mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-11-27 01:56:14 +01:00
204 lines
6.7 KiB
C++
204 lines
6.7 KiB
C++
/*
|
|
* © 2021, Harald Barth.
|
|
*
|
|
* This file is part of DCC-EX
|
|
*
|
|
* This is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* It is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "config.h"
|
|
#include "defines.h"
|
|
#if defined(ARDUINO_ARCH_ESP32)
|
|
#include "DIAG.h"
|
|
#include "DCCRMT.h"
|
|
#include "DCCWaveform.h" // for MAX_PACKET_SIZE
|
|
#include "soc/gpio_sig_map.h"
|
|
|
|
#define DATA_LEN(X) ((X)*9+1) // Each byte has one bit extra and we have one EOF marker
|
|
|
|
#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(4,2,0)
|
|
#error wrong IDF version
|
|
#endif
|
|
|
|
void setDCCBit1(rmt_item32_t* item) {
|
|
item->level0 = 1;
|
|
item->duration0 = DCC_1_HALFPERIOD;
|
|
item->level1 = 0;
|
|
item->duration1 = DCC_1_HALFPERIOD;
|
|
}
|
|
|
|
void setDCCBit0(rmt_item32_t* item) {
|
|
item->level0 = 1;
|
|
item->duration0 = DCC_0_HALFPERIOD;
|
|
item->level1 = 0;
|
|
item->duration1 = DCC_0_HALFPERIOD;
|
|
}
|
|
|
|
// special long zero to trigger scope
|
|
void setDCCBit0Long(rmt_item32_t* item) {
|
|
item->level0 = 1;
|
|
item->duration0 = DCC_0_HALFPERIOD + DCC_0_HALFPERIOD/10;
|
|
item->level1 = 0;
|
|
item->duration1 = DCC_0_HALFPERIOD + DCC_0_HALFPERIOD/10;
|
|
}
|
|
|
|
void setEOT(rmt_item32_t* item) {
|
|
item->val = 0;
|
|
}
|
|
|
|
void IRAM_ATTR interrupt(rmt_channel_t channel, void *t) {
|
|
RMTChannel *tt = (RMTChannel *)t;
|
|
tt->RMTinterrupt();
|
|
}
|
|
|
|
RMTChannel::RMTChannel(byte pin, bool isMain) {
|
|
byte ch;
|
|
byte plen;
|
|
if (isMain) {
|
|
ch = 0;
|
|
plen = PREAMBLE_BITS_MAIN;
|
|
} else {
|
|
ch = 2;
|
|
plen = PREAMBLE_BITS_PROG;
|
|
}
|
|
|
|
// preamble
|
|
preambleLen = plen+2; // plen 1 bits, one 0 bit and one EOF marker
|
|
preamble = (rmt_item32_t*)malloc(preambleLen*sizeof(rmt_item32_t));
|
|
for (byte n=0; n<plen; n++)
|
|
setDCCBit1(preamble + n); // preamble bits
|
|
#ifdef SCOPE
|
|
setDCCBit0Long(preamble + plen); // start of packet 0 bit long version
|
|
#else
|
|
setDCCBit0(preamble + plen); // start of packet 0 bit normal version
|
|
#endif
|
|
setEOT(preamble + plen + 1); // EOT marker
|
|
|
|
// idle
|
|
idleLen = 28;
|
|
idle = (rmt_item32_t*)malloc(idleLen*sizeof(rmt_item32_t));
|
|
if (isMain) {
|
|
for (byte n=0; n<8; n++) // 0 to 7
|
|
setDCCBit1(idle + n);
|
|
for (byte n=8; n<18; n++) // 8, 9 to 16, 17
|
|
setDCCBit0(idle + n);
|
|
for (byte n=18; n<26; n++) // 18 to 25
|
|
setDCCBit1(idle + n);
|
|
} else {
|
|
for (byte n=0; n<26; n++) // all zero
|
|
setDCCBit0(idle + n);
|
|
}
|
|
setDCCBit1(idle + 26); // end bit
|
|
setEOT(idle + 27); // EOT marker
|
|
|
|
// data: max packet size today is 5 + checksum
|
|
maxDataLen = DATA_LEN(MAX_PACKET_SIZE);
|
|
data = (rmt_item32_t*)malloc(maxDataLen*sizeof(rmt_item32_t));
|
|
|
|
rmt_config_t config;
|
|
// Configure the RMT channel for TX
|
|
bzero(&config, sizeof(rmt_config_t));
|
|
config.rmt_mode = RMT_MODE_TX;
|
|
config.channel = channel = (rmt_channel_t)ch;
|
|
config.clk_div = RMT_CLOCK_DIVIDER;
|
|
config.gpio_num = (gpio_num_t)pin;
|
|
config.mem_block_num = 2; // With longest DCC packet 11 inc checksum (future expansion)
|
|
// number of bits needed is 22preamble + start +
|
|
// 11*9 + extrazero + EOT = 124
|
|
// 2 mem block of 64 RMT items should be enough
|
|
|
|
ESP_ERROR_CHECK(rmt_config(&config));
|
|
/*
|
|
// test: config another gpio pin
|
|
gpio_num_t gpioNum = (gpio_num_t)(pin-1);
|
|
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpioNum], PIN_FUNC_GPIO);
|
|
gpio_set_direction(gpioNum, GPIO_MODE_OUTPUT);
|
|
gpio_matrix_out(gpioNum, RMT_SIG_OUT0_IDX, 0, 0);
|
|
*/
|
|
|
|
// NOTE: ESP_INTR_FLAG_IRAM is *NOT* included in this bitmask
|
|
ESP_ERROR_CHECK(rmt_driver_install(config.channel, 0, ESP_INTR_FLAG_LOWMED|ESP_INTR_FLAG_SHARED));
|
|
|
|
DIAG(F("Register interrupt on core %d"), xPortGetCoreID());
|
|
|
|
ESP_ERROR_CHECK(rmt_set_tx_loop_mode(channel, true));
|
|
rmt_register_tx_end_callback(interrupt, this);
|
|
rmt_set_tx_intr_en(channel, true);
|
|
|
|
DIAG(F("Starting channel %d signal generator"), config.channel);
|
|
|
|
// send one bit to kickstart the signal, remaining data will come from the
|
|
// packet queue. We intentionally do not wait for the RMT TX complete here.
|
|
//rmt_write_items(channel, preamble, preambleLen, false);
|
|
RMTprefill();
|
|
preambleNext = true;
|
|
dataReady = false;
|
|
RMTinterrupt();
|
|
}
|
|
|
|
void RMTChannel::RMTprefill() {
|
|
rmt_fill_tx_items(channel, preamble, preambleLen, 0);
|
|
rmt_fill_tx_items(channel, idle, idleLen, preambleLen-1);
|
|
}
|
|
|
|
const byte transmitMask[] = {0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01};
|
|
|
|
int RMTChannel::RMTfillData(const byte buffer[], byte byteCount, byte repeatCount=0) {
|
|
//int RMTChannel::RMTfillData(dccPacket packet) {
|
|
// dataReady: Signals to then interrupt routine. It is set when
|
|
// we have data in the channel buffer which can be copied out
|
|
// to the HW. dataRepeat on the other hand signals back to
|
|
// the caller of this function if the data has been sent enough
|
|
// times (0 to 3 means 1 to 4 times in total).
|
|
if (dataReady == true)
|
|
return 1000;
|
|
if (dataRepeat > 0) // we have still old work to do
|
|
return dataRepeat;
|
|
if (DATA_LEN(byteCount) > maxDataLen) { // this would overun our allocated memory for data
|
|
DIAG(F("Can not convert DCC bytes # %d to DCC bits %d, buffer too small"), byteCount, maxDataLen);
|
|
return -1; // something very broken, can not convert packet
|
|
}
|
|
|
|
// convert bytes to RMT stream of "bits"
|
|
byte bitcounter = 0;
|
|
for(byte n=0; n<byteCount; n++) {
|
|
for(byte bit=0; bit<8; bit++) {
|
|
if (buffer[n] & transmitMask[bit])
|
|
setDCCBit1(data + bitcounter++);
|
|
else
|
|
setDCCBit0(data + bitcounter++);
|
|
}
|
|
setDCCBit0(data + bitcounter++); // zero at end of each byte
|
|
}
|
|
setDCCBit1(data + bitcounter-1); // overwrite previous zero bit with one bit
|
|
setEOT(data + bitcounter++); // EOT marker
|
|
dataLen = bitcounter;
|
|
dataReady = true;
|
|
dataRepeat = repeatCount+1; // repeatCount of 0 means send once
|
|
return 0;
|
|
}
|
|
|
|
void IRAM_ATTR RMTChannel::RMTinterrupt() {
|
|
//no rmt_tx_start(channel,true) as we run in loop mode
|
|
//preamble is always loaded at beginning of buffer
|
|
if (dataReady) { // if we have new data, fill while preamble is running
|
|
rmt_fill_tx_items(channel, data, dataLen, preambleLen-1);
|
|
dataReady = false;
|
|
}
|
|
if (dataRepeat > 0) // if a repeat count was specified, work on that
|
|
dataRepeat--;
|
|
return;
|
|
}
|
|
#endif //ESP32
|