1
0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-23 12:51:24 +01:00
CommandStation-EX/MotorDriver.h

117 lines
3.9 KiB
C++

/*
* © 2021 Mike S
* © 2021 Fred Decker
* © 2020 Chris Harlow
* All rights reserved.
*
* This file is part of Asbelos DCC API
*
* This is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* It is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*/
#ifndef MotorDriver_h
#define MotorDriver_h
#include "FSH.h"
#include "IODevice.h"
// Virtualised Motor shield 1-track hardware Interface
#ifndef UNUSED_PIN // sync define with the one in MotorDrivers.h
#define UNUSED_PIN 127 // inside int8_t
#endif
#if defined(__IMXRT1062__) || defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_ESP32)
struct FASTPIN {
volatile uint32_t *inout;
uint32_t maskHIGH;
uint32_t maskLOW;
};
#else
struct FASTPIN {
volatile uint8_t *inout;
uint8_t maskHIGH;
uint8_t maskLOW;
};
#endif
enum class POWERMODE : byte { OFF, ON, OVERLOAD };
class MotorDriver {
public:
MotorDriver(VPIN power_pin, byte signal_pin, byte signal_pin2, int8_t brake_pin,
byte current_pin, float senseFactor, unsigned int tripMilliamps, byte faultPin);
virtual void setPower( POWERMODE mode);
virtual POWERMODE getPower() { return powerMode;}
virtual void setSignal( bool high);
virtual void setBrake( bool on);
virtual void setDCSignal(byte speedByte);
virtual int getCurrentRaw();
virtual int getCurrentRawInInterrupt();
virtual unsigned int raw2mA( int raw);
virtual int mA2raw( unsigned int mA);
inline bool canBrake() {
return brakePin!=UNUSED_PIN;
}
inline int getRawCurrentTripValue() {
return rawCurrentTripValue;
}
bool isPWMCapable();
bool canMeasureCurrent();
static bool usePWM;
static bool commonFaultPin; // This is a stupid motor shield which has only a common fault pin for both outputs
inline byte getFaultPin() {
return faultPin;
}
inline void setResetCounterPointer(byte *bp) { // load resetPacketCounter pointer
resetsCounterP = bp;
}
void checkPowerOverload(bool useProgLimit, byte trackno);
private:
byte *resetsCounterP = NULL; // points to the resetPacketCounter if this is a prog track
void getFastPin(const FSH* type,int pin, bool input, FASTPIN & result);
void getFastPin(const FSH* type,int pin, FASTPIN & result) {
getFastPin(type, pin, 0, result);
}
VPIN powerPin;
byte signalPin, signalPin2, currentPin, faultPin, brakePin;
FASTPIN fastSignalPin, fastSignalPin2, fastBrakePin,fastFaultPin;
bool dualSignal; // true to use signalPin2
bool invertBrake; // brake pin passed as negative means pin is inverted
float senseFactor;
int senseOffset;
unsigned int tripMilliamps;
int rawCurrentTripValue;
// current sampling
POWERMODE powerMode;
unsigned long lastSampleTaken;
unsigned int sampleDelay;
int progTripValue;
int lastCurrent;
int maxmA;
int tripmA;
// Wait times for power management. Unit: milliseconds
static const int POWER_SAMPLE_ON_WAIT = 100;
static const int POWER_SAMPLE_OFF_WAIT = 1000;
static const int POWER_SAMPLE_OVERLOAD_WAIT = 20;
// Trip current for programming track, 250mA. Change only if you really
// need to be non-NMRA-compliant because of decoders that are not either.
static const int TRIP_CURRENT_PROG=250;
unsigned long power_sample_overload_wait = POWER_SAMPLE_OVERLOAD_WAIT;
unsigned int power_good_counter = 0;
};
#endif