dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-11-23 08:06:13 +01:00
Code Releases Activity
c45337d5d4
CommandStation-EX/I2CManager_AVR.h

199 lines
8.4 KiB
C
Raw Blame History

/*
* © 2021, Neil McKechnie. All rights reserved.
*
* This file is part of CommandStation-EX
*
* This is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* It is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*/
#ifndef I2CMANAGER_AVR_H
#define I2CMANAGER_AVR_H
#include <Arduino.h>
#include "I2CManager.h"
#include <avr/io.h>
#include <avr/interrupt.h>
/****************************************************************************
TWI State codes
****************************************************************************/
// General TWI Master staus codes
#define TWI_START 0x08 // START has been transmitted
#define TWI_REP_START 0x10 // Repeated START has been transmitted
#define TWI_ARB_LOST 0x38 // Arbitration lost
// TWI Master Transmitter staus codes
#define TWI_MTX_ADR_ACK 0x18 // SLA+W has been tramsmitted and ACK received
#define TWI_MTX_ADR_NACK 0x20 // SLA+W has been tramsmitted and NACK received
#define TWI_MTX_DATA_ACK 0x28 // Data byte has been tramsmitted and ACK received
#define TWI_MTX_DATA_NACK 0x30 // Data byte has been tramsmitted and NACK received
// TWI Master Receiver staus codes
#define TWI_MRX_ADR_ACK 0x40 // SLA+R has been tramsmitted and ACK received
#define TWI_MRX_ADR_NACK 0x48 // SLA+R has been tramsmitted and NACK received
#define TWI_MRX_DATA_ACK 0x50 // Data byte has been received and ACK tramsmitted
#define TWI_MRX_DATA_NACK 0x58 // Data byte has been received and NACK tramsmitted
// TWI Miscellaneous status codes
#define TWI_NO_STATE 0xF8 // No relevant state information available
#define TWI_BUS_ERROR 0x00 // Bus error due to an illegal START or STOP condition
#define TWI_TWBR ((F_CPU / I2C_FREQ) - 16) / 2 // TWI Bit rate Register setting.
#if defined(I2C_USE_INTERRUPTS)
#define ENABLE_TWI_INTERRUPT (1<<TWIE)
#else
#define ENABLE_TWI_INTERRUPT 0
#endif
/***************************************************************************
* Set I2C clock speed register.
***************************************************************************/
void I2CManagerClass::I2C_setClock(unsigned long i2cClockSpeed) {
TWBR = ((F_CPU / i2cClockSpeed) - 16) / 2;
}
/***************************************************************************
* Initialise I2C registers.
***************************************************************************/
void I2CManagerClass::I2C_init()
{
TWSR = 0;
TWBR = TWI_TWBR; // Set bit rate register (Baudrate). Defined in header file.
TWDR = 0xFF; // Default content = SDA released.
TWCR = (1<<TWINT); // Clear interrupt flag
pinMode(SDA, INPUT_PULLUP);
pinMode(SCL, INPUT_PULLUP);
}
/***************************************************************************
* Initiate a start bit for transmission.
***************************************************************************/
void I2CManagerClass::I2C_sendStart() {
bytesToSend = currentRequest->writeLen;
bytesToReceive = currentRequest->readLen;
// We may have initiated a stop bit before this without waiting for it.
// Wait for stop bit to be sent before sending start.
while (TWCR & (1<<TWSTO)) {}
TWCR = (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT)|(1<<TWEA)|(1<<TWSTA); // Send Start
}
/***************************************************************************
* Initiate a stop bit for transmission (does not interrupt)
***************************************************************************/
void I2CManagerClass::I2C_sendStop() {
TWDR = 0xff; // Default condition = SDA released
TWCR = (1<<TWEN)|(1<<TWINT)|(1<<TWEA)|(1<<TWSTO); // Send Stop
}
/***************************************************************************
* Close I2C down
***************************************************************************/
void I2CManagerClass::I2C_close() {
// disable TWI
I2C_sendStop();
while (TWCR & (1<<TWSTO)) {}
TWCR = (1<<TWINT); // clear any interrupt and stop twi.
}
/***************************************************************************
* Main state machine for I2C, called from interrupt handler or,
* if I2C_USE_INTERRUPTS isn't defined, from the I2CManagerClass::loop() function
* (and therefore, indirectly, from I2CRB::wait() and I2CRB::isBusy()).
***************************************************************************/
void I2CManagerClass::I2C_handleInterrupt() {
if (!(TWCR & (1<<TWINT))) return; // Nothing to do.
uint8_t twsr = TWSR & 0xF8;
// Cases are ordered so that the most frequently used ones are tested first.
switch (twsr) {
case TWI_MTX_DATA_ACK: // Data byte has been transmitted and ACK received
case TWI_MTX_ADR_ACK: // SLA+W has been transmitted and ACK received
if (bytesToSend) { // Send first.
if (operation == OPERATION_SEND_P)
TWDR = GETFLASH(currentRequest->writeBuffer + (txCount++));
else
TWDR = currentRequest->writeBuffer[txCount++];
bytesToSend--;
TWCR = (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT)|(1<<TWEA);
} else if (bytesToReceive) { // All sent, anything to receive?
while (TWCR & (1<<TWSTO)) {} // Wait for stop to be sent
TWCR = (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT)|(1<<TWEA)|(1<<TWSTA); // Send Start
} else { // Nothing left to send or receive
TWDR = 0xff; // Default condition = SDA released
TWCR = (1<<TWEN)|(1<<TWINT)|(1<<TWEA)|(1<<TWSTO); // Send Stop
status = I2C_STATUS_OK;
}
break;
case TWI_MRX_DATA_ACK: // Data byte has been received and ACK transmitted
if (bytesToReceive > 0) {
currentRequest->readBuffer[rxCount++] = TWDR;
bytesToReceive--;
}
/* fallthrough */
case TWI_MRX_ADR_ACK: // SLA+R has been sent and ACK received
if (bytesToReceive <= 1) {
TWCR = (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT); // Send NACK after next reception
} else {
// send ack
TWCR = (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT)|(1<<TWEA);
}
break;
case TWI_MRX_DATA_NACK: // Data byte has been received and NACK transmitted
if (bytesToReceive > 0) {
currentRequest->readBuffer[rxCount++] = TWDR;
bytesToReceive--;
}
TWCR = (1<<TWEN)|(1<<TWINT)|(1<<TWEA)|(1<<TWSTO); // Send Stop
status = I2C_STATUS_OK;
break;
case TWI_START: // START has been transmitted
case TWI_REP_START: // Repeated START has been transmitted
// Set up address and R/W
if (operation == OPERATION_READ || (operation==OPERATION_REQUEST && !bytesToSend))
TWDR = (currentRequest->i2cAddress << 1) | 1; // SLA+R
else
TWDR = (currentRequest->i2cAddress << 1) | 0; // SLA+W
TWCR = (1<<TWEN)|ENABLE_TWI_INTERRUPT|(1<<TWINT)|(1<<TWEA);
break;
case TWI_MTX_ADR_NACK: // SLA+W has been transmitted and NACK received
case TWI_MRX_ADR_NACK: // SLA+R has been transmitted and NACK received
case TWI_MTX_DATA_NACK: // Data byte has been transmitted and NACK received
TWDR = 0xff; // Default condition = SDA released
TWCR = (1<<TWEN)|(1<<TWINT)|(1<<TWEA)|(1<<TWSTO); // Send Stop
status = I2C_STATUS_NEGATIVE_ACKNOWLEDGE;
break;
case TWI_ARB_LOST: // Arbitration lost
// Restart transaction from start.
I2C_sendStart();
break;
case TWI_BUS_ERROR: // Bus error due to an illegal START or STOP condition
default:
TWDR = 0xff; // Default condition = SDA released
TWCR = (1<<TWEN)|(1<<TWINT)|(1<<TWEA)|(1<<TWSTO); // Send Stop
status = I2C_STATUS_TRANSMIT_ERROR;
}
}
#if defined(I2C_USE_INTERRUPTS)
ISR(TWI_vect) {
I2CManagerClass::handleInterrupt();
}
#endif
#endif /* I2CMANAGER_AVR_H */
View Git Blame Copy Permalink