mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-23 12:51:24 +01:00
193 lines
7.5 KiB
C++
193 lines
7.5 KiB
C++
/*
|
|
* © 2023, Peter Cole. All rights reserved.
|
|
* © 2022, Peter Cole. All rights reserved.
|
|
*
|
|
* This file is part of EX-CommandStation
|
|
*
|
|
* This is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* It is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* The IO_RotaryEncoder device driver is used to receive positions from a rotary encoder connected to an Arduino via I2C.
|
|
*
|
|
* There is separate code required for the Arduino the rotary encoder is connected to, which is located here:
|
|
* https://github.com/peteGSX-Projects/dcc-ex-rotary-encoder
|
|
*
|
|
* This device driver receives the rotary encoder position when the rotary encoder button is pushed, and these positions
|
|
* can be tested in EX-RAIL with:
|
|
* ONCHANGE(vpin) - flag when the rotary encoder position has changed from the previous position
|
|
* IFRE(vpin, position) - test to see if specified rotary encoder position has been received
|
|
*
|
|
* Feedback can also be sent to the rotary encoder by using 2 Vpins, and sending a SET()/RESET() to the second Vpin.
|
|
* A SET(vpin) will flag that a turntable (or anything else) is in motion, and a RESET(vpin) that the motion has finished.
|
|
*
|
|
* In addition, defining a third Vpin will allow a position number to be sent so that when an EXRAIL automation or some other
|
|
* activity has moved a turntable, the position can be reflected in the rotary encoder software. This can be accomplished
|
|
* using the EXRAIL SERVO(vpin, position, profile) command, where:
|
|
* - vpin = the third defined Vpin (any other is ignored)
|
|
* - position = the defined position in the DCC-EX Rotary Encoder software, 0 (Home) to 255
|
|
* - profile = Must be defined as per the SERVO() command, but is ignored as it has no relevance
|
|
*
|
|
* Defining in myAutomation.h requires the device driver to be included in addition to the HAL() statement. Examples:
|
|
*
|
|
* #include "IO_RotaryEncoder.h"
|
|
* HAL(RotaryEncoder, 700, 1, 0x67) // Define single Vpin, no feedback or position sent to rotary encoder software
|
|
* HAL(RotaryEncoder, 700, 2, 0x67) // Define two Vpins, feedback only sent to rotary encoder software
|
|
* HAL(RotaryEncoder, 700, 3, 0x67) // Define three Vpins, can send feedback and position update to rotary encoder software
|
|
*
|
|
* Refer to the documentation for further information including the valid activities and examples.
|
|
*/
|
|
|
|
#ifndef IO_ROTARYENCODER_H
|
|
#define IO_ROTARYENCODER_H
|
|
|
|
#include "EXRAIL2.h"
|
|
#include "IODevice.h"
|
|
#include "I2CManager.h"
|
|
#include "DIAG.h"
|
|
|
|
class RotaryEncoder : public IODevice {
|
|
public:
|
|
|
|
static void create(VPIN firstVpin, int nPins, I2CAddress i2cAddress) {
|
|
if (checkNoOverlap(firstVpin, nPins, i2cAddress)) new RotaryEncoder(firstVpin, nPins, i2cAddress);
|
|
}
|
|
|
|
private:
|
|
// Constructor
|
|
RotaryEncoder(VPIN firstVpin, int nPins, I2CAddress i2cAddress){
|
|
_firstVpin = firstVpin;
|
|
_nPins = nPins;
|
|
if (_nPins > 3) {
|
|
_nPins = 3;
|
|
DIAG(F("RotaryEncoder WARNING:%d vpins defined, only 3 supported"), _nPins);
|
|
}
|
|
_I2CAddress = i2cAddress;
|
|
addDevice(this);
|
|
}
|
|
|
|
// Initiate the device
|
|
void _begin() {
|
|
uint8_t _status;
|
|
// Attempt to initilalise device
|
|
I2CManager.begin();
|
|
if (I2CManager.exists(_I2CAddress)) {
|
|
// Send RE_RDY, must receive RE_RDY to be online
|
|
_sendBuffer[0] = RE_RDY;
|
|
_status = I2CManager.read(_I2CAddress, _rcvBuffer, 1, _sendBuffer, 1);
|
|
if (_status == I2C_STATUS_OK) {
|
|
if (_rcvBuffer[0] == RE_RDY) {
|
|
_sendBuffer[0] = RE_VER;
|
|
if (I2CManager.read(_I2CAddress, _versionBuffer, 3, _sendBuffer, 1) == I2C_STATUS_OK) {
|
|
_majorVer = _versionBuffer[0];
|
|
_minorVer = _versionBuffer[1];
|
|
_patchVer = _versionBuffer[2];
|
|
}
|
|
} else {
|
|
DIAG(F("RotaryEncoder I2C:%s garbage received: %d"), _I2CAddress.toString(), _rcvBuffer[0]);
|
|
_deviceState = DEVSTATE_FAILED;
|
|
return;
|
|
}
|
|
} else {
|
|
DIAG(F("RotaryEncoder I2C:%s ERROR connecting"), _I2CAddress.toString());
|
|
_deviceState = DEVSTATE_FAILED;
|
|
return;
|
|
}
|
|
#ifdef DIAG_IO
|
|
_display();
|
|
#endif
|
|
} else {
|
|
DIAG(F("RotaryEncoder I2C:%s device not found"), _I2CAddress.toString());
|
|
_deviceState = DEVSTATE_FAILED;
|
|
}
|
|
}
|
|
|
|
void _loop(unsigned long currentMicros) override {
|
|
if (_deviceState == DEVSTATE_FAILED) return; // Return if device has failed
|
|
if (_i2crb.isBusy()) return; // Return if I2C operation still in progress
|
|
|
|
if (currentMicros - _lastPositionRead > _positionRefresh) {
|
|
_lastPositionRead = currentMicros;
|
|
_sendBuffer[0] = RE_READ;
|
|
I2CManager.read(_I2CAddress, _rcvBuffer, 1, _sendBuffer, 1, &_i2crb); // Read position from encoder
|
|
_position = _rcvBuffer[0];
|
|
// If EXRAIL is active, we need to trigger the ONCHANGE() event handler if it's in use
|
|
#if defined(EXRAIL_ACTIVE)
|
|
if (_position != _previousPosition) {
|
|
_previousPosition = _position;
|
|
RMFT2::changeEvent(_firstVpin, 1);
|
|
} else {
|
|
RMFT2::changeEvent(_firstVpin, 0);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
// Return the position sent by the rotary encoder software
|
|
int _readAnalogue(VPIN vpin) override {
|
|
if (_deviceState == DEVSTATE_FAILED) return 0;
|
|
return _position;
|
|
}
|
|
|
|
// Send the feedback value to the rotary encoder software
|
|
void _write(VPIN vpin, int value) override {
|
|
if (vpin == _firstVpin + 1) {
|
|
if (value != 0) value = 0x01;
|
|
byte _feedbackBuffer[2] = {RE_OP, (byte)value};
|
|
I2CManager.write(_I2CAddress, _feedbackBuffer, 2);
|
|
}
|
|
}
|
|
|
|
// Send a position update to the rotary encoder software
|
|
// To be valid, must be 0 to 255, and different to the current position
|
|
// If the current position is the same, it was initiated by the rotary encoder
|
|
void _writeAnalogue(VPIN vpin, int position, uint8_t profile, uint16_t duration) override {
|
|
if (vpin == _firstVpin + 2) {
|
|
if (position >= 0 && position <= 255 && position != _position) {
|
|
byte newPosition = position & 0xFF;
|
|
byte _positionBuffer[2] = {RE_MOVE, newPosition};
|
|
I2CManager.write(_I2CAddress, _positionBuffer, 2);
|
|
}
|
|
}
|
|
}
|
|
|
|
void _display() override {
|
|
DIAG(F("Rotary Encoder I2C:%s v%d.%d.%d Configured on VPIN:%u-%d %S"), _I2CAddress.toString(), _majorVer, _minorVer, _patchVer,
|
|
(int)_firstVpin, _firstVpin+_nPins-1, (_deviceState==DEVSTATE_FAILED) ? F("OFFLINE") : F(""));
|
|
}
|
|
|
|
int8_t _position;
|
|
int8_t _previousPosition = 0;
|
|
uint8_t _versionBuffer[3];
|
|
uint8_t _sendBuffer[1];
|
|
uint8_t _rcvBuffer[1];
|
|
uint8_t _majorVer = 0;
|
|
uint8_t _minorVer = 0;
|
|
uint8_t _patchVer = 0;
|
|
I2CRB _i2crb;
|
|
unsigned long _lastPositionRead = 0;
|
|
const unsigned long _positionRefresh = 100000UL; // Delay refreshing position for 100ms
|
|
|
|
enum {
|
|
RE_RDY = 0xA0, // Flag to check if encoder is ready for operation
|
|
RE_VER = 0xA1, // Flag to retrieve rotary encoder software version
|
|
RE_READ = 0xA2, // Flag to read the current position of the encoder
|
|
RE_OP = 0xA3, // Flag for operation start/end, sent to when sending feedback on move start/end
|
|
RE_MOVE = 0xA4, // Flag for sending a position update from the device driver to the encoder
|
|
};
|
|
|
|
};
|
|
|
|
#endif
|