mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-11-23 08:06:13 +01:00
503 lines
16 KiB
C++
503 lines
16 KiB
C++
#include "DCC.h"
|
|
#include "DCCWaveform.h"
|
|
#include "DIAG.h"
|
|
#include "Hardware.h"
|
|
|
|
// This module is responsible for converting API calls into
|
|
// messages to be sent to the waveform generator.
|
|
// It has no visibility of the hardware, timers, interrupts
|
|
// nor of the waveform issues such as preambles, start bits checksums or cutouts.
|
|
//
|
|
// Nor should it have to deal with JMRI responsess other than the OK/FAIL
|
|
// or cv value returned. I will move that back to the JMRI interface later
|
|
//
|
|
// The interface to the waveform generator is narrowed down to merely:
|
|
// Scheduling a message on the prog or main track using a function
|
|
// Obtaining ACKs from the prog track using a function
|
|
// There are no volatiles here.
|
|
|
|
void DCC::begin() {
|
|
DCCWaveform::begin();
|
|
}
|
|
|
|
void DCC::setThrottle( uint16_t cab, uint8_t tSpeed, bool tDirection) {
|
|
byte speedCode = tSpeed + (tSpeed > 0) + tDirection * 128; // max speed is 126, but speed codes range from 2-127 (0=stop, 1=emergency stop)
|
|
setThrottle2(cab, speedCode);
|
|
// retain speed for loco reminders
|
|
updateLocoReminder(cab, speedCode );
|
|
}
|
|
|
|
void DCC::setThrottle2( uint16_t cab, byte speedCode) {
|
|
|
|
uint8_t b[4];
|
|
uint8_t nB = 0;
|
|
|
|
if (cab > 127)
|
|
b[nB++] = highByte(cab) | 0xC0; // convert train number into a two-byte address
|
|
b[nB++] = lowByte(cab);
|
|
b[nB++] = SET_SPEED; // 128-step speed control byte
|
|
b[nB++] = speedCode; // for encoding see setThrottle
|
|
|
|
DCCWaveform::mainTrack.schedulePacket(b, nB, 0);
|
|
}
|
|
|
|
void DCC::setFunction(int cab, byte byte1) {
|
|
uint8_t b[3];
|
|
uint8_t nB = 0;
|
|
|
|
if (cab > 127)
|
|
b[nB++] = highByte(cab) | 0xC0; // convert train number into a two-byte address
|
|
b[nB++] = lowByte(cab);
|
|
b[nB++] = (byte1 | 0x80) & 0xBF;
|
|
|
|
DCCWaveform::mainTrack.schedulePacket(b, nB, 4); // Repeat the packet four times
|
|
}
|
|
|
|
void DCC::setFunction(int cab, byte byte1, byte byte2) {
|
|
byte b[4];
|
|
byte nB = 0;
|
|
|
|
if (cab > 127)
|
|
b[nB++] = highByte(cab) | 0xC0; // convert train number into a two-byte address
|
|
b[nB++] = lowByte(cab);
|
|
b[nB++] = (byte1 | 0xDE) & 0xDF; // for safety this guarantees that first byte will either be 0xDE (for F13-F20) or 0xDF (for F21-F28)
|
|
b[nB++] = byte2;
|
|
|
|
DCCWaveform::mainTrack.schedulePacket(b, nB, 4); // Repeat the packet four times
|
|
}
|
|
|
|
void DCC::setAccessory(int address, byte number, bool activate) {
|
|
byte b[2];
|
|
|
|
b[0] = address % 64 + 128; // first byte is of the form 10AAAAAA, where AAAAAA represent 6 least signifcant bits of accessory address
|
|
b[1] = ((((address / 64) % 8) << 4) + (number % 4 << 1) + activate % 2) ^ 0xF8; // second byte is of the form 1AAACDDD, where C should be 1, and the least significant D represent activate/deactivate
|
|
|
|
DCCWaveform::mainTrack.schedulePacket(b, 2, 4); // Repeat the packet four times
|
|
}
|
|
|
|
void DCC::writeCVByteMain(int cab, int cv, byte bValue) {
|
|
byte b[5];
|
|
byte nB = 0;
|
|
if (cab > 127)
|
|
b[nB++] = highByte(cab) | 0xC0; // convert train number into a two-byte address
|
|
|
|
b[nB++] = lowByte(cab);
|
|
b[nB++] = cv1(WRITE_BYTE_MAIN, cv); // any CV>1023 will become modulus(1024) due to bit-mask of 0x03
|
|
b[nB++] = cv2(cv);
|
|
b[nB++] = bValue;
|
|
|
|
DCCWaveform::mainTrack.schedulePacket(b, nB, 4);
|
|
}
|
|
|
|
void DCC::writeCVBitMain(int cab, int cv, byte bNum, bool bValue) {
|
|
byte b[5];
|
|
byte nB = 0;
|
|
bValue = bValue % 2;
|
|
bNum = bNum % 8;
|
|
|
|
if (cab > 127)
|
|
b[nB++] = highByte(cab) | 0xC0; // convert train number into a two-byte address
|
|
|
|
b[nB++] = lowByte(cab);
|
|
b[nB++] = cv1(WRITE_BIT_MAIN, cv); // any CV>1023 will become modulus(1024) due to bit-mask of 0x03
|
|
b[nB++] = cv2(cv);
|
|
b[nB++] = WRITE_BIT | (bValue ? BIT_ON : BIT_OFF) | bNum;
|
|
|
|
DCCWaveform::mainTrack.schedulePacket(b, nB, 4);
|
|
}
|
|
|
|
|
|
|
|
const ackOp PROGMEM WRITE_BIT0_PROG[] = {
|
|
BASELINE,
|
|
W0,WACK,
|
|
V0, WACK, // validate bit is 0
|
|
ITC1, // if acked, callback(1)
|
|
FAIL // callback (-1)
|
|
};
|
|
const ackOp PROGMEM WRITE_BIT1_PROG[] = {
|
|
BASELINE,
|
|
W1,WACK,
|
|
V1, WACK, // validate bit is 1
|
|
ITC1, // if acked, callback(1)
|
|
FAIL // callback (-1)
|
|
};
|
|
|
|
|
|
const ackOp PROGMEM READ_BIT_PROG[] = {
|
|
BASELINE,
|
|
V1, WACK, // validate bit is 1
|
|
ITC1, // if acked, callback(1)
|
|
V0, WACK, // validate bit is zero
|
|
ITC0, // if acked callback 0
|
|
FAIL // bit not readable
|
|
};
|
|
|
|
const ackOp PROGMEM WRITE_BYTE_PROG[] = {
|
|
BASELINE,
|
|
WB,WACK, // Write
|
|
VB,WACK, // validate byte
|
|
ITC1, // if ok callback (1)
|
|
FAIL // callback (-1)
|
|
};
|
|
|
|
|
|
const ackOp PROGMEM READ_CV_PROG[] = {
|
|
BASELINE,
|
|
STARTMERGE, //clear bit and byte values ready for merge pass
|
|
// each bit is validated against 0 and the result inverted in MERGE
|
|
// this is because there tend to be more zeros in cv values than ones.
|
|
// There is no need for one validation as entire byte is validated at the end
|
|
V0, WACK, MERGE, // read and merge bit 0
|
|
V0, WACK, MERGE, // read and merge bit 1 etc
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
VB, WACK, ITCB, // verify merged byte and return it if acked ok
|
|
FAIL }; // verification failed
|
|
|
|
|
|
const ackOp PROGMEM LOCO_ID_PROG[] = {
|
|
BASELINE,
|
|
SETCV,(ackOp)29,
|
|
SETBIT,(ackOp)5,
|
|
V0, WACK, ITSKIP, // Skip to SKIPTARGET if bit 5 of CV29 is zero
|
|
// Long locoid
|
|
SETCV, (ackOp)17, // CV 17 is part of locoid
|
|
STARTMERGE,
|
|
V0, WACK, MERGE, // read and merge bit 1 etc
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
VB, WACK, NAKFAIL, // verify merged byte and return -1 it if not acked ok
|
|
STASHLOCOID, // keep stashed cv 17 for later
|
|
// Read 2nd part from CV 18
|
|
SETCV, (ackOp)18,
|
|
STARTMERGE,
|
|
V0, WACK, MERGE, // read and merge bit 1 etc
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
VB, WACK, NAKFAIL, // verify merged byte and return -1 it if not acked ok
|
|
COMBINELOCOID, // Combile byte with stash to make long locoid and callback
|
|
|
|
// ITSKIP Skips to here if CV 29 bit 5 was zero. so read CV 1 and return that
|
|
SKIPTARGET,
|
|
SETCV, (ackOp)1,
|
|
STARTMERGE,
|
|
V0, WACK, MERGE, // read and merge bit 1 etc
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
V0, WACK, MERGE,
|
|
VB, WACK, ITCB, // verify merged byte and callback
|
|
FAIL
|
|
};
|
|
|
|
|
|
|
|
void DCC::writeCVByte(int cv, byte byteValue, ACK_CALLBACK callback) {
|
|
ackManagerSetup(cv, byteValue, WRITE_BYTE_PROG, callback);
|
|
}
|
|
|
|
|
|
void DCC::writeCVBit(int cv, byte bitNum, bool bitValue, ACK_CALLBACK callback) {
|
|
if (bitNum >= 8) callback(-1);
|
|
else ackManagerSetup(cv, bitNum, bitValue?WRITE_BIT1_PROG:WRITE_BIT0_PROG, callback);
|
|
}
|
|
|
|
|
|
void DCC::readCVBit(int cv, byte bitNum, ACK_CALLBACK callback) {
|
|
if (bitNum >= 8) callback(-1);
|
|
else ackManagerSetup(cv, bitNum,READ_BIT_PROG, callback);
|
|
}
|
|
|
|
void DCC::readCV(int cv, ACK_CALLBACK callback) {
|
|
ackManagerSetup(cv, 0,READ_CV_PROG, callback);
|
|
}
|
|
|
|
void DCC::getLocoId(ACK_CALLBACK callback) {
|
|
ackManagerSetup(0,0, LOCO_ID_PROG, callback);
|
|
}
|
|
|
|
void DCC::forgetLoco(int cab) { // removes any speed reminders for this loco
|
|
for (int i=0;i<MAX_LOCOS;i++) if (speedTable[i].loco=cab) speedTable[i].loco=0;
|
|
}
|
|
void DCC::forgetAllLocos() { // removes all speed reminders
|
|
for (int i=0;i<MAX_LOCOS;i++) speedTable[i].loco=0;
|
|
}
|
|
|
|
|
|
void DCC::loop() {
|
|
DCCWaveform::loop(); // power overload checks
|
|
ackManagerLoop();
|
|
// if the main track transmitter still has a pending packet, skip this loop.
|
|
if ( DCCWaveform::mainTrack.packetPending) return;
|
|
|
|
// each time around the Arduino loop, we resend a loco speed packet reminder
|
|
for (; nextLoco < MAX_LOCOS; nextLoco++) {
|
|
if (speedTable[nextLoco].loco > 0) {
|
|
setThrottle2(speedTable[nextLoco].loco, speedTable[nextLoco].speedCode);
|
|
nextLoco++;
|
|
return;
|
|
}
|
|
}
|
|
for (nextLoco = 0; nextLoco < MAX_LOCOS; nextLoco++) {
|
|
if (speedTable[nextLoco].loco > 0) {
|
|
setThrottle2(speedTable[nextLoco].loco, speedTable[nextLoco].speedCode);
|
|
nextLoco++;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
///// Private helper functions below here /////////////////////
|
|
|
|
byte DCC::cv1(byte opcode, int cv) {
|
|
cv--;
|
|
return (highByte(cv) & (byte)0x03) | opcode;
|
|
}
|
|
byte DCC::cv2(int cv) {
|
|
cv--;
|
|
return lowByte(cv);
|
|
}
|
|
|
|
|
|
|
|
void DCC::updateLocoReminder(int loco, byte speedCode) {
|
|
int reg;
|
|
|
|
if (loco==0) {
|
|
// broadcast message
|
|
for (reg = 0; reg < MAX_LOCOS; reg++) speedTable[reg].speedCode = speedCode;
|
|
return;
|
|
}
|
|
|
|
// determine speed reg for this loco
|
|
int firstEmpty = MAX_LOCOS;
|
|
for (reg = 0; reg < MAX_LOCOS; reg++) {
|
|
if (speedTable[reg].loco == loco) break;
|
|
if (speedTable[reg].loco == 0 && firstEmpty == MAX_LOCOS) firstEmpty = reg;
|
|
}
|
|
if (reg == MAX_LOCOS) reg = firstEmpty;
|
|
if (reg >= MAX_LOCOS) {
|
|
DIAG(F("\nToo many locos\n"));
|
|
return;
|
|
}
|
|
speedTable[reg].loco = loco;
|
|
speedTable[reg].speedCode = speedCode;
|
|
}
|
|
|
|
DCC::LOCO DCC::speedTable[MAX_LOCOS];
|
|
int DCC::nextLoco = 0;
|
|
|
|
//ACK MANAGER
|
|
ackOp const * DCC::ackManagerProg;
|
|
byte DCC::ackManagerByte;
|
|
byte DCC::ackManagerStash;
|
|
int DCC::ackManagerCv;
|
|
byte DCC::ackManagerBitNum;
|
|
bool DCC::ackReceived;
|
|
int DCC::ackTriggerMilliamps;
|
|
unsigned long DCC::ackPulseStart;
|
|
|
|
ACK_CALLBACK DCC::ackManagerCallback;
|
|
|
|
void DCC::ackManagerSetup(int cv, byte byteValueOrBitnum, ackOp const program[], ACK_CALLBACK callback) {
|
|
ackManagerCv = cv;
|
|
ackManagerProg = program;
|
|
ackManagerByte = byteValueOrBitnum;
|
|
ackManagerBitNum=byteValueOrBitnum;
|
|
ackManagerCallback = callback;
|
|
|
|
}
|
|
|
|
const byte RESET_MIN=8; // tuning of reset counter before sending message
|
|
|
|
void DCC::ackManagerLoop() {
|
|
while (ackManagerProg) {
|
|
|
|
// breaks from this switch will step to next prog entry
|
|
// returns from this switch will stay on same entry (typically WACK waiting and when all finished.)
|
|
byte opcode=pgm_read_byte_near(ackManagerProg);
|
|
// DIAG(F("apAck %d\n"),opcode);
|
|
int resets=DCCWaveform::progTrack.sentResetsSincePacket;
|
|
int current;
|
|
|
|
switch (opcode) {
|
|
case BASELINE:
|
|
if (resets<RESET_MIN) return; // try later
|
|
ackTriggerMilliamps=Hardware::getCurrentMilliamps(false) + ACK_MIN_PULSE;
|
|
// DIAG(F("\nBASELINE trigger mA=%d\n"),ackTriggerMilliamps);
|
|
break;
|
|
|
|
case W0: // write 0 bit
|
|
case W1: // write 1 bit
|
|
{
|
|
if (resets<RESET_MIN) return; // try later
|
|
byte instruction = WRITE_BIT | (opcode==W1 ? BIT_ON : BIT_OFF) | ackManagerBitNum;
|
|
byte message[] = {cv1(BIT_MANIPULATE, ackManagerCv), cv2(ackManagerCv), instruction };
|
|
DCCWaveform::progTrack.schedulePacket(message, sizeof(message), 6);
|
|
ackPulseStart=0;
|
|
}
|
|
break;
|
|
|
|
case WB: // write byte
|
|
{
|
|
if (resets<RESET_MIN) return; // try later
|
|
byte message[] = {cv1(WRITE_BYTE, ackManagerCv), cv2(ackManagerCv), ackManagerByte};
|
|
DCCWaveform::progTrack.schedulePacket(message, sizeof(message), 6);
|
|
ackPulseStart=0;
|
|
}
|
|
break;
|
|
|
|
case VB: // Issue validate Byte packet
|
|
{
|
|
if (resets<RESET_MIN) return; // try later
|
|
// DIAG(F("\nVB %d %d"),ackManagerCv,ackManagerByte);
|
|
byte message[] = { cv1(VERIFY_BYTE, ackManagerCv), cv2(ackManagerCv), ackManagerByte};
|
|
DCCWaveform::progTrack.schedulePacket(message, sizeof(message), 5);
|
|
ackPulseStart=0;
|
|
}
|
|
break;
|
|
|
|
case V0:
|
|
case V1: // Issue validate bit=0 or bit=1 packet
|
|
{
|
|
if (resets<RESET_MIN) return; // try later
|
|
// DIAG(F("V%d cv=%d bit=%d"),opcode==V1, ackManagerCv,ackManagerBitNum);
|
|
byte instruction = VERIFY_BIT | (opcode==V0?BIT_OFF:BIT_ON) | ackManagerBitNum;
|
|
byte message[] = {cv1(BIT_MANIPULATE, ackManagerCv), cv2(ackManagerCv), instruction };
|
|
DCCWaveform::progTrack.schedulePacket(message, sizeof(message), 5);
|
|
ackPulseStart=0;
|
|
}
|
|
break;
|
|
|
|
case WACK: // wait for ack (or absence of ack)
|
|
|
|
if (resets > 6) { //ACK timeout
|
|
// DIAG(F("\nWACK fail %d\n"), resets);
|
|
ackReceived = false;
|
|
break; // move on to next prog step
|
|
}
|
|
|
|
current=Hardware::getCurrentMilliamps(false);
|
|
// An ACK is a pulse lasting between 4.5 and 8.5 mSecs (refer @haba)
|
|
|
|
if (current>ackTriggerMilliamps) {
|
|
if (ackPulseStart==0)ackPulseStart=micros(); // leading edge of pulse detected
|
|
return;
|
|
}
|
|
|
|
// not in pulse
|
|
if (ackPulseStart==0) return; // keep waiting for leading edge
|
|
{ // detected trailing edge of pulse
|
|
long pulseDuration=micros()-ackPulseStart;
|
|
if (pulseDuration>4500 && pulseDuration<8000) {
|
|
ackReceived=true;
|
|
DCCWaveform::progTrack.killRemainingRepeats(); // probably no need after 8.5ms!!
|
|
break; // we have a genuine ACK result
|
|
}
|
|
}
|
|
ackPulseStart=0; // We have detected a too-short or too-long pulse so ignore and wait for next leading edge
|
|
return; // keep waiting
|
|
|
|
case ITC0:
|
|
case ITC1: // If True Callback(0 or 1) (if prevous WACK got an ACK)
|
|
if (ackReceived) {
|
|
ackManagerProg = NULL; // all done now
|
|
(ackManagerCallback)(opcode==ITC0?0:1);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case ITCB: // If True callback(byte)
|
|
if (ackReceived) {
|
|
ackManagerProg = NULL; // all done now
|
|
(ackManagerCallback)(ackManagerByte);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case NAKFAIL: // If nack callback(-1)
|
|
if (!ackReceived) {
|
|
ackManagerProg = NULL; // all done now
|
|
(ackManagerCallback)(-1);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case FAIL: // callback(-1)
|
|
ackManagerProg = NULL;
|
|
(ackManagerCallback)(-1);
|
|
return;
|
|
|
|
case STARTMERGE:
|
|
ackManagerBitNum=7;
|
|
ackManagerByte=0;
|
|
break;
|
|
|
|
case MERGE: // Merge previous Validate zero wack response with byte value and update bit number (use for reading CV bytes)
|
|
ackManagerByte <<= 1;
|
|
// ackReceived means bit is zero.
|
|
if (!ackReceived) ackManagerByte |= 1;
|
|
ackManagerBitNum--;
|
|
break;
|
|
|
|
case SETBIT:
|
|
ackManagerProg++;
|
|
ackManagerBitNum=pgm_read_byte_near(ackManagerProg);
|
|
break;
|
|
|
|
case SETCV:
|
|
ackManagerProg++;
|
|
ackManagerCv=pgm_read_byte_near(ackManagerProg);
|
|
break;
|
|
|
|
case STASHLOCOID:
|
|
ackManagerStash=ackManagerByte; // stash value from CV17
|
|
break;
|
|
|
|
case COMBINELOCOID:
|
|
// ackManagerStash is cv17, ackManagerByte is CV 18
|
|
ackManagerProg=NULL;
|
|
(ackManagerCallback)( ackManagerByte + ((ackManagerStash - 192) << 8));
|
|
return;
|
|
|
|
case ITSKIP:
|
|
if (!ackReceived) break;
|
|
// SKIP opcodes until SKIPTARGET found
|
|
while (opcode!=SKIPTARGET) {
|
|
ackManagerProg++;
|
|
opcode=pgm_read_byte_near(ackManagerProg);
|
|
}
|
|
// DIAG(F("\nSKIPTARGET located\n"));
|
|
break;
|
|
case SKIPTARGET:
|
|
break;
|
|
default:
|
|
// DIAG(F("!! ackOp %d FAULT!!"),opcode);
|
|
ackManagerProg=NULL;
|
|
(ackManagerCallback)( -1);
|
|
return;
|
|
|
|
} // end of switch
|
|
ackManagerProg++;
|
|
}
|
|
}
|