mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-11-27 01:56:14 +01:00
118 lines
4.0 KiB
C++
118 lines
4.0 KiB
C++
/*
|
|
* © 2021 Mike S
|
|
* © 2021 Harald Barth
|
|
* © 2021 Fred Decker
|
|
* © 2021 Chris Harlow
|
|
* © 2021 David Cutting
|
|
* All rights reserved.
|
|
*
|
|
* This file is part of Asbelos DCC API
|
|
*
|
|
* This is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* It is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
|
|
/* This timer class is used to manage the single timer required to handle the DCC waveform.
|
|
* All timer access comes through this class so that it can be compiled for
|
|
* various hardware CPU types.
|
|
*
|
|
* DCCEX works on a single timer interrupt at a regular 58uS interval.
|
|
* The DCCWaveform class generates the signals to the motor shield
|
|
* based on this timer.
|
|
*
|
|
* If the motor drivers are BOTH configured to use the correct 2 pins for the architecture,
|
|
* (see isPWMPin() function. )
|
|
* then this allows us to use a hardware driven pin switching arrangement which is
|
|
* achieved by setting the duty cycle of the NEXT clock interrupt to 0% or 100% depending on
|
|
* the required pin state. (see setPWM())
|
|
* This is more accurate than the software interrupt but at the expense of
|
|
* limiting the choice of available pins.
|
|
* Fortunately, a standard motor shield on a Mega uses pins that qualify for PWM...
|
|
* Other shields may be jumpered to PWM pins or run directly using the software interrupt.
|
|
*
|
|
* Because the PWM-based waveform is effectively set half a cycle after the software version,
|
|
* it is not acceptable to drive the two tracks on different methiods or it would cause
|
|
* problems for <1 JOIN> etc.
|
|
*
|
|
*/
|
|
|
|
// ATTENTION: this file only compiles on a UnoWifiRev3 or NanoEvery
|
|
// Please refer to DCCTimer.h for general comments about how this class works
|
|
// This is to avoid repetition and duplication.
|
|
#ifdef ARDUINO_ARCH_MEGAAVR
|
|
|
|
#include "DCCTimer.h"
|
|
|
|
INTERRUPT_CALLBACK interruptHandler=0;
|
|
extern char *__brkval;
|
|
extern char *__malloc_heap_start;
|
|
|
|
|
|
void DCCTimer::begin(INTERRUPT_CALLBACK callback) {
|
|
interruptHandler=callback;
|
|
noInterrupts();
|
|
ADC0.CTRLC = (ADC0.CTRLC & 0b00110000) | 0b01000011; // speed up analogRead sample time
|
|
TCB0.CTRLB = TCB_CNTMODE_INT_gc & ~TCB_CCMPEN_bm; // timer compare mode with output disabled
|
|
TCB0.CTRLA = TCB_CLKSEL_CLKDIV2_gc; // 8 MHz ~ 0.125 us
|
|
TCB0.CCMP = CLOCK_CYCLES -1; // 1 tick less for timer reset
|
|
TCB0.INTFLAGS = TCB_CAPT_bm; // clear interrupt request flag
|
|
TCB0.INTCTRL = TCB_CAPT_bm; // Enable the interrupt
|
|
TCB0.CNT = 0;
|
|
TCB0.CTRLA |= TCB_ENABLE_bm; // start
|
|
interrupts();
|
|
}
|
|
|
|
// ISR called by timer interrupt every 58uS
|
|
ISR(TCB0_INT_vect){
|
|
TCB0.INTFLAGS = TCB_CAPT_bm; // Clear interrupt request flag
|
|
interruptHandler();
|
|
}
|
|
|
|
bool DCCTimer::isPWMPin(byte pin) {
|
|
(void) pin;
|
|
return false; // TODO what are the relevant pins?
|
|
}
|
|
|
|
void DCCTimer::setPWM(byte pin, bool high) {
|
|
(void) pin;
|
|
(void) high;
|
|
// TODO what are the relevant pins?
|
|
}
|
|
|
|
void DCCTimer::getSimulatedMacAddress(byte mac[6]) {
|
|
memcpy(mac,(void *) &SIGROW.SERNUM0,6); // serial number
|
|
mac[0] &= 0xFE;
|
|
mac[0] |= 0x02;
|
|
}
|
|
|
|
volatile int DCCTimer::minimum_free_memory=__INT_MAX__;
|
|
|
|
// Return low memory value...
|
|
int DCCTimer::getMinimumFreeMemory() {
|
|
noInterrupts(); // Disable interrupts to get volatile value
|
|
int retval = minimum_free_memory;
|
|
interrupts();
|
|
return retval;
|
|
}
|
|
|
|
extern char *__brkval;
|
|
extern char *__malloc_heap_start;
|
|
|
|
int DCCTimer::freeMemory() {
|
|
char top;
|
|
return __brkval ? &top - __brkval : &top - __malloc_heap_start;
|
|
}
|
|
|
|
#endif
|