dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-23 21:01:25 +01:00
Code Releases Activity

remove unused configs

Browse Source
This commit is contained in:
Harald Barth 2020-09-26 22:56:35 +02:00
parent 79201a911c
commit 00202e7966
1 changed files with 10 additions and 56 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

66
config.example.h
View File

@ -15,23 +15,18 @@ The configuration file for DCC++ EX Command Station
// the correct resistor could damage the sense pin on your Arduino or destroy
// the device.
//
// DEFINE MOTOR_SHIELD_TYPE ACCORDING TO THE FOLLOWING TABLE:
// DEFINE MOTOR_SHIELD_TYPE BELOW ACCORDING TO THE FOLLOWING TABLE:
//
// STANDARD_MOTOR_SHIELD : Arduino Motor shield Rev3 based on the L298 with 18V 2A per channel
// POLOLU_MOTOR_SHIELD : Pololu MC33926 Motor Driver (not recommended for prog track)
// FUNDUMOTO_SHIELD : Fundumoto Shield, no current sensing (not recommended, no short protection)
// FIREBOX_MK1 : The Firebox MK1
// FIREBOX_MK1S : The Firebox MK1S
// |
// +-----------------------v
//
// STANDARD_MOTOR_SHIELD = ARDUINO MOTOR SHIELD (MAX 18V/2A PER CHANNEL) Arduino Motor shield Rev3 based on the L298
// POLOLU_MOTOR_SHIELD = POLOLU MC33926 MOTOR SHIELD (MAX 28V/2.5 PER CHANNEL) Pololu MC33926 Motor Driver (shield or carrier)
// FUNDUMOTO_SHIELD = FunduMoto Motor Shield
// FIREBOX_MK1 = Firebox MK1
// FIREBOX_MK1S = Firebox MK1S
#define MOTOR_SHIELD_TYPE STANDARD_MOTOR_SHIELD
/////////////////////////////////////////////////////////////////////////////////////
//
// DEFINE PROGRAM TRACK CURRENT LIMIT IN MILLIAMPS
#define TRIP_CURRENT_PROG 250
/////////////////////////////////////////////////////////////////////////////////////
//
// The IP port to talk to a WIFI or Ethernet shield.
@ -57,7 +52,6 @@ The configuration file for DCC++ EX Command Station
//
// DEFINE STATIC IP ADDRESS *OR* COMMENT OUT TO USE DHCP
//
//#define IP_ADDRESS { 192, 168, 1, 200 }
/////////////////////////////////////////////////////////////////////////////////////
@ -67,49 +61,9 @@ The configuration file for DCC++ EX Command Station
// Uncomment to use with Ethernet Shields
//
// NOTE: This is not used with ESP8266 WiFi modules.
//
// #define MAC_ADDRESS { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xEF }
/////////////////////////////////////////////////////////////////////////////////////
//
// Allows using a pin as a trigger for a scope or analyzer so we can capture only
// the important parts of the data stream
//
// USE_TRIGGERPIN: Enable code that switches the trigger pin on and off at end
// of the preamble. This takes some clock cycles in the
// interrupt routine for the main track.
// USE_TRIGGERPIN_PER_BIT: As above but for every bit. This only makes sense
// if USE_TRIGGERPIN is set.
//
// The value of the TRIGGERPIN is defined in DCCppEX.h because it might
// be board specific
//
//#define USE_TRIGGERPIN
//#define USE_TRIGGERPIN_PER_BIT
/////////////////////////////////////////////////////////////////////////////////////
//
// Define only of you need the store to EEPROM feature. This takes RAM and
// you may need to use less MAX_MAIN_REGISTERS to compensate (at least on the UNO)
#define EESTORE
/////////////////////////////////////////////////////////////////////////////////////
//
// This shows the status and version at startup. This takes RAM. You can comment
// this line if you need to increase MAX_MAIN_REGISTERS(at least on the UNO)
#define SHOWCONFIG
/////////////////////////////////////////////////////////////////////////////////////
//
// This is different from the above config display which only shows one line at startup
// This defines a pin that when jumpered to ground before powering up the Arduinio,
// will display more detailed settings for diagnostics. You must remove the jumper and
// restart the Arduino to return to normal operation
#define SHOW_CONFIG_DETAIL_PIN A2
/////////////////////////////////////////////////////////////////////////////////////
//
// DEFINE LCD SCREEN USAGE BY THE BASE STATION