# BITE - Basic/IoT/Example

Playing with IoT

This project is for educational purposes only. It does not implement any authentication and/or encryption protocol, so it is not suitable for real production.

## Installation

### Requirements

- `docker-ce` or `moby`
- `docker-compose`

The project is compatible with Docker for Windows (using Linux executors), but it is advised to directly use a minimal Linux VM instead (via the preferred hypervisor).

The application stack is composed by the following components:

- [Django](https://www.djangoproject.com/) with [Django REST framework](https://www.django-rest-framework.org/) web application (running via `gunicorn` in production mode)
  - `mqtt-to-db` custom daemon to dump telemetry into the timeseries database
  - telemetry payload is stored as json object (via PostgreSQL JSON data type)
- [Timescale](https://www.timescale.com/) DB, a [PostgreSQL](https://www.postgresql.org/) database with a timeseries extension
- [Mosquitto](https://mosquitto.org/) MQTT broker (see alternatives below)
- [Nginx](http://nginx.org/) as ingress for HTTP (see alternative below)
- [Chrony](https://chrony.tuxfamily.org/) as NTP server (with optional `MD5` encryption)

## Deployment

### Development

```bash
docker-compose -f docker/docker-compose.yml up -d [--scale {bite,mqtt-to-db)=N]
```
It exposes:
- `http://localhost:80` (HTTP)
- `tcp://localhost:1883` (MQTT)
- `udp://localhost:123` (NTP)

Django runs with `DEBUG = True` and `SKIP_WHITELIST = True`

### Development with direct access to services

```bash
docker-compose -f docker/docker-compose.yml -f docker-compose.dev.yml up -d [--scale {bite,mqtt-to-db)=N]
```
It exposes:
- `http://localhost:80` (HTTP)
- `http://localhost:8080` (Django's `runserver`)
- `tcp://localhost:1883` (MQTT)
- `udp://localhost:123` (NTP)
- `tcp://localhost:5432` (PostgreSQL/Timescale)

Django runs with `DEBUG = True` and `SKIP_WHITELIST = True`

### Production

```bash
docker-compose -f docker/docker-compose.yml -f docker-compose.prod.yml up -d [--scale {bite,mqtt-to-db)=N]
```
It exposes:
- `http://localhost:80` (HTTP)
- `tcp://localhost:1883` (MQTT)
- `udp://localhost:123` (NTP)

Django runs with `DEBUG = False` and `SKIP_WHITELIST = False`

## Extra features

The project provides multiple modules that can be combined with the fore-mentioned configurations.

### Traefik

To use [Traefik](https://containo.us/traefik/) instead of Nginx use:
```bash
docker-compose -f docker/docker-compose.yml up -f docker/ingress/docker-compose.traefik.yml -d
```

### VerneMQ

A ~8x memory usage can be expected compared to Mosquitto.

To use [VerneMQ](https://vernemq.com/) instead of Mosquitto use:
```bash
docker-compose -f docker/docker-compose.yml up -f docker/mqtt/docker-compose.vernemq.yml -d
```

### RabbitMQ

RabbitMQ does provides AMQP protocol too, but ingestion on the application side is not implemented yet.
A ~10x memory usage can be expected compared to Mosquitto.

To use [RabbitMQ](https://www.rabbitmq.com/) (with the MQTT plugin enabled) instead of Mosquitto use:
```bash
docker-compose -f docker/docker-compose.yml up -f docker/mqtt/docker-compose.rabbitmq.yml -d
```

## EDGE gateway simulation (via dind)

An EDGE gateway, with containers as modules, may be simulated via dind (docker-in-docker).

### Start the EDGE

```bash
docker-compose -f docker/docker-compose.yml up -f docker/edge/docker-compose.edge.yml -d
```

### Run the modules inside the EDGE

```bash
DOCKER_HOST='127.0.0.1:22375' docker-compose -f docker-compose.modules.yml up -d [--scale {device-http,device-mqtt}=N]
```

## Ardunio

A simple Arduino UNO sketch is provided in the `arduino/tempLightSensor` folder. The sketch reads temperature and light from sensors. The simple schematic is:

![tempLightSensor](./arduino/tempLightSensor/tempLightSensor.svg)

The sketch does require an Ethernet shield and a bunch of libraries which are available as git submodules under `arduino/libraries`.
Be advised that some libraries (notably the NTP one) are customized.

Configuration parameters are stored and retrieved from the EEPROM. An helper sketch to update the EEPROM is available under `arduino/eeprom_prog`

An `ESP32` board (or similar Arduino) may be used, with some adaptions, too.