mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-11-27 10:06:13 +01:00
131 lines
4.0 KiB
C++
131 lines
4.0 KiB
C++
/*
|
|
* © 2021, Neil McKechnie. All rights reserved.
|
|
*
|
|
* This file is part of DCC++EX API
|
|
*
|
|
* This is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* It is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* Ethernet (W5100,W5200,W5500) default mode of operation:
|
|
*
|
|
* All transmissions are sent with MAC address allOnes, i.e.
|
|
* as a broadcast. Regular sensor state updates are broadcast anyway,
|
|
* and other write/writeAnalogue command packets are relatively
|
|
* infrequent.
|
|
*
|
|
* Usage:
|
|
* Net_Ethernet *etherDriver = new Net_Ethernet(10);
|
|
* Network<Net_Ethernet>::create(4000, NUMREMOTEPINS(rpins), 1, rpins, etherDriver);
|
|
*
|
|
* The W5x00 device has to be connected to the hardware MISO, MOSI, SCK and CS pins of the
|
|
* microcontroller. The CS pin is specified in the command above (e.g. 10).
|
|
* For details of the Network class configuration, see IO_Network.h.
|
|
*
|
|
*/
|
|
|
|
#ifndef NET_ETHERNET_H
|
|
#define NET_ETHERNET_H
|
|
|
|
#include "IO_Network.h"
|
|
#include "DIAG.h"
|
|
#include "Ethernet.h"
|
|
#include "EthernetUdp.h"
|
|
|
|
class Net_Ethernet {
|
|
|
|
private:
|
|
// pins must be arduino GPIO pins, not extender pins or HAL pins.
|
|
int _csPin;
|
|
// Number of the current node (1-254)
|
|
uint8_t _thisNode;
|
|
// 4-byte IP address. Last byte will contain the node number (1-254) or 255 for broadcast.
|
|
byte _ipAddress[4] = {192,168,1,0};
|
|
const uint16_t _port = 8900;
|
|
uint8_t _packetBytesAvailable;
|
|
EthernetUDP udp;
|
|
|
|
public:
|
|
// Constructor performs static initialisation of the device object
|
|
Net_Ethernet () {
|
|
_csPin = 10; // The Ethernet driver doesn't allow CS pin to be selected.
|
|
_packetBytesAvailable = 0;
|
|
}
|
|
|
|
// Perform dynamic initialisation of the device
|
|
bool begin(uint8_t thisNode) {
|
|
_thisNode = thisNode;
|
|
if (Ethernet.hardwareStatus() != EthernetNoHardware) {
|
|
// // Set IP address.
|
|
// _ipAddress[3] = thisNode;
|
|
// Ethernet.setLocalIP(_ipAddress);
|
|
// _ipAddress[3] = 254;
|
|
// Ethernet.setGatewayIP(_ipAddress);
|
|
// IPAddress mask = IPAddress(255,255,255,0);
|
|
// Ethernet.setSubnetMask(mask);
|
|
// Begin listening on receive port
|
|
udp.begin(_port);
|
|
return true;
|
|
} else {
|
|
DIAG(F("Ethernet (W5x00) no hardware found"));
|
|
return false;
|
|
}
|
|
}
|
|
|
|
// The following function should be called regularly to handle incoming packets.
|
|
// Check if there is a received packet ready for reading.
|
|
bool available() {
|
|
uint16_t packetLen = udp.parsePacket();
|
|
|
|
if (packetLen > 0) {
|
|
// Packet received.
|
|
_packetBytesAvailable = packetLen;
|
|
return true;
|
|
}
|
|
_packetBytesAvailable = 0;
|
|
return false;
|
|
}
|
|
|
|
// Read packet from the ethernet buffer, and return the number of bytes
|
|
// that were read.
|
|
uint8_t read(uint8_t buffer[], uint8_t bufferSize) {
|
|
uint8_t bytesReceived = _packetBytesAvailable;
|
|
// Clear packet byte marker
|
|
_packetBytesAvailable = 0;
|
|
if (bytesReceived > 0) {
|
|
//DIAG(F("ReadPacket(%d)"), bytesReceived);
|
|
// Check if there's room for the data
|
|
if (bufferSize >= bytesReceived) {
|
|
return udp.read(buffer, bytesReceived);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
// Wrapper functions for Ethernet UDP write function.
|
|
// Since we don't know the IP address of the node, just broadcast
|
|
// over the subnet.
|
|
bool sendCommand(uint8_t node, const uint8_t buffer[], uint8_t len) {
|
|
_ipAddress[3] = 255;
|
|
udp.beginPacket(_ipAddress, _port);
|
|
udp.write(buffer, len);
|
|
udp.endPacket();
|
|
return true;
|
|
}
|
|
|
|
void loop() { }
|
|
|
|
};
|
|
|
|
#endif //NET_ETHERNET_H
|