mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-11-30 11:36:13 +01:00
289 lines
9.6 KiB
C++
289 lines
9.6 KiB
C++
/*
|
|
* © 2022, Neil McKechnie. All rights reserved.
|
|
*
|
|
* This file is part of DCC++EX API
|
|
*
|
|
* This is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* It is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* DFPlayer is an MP3 player module with an SD card holder. It also has an integrated
|
|
* amplifier, so it only needs a power supply and a speaker.
|
|
*
|
|
* This driver allows the device to be controlled through IODevice::write() and
|
|
* IODevice::writeAnalogue() calls.
|
|
*
|
|
* The driver is configured as follows:
|
|
*
|
|
* DFPlayer::create(firstVpin, nPins, Serialn);
|
|
*
|
|
* Where firstVpin is the first vpin reserved for reading the device,
|
|
* nPins is the number of pins to be allocated (max 5)
|
|
* and Serialn is the name of the Serial port connected to the DFPlayer (e.g. Serial1).
|
|
*
|
|
* Example:
|
|
* In mySetup function within mySetup.cpp:
|
|
* DFPlayer::create(3500, 5, Serial1);
|
|
*
|
|
* Writing an analogue value 1-2999 to the first pin (3500) will play the numbered file from the SD card;
|
|
* Writing an analogue value 0 to the first pin (3500) will stop the file playing;
|
|
* Writing an analogue value 0-30 to the second pin (3501) will set the volume;
|
|
* Writing a digital value of 1 to a pin will play the file corresponding to that pin, e.g.
|
|
the first file will be played by setting pin 3500, the second by setting pin 3501 etc.;
|
|
* Writing a digital value of 0 to any pin will stop the player;
|
|
* Reading a digital value from any pin will return true(1) if the player is playing, false(0) otherwise.
|
|
*
|
|
* From EX-RAIL, the following commands may be used:
|
|
* SET(3500) -- starts playing the first file (file 1) on the SD card
|
|
* SET(3501) -- starts playing the second file (file 2) on the SD card
|
|
* etc.
|
|
* RESET(3500) -- stops all playing on the player
|
|
* WAITFOR(3500) -- wait for the file currently being played by the player to complete
|
|
* SERVO(3500,2,Instant) -- plays file 2 at current volume
|
|
* SERVO(3501,20,Instant) -- Sets the volume to 20
|
|
*
|
|
* NB The DFPlayer's serial lines are not 5V safe, so connecting the Arduino TX directly
|
|
* to the DFPlayer's RX terminal will cause lots of noise over the speaker, or worse.
|
|
* A 1k resistor in series with the module's RX terminal will alleviate this.
|
|
*
|
|
* Files on the SD card are numbered according to their order in the directory on the
|
|
* card (as listed by the DIR command in Windows). This may not match the order of the files
|
|
* as displayed by Windows File Manager, which sorts the file names. It is suggested that
|
|
* files be copied into an empty SDcard in the desired order, one at a time.
|
|
*/
|
|
|
|
#ifndef IO_DFPlayer_h
|
|
#define IO_DFPlayer_h
|
|
|
|
#include "IODevice.h"
|
|
|
|
class DFPlayer : public IODevice {
|
|
private:
|
|
const uint8_t MAXVOLUME=30;
|
|
HardwareSerial *_serial;
|
|
bool _playing = false;
|
|
uint8_t _inputIndex = 0;
|
|
unsigned long _commandSendTime; // Allows timeout processing
|
|
uint8_t _requestedVolumeLevel = MAXVOLUME;
|
|
uint8_t _currentVolume = MAXVOLUME;
|
|
int _requestedSong = -1; // -1=none, 0=stop, >0=file number
|
|
|
|
public:
|
|
|
|
static void create(VPIN firstVpin, int nPins, HardwareSerial &serial) {
|
|
if (checkNoOverlap(firstVpin,nPins)) new DFPlayer(firstVpin, nPins, serial);
|
|
}
|
|
|
|
protected:
|
|
// Constructor
|
|
DFPlayer(VPIN firstVpin, int nPins, HardwareSerial &serial) :
|
|
IODevice(firstVpin, nPins),
|
|
_serial(&serial)
|
|
{
|
|
addDevice(this);
|
|
}
|
|
|
|
void _begin() override {
|
|
_serial->begin(9600, SERIAL_8N1); // 9600baud, no parity, 1 stop bit
|
|
// Flush any data in input queue
|
|
while (_serial->available()) _serial->read();
|
|
_deviceState = DEVSTATE_INITIALISING;
|
|
|
|
// Send a query to the device to see if it responds
|
|
sendPacket(0x42);
|
|
_commandSendTime = micros();
|
|
}
|
|
|
|
void _loop(unsigned long currentMicros) override {
|
|
// Check for incoming data on _serial, and update busy flag accordingly.
|
|
// Expected message is in the form "7E FF 06 3D xx xx xx xx xx EF"
|
|
while (_serial->available()) {
|
|
int c = _serial->read();
|
|
if (c == 0x7E && _inputIndex == 0)
|
|
_inputIndex = 1;
|
|
else if ((c==0xFF && _inputIndex==1)
|
|
|| (c==0x3D && _inputIndex==3)
|
|
|| (_inputIndex >=4 && _inputIndex <= 8))
|
|
_inputIndex++;
|
|
else if (c==0x06 && _inputIndex==2) {
|
|
// Valid message prefix, so consider the device online
|
|
if (_deviceState==DEVSTATE_INITIALISING) {
|
|
_deviceState = DEVSTATE_NORMAL;
|
|
#ifdef DIAG_IO
|
|
_display();
|
|
#endif
|
|
}
|
|
_inputIndex++;
|
|
} else if (c==0xEF && _inputIndex==9) {
|
|
// End of play
|
|
if (_playing) {
|
|
#ifdef DIAG_IO
|
|
DIAG(F("DFPlayer: Finished"));
|
|
#endif
|
|
_playing = false;
|
|
}
|
|
_inputIndex = 0;
|
|
} else
|
|
_inputIndex = 0; // Unrecognised character sequence, start again!
|
|
}
|
|
|
|
// Check if the initial prompt to device has timed out. Allow 5 seconds
|
|
if (_deviceState == DEVSTATE_INITIALISING && currentMicros - _commandSendTime > 5000000UL) {
|
|
DIAG(F("DFPlayer device not responding on serial port"));
|
|
_deviceState = DEVSTATE_FAILED;
|
|
}
|
|
|
|
// When two commands are sent in quick succession, the device will often fail to
|
|
// execute one. Testing has indicated that a delay of 100ms or more is required
|
|
// between successive commands to get reliable operation.
|
|
// If 100ms has elapsed since the last thing sent, then check if there's some output to do.
|
|
if (currentMicros - _commandSendTime > 100000UL) {
|
|
if (_currentVolume > _requestedVolumeLevel) {
|
|
// Change volume before changing song if volume is reducing.
|
|
_currentVolume = _requestedVolumeLevel;
|
|
sendPacket(0x06, _currentVolume);
|
|
_commandSendTime = currentMicros;
|
|
} else if (_requestedSong > 0) {
|
|
// Change song
|
|
sendPacket(0x03, _requestedSong);
|
|
_requestedSong = -1;
|
|
_commandSendTime = currentMicros;
|
|
} else if (_requestedSong == 0) {
|
|
sendPacket(0x0e); // Pause playing
|
|
_requestedSong = -1;
|
|
_commandSendTime = currentMicros;
|
|
} else if (_currentVolume < _requestedVolumeLevel) {
|
|
// Change volume after changing song if volume is increasing.
|
|
_currentVolume = _requestedVolumeLevel;
|
|
sendPacket(0x06, _currentVolume);
|
|
_commandSendTime = currentMicros;
|
|
}
|
|
}
|
|
delayUntil(currentMicros + 10000); // Only enter every 10ms
|
|
}
|
|
|
|
// Write with value 1 starts playing a song. The relative pin number is the file number.
|
|
// Write with value 0 stops playing.
|
|
void _write(VPIN vpin, int value) override {
|
|
int pin = vpin - _firstVpin;
|
|
if (value) {
|
|
// Value 1, start playing
|
|
#ifdef DIAG_IO
|
|
DIAG(F("DFPlayer: Play %d"), pin+1);
|
|
#endif
|
|
_requestedSong = pin+1;
|
|
_playing = true;
|
|
} else {
|
|
// Value 0, stop playing
|
|
#ifdef DIAG_IO
|
|
DIAG(F("DFPlayer: Stop"));
|
|
#endif
|
|
_requestedSong = 0; // No song
|
|
_playing = false;
|
|
}
|
|
}
|
|
|
|
// WriteAnalogue on first pin uses the nominated value as a file number to start playing, if file number > 0.
|
|
// Volume may be specified as second parameter to writeAnalogue.
|
|
// If value is zero, the player stops playing.
|
|
// WriteAnalogue on second pin sets the output volume.
|
|
//
|
|
void _writeAnalogue(VPIN vpin, int value, uint8_t volume=0, uint16_t=0) override {
|
|
uint8_t pin = vpin - _firstVpin;
|
|
|
|
#ifdef DIAG_IO
|
|
DIAG(F("DFPlayer: VPIN:%d FileNo:%d Volume:%d"), vpin, value, volume);
|
|
#endif
|
|
|
|
// Validate parameter.
|
|
if (volume > MAXVOLUME) volume = MAXVOLUME;
|
|
|
|
if (pin == 0) {
|
|
// Play track
|
|
if (value > 0) {
|
|
if (volume > 0)
|
|
_requestedVolumeLevel = volume;
|
|
_requestedSong = value;
|
|
_playing = true;
|
|
} else {
|
|
_requestedSong = 0; // stop playing
|
|
_playing = false;
|
|
}
|
|
} else if (pin == 1) {
|
|
// Set volume (0-30)
|
|
_requestedVolumeLevel = value;
|
|
}
|
|
}
|
|
|
|
// A read on any pin indicates whether the player is still playing.
|
|
int _read(VPIN) override {
|
|
return _playing;
|
|
}
|
|
|
|
void _display() override {
|
|
DIAG(F("DFPlayer Configured on Vpins:%d-%d %S"), _firstVpin, _firstVpin+_nPins-1,
|
|
(_deviceState==DEVSTATE_FAILED) ? F("OFFLINE") : F(""));
|
|
}
|
|
|
|
private:
|
|
// 7E FF 06 0F 00 01 01 xx xx EF
|
|
// 0 -> 7E is start code
|
|
// 1 -> FF is version
|
|
// 2 -> 06 is length
|
|
// 3 -> 0F is command
|
|
// 4 -> 00 is no receive
|
|
// 5~6 -> 01 01 is argument
|
|
// 7~8 -> checksum = 0 - ( FF+06+0F+00+01+01 )
|
|
// 9 -> EF is end code
|
|
|
|
void sendPacket(uint8_t command, uint16_t arg = 0)
|
|
{
|
|
uint8_t out[] = { 0x7E,
|
|
0xFF,
|
|
06,
|
|
command,
|
|
00,
|
|
static_cast<uint8_t>(arg >> 8),
|
|
static_cast<uint8_t>(arg & 0x00ff),
|
|
00,
|
|
00,
|
|
0xEF };
|
|
|
|
setChecksum(out);
|
|
|
|
// Output the command
|
|
_serial->write(out, sizeof(out));
|
|
}
|
|
|
|
uint16_t calcChecksum(uint8_t* packet)
|
|
{
|
|
uint16_t sum = 0;
|
|
for (int i = 1; i < 7; i++)
|
|
{
|
|
sum += packet[i];
|
|
}
|
|
return -sum;
|
|
}
|
|
|
|
void setChecksum(uint8_t* out)
|
|
{
|
|
uint16_t sum = calcChecksum(out);
|
|
|
|
out[7] = (sum >> 8);
|
|
out[8] = (sum & 0xff);
|
|
}
|
|
};
|
|
|
|
#endif // IO_DFPlayer_h
|