dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-11-22 23:56:13 +01:00
Code Releases Activity

Update DCCTimerSTM32.cpp

Browse Source 
Enable hardware pulse generation on STM32 for pins 12 and 13 (standard motor shield pins), using timers TIM2 and TIM3.  Any other pins will currently be controlled directly by the interrupt routine (in effect, by digitalWrite calls).
This commit is contained in:
Neil McKechnie 2023-02-21 11:03:14 +00:00
parent 43b1e8db21
commit 034bb6b675
1 changed files with 26 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

42
DCCTimerSTM32.cpp
View File

@ -51,10 +51,13 @@ HardwareSerial Serial1(PG9, PG14); // Rx=PG9, Tx=PG14 -- D0, D1 - F412ZG/F446ZE
#endif
INTERRUPT_CALLBACK interruptHandler=0;
// Let's use STM32's timer #2 which supports hardware pulse generation on pins D3 and D6
// (accurate timing, independent of the latency of interrupt handling).
// Pin D3 is driven by TIM2 channel 2 and D6 is TIM2 channel 3.
// Let's use STM32's timer #2 which supports hardware pulse generation on pin D13.
// Also, timer #3 will do hardware pulses on pin D12. This gives
// accurate timing, independent of the latency of interrupt handling.
// We only need to interrupt on one of these (TIM2), the other will just generate
// pulses.
HardwareTimer timer(TIM2);
HardwareTimer timerAux(TIM3);
// Timer IRQ handler
void Timer_Handler() {
@ -67,24 +70,30 @@ void DCCTimer::begin(INTERRUPT_CALLBACK callback) {
// adc_set_sample_rate(ADC_SAMPLETIME_480CYCLES);
timer.pause();
timerAux.pause();
timer.setPrescaleFactor(1);
timer.setOverflow(DCC_SIGNAL_TIME, MICROSEC_FORMAT);
timer.attachInterrupt(Timer_Handler);
timer.refresh();
timerAux.setPrescaleFactor(1);
timerAux.setOverflow(DCC_SIGNAL_TIME, MICROSEC_FORMAT);
timerAux.refresh();
timer.resume();
timerAux.resume();
interrupts();
}
bool DCCTimer::isPWMPin(byte pin) {
// Timer 2 Channel 2 controls pin D3, and Timer2 Channel 3 controls D6.
// Timer 2 Channel 1 controls pin D13, and Timer3 Channel 1 controls D12.
// Enable the appropriate timer channel.
switch (pin) {
case 3:
timer.setMode(2, TIMER_OUTPUT_COMPARE_INACTIVE, D3);
case 12:
timerAux.setMode(1, TIMER_OUTPUT_COMPARE_INACTIVE, D12);
return true;
case 6:
timer.setMode(3, TIMER_OUTPUT_COMPARE_INACTIVE, D6);
case 13:
timer.setMode(1, TIMER_OUTPUT_COMPARE_INACTIVE, D13);
return true;
default:
return false;
@ -94,25 +103,26 @@ bool DCCTimer::isPWMPin(byte pin) {
void DCCTimer::setPWM(byte pin, bool high) {
// Set the timer so that, at the next counter overflow, the requested
// pin state is activated automatically before the interrupt code runs.
// TIM2 is timer, TIM3 is timerAux.
switch (pin) {
case 3:
case 12:
if (high)
TIM2->CCMR1 = (TIM2->CCMR1 & ~TIM_CCMR1_OC2M_Msk) | TIM_CCMR1_OC2M_0;
TIM3->CCMR1 = (TIM3->CCMR1 & ~TIM_CCMR1_OC1M_Msk) | TIM_CCMR1_OC1M_0;
else
TIM2->CCMR1 = (TIM2->CCMR1 & ~TIM_CCMR1_OC2M_Msk) | TIM_CCMR1_OC2M_1;
TIM3->CCMR1 = (TIM3->CCMR1 & ~TIM_CCMR1_OC1M_Msk) | TIM_CCMR1_OC1M_1;
break;
case 6:
case 13:
if (high)
TIM2->CCMR2 = (TIM2->CCMR2 & ~TIM_CCMR2_OC3M_Msk) | TIM_CCMR2_OC3M_0;
TIM2->CCMR1 = (TIM2->CCMR1 & ~TIM_CCMR1_OC1M_Msk) | TIM_CCMR1_OC1M_0;
else
TIM2->CCMR2 = (TIM2->CCMR2 & ~TIM_CCMR2_OC3M_Msk) | TIM_CCMR2_OC3M_1;
TIM2->CCMR1 = (TIM2->CCMR1 & ~TIM_CCMR1_OC1M_Msk) | TIM_CCMR1_OC1M_1;
break;
}
}
void DCCTimer::clearPWM() {
timer.setMode(2, TIMER_OUTPUT_COMPARE_INACTIVE, NC);
timer.setMode(3, TIMER_OUTPUT_COMPARE_INACTIVE, NC);
timer.setMode(1, TIMER_OUTPUT_COMPARE_INACTIVE, NC);
timerAux.setMode(1, TIMER_OUTPUT_COMPARE_INACTIVE, NC);
}
void DCCTimer::getSimulatedMacAddress(byte mac[6]) {