dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-11-25 09:06:13 +01:00
Code Releases Activity
99521f8a3f
CommandStation-EX/EXRAIL2MacroReset.h

229 lines
5.0 KiB
C
Raw Normal View History

Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
/*
update copyright notes
2022-01-07 02:28:35 +01:00
* © 2021-2022 Chris Harlow
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
* © 2020,2021 Chris Harlow. All rights reserved.
*
* This file is part of CommandStation-EX
*
* This is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* It is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*/
// This file cleans and resets the RMFT2 Macros.
// It is used between passes to reduce complexity in RMFT2Macros.h
// DO NOT add an include guard to this file.
// Undefine all RMFT macros
#undef ACTIVATE
#undef ACTIVATEL
#undef AFTER
#undef ALIAS
#undef AMBER
#undef AT
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#undef ATGTE
#undef ATLT
ATTIMEOUT / IFTIMEOUT
2022-01-03 11:15:10 +01:00
#undef ATTIMEOUT
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef AUTOMATION
#undef AUTOSTART
Exrail BROADCAST and POWERON version 4.0.1 (#216) * EXRAIL BROADCAST("msg") UNTESTED * Add POWERON to EXRAIL * POWERON only powers main, join will do both * Update Version 4.0.1 * Broadcast jopin after driveaway * rollback of previous edit line 535 WiThrottle.cpp * restructure GetLocoCallback() for better readability and put broadcastPower() at right place Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com> Co-authored-by: Harald Barth <haba@kth.se>
2022-03-07 17:30:47 +01:00
#undef BROADCAST
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef CALL
#undef CLOSE
#undef DEACTIVATE
#undef DEACTIVATEL
#undef DELAY
#undef DELAYMINS
#undef DELAYRANDOM
#undef DONE
#undef DRIVE
ELSE in EXRAIL
2022-01-02 20:41:57 +01:00
#undef ELSE
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef ENDEXRAIL
#undef ENDIF
#undef ENDTASK
#undef ESTOP
#undef EXRAIL
#undef FADE
#undef FOFF
#undef FOLLOW
#undef FON
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#undef FORGET
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef FREE
#undef FWD
#undef GREEN
#undef IF
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#undef IFAMBER
Add IFTHROWN/IFCLOSED to Exrail
2021-12-29 12:15:31 +01:00
#undef IFCLOSED
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#undef IFGREEN
Chgange IFANALOG to IFGTE/IFLT
2021-11-30 14:52:22 +01:00
#undef IFGTE
#undef IFLT
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef IFNOT
#undef IFRANDOM
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#undef IFRED
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef IFRESERVE
Add IFTHROWN/IFCLOSED to Exrail
2021-12-29 12:15:31 +01:00
#undef IFTHROWN
ATTIMEOUT / IFTIMEOUT
2022-01-03 11:15:10 +01:00
#undef IFTIMEOUT
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef INVERT_DIRECTION
#undef JOIN
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#undef KILLALL
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef LATCH
#undef LCD
#undef LCN
#undef ONACTIVATE
#undef ONACTIVATEL
#undef ONDEACTIVATE
#undef ONDEACTIVATEL
#undef ONCLOSE
#undef ONTHROW
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#undef PARSE
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef PAUSE
#undef PIN_TURNOUT
#undef PRINT
#undef POM
#undef POWEROFF
Exrail BROADCAST and POWERON version 4.0.1 (#216) * EXRAIL BROADCAST("msg") UNTESTED * Add POWERON to EXRAIL * POWERON only powers main, join will do both * Update Version 4.0.1 * Broadcast jopin after driveaway * rollback of previous edit line 535 WiThrottle.cpp * restructure GetLocoCallback() for better readability and put broadcastPower() at right place Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com> Co-authored-by: Harald Barth <haba@kth.se>
2022-03-07 17:30:47 +01:00
#undef POWERON
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef READ_LOCO
#undef RED
#undef RESERVE
#undef RESET
#undef RESUME
#undef RETURN
Roster list part 1
2021-12-26 19:24:04 +01:00
#undef REV
#undef ROSTER
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef ROUTE
#undef SENDLOCO
#undef SEQUENCE
#undef SERIAL
#undef SERIAL1
#undef SERIAL2
#undef SERIAL3
#undef SERVO
#undef SERVO2
#undef SERVO_TURNOUT
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#undef SERVO_SIGNAL
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef SET
#undef SETLOCO
#undef SIGNAL
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#undef SIGNALH
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef SPEED
#undef START
#undef STOP
#undef THROW
#undef TURNOUT
#undef UNJOIN
#undef UNLATCH
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#undef VIRTUAL_TURNOUT
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#undef WAITFOR
#undef XFOFF
#undef XFON
#ifndef RMFT2_UNDEF_ONLY
#define ACTIVATE(addr,subaddr)
#define ACTIVATEL(addr)
#define AFTER(sensor_id)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define ALIAS(name,value...)
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define AMBER(signal_id)
#define AT(sensor_id)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define ATGTE(sensor_id,value)
#define ATLT(sensor_id,value)
ATTIMEOUT / IFTIMEOUT
2022-01-03 11:15:10 +01:00
#define ATTIMEOUT(sensor_id,timeout_ms)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define AUTOMATION(id,description)
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define AUTOSTART
Exrail BROADCAST and POWERON version 4.0.1 (#216) * EXRAIL BROADCAST("msg") UNTESTED * Add POWERON to EXRAIL * POWERON only powers main, join will do both * Update Version 4.0.1 * Broadcast jopin after driveaway * rollback of previous edit line 535 WiThrottle.cpp * restructure GetLocoCallback() for better readability and put broadcastPower() at right place Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com> Co-authored-by: Harald Barth <haba@kth.se>
2022-03-07 17:30:47 +01:00
#define BROADCAST(msg)
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define CALL(route)
#define CLOSE(id)
#define DEACTIVATE(addr,subaddr)
#define DEACTIVATEL(addr)
#define DELAY(mindelay)
#define DELAYMINS(mindelay)
#define DELAYRANDOM(mindelay,maxdelay)
#define DONE
#define DRIVE(analogpin)
ELSE in EXRAIL
2022-01-02 20:41:57 +01:00
#define ELSE
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define ENDEXRAIL
#define ENDIF
#define ENDTASK
#define ESTOP
#define EXRAIL
#define FADE(pin,value,ms)
#define FOFF(func)
#define FOLLOW(route)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define FON(func)
#define FORGET
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define FREE(blockid)
#define FWD(speed)
#define GREEN(signal_id)
#define IF(sensor_id)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define IFAMBER(signal_id)
Add IFTHROWN/IFCLOSED to Exrail
2021-12-29 12:15:31 +01:00
#define IFCLOSED(turnout_id)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define IFGREEN(signal_id)
Chgange IFANALOG to IFGTE/IFLT
2021-11-30 14:52:22 +01:00
#define IFGTE(sensor_id,value)
#define IFLT(sensor_id,value)
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define IFNOT(sensor_id)
Add IFTHROWN/IFCLOSED to Exrail
2021-12-29 12:15:31 +01:00
#define IFRANDOM(percent)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define IFRED(signal_id)
Add IFTHROWN/IFCLOSED to Exrail
2021-12-29 12:15:31 +01:00
#define IFTHROWN(turnout_id)
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define IFRESERVE(block)
ATTIMEOUT / IFTIMEOUT
2022-01-03 11:15:10 +01:00
#define IFTIMEOUT
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define INVERT_DIRECTION
#define JOIN
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define KILLALL
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define LATCH(sensor_id)
#define LCD(row,msg)
#define LCN(msg)
#define ONACTIVATE(addr,subaddr)
#define ONACTIVATEL(linear)
#define ONDEACTIVATE(addr,subaddr)
#define ONDEACTIVATEL(linear)
#define ONCLOSE(turnout_id)
#define ONTHROW(turnout_id)
#define PAUSE
#define PIN_TURNOUT(id,pin,description...)
#define PRINT(msg)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define PARSE(msg)
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define POM(cv,value)
#define POWEROFF
Exrail BROADCAST and POWERON version 4.0.1 (#216) * EXRAIL BROADCAST("msg") UNTESTED * Add POWERON to EXRAIL * POWERON only powers main, join will do both * Update Version 4.0.1 * Broadcast jopin after driveaway * rollback of previous edit line 535 WiThrottle.cpp * restructure GetLocoCallback() for better readability and put broadcastPower() at right place Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com> Co-authored-by: Harald Barth <haba@kth.se>
2022-03-07 17:30:47 +01:00
#define POWERON
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define READ_LOCO
#define RED(signal_id)
#define RESERVE(blockid)
#define RESET(pin)
#define RESUME
#define RETURN
#define REV(speed)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define ROUTE(id,description)
Roster list part 1
2021-12-26 19:24:04 +01:00
#define ROSTER(cab,name,funcmap...)
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define SENDLOCO(cab,route)
#define SEQUENCE(id)
#define SERIAL(msg)
#define SERIAL1(msg)
#define SERIAL2(msg)
#define SERIAL3(msg)
#define SERVO(id,position,profile)
#define SERVO2(id,position,duration)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define SERVO_SIGNAL(vpin,redpos,amberpos,greenpos)
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define SERVO_TURNOUT(id,pin,activeAngle,inactiveAngle,profile,description...)
#define SET(pin)
#define SETLOCO(loco)
#define SIGNAL(redpin,amberpin,greenpin)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define SIGNALH(redpin,amberpin,greenpin)
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define SPEED(speed)
#define START(route)
#define STOP
#define THROW(id)
#define TURNOUT(id,addr,subaddr,description...)
#define UNJOIN
#define UNLATCH(sensor_id)
Servo signal (#227) Prepping for version 4.1 SERVO_SIGNAL definition in EXRAIL SERVO_SIGNAL(vpin, redpos, amberpos, greenpos) use RED/AMBER/GREEN as for led signals. * SIGNALH, ATGTE, ATLT UNTESTED * Automatic ALIAS(name) and _ in keywords * EXRAIL FORGET current loco * EXRAIL </KILL ALL> * EXRAIL VIRTUAL_TURNOUT * Cleanup version.h * Update version.h (#223) Rewrite & Updated the 4.0.0 Section * </KILL ALL> fix * Incoming LCN turnout throw. * KILLALL macro and DIAGNOSTIC messages when KILL command used. * EXRAIL PARSE * Rebuild throttle info getters UNTESTED... create different methods to obtain throttle info without being withrottle specific. Also implements turnout description of "*" as hidden. * J command parsing JA JR JT commands parsed EXRAIL sets hidden turnout state HIDDEN description macro Turnouts hidden flag bit UNO seems OK, MEGA UNTESTED * Assist notes draft & syntax tweaks * Throttle notes * uno memory saver * JA JR and <t cab> * Subtle corrections * Update version.h * I2C code corrections Corrections to I2C code: 1) I2CManager_Mega4809.h: Correct bitwise 'and' to logical 'and' - no impact. 2) I2CManager_Wire.h: Ensure that error codes from Wire subsystem are passed back to caller in queueRequest(). * RAG Ifs and cmds * IF block perf/memory * Allow negative route ids. * correct GREEN keyword * Update version.h * myFilter auto detect * Update version.h * fix weak ref to myFilter * ACK defaults now 50-2000-20000 * Update version.h * Improved SIGNALs startup and diagnostics * Update IO_PCA9685.cpp * Allow turnout id 0 * Position servo pin used as GPIO * NoPowerOff LEDS * CALLBACK parameter optional for Write * WRITE CV ON PROG <W CV VALUE> Callback parameters are now optional on PROG * Updated CV read command <R cv> Equivalent to <V cv 0> uses the verify callback. Co-authored-by: Asbelos <asbelos@btinternet.com> Co-authored-by: Kcsmith0708 <kcsmith0708@wowway.com> Co-authored-by: Neil McKechnie <neilmck999@gmail.com> Co-authored-by: Ash-4 <81280775+Ash-4@users.noreply.github.com>
2022-05-03 22:53:33 +02:00
#define VIRTUAL_TURNOUT(id,description...)
Turnout Descriptions UNTESTED Also allows alias inside EXRAIL Allows self-guarded code Ignores EXRAIL and ENDEXRAIL keywords as unnecessary.
2021-11-27 12:29:26 +01:00
#define WAITFOR(pin)
#define XFOFF(cab,func)
#define XFON(cab,func)
#endif
Copy Permalink