mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-23 12:51:24 +01:00
4f16a4ca06
Previously, pullups were enabled on GPIO Expander digital pins by default, even if the pin was only ever used as an output. This could lead to a spurious HIGH state being seen by external equipment before the output is initialised to LOW. To avoid this, the pin pullup is now not enabled until a configure or read operation is issued for the pin.
102 lines
3.7 KiB
C++
102 lines
3.7 KiB
C++
/*
|
|
* © 2021, Neil McKechnie. All rights reserved.
|
|
*
|
|
* This file is part of DCC++EX API
|
|
*
|
|
* This is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* It is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* The PCF8574 is a simple device; it only has one register. The device
|
|
* input/output mode and pullup are configured through this, and the
|
|
* output state is written and the input state read through it too.
|
|
*
|
|
* This is accomplished by having a weak resistor in series with the output,
|
|
* and a read-back of the other end of the resistor. As an output, the
|
|
* pin state is set to 1 or 0, and the output voltage goes to +5V or 0V
|
|
* (through the weak resistor).
|
|
*
|
|
* In order to use the pin as an input, the output is written as
|
|
* a '1' in order to pull up the resistor. Therefore the input will be
|
|
* 1 unless the pin is pulled down externally, in which case it will be 0.
|
|
*
|
|
* As a consequence of this approach, it is not possible to use the device for
|
|
* inputs without pullups.
|
|
*/
|
|
|
|
#ifndef IO_PCF8574_H
|
|
#define IO_PCF8574_H
|
|
|
|
#include "IO_GPIOBase.h"
|
|
|
|
class PCF8574 : public GPIOBase<uint8_t> {
|
|
public:
|
|
static void create(VPIN firstVpin, uint8_t nPins, uint8_t I2CAddress, int interruptPin=-1) {
|
|
new PCF8574(firstVpin, nPins, I2CAddress, interruptPin);
|
|
}
|
|
|
|
PCF8574(VPIN firstVpin, uint8_t nPins, uint8_t I2CAddress, int interruptPin=-1)
|
|
: GPIOBase<uint8_t>((FSH *)F("PCF8574"), firstVpin, min(nPins, 8), I2CAddress, interruptPin)
|
|
{
|
|
requestBlock.setReadParams(_I2CAddress, inputBuffer, 1);
|
|
}
|
|
|
|
private:
|
|
// The pin state is '1' if the pin is an input or if it is an output set to 1. Zero otherwise.
|
|
void _writeGpioPort() override {
|
|
I2CManager.write(_I2CAddress, 1, _portOutputState | ~_portMode);
|
|
}
|
|
|
|
// The PCF8574 handles inputs by applying a weak pull-up when output is driven to '1'.
|
|
// Therefore, writing '1' in _writePortModes is enough to set the module to input mode
|
|
// and enable pull-up.
|
|
void _writePullups() override { }
|
|
|
|
// The pin state is '1' if the pin is an input or if it is an output set to 1. Zero otherwise.
|
|
void _writePortModes() override {
|
|
I2CManager.write(_I2CAddress, 1, _portOutputState | ~_portMode);
|
|
}
|
|
|
|
// In immediate mode, _readGpioPort reads the device GPIO port and updates _portInputState accordingly.
|
|
// When not in immediate mode, it initiates a request using the request block and returns.
|
|
// When the request completes, _processCompletion finishes the operation.
|
|
void _readGpioPort(bool immediate) override {
|
|
if (immediate) {
|
|
uint8_t buffer[1];
|
|
I2CManager.read(_I2CAddress, buffer, 1);
|
|
_portInputState = ((uint16_t)buffer) & 0xff;
|
|
} else {
|
|
requestBlock.wait(); // Wait for preceding operation to complete
|
|
// Issue new request to read GPIO register
|
|
I2CManager.queueRequest(&requestBlock);
|
|
}
|
|
}
|
|
|
|
// This function is invoked when an I/O operation on the requestBlock completes.
|
|
void _processCompletion(uint8_t status) override {
|
|
if (status == I2C_STATUS_OK)
|
|
_portInputState = ((uint16_t)inputBuffer[0]) & 0xff;
|
|
else
|
|
_portInputState = 0xff;
|
|
}
|
|
|
|
// Set up device ports
|
|
void _setupDevice() override {
|
|
_writePortModes();
|
|
}
|
|
|
|
uint8_t inputBuffer[1];
|
|
};
|
|
|
|
#endif |