETFLASH(sendBuffer + (txCount++));
|
|
else
|
|
TWDR = sendBuffer[txCount++];
|
|
bytesToSend--;
|
|
TWCR = (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT);
|
|
} else if (bytesToReceive) { // All sent, anything to receive?
|
|
// Don't need to wait for stop, as the interface won't send the start until
|
|
// any in-progress stop condition from previous interrupts has been sent.
|
|
TWCR = (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT)|(1<<TWSTA); // Send Start
|
|
} else {
|
|
// Nothing left to send or receive
|
|
TWCR = (1<<TWEN)|(1<<TWINT)|(1<<TWEA)|(1<<TWSTO); // Send Stop
|
|
state = I2C_STATE_COMPLETED;
|
|
}
|
|
break;
|
|
|
|
case TWI_MRX_DATA_ACK: // Data byte has been received and ACK transmitted
|
|
if (bytesToReceive > 0) {
|
|
receiveBuffer[rxCount++] = TWDR;
|
|
bytesToReceive--;
|
|
}
|
|
/* fallthrough */
|
|
|
|
case TWI_MRX_ADR_ACK: // SLA+R has been sent and ACK received
|
|
if (bytesToReceive <= 1) {
|
|
TWCR = (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT); // Send NACK after next reception
|
|
} else {
|
|
// send ack
|
|
TWCR = (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT)|(1<<TWEA);
|
|
}
|
|
break;
|
|
|
|
case TWI_MRX_DATA_NACK: // Data byte has been received and NACK transmitted
|
|
if (bytesToReceive > 0) {
|
|
receiveBuffer[rxCount++] = TWDR;
|
|
bytesToReceive--;
|
|
}
|
|
TWCR = (1<<TWEN)|(1<<TWINT)|(1<<TWEA)|(1<<TWSTO); // Send Stop
|
|
state = I2C_STATE_COMPLETED;
|
|
break;
|
|
|
|
case TWI_START: // START has been transmitted
|
|
case TWI_REP_START: // Repeated START has been transmitted
|
|
// Set up address and R/W
|
|
if (operation == OPERATION_READ || (operation==OPERATION_REQUEST && !bytesToSend))
|
|
TWDR = (deviceAddress << 1) | 1; // SLA+R
|
|
else
|
|
TWDR = (deviceAddress << 1) | 0; // SLA+W
|
|
TWCR = (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT)|(1<<TWEA);
|
|
break;
|
|
|
|
case TWI_MTX_ADR_NACK: // SLA+W has been transmitted and NACK received
|
|
case TWI_MRX_ADR_NACK: // SLA+R has been transmitted and NACK received
|
|
case TWI_MTX_DATA_NACK: // Data byte has been transmitted and NACK received
|
|
TWCR = (1<<TWEN)|(1<<TWINT)|(1<<TWEA)|(1<<TWSTO); // Send Stop
|
|
completionStatus = I2C_STATUS_NEGATIVE_ACKNOWLEDGE;
|
|
state = I2C_STATE_COMPLETED;
|
|
break;
|
|
|
|
case TWI_ARB_LOST: // Arbitration lost
|
|
// Restart transaction from start.
|
|
I2C_sendStart();
|
|
break;
|
|
|
|
case TWI_BUS_ERROR: // Bus error due to an illegal START or STOP condition
|
|
default:
|
|
TWDR = 0xff; // Default condition = SDA released
|
|
TWCR = (1<<TWEN)|(1<<TWINT)|(1<<TWEA)|(1<<TWSTO); // Send Stop
|
|
completionStatus = I2C_STATUS_TRANSMIT_ERROR;
|
|
state = I2C_STATE_COMPLETED;
|
|
}
|
|
}
|
|
|
|
#if defined(I2C_USE_INTERRUPTS)
|
|
ISR(TWI_vect) {
|
|
I2CManager.handleInterrupt();
|
|
}
|
|
#endif
|
|
|
|
#endif /* I2CMANAGER_AVR_H */
|