CommandStation-EX/I2CManager_Mega4809.h

/*
 *  © 2023, Neil McKechnie. All rights reserved.
 *
 *  This file is part of CommandStation-EX
 *
 *  This is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 *
 *  It is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
 */

#ifndef I2CMANAGER_MEGA4809_H
#define I2CMANAGER_MEGA4809_H

#include <Arduino.h>
#include "I2CManager.h"

/***************************************************************************
 *  Set I2C clock speed register.
 ***************************************************************************/
void I2CManagerClass::I2C_setClock(unsigned long i2cClockSpeed) {
  uint16_t t_rise;
  if (i2cClockSpeed < 200000)
    t_rise = 1000;
  else if (i2cClockSpeed < 800000)
    t_rise = 300;
  else
    t_rise = 120;

  if (t_rise == 120)
    TWI0.CTRLA |= TWI_FMPEN_bm;
  else
    TWI0.CTRLA &= ~TWI_FMPEN_bm;
  
  uint32_t baud = (F_CPU_CORRECTED / i2cClockSpeed - F_CPU_CORRECTED / 1000 / 1000
    * t_rise / 1000 - 10) / 2;
  if (baud > 255) baud = 255;  // ~30kHz
  TWI0.MBAUD = (uint8_t)baud;
}

/***************************************************************************
 *  Initialise I2C registers.
 ***************************************************************************/
void I2CManagerClass::I2C_init()
{ 
  pinMode(PIN_WIRE_SDA, INPUT_PULLUP);
  pinMode(PIN_WIRE_SCL, INPUT_PULLUP);
  PORTMUX.TWISPIROUTEA |= TWI_MUX;
  I2C_setClock(I2C_FREQ);

#if defined(I2C_USE_INTERRUPTS)
  TWI0.MCTRLA = TWI_RIEN_bm | TWI_WIEN_bm | TWI_ENABLE_bm;
#else
  TWI0.MCTRLA = TWI_ENABLE_bm;
#endif
  TWI0.MSTATUS = TWI_BUSSTATE_IDLE_gc;
}

/***************************************************************************
 *  Initiate a start bit for transmission, followed by address and R/W
 ***************************************************************************/
void I2CManagerClass::I2C_sendStart() {
  txCount = 0;
  rxCount = 0;

  // If anything to send, initiate write.  Otherwise initiate read.
  if (operation == OPERATION_READ || ((operation == OPERATION_REQUEST) && !bytesToSend))
    TWI0.MADDR = (currentRequest->i2cAddress << 1) | 1;
  else
    TWI0.MADDR = (currentRequest->i2cAddress << 1) | 0;
}

/***************************************************************************
 *  Initiate a stop bit for transmission.
 ***************************************************************************/
void I2CManagerClass::I2C_sendStop() {
  TWI0.MCTRLB = TWI_MCMD_STOP_gc;
}

/***************************************************************************
 *  Close I2C down
 ***************************************************************************/
void I2CManagerClass::I2C_close() {

  TWI0.MCTRLA &= ~(TWI_RIEN_bm | TWI_WIEN_bm | TWI_ENABLE_bm);        // Switch off I2C
  TWI0.MSTATUS = TWI_BUSSTATE_UNKNOWN_gc;
  delayMicroseconds(10);  // Wait for things to stabilise (hopefully)
}

/***************************************************************************
 *  Main state machine for I2C, called from interrupt handler.
 ***************************************************************************/
void I2CManagerClass::I2C_handleInterrupt() {
  
  uint8_t currentStatus = TWI0.MSTATUS;

  if (currentStatus & TWI_ARBLOST_bm) {
    // Arbitration lost, restart
    TWI0.MSTATUS = currentStatus; // clear all flags
    I2C_sendStart();   // Reinitiate request
  } else if (currentStatus & TWI_BUSERR_bm) {
    // Bus error
    completionStatus = I2C_STATUS_BUS_ERROR;
    state = I2C_STATE_COMPLETED;
    TWI0.MSTATUS = currentStatus; // clear all flags
  } else if (currentStatus & TWI_WIF_bm) {
    // Master write completed
    if (currentStatus & TWI_RXACK_bm) {
      // Nacked, send stop.
      TWI0.MCTRLB = TWI_MCMD_STOP_gc;
      completionStatus = I2C_STATUS_NEGATIVE_ACKNOWLEDGE;
      state = I2C_STATE_COMPLETED;

    } else if (bytesToSend) {
      // Acked, so send next byte (don't need to use GETFLASH)
      TWI0.MDATA = sendBuffer[txCount++];
      bytesToSend--;
    } else if (bytesToReceive) {
      // Last sent byte acked and no more to send.  Send repeated start, address and read bit.
      TWI0.MADDR = (deviceAddress << 1) | 1;
    } else {
      // No more data to send/receive. Initiate a STOP condition.
      TWI0.MCTRLB = TWI_MCMD_STOP_gc;
      state = I2C_STATE_COMPLETED;
    }
  } else if (currentStatus & TWI_RIF_bm) {
    // Master read completed without errors
    if (bytesToReceive) {
      receiveBuffer[rxCount++] = TWI0.MDATA;  // Store received byte
      bytesToReceive--;
    } 
    if (bytesToReceive) {
      // More bytes to receive, issue ack and start another read
      TWI0.MCTRLB = TWI_MCMD_RECVTRANS_gc;
    } else {
      // Transaction finished, issue NACK and STOP.
      TWI0.MCTRLB = TWI_ACKACT_bm | TWI_MCMD_STOP_gc;
      state = I2C_STATE_COMPLETED;
    }
  }
}


/***************************************************************************
 *  Interrupt handler.
 ***************************************************************************/
ISR(TWI0_TWIM_vect) {
  I2CManager.handleInterrupt();
}

#endif