mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-11-26 17:46:14 +01:00
91 lines
3.4 KiB
C++
91 lines
3.4 KiB
C++
/*
|
|
* © 2022 Paul M Antoine
|
|
* © 2021 Mike S
|
|
* © 2021 Harald Barth
|
|
* © 2021 Fred Decker
|
|
* All rights reserved.
|
|
*
|
|
* This file is part of CommandStation-EX
|
|
*
|
|
* This is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* It is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/* There are several different implementations of this class which the compiler will select
|
|
according to the hardware.
|
|
*/
|
|
|
|
/* This timer class is used to manage the single timer required to handle the DCC waveform.
|
|
* All timer access comes through this class so that it can be compiled for
|
|
* various hardware CPU types.
|
|
*
|
|
* DCCEX works on a single timer interrupt at a regular 58uS interval.
|
|
* The DCCWaveform class generates the signals to the motor shield
|
|
* based on this timer.
|
|
*
|
|
* If the motor drivers are BOTH configured to use the correct 2 pins for the architecture,
|
|
* (see isPWMPin() function. )
|
|
* then this allows us to use a hardware driven pin switching arrangement which is
|
|
* achieved by setting the duty cycle of the NEXT clock interrupt to 0% or 100% depending on
|
|
* the required pin state. (see setPWM())
|
|
* This is more accurate than the software interrupt but at the expense of
|
|
* limiting the choice of available pins.
|
|
* Fortunately, a standard motor shield on a Mega uses pins that qualify for PWM...
|
|
* Other shields may be jumpered to PWM pins or run directly using the software interrupt.
|
|
*
|
|
* Because the PWM-based waveform is effectively set half a cycle after the software version,
|
|
* it is not acceptable to drive the two tracks on different methiods or it would cause
|
|
* problems for <1 JOIN> etc.
|
|
*
|
|
*/
|
|
|
|
#ifndef DCCTimer_h
|
|
#define DCCTimer_h
|
|
#include "Arduino.h"
|
|
|
|
typedef void (*INTERRUPT_CALLBACK)();
|
|
|
|
class DCCTimer {
|
|
public:
|
|
static void begin(INTERRUPT_CALLBACK interrupt);
|
|
static void getSimulatedMacAddress(byte mac[6]);
|
|
static bool isPWMPin(byte pin);
|
|
static void setPWM(byte pin, bool high);
|
|
static void clearPWM();
|
|
// Update low ram level. Allow for extra bytes to be specified
|
|
// by estimation or inspection, that may be used by other
|
|
// called subroutines. Must be called with interrupts disabled.
|
|
//
|
|
// Although __brkval may go up and down as heap memory is allocated
|
|
// and freed, this function records only the worst case encountered.
|
|
// So even if all of the heap is freed, the reported minimum free
|
|
// memory will not increase.
|
|
//
|
|
static void inline updateMinimumFreeMemoryISR(unsigned char extraBytes=0) {
|
|
int spare = freeMemory()-extraBytes;
|
|
if (spare < 0) spare = 0;
|
|
if (spare < minimum_free_memory) minimum_free_memory = spare;
|
|
}
|
|
|
|
static int getMinimumFreeMemory();
|
|
|
|
private:
|
|
static int freeMemory();
|
|
static volatile int minimum_free_memory;
|
|
static const int DCC_SIGNAL_TIME=58; // this is the 58uS DCC 1-bit waveform half-cycle
|
|
static const long CLOCK_CYCLES=(F_CPU / 1000000 * DCC_SIGNAL_TIME) >>1;
|
|
|
|
};
|
|
|
|
#endif
|