diff --git a/arduino/eeprom_get/eeprom_get.ino b/arduino/eeprom_get/eeprom_get.ino
new file mode 100644
index 0000000..e43abe0
--- /dev/null
+++ b/arduino/eeprom_get/eeprom_get.ino
@@ -0,0 +1,64 @@
+/***
+    eeprom_get example.
+
+    This shows how to use the EEPROM.get() method.
+
+    To pre-set the EEPROM data, run the example sketch eeprom_put.
+    This sketch will run without it, however, the values shown
+    will be shown from what ever is already on the EEPROM.
+
+    This may cause the serial object to print out a large string
+    of garbage if there is no null character inside one of the strings
+    loaded.
+
+    Written by Christopher Andrews 2015
+    Released under MIT licence.
+***/
+
+#include <EEPROM.h>
+
+void setup() {
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+  readConfig(); //Run the next test.
+}
+
+struct config {
+  byte mac[6];
+  byte remoteAddr[4];
+  char serial[4];
+  int remotePort;
+  char name[128];
+};
+
+void printAddr(byte addr[], int size, Stream *stream) {
+  for (int thisByte = 0; thisByte < size; thisByte++) {
+    // print the value of each byte of the IP address:
+    stream->print(addr[thisByte], HEX);
+    if (thisByte < size - 1) {
+      stream->print(".");
+    }
+  }
+}
+
+void readConfig() {
+  int eeAddress = 0; //Move address to the next byte after float 'f'.
+
+  config customVar; //Variable to store custom object read from EEPROM.
+  EEPROM.get(eeAddress, customVar);
+
+  Serial.println("Read custom object from EEPROM: ");
+  printAddr(customVar.mac, sizeof(customVar.mac), &Serial);
+  Serial.println();
+  printAddr(customVar.remoteAddr, sizeof(customVar.remoteAddr), &Serial);
+  Serial.println();
+  Serial.println(customVar.remotePort);
+  Serial.println(customVar.serial);
+  Serial.println(customVar.name);
+}
+
+void loop() {
+  /* Empty loop */
+}
diff --git a/arduino/eeprom_put/eeprom_put.ino b/arduino/eeprom_put/eeprom_put.ino
new file mode 100644
index 0000000..82b88d6
--- /dev/null
+++ b/arduino/eeprom_put/eeprom_put.ino
@@ -0,0 +1,53 @@
+/***
+    eeprom_put example.
+
+    This shows how to use the EEPROM.put() method.
+    Also, this sketch will pre-set the EEPROM data for the
+    example sketch eeprom_get.
+
+    Note, unlike the single byte version EEPROM.write(),
+    the put method will use update semantics. As in a byte
+    will only be written to the EEPROM if the data is actually
+    different.
+
+    Written by Christopher Andrews 2015
+    Released under MIT licence.
+***/
+
+#include <EEPROM.h>
+
+struct config {
+  byte mac[6];
+  byte remoteAddr[4];
+  char serial[4];
+  int remotePort;
+  char name[128];
+};
+
+void setup() {
+
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+  
+  int eeAddress = 0;   //Location we want the data to be put.
+
+  /** Put is designed for use with custom structures also. **/
+
+  //Data to store.
+  config customVar = {
+    { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED },
+    { 192, 168, 10, 123 },
+    "abcd",
+    80,
+    "sensor.server.domain"
+  };
+
+  EEPROM.put(eeAddress, customVar);
+  Serial.print("Written custom data type! \n\nView the example sketch eeprom_get to see how you can retrieve the values!");
+}
+
+void loop() {
+  /* Empty loop */
+}