mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-23 12:51:24 +01:00
Merge branch 'master' into copyrightmessages
This commit is contained in:
Harald Barth
commit
5eabe934b8
4
DCC.cpp
4
DCC.cpp
@ -904,6 +904,10 @@ void DCC::callback(int value) {
|
||||
|
||||
switch (callbackState) {
|
||||
case AFTER_WRITE: // first attempt to callback after a write operation
|
||||
if (!ackManagerRejoin && !DCCWaveform::progTrack.autoPowerOff) {
|
||||
callbackState=READY;
|
||||
break;
|
||||
} // lines 906-910 added. avoid wait after write. use 1 PROG
|
||||
callbackStart=millis();
|
||||
callbackState=WAITING_100;
|
||||
if (Diag::ACK) DIAG(F("Stable 100mS"));
|
||||
|
||||
22
DisplayInterface.cpp
Normal file
22
DisplayInterface.cpp
Normal file
@ -0,0 +1,22 @@
|
||||
/*
|
||||
* © 2021, Chris Harlow, Neil McKechnie. All rights reserved.
|
||||
*
|
||||
* This file is part of CommandStation-EX
|
||||
*
|
||||
* This is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* It is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "DisplayInterface.h"
|
||||
|
||||
DisplayInterface *DisplayInterface::lcdDisplay = 0;
|
||||
35
DisplayInterface.h
Normal file
35
DisplayInterface.h
Normal file
@ -0,0 +1,35 @@
|
||||
/*
|
||||
* © 2021, Chris Harlow, Neil McKechnie. All rights reserved.
|
||||
*
|
||||
* This file is part of CommandStation-EX
|
||||
*
|
||||
* This is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* It is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#ifndef DisplayInterface_h
|
||||
#define DisplayInterface_h
|
||||
|
||||
#include <Arduino.h>
|
||||
|
||||
// Definition of base class for displays. The base class does nothing.
|
||||
class DisplayInterface : public Print {
|
||||
public:
|
||||
virtual DisplayInterface* loop2(bool force) { (void)force; return NULL; };
|
||||
virtual void setRow(byte line) { (void)line; };
|
||||
virtual void clear() {};
|
||||
virtual size_t write(uint8_t c) { (void)c; return 0; };
|
||||
|
||||
static DisplayInterface *lcdDisplay;
|
||||
};
|
||||
|
||||
#endif
|
||||
@ -68,6 +68,16 @@ EthernetInterface::EthernetInterface()
|
||||
DIAG(F("Ethernet shield not found"));
|
||||
return;
|
||||
}
|
||||
|
||||
unsigned long startmilli = millis();
|
||||
while ((millis() - startmilli) < 5500) // Loop to give time to check for cable connection
|
||||
{
|
||||
if (Ethernet.linkStatus() == LinkON)
|
||||
break;
|
||||
DIAG(F("Ethernet waiting for link (1sec) "));
|
||||
delay(1000);
|
||||
}
|
||||
|
||||
if (Ethernet.linkStatus() == LinkOFF) {
|
||||
DIAG(F("Ethernet cable not connected"));
|
||||
return;
|
||||
|
||||
5
FSH.h
5
FSH.h
@ -29,6 +29,7 @@
|
||||
* __FlashStringHelper Use FSH instead.
|
||||
* PROGMEM use FLASH instead
|
||||
* pgm_read_byte_near use GETFLASH instead.
|
||||
* pgm_read_word_near use GETFLASHW instead.
|
||||
*
|
||||
*/
|
||||
#include <Arduino.h>
|
||||
@ -39,10 +40,14 @@
|
||||
#define F(str) (str)
|
||||
typedef char FSH;
|
||||
#define GETFLASH(addr) (*(const unsigned char *)(addr))
|
||||
#define GETFLASHW(addr) (*(const unsigned short *)(addr))
|
||||
#define FLASH
|
||||
#define strlen_P strlen
|
||||
#define strcpy_P strcpy
|
||||
#else
|
||||
typedef __FlashStringHelper FSH;
|
||||
#define GETFLASH(addr) pgm_read_byte_near(addr)
|
||||
#define GETFLASHW(addr) pgm_read_word_near(addr)
|
||||
#define FLASH PROGMEM
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@ -1 +1 @@
|
||||
#define GITHUB_SHA "90487d2"
|
||||
#define GITHUB_SHA "1941402"
|
||||
|
||||
@ -73,6 +73,7 @@ void LCDDisplay::loop() {
|
||||
|
||||
LCDDisplay *LCDDisplay::loop2(bool force) {
|
||||
if (!lcdDisplay) return NULL;
|
||||
|
||||
unsigned long currentMillis = millis();
|
||||
|
||||
if (!force) {
|
||||
@ -159,4 +160,4 @@ void LCDDisplay::moveToNextRow() {
|
||||
void LCDDisplay::skipBlankRows() {
|
||||
while (!done && rowBuffer[rowNext][0] == 0)
|
||||
moveToNextRow();
|
||||
}
|
||||
}
|
||||
|
||||
30
LCDDisplay.h
30
LCDDisplay.h
@ -19,6 +19,7 @@
|
||||
#ifndef LCDDisplay_h
|
||||
#define LCDDisplay_h
|
||||
#include <Arduino.h>
|
||||
#include "DisplayInterface.h"
|
||||
|
||||
#if __has_include ( "config.h")
|
||||
#include "config.h"
|
||||
@ -29,43 +30,44 @@
|
||||
#define MAX_MSG_SIZE 16
|
||||
#endif
|
||||
|
||||
// Set default scroll mode (overridable in config.h)
|
||||
#if !defined(SCROLLMODE)
|
||||
#define SCROLLMODE 1
|
||||
#endif
|
||||
|
||||
// This class is created in LCDisplay_Implementation.h
|
||||
|
||||
class LCDDisplay : public Print {
|
||||
class LCDDisplay : public DisplayInterface {
|
||||
public:
|
||||
static const int MAX_LCD_ROWS = 8;
|
||||
static const int MAX_LCD_COLS = MAX_MSG_SIZE;
|
||||
static const long LCD_SCROLL_TIME = 3000; // 3 seconds
|
||||
|
||||
static LCDDisplay* lcdDisplay;
|
||||
LCDDisplay();
|
||||
void interfake(int p1, int p2, int p3);
|
||||
|
||||
// Internally handled functions
|
||||
static void loop();
|
||||
LCDDisplay* loop2(bool force);
|
||||
void setRow(byte line);
|
||||
void clear();
|
||||
|
||||
virtual size_t write(uint8_t b);
|
||||
using Print::write;
|
||||
size_t write(uint8_t b);
|
||||
|
||||
protected:
|
||||
uint8_t lcdRows;
|
||||
uint8_t lcdCols;
|
||||
|
||||
private:
|
||||
void moveToNextRow();
|
||||
void skipBlankRows();
|
||||
|
||||
// Relay functions to the live driver
|
||||
void clearNative();
|
||||
void displayNative();
|
||||
void setRowNative(byte line);
|
||||
void writeNative(char b);
|
||||
// Relay functions to the live driver in the subclass
|
||||
virtual void clearNative() = 0;
|
||||
virtual void setRowNative(byte line) = 0;
|
||||
virtual size_t writeNative(uint8_t b) = 0;
|
||||
|
||||
unsigned long lastScrollTime = 0;
|
||||
int8_t hotRow = 0;
|
||||
int8_t hotCol = 0;
|
||||
int8_t topRow = 0;
|
||||
uint8_t lcdRows;
|
||||
uint8_t lcdCols;
|
||||
int8_t slot = 0;
|
||||
int8_t rowFirst = -1;
|
||||
int8_t rowNext = 0;
|
||||
|
||||
@ -27,29 +27,27 @@
|
||||
|
||||
#ifndef LCD_Implementation_h
|
||||
#define LCD_Implementation_h
|
||||
#include <Wire.h>
|
||||
#include "LCDDisplay.h"
|
||||
#include "SSD1306Ascii.h"
|
||||
#include "LiquidCrystal_I2C.h"
|
||||
|
||||
LCDDisplay * LCDDisplay::lcdDisplay=0;
|
||||
|
||||
// Implement the LCDDisplay shim class as a singleton.
|
||||
// Notice that the LCDDisplay class declaration (LCDDisplay.h) is independent of the library
|
||||
// but the implementation is compiled here with dependencies on LCDDriver which is
|
||||
// specific to the library in use.
|
||||
// Thats the workaround to the drivers not all implementing a common interface.
|
||||
|
||||
#if defined(OLED_DRIVER)
|
||||
#include "LCD_OLED.h"
|
||||
#define CONDITIONAL_LCD_START for (LCDDisplay * dummy=new LCDDisplay();dummy!=NULL; dummy=dummy->loop2(true))
|
||||
// The DisplayInterface class implements a displayy handler with no code (null device);
|
||||
// The LCDDisplay class sub-classes DisplayInterface to provide the common display code;
|
||||
// Then LCDDisplay class is subclassed to the specific device type classes:
|
||||
// SSD1306AsciiWire for I2C OLED driver with SSD1306 or SH1106 controllers;
|
||||
// LiquidCrystal_I2C for I2C LCD driver for HD44780 with PCF8574 'backpack'.
|
||||
|
||||
#if defined(OLED_DRIVER)
|
||||
#define CONDITIONAL_LCD_START for (DisplayInterface * dummy=new SSD1306AsciiWire(OLED_DRIVER);dummy!=NULL; dummy=dummy->loop2(true))
|
||||
|
||||
#elif defined(LCD_DRIVER)
|
||||
#define CONDITIONAL_LCD_START for (DisplayInterface * dummy=new LiquidCrystal_I2C(LCD_DRIVER);dummy!=NULL; dummy=dummy->loop2(true))
|
||||
|
||||
#elif defined(LCD_DRIVER)
|
||||
#include "LCD_LCD.h"
|
||||
#define CONDITIONAL_LCD_START for (LCDDisplay * dummy=new LCDDisplay();dummy!=NULL; dummy=dummy->loop2(true))
|
||||
|
||||
#else
|
||||
#include "LCD_NONE.h"
|
||||
#define CONDITIONAL_LCD_START if (true) /* NO LCD CONFIG, but do the LCD macros to get DIAGS */
|
||||
#else
|
||||
// Create null display handler just in case someone calls lcdDisplay->something without checking if lcdDisplay is NULL!
|
||||
#define CONDITIONAL_LCD_START { new DisplayInterface(); }
|
||||
#endif
|
||||
|
||||
#endif // LCD_Implementation_h
|
||||
|
||||
@ -20,7 +20,7 @@
|
||||
|
||||
#include <Arduino.h>
|
||||
#include "LiquidCrystal_I2C.h"
|
||||
#include "I2CManager.h"
|
||||
#include "DIAG.h"
|
||||
|
||||
// When the display powers up, it is configured as follows:
|
||||
//
|
||||
@ -44,30 +44,30 @@
|
||||
LiquidCrystal_I2C::LiquidCrystal_I2C(uint8_t lcd_Addr, uint8_t lcd_cols,
|
||||
uint8_t lcd_rows) {
|
||||
_Addr = lcd_Addr;
|
||||
_cols = lcd_cols;
|
||||
_rows = lcd_rows;
|
||||
_backlightval = LCD_NOBACKLIGHT;
|
||||
}
|
||||
lcdRows = lcd_rows;
|
||||
lcdCols = lcd_cols;
|
||||
|
||||
void LiquidCrystal_I2C::init() { init_priv(); }
|
||||
_backlightval = 0;
|
||||
|
||||
void LiquidCrystal_I2C::init_priv() {
|
||||
I2CManager.begin();
|
||||
I2CManager.setClock(100000L); // PCF8574 is spec'd to 100kHz.
|
||||
|
||||
_displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS;
|
||||
begin(_cols, _rows);
|
||||
if (I2CManager.exists(lcd_Addr)) {
|
||||
DIAG(F("%dx%d LCD configured on I2C:x%x"), (int)lcd_cols, (int)lcd_rows, (int)lcd_Addr);
|
||||
_displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS;
|
||||
begin();
|
||||
backlight();
|
||||
lcdDisplay = this;
|
||||
}
|
||||
}
|
||||
|
||||
void LiquidCrystal_I2C::begin(uint8_t cols, uint8_t lines) {
|
||||
if (lines > 1) {
|
||||
void LiquidCrystal_I2C::begin() {
|
||||
if (lcdRows > 1) {
|
||||
_displayfunction |= LCD_2LINE;
|
||||
}
|
||||
_numlines = lines;
|
||||
(void)cols; // Suppress compiler warning.
|
||||
|
||||
// according to datasheet, we need at least 40ms after power rises above 2.7V
|
||||
// before sending commands. Arduino can turn on way befer 4.5V so we'll allow
|
||||
// before sending commands. Arduino can turn on way before 4.5V so we'll allow
|
||||
// 100 milliseconds after pulling both RS and R/W and backlight pin low
|
||||
expanderWrite(
|
||||
_backlightval); // reset expander and turn backlight off (Bit 8 =1)
|
||||
@ -78,19 +78,19 @@ void LiquidCrystal_I2C::begin(uint8_t cols, uint8_t lines) {
|
||||
// figure 24, pg 46
|
||||
|
||||
// we start in 8bit mode, try to set 4 bit mode
|
||||
write4bits(0x03 << 4);
|
||||
write4bits(0x03);
|
||||
delayMicroseconds(4500); // wait min 4.1ms
|
||||
|
||||
// second try
|
||||
write4bits(0x03 << 4);
|
||||
write4bits(0x03);
|
||||
delayMicroseconds(4500); // wait min 4.1ms
|
||||
|
||||
// third go!
|
||||
write4bits(0x03 << 4);
|
||||
write4bits(0x03);
|
||||
delayMicroseconds(150);
|
||||
|
||||
// finally, set to 4-bit interface
|
||||
write4bits(0x02 << 4);
|
||||
write4bits(0x02);
|
||||
|
||||
// set # lines, font size, etc.
|
||||
command(LCD_FUNCTIONSET | _displayfunction);
|
||||
@ -108,27 +108,21 @@ void LiquidCrystal_I2C::begin(uint8_t cols, uint8_t lines) {
|
||||
// set the entry mode
|
||||
command(LCD_ENTRYMODESET | _displaymode);
|
||||
|
||||
setCursor(0, 0);
|
||||
setRowNative(0);
|
||||
}
|
||||
|
||||
/********** high level commands, for the user! */
|
||||
void LiquidCrystal_I2C::clear() {
|
||||
void LiquidCrystal_I2C::clearNative() {
|
||||
command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero
|
||||
delayMicroseconds(2000); // this command takes 1.52ms
|
||||
}
|
||||
|
||||
void LiquidCrystal_I2C::setCursor(uint8_t col, uint8_t row) {
|
||||
void LiquidCrystal_I2C::setRowNative(byte row) {
|
||||
int row_offsets[] = {0x00, 0x40, 0x14, 0x54};
|
||||
if (row > _numlines) {
|
||||
row = _numlines - 1; // we count rows starting w/0
|
||||
if (row > lcdRows) {
|
||||
row = lcdRows - 1; // we count rows starting w/0
|
||||
}
|
||||
command(LCD_SETDDRAMADDR | (col + row_offsets[row]));
|
||||
}
|
||||
|
||||
// Turn the display on/off (quickly)
|
||||
void LiquidCrystal_I2C::noDisplay() {
|
||||
_displaycontrol &= ~LCD_DISPLAYON;
|
||||
command(LCD_DISPLAYCONTROL | _displaycontrol);
|
||||
command(LCD_SETDDRAMADDR | (row_offsets[row]));
|
||||
}
|
||||
|
||||
void LiquidCrystal_I2C::display() {
|
||||
@ -138,7 +132,7 @@ void LiquidCrystal_I2C::display() {
|
||||
|
||||
// Turn the (optional) backlight off/on
|
||||
void LiquidCrystal_I2C::noBacklight(void) {
|
||||
_backlightval = LCD_NOBACKLIGHT;
|
||||
_backlightval &= ~LCD_BACKLIGHT;
|
||||
expanderWrite(0);
|
||||
}
|
||||
|
||||
@ -147,7 +141,7 @@ void LiquidCrystal_I2C::backlight(void) {
|
||||
expanderWrite(0);
|
||||
}
|
||||
|
||||
size_t LiquidCrystal_I2C::write(uint8_t value) {
|
||||
size_t LiquidCrystal_I2C::writeNative(uint8_t value) {
|
||||
send(value, Rs);
|
||||
return 1;
|
||||
}
|
||||
@ -194,25 +188,32 @@ inline void LiquidCrystal_I2C::command(uint8_t value) {
|
||||
// a single I2C transmission.
|
||||
void LiquidCrystal_I2C::send(uint8_t value, uint8_t mode) {
|
||||
mode |= _backlightval;
|
||||
uint8_t highnib = (value & 0xf0) | mode;
|
||||
uint8_t lownib = ((value << 4) & 0xf0) | mode;
|
||||
uint8_t highnib = (((value >> 4) & 0x0f) << BACKPACK_DATA_BITS) | mode;
|
||||
uint8_t lownib = ((value & 0x0f) << BACKPACK_DATA_BITS) | mode;
|
||||
// Send both nibbles
|
||||
byte buffer[] = {(byte)(highnib|En), highnib, (byte)(lownib|En), lownib};
|
||||
I2CManager.write(_Addr, buffer, sizeof(buffer));
|
||||
uint8_t len = 0;
|
||||
outputBuffer[len++] = highnib|En;
|
||||
outputBuffer[len++] = highnib;
|
||||
outputBuffer[len++] = lownib|En;
|
||||
outputBuffer[len++] = lownib;
|
||||
I2CManager.write(_Addr, outputBuffer, len);
|
||||
}
|
||||
|
||||
// write 4 bits to the HD44780 LCD controller.
|
||||
// write 4 data bits to the HD44780 LCD controller.
|
||||
void LiquidCrystal_I2C::write4bits(uint8_t value) {
|
||||
uint8_t _data = value | _backlightval;
|
||||
uint8_t _data = ((value & 0x0f) << BACKPACK_DATA_BITS) | _backlightval;
|
||||
// Enable must be set/reset for at least 450ns. This is well within the
|
||||
// I2C clock cycle time of 2.5us at 400kHz. Data is clocked in to the
|
||||
// HD44780 on the trailing edge of the Enable pin.
|
||||
byte buffer[] = {(byte)(_data|En), _data};
|
||||
I2CManager.write(_Addr, buffer, sizeof(buffer));
|
||||
uint8_t len = 0;
|
||||
outputBuffer[len++] = _data|En;
|
||||
outputBuffer[len++] = _data;
|
||||
I2CManager.write(_Addr, outputBuffer, len);
|
||||
}
|
||||
|
||||
// write a byte to the PCF8574 I2C interface. We don't need to set
|
||||
// the enable pin for this.
|
||||
void LiquidCrystal_I2C::expanderWrite(uint8_t value) {
|
||||
I2CManager.write(_Addr, 1, value | _backlightval);
|
||||
outputBuffer[0] = value | _backlightval;
|
||||
I2CManager.write(_Addr, outputBuffer, 1);
|
||||
}
|
||||
@ -22,13 +22,13 @@
|
||||
#define LiquidCrystal_I2C_h
|
||||
|
||||
#include <Arduino.h>
|
||||
#include "LCDDisplay.h"
|
||||
#include "I2CManager.h"
|
||||
|
||||
// commands
|
||||
#define LCD_CLEARDISPLAY 0x01
|
||||
#define LCD_RETURNHOME 0x02
|
||||
#define LCD_ENTRYMODESET 0x04
|
||||
#define LCD_DISPLAYCONTROL 0x08
|
||||
#define LCD_CURSORSHIFT 0x10
|
||||
#define LCD_FUNCTIONSET 0x20
|
||||
#define LCD_SETCGRAMADDR 0x40
|
||||
#define LCD_SETDDRAMADDR 0x80
|
||||
@ -41,46 +41,39 @@
|
||||
|
||||
// flags for display on/off control
|
||||
#define LCD_DISPLAYON 0x04
|
||||
#define LCD_DISPLAYOFF 0x00
|
||||
#define LCD_CURSORON 0x02
|
||||
#define LCD_CURSOROFF 0x00
|
||||
#define LCD_BLINKON 0x01
|
||||
#define LCD_BLINKOFF 0x00
|
||||
|
||||
// flags for display/cursor shift
|
||||
#define LCD_DISPLAYMOVE 0x08
|
||||
#define LCD_CURSORMOVE 0x00
|
||||
#define LCD_MOVERIGHT 0x04
|
||||
#define LCD_MOVELEFT 0x00
|
||||
|
||||
// flags for function set
|
||||
#define LCD_8BITMODE 0x10
|
||||
#define LCD_4BITMODE 0x00
|
||||
#define LCD_2LINE 0x08
|
||||
#define LCD_1LINE 0x00
|
||||
#define LCD_5x10DOTS 0x04
|
||||
#define LCD_5x8DOTS 0x00
|
||||
|
||||
// flags for backlight control
|
||||
#define LCD_BACKLIGHT 0x08
|
||||
#define LCD_NOBACKLIGHT 0x00
|
||||
// Bit mapping onto PCF8574 port
|
||||
#define BACKPACK_Rs_BIT 0
|
||||
#define BACKPACK_Rw_BIT 1
|
||||
#define BACKPACK_En_BIT 2
|
||||
#define BACKPACK_BACKLIGHT_BIT 3
|
||||
#define BACKPACK_DATA_BITS 4 // Bits 4-7
|
||||
// Equivalent mask bits
|
||||
#define LCD_BACKLIGHT (1 << BACKPACK_BACKLIGHT_BIT) // Backlight enable
|
||||
#define En (1 << BACKPACK_En_BIT) // Enable bit
|
||||
#define Rw (1 << BACKPACK_Rw_BIT) // Read/Write bit
|
||||
#define Rs (1 << BACKPACK_Rs_BIT) // Register select bit
|
||||
|
||||
#define En 0b00000100 // Enable bit
|
||||
#define Rw 0b00000010 // Read/Write bit
|
||||
#define Rs 0b00000001 // Register select bit
|
||||
|
||||
class LiquidCrystal_I2C : public Print {
|
||||
class LiquidCrystal_I2C : public LCDDisplay {
|
||||
public:
|
||||
LiquidCrystal_I2C(uint8_t lcd_Addr,uint8_t lcd_cols,uint8_t lcd_rows);
|
||||
void begin(uint8_t cols, uint8_t rows);
|
||||
void clear();
|
||||
void noDisplay();
|
||||
void begin();
|
||||
void clearNative();
|
||||
void setRowNative(byte line);
|
||||
size_t writeNative(uint8_t c);
|
||||
|
||||
void display();
|
||||
void noBacklight();
|
||||
void backlight();
|
||||
|
||||
void setCursor(uint8_t, uint8_t);
|
||||
virtual size_t write(uint8_t);
|
||||
void command(uint8_t);
|
||||
void init();
|
||||
|
||||
@ -93,10 +86,9 @@ private:
|
||||
uint8_t _displayfunction;
|
||||
uint8_t _displaycontrol;
|
||||
uint8_t _displaymode;
|
||||
uint8_t _numlines;
|
||||
uint8_t _cols;
|
||||
uint8_t _rows;
|
||||
uint8_t _backlightval;
|
||||
|
||||
uint8_t outputBuffer[4];
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
389
SSD1306Ascii.cpp
389
SSD1306Ascii.cpp
@ -21,90 +21,375 @@
|
||||
#include "I2CManager.h"
|
||||
#include "FSH.h"
|
||||
|
||||
//==============================================================================
|
||||
// SSD1306/SSD1106 I2C command bytes
|
||||
//------------------------------------------------------------------------------
|
||||
/** Set Lower Column Start Address for Page Addressing Mode. */
|
||||
static const uint8_t SSD1306_SETLOWCOLUMN = 0x00;
|
||||
/** Set Higher Column Start Address for Page Addressing Mode. */
|
||||
static const uint8_t SSD1306_SETHIGHCOLUMN = 0x10;
|
||||
/** Set Memory Addressing Mode. */
|
||||
static const uint8_t SSD1306_MEMORYMODE = 0x20;
|
||||
/** Set display RAM display start line register from 0 - 63. */
|
||||
static const uint8_t SSD1306_SETSTARTLINE = 0x40;
|
||||
/** Set Display Contrast to one of 256 steps. */
|
||||
static const uint8_t SSD1306_SETCONTRAST = 0x81;
|
||||
/** Enable or disable charge pump. Follow with 0X14 enable, 0X10 disable. */
|
||||
static const uint8_t SSD1306_CHARGEPUMP = 0x8D;
|
||||
/** Set Segment Re-map between data column and the segment driver. */
|
||||
static const uint8_t SSD1306_SEGREMAP = 0xA0;
|
||||
/** Resume display from GRAM content. */
|
||||
static const uint8_t SSD1306_DISPLAYALLON_RESUME = 0xA4;
|
||||
/** Force display on regardless of GRAM content. */
|
||||
static const uint8_t SSD1306_DISPLAYALLON = 0xA5;
|
||||
/** Set Normal Display. */
|
||||
static const uint8_t SSD1306_NORMALDISPLAY = 0xA6;
|
||||
/** Set Inverse Display. */
|
||||
static const uint8_t SSD1306_INVERTDISPLAY = 0xA7;
|
||||
/** Set Multiplex Ratio from 16 to 63. */
|
||||
static const uint8_t SSD1306_SETMULTIPLEX = 0xA8;
|
||||
/** Set Display off. */
|
||||
static const uint8_t SSD1306_DISPLAYOFF = 0xAE;
|
||||
/** Set Display on. */
|
||||
static const uint8_t SSD1306_DISPLAYON = 0xAF;
|
||||
/**Set GDDRAM Page Start Address. */
|
||||
static const uint8_t SSD1306_SETSTARTPAGE = 0xB0;
|
||||
/** Set COM output scan direction normal. */
|
||||
static const uint8_t SSD1306_COMSCANINC = 0xC0;
|
||||
/** Set COM output scan direction reversed. */
|
||||
static const uint8_t SSD1306_COMSCANDEC = 0xC8;
|
||||
/** Set Display Offset. */
|
||||
static const uint8_t SSD1306_SETDISPLAYOFFSET = 0xD3;
|
||||
/** Sets COM signals pin configuration to match the OLED panel layout. */
|
||||
static const uint8_t SSD1306_SETCOMPINS = 0xDA;
|
||||
/** This command adjusts the VCOMH regulator output. */
|
||||
static const uint8_t SSD1306_SETVCOMDETECT = 0xDB;
|
||||
/** Set Display Clock Divide Ratio/ Oscillator Frequency. */
|
||||
static const uint8_t SSD1306_SETDISPLAYCLOCKDIV = 0xD5;
|
||||
/** Set Pre-charge Period */
|
||||
static const uint8_t SSD1306_SETPRECHARGE = 0xD9;
|
||||
/** Deactivate scroll */
|
||||
static const uint8_t SSD1306_DEACTIVATE_SCROLL = 0x2E;
|
||||
/** No Operation Command. */
|
||||
static const uint8_t SSD1306_NOP = 0xE3;
|
||||
//------------------------------------------------------------------------------
|
||||
/** Set Pump voltage value: (30H~33H) 6.4, 7.4, 8.0 (POR), 9.0. */
|
||||
static const uint8_t SH1106_SET_PUMP_VOLTAGE = 0x30;
|
||||
/** First byte of set charge pump mode */
|
||||
static const uint8_t SH1106_SET_PUMP_MODE = 0xAD;
|
||||
/** Second byte charge pump on. */
|
||||
static const uint8_t SH1106_PUMP_ON = 0x8B;
|
||||
/** Second byte charge pump off. */
|
||||
static const uint8_t SH1106_PUMP_OFF = 0x8A;
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
// Maximum number of bytes we can send per transmission is 32.
|
||||
const uint8_t SSD1306AsciiWire::blankPixels[16] =
|
||||
// Sequence of blank pixels, to optimise clearing screen.
|
||||
// Send a maximum of 30 pixels per transmission.
|
||||
const uint8_t FLASH SSD1306AsciiWire::blankPixels[30] =
|
||||
{0x40, // First byte specifies data mode
|
||||
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
|
||||
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
|
||||
|
||||
//==============================================================================
|
||||
// SSD1306AsciiWire Method Definitions
|
||||
//------------------------------------------------------------------------------
|
||||
void SSD1306AsciiWire::clear() {
|
||||
clear(0, displayWidth() - 1, 0, displayRows() - 1);
|
||||
|
||||
// Constructor
|
||||
SSD1306AsciiWire::SSD1306AsciiWire(int width, int height) {
|
||||
// Set size in characters in base class
|
||||
lcdRows = height / 8;
|
||||
lcdCols = width / 6;
|
||||
|
||||
I2CManager.begin();
|
||||
I2CManager.setClock(400000L); // Set max supported I2C speed
|
||||
for (byte address = 0x3c; address <= 0x3d; address++) {
|
||||
if (I2CManager.exists(address)) {
|
||||
// Device found
|
||||
DIAG(F("%dx%d OLED display configured on I2C:x%x"), width, height, address);
|
||||
if (width == 132)
|
||||
begin(&SH1106_132x64, address);
|
||||
else if (height == 32)
|
||||
begin(&Adafruit128x32, address);
|
||||
else
|
||||
begin(&Adafruit128x64, address);
|
||||
// Set singleton address
|
||||
lcdDisplay = this;
|
||||
clear();
|
||||
return;
|
||||
}
|
||||
}
|
||||
DIAG(F("OLED display not found"));
|
||||
}
|
||||
//------------------------------------------------------------------------------
|
||||
void SSD1306AsciiWire::clear(uint8_t columnStart, uint8_t columnEnd,
|
||||
uint8_t rowStart, uint8_t rowEnd) {
|
||||
|
||||
/* Clear screen by writing blank pixels. */
|
||||
void SSD1306AsciiWire::clearNative() {
|
||||
const int maxBytes = sizeof(blankPixels); // max number of bytes sendable over Wire
|
||||
// Ensure only rows on display will be cleared.
|
||||
if (rowEnd >= displayRows()) rowEnd = displayRows() - 1;
|
||||
for (uint8_t r = rowStart; r <= rowEnd; r++) {
|
||||
setCursor(columnStart, r); // Position at start of row to be erased
|
||||
for (uint8_t c = columnStart; c <= columnEnd; c += maxBytes-1) {
|
||||
uint8_t len = min((uint8_t)(columnEnd-c+1), maxBytes-1) + 1;
|
||||
I2CManager.write(m_i2cAddr, blankPixels, len); // Write up to 15 blank columns
|
||||
for (uint8_t r = 0; r <= m_displayHeight/8 - 1; r++) {
|
||||
setRowNative(r); // Position at start of row to be erased
|
||||
for (uint8_t c = 0; c <= m_displayWidth - 1; c += maxBytes-1) {
|
||||
uint8_t len = min(m_displayWidth-c, maxBytes-1) + 1;
|
||||
I2CManager.write_P(m_i2cAddr, blankPixels, len); // Write a number of blank columns
|
||||
}
|
||||
}
|
||||
}
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
// Initialise device
|
||||
void SSD1306AsciiWire::begin(const DevType* dev, uint8_t i2cAddr) {
|
||||
m_i2cAddr = i2cAddr;
|
||||
m_col = 0;
|
||||
m_row = 0;
|
||||
#ifdef __AVR__
|
||||
const uint8_t* table = (const uint8_t*)pgm_read_word(&dev->initcmds);
|
||||
#else // __AVR__
|
||||
const uint8_t* table = dev->initcmds;
|
||||
#endif // __AVR
|
||||
uint8_t size = readFontByte(&dev->initSize);
|
||||
m_displayWidth = readFontByte(&dev->lcdWidth);
|
||||
m_displayHeight = readFontByte(&dev->lcdHeight);
|
||||
m_colOffset = readFontByte(&dev->colOffset);
|
||||
const uint8_t* table = (const uint8_t*)GETFLASHW(&dev->initcmds);
|
||||
uint8_t size = GETFLASH(&dev->initSize);
|
||||
m_displayWidth = GETFLASH(&dev->lcdWidth);
|
||||
m_displayHeight = GETFLASH(&dev->lcdHeight);
|
||||
m_colOffset = GETFLASH(&dev->colOffset);
|
||||
I2CManager.write_P(m_i2cAddr, table, size);
|
||||
if (m_displayHeight == 32)
|
||||
I2CManager.write(m_i2cAddr, 5, 0, // Set command mode
|
||||
SSD1306_SETMULTIPLEX, 0x1F, // ratio 32
|
||||
SSD1306_SETCOMPINS, 0x02); // sequential COM pins, disable remap
|
||||
}
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
void SSD1306AsciiWire::setContrast(uint8_t value) {
|
||||
I2CManager.write(m_i2cAddr, 2,
|
||||
0x00, // Set to command mode
|
||||
SSD1306_SETCONTRAST, value);
|
||||
}
|
||||
//------------------------------------------------------------------------------
|
||||
void SSD1306AsciiWire::setCursor(uint8_t col, uint8_t row) {
|
||||
if (row < displayRows() && col < m_displayWidth) {
|
||||
|
||||
// Set cursor position (by text line)
|
||||
void SSD1306AsciiWire::setRowNative(uint8_t line) {
|
||||
// Calculate pixel position from line number
|
||||
uint8_t row = line*8;
|
||||
if (row < m_displayHeight) {
|
||||
m_row = row;
|
||||
m_col = col + m_colOffset;
|
||||
I2CManager.write(m_i2cAddr, 4,
|
||||
0x00, // Set to command mode
|
||||
SSD1306_SETLOWCOLUMN | (col & 0XF),
|
||||
SSD1306_SETHIGHCOLUMN | (col >> 4),
|
||||
SSD1306_SETSTARTPAGE | m_row);
|
||||
m_col = m_colOffset;
|
||||
// Build output buffer for I2C
|
||||
uint8_t len = 0;
|
||||
outputBuffer[len++] = 0x00; // Set to command mode
|
||||
outputBuffer[len++] = SSD1306_SETLOWCOLUMN | (m_col & 0XF);
|
||||
outputBuffer[len++] = SSD1306_SETHIGHCOLUMN | (m_col >> 4);
|
||||
outputBuffer[len++] = SSD1306_SETSTARTPAGE | (m_row/8);
|
||||
I2CManager.write(m_i2cAddr, outputBuffer, len);
|
||||
}
|
||||
}
|
||||
//------------------------------------------------------------------------------
|
||||
void SSD1306AsciiWire::setFont(const uint8_t* font) {
|
||||
m_font = font;
|
||||
m_fontFirstChar = readFontByte(m_font + FONT_FIRST_CHAR);
|
||||
m_fontCharCount = readFontByte(m_font + FONT_CHAR_COUNT);
|
||||
}
|
||||
//------------------------------------------------------------------------------
|
||||
size_t SSD1306AsciiWire::write(uint8_t ch) {
|
||||
const uint8_t* base = m_font + FONT_WIDTH_TABLE;
|
||||
|
||||
// Write a character to the OLED
|
||||
size_t SSD1306AsciiWire::writeNative(uint8_t ch) {
|
||||
const uint8_t* base = m_font;
|
||||
|
||||
if (ch < m_fontFirstChar || ch >= (m_fontFirstChar + m_fontCharCount))
|
||||
return 0;
|
||||
// Check if character would be partly or wholly off the display
|
||||
if (m_col + fontWidth > m_displayWidth)
|
||||
return 0;
|
||||
#if defined(NOLOWERCASE)
|
||||
// Adjust if lowercase is missing
|
||||
if (ch >= 'a') {
|
||||
if (ch <= 'z')
|
||||
ch = ch - 'a' + 'A'; // Capitalise
|
||||
else
|
||||
ch -= 26; // Allow for missing lowercase letters
|
||||
}
|
||||
#endif
|
||||
ch -= m_fontFirstChar;
|
||||
base += fontWidth * ch;
|
||||
uint8_t buffer[1+fontWidth+letterSpacing];
|
||||
buffer[0] = 0x40; // set SSD1306 controller to data mode
|
||||
// Build output buffer for I2C
|
||||
outputBuffer[0] = 0x40; // set SSD1306 controller to data mode
|
||||
uint8_t bufferPos = 1;
|
||||
// Copy character pixel columns
|
||||
for (uint8_t i = 0; i < fontWidth; i++)
|
||||
buffer[bufferPos++] = readFontByte(base++);
|
||||
outputBuffer[bufferPos++] = GETFLASH(base++);
|
||||
// Add blank pixels between letters
|
||||
for (uint8_t i = 0; i < letterSpacing; i++)
|
||||
buffer[bufferPos++] = 0;
|
||||
outputBuffer[bufferPos++] = 0;
|
||||
|
||||
// Write the data to I2C display
|
||||
I2CManager.write(m_i2cAddr, buffer, bufferPos);
|
||||
I2CManager.write(m_i2cAddr, outputBuffer, bufferPos);
|
||||
m_col += fontWidth + letterSpacing;
|
||||
return 1;
|
||||
}
|
||||
|
||||
//==============================================================================
|
||||
// this section is based on https://github.com/adafruit/Adafruit_SSD1306
|
||||
|
||||
/** Initialization commands for a 128x32 or 128x64 SSD1306 oled display. */
|
||||
const uint8_t FLASH SSD1306AsciiWire::Adafruit128xXXinit[] = {
|
||||
// Init sequence for Adafruit 128x32/64 OLED module
|
||||
0x00, // Set to command mode
|
||||
SSD1306_DISPLAYOFF,
|
||||
SSD1306_SETDISPLAYCLOCKDIV, 0x80, // the suggested ratio 0x80
|
||||
SSD1306_SETMULTIPLEX, 0x3F, // ratio 64 (initially)
|
||||
SSD1306_SETDISPLAYOFFSET, 0x0, // no offset
|
||||
SSD1306_SETSTARTLINE | 0x0, // line #0
|
||||
SSD1306_CHARGEPUMP, 0x14, // internal vcc
|
||||
SSD1306_MEMORYMODE, 0x02, // page mode
|
||||
SSD1306_SEGREMAP | 0x1, // column 127 mapped to SEG0
|
||||
SSD1306_COMSCANDEC, // column scan direction reversed
|
||||
SSD1306_SETCOMPINS, 0X12, // set COM pins
|
||||
SSD1306_SETCONTRAST, 0x7F, // contrast level 127
|
||||
SSD1306_SETPRECHARGE, 0xF1, // pre-charge period (1, 15)
|
||||
SSD1306_SETVCOMDETECT, 0x40, // vcomh regulator level
|
||||
SSD1306_DISPLAYALLON_RESUME,
|
||||
SSD1306_NORMALDISPLAY,
|
||||
SSD1306_DISPLAYON
|
||||
};
|
||||
|
||||
/** Initialize a 128x32 SSD1306 oled display. */
|
||||
const DevType FLASH SSD1306AsciiWire::Adafruit128x32 = {
|
||||
Adafruit128xXXinit,
|
||||
sizeof(Adafruit128xXXinit),
|
||||
128,
|
||||
32,
|
||||
0
|
||||
};
|
||||
|
||||
/** Initialize a 128x64 oled display. */
|
||||
const DevType FLASH SSD1306AsciiWire::Adafruit128x64 = {
|
||||
Adafruit128xXXinit,
|
||||
sizeof(Adafruit128xXXinit),
|
||||
128,
|
||||
64,
|
||||
0
|
||||
};
|
||||
//------------------------------------------------------------------------------
|
||||
// This section is based on https://github.com/stanleyhuangyc/MultiLCD
|
||||
|
||||
/** Initialization commands for a 128x64 SH1106 oled display. */
|
||||
const uint8_t FLASH SSD1306AsciiWire::SH1106_132x64init[] = {
|
||||
0x00, // Set to command mode
|
||||
SSD1306_DISPLAYOFF,
|
||||
SSD1306_SETDISPLAYCLOCKDIV, 0X80, // set osc division
|
||||
SSD1306_SETMULTIPLEX, 0x3F, // ratio 64
|
||||
SSD1306_SETDISPLAYOFFSET, 0X00, // set display offset
|
||||
SSD1306_SETSTARTPAGE | 0X0, // set page address
|
||||
SSD1306_SETSTARTLINE | 0x0, // set start line
|
||||
SH1106_SET_PUMP_MODE, SH1106_PUMP_ON, // set charge pump enable
|
||||
SSD1306_SEGREMAP | 0X1, // set segment remap
|
||||
SSD1306_COMSCANDEC, // Com scan direction
|
||||
SSD1306_SETCOMPINS, 0X12, // set COM pins
|
||||
SSD1306_SETCONTRAST, 0x80, // 128
|
||||
SSD1306_SETPRECHARGE, 0X1F, // set pre-charge period
|
||||
SSD1306_SETVCOMDETECT, 0x40, // set vcomh
|
||||
SH1106_SET_PUMP_VOLTAGE | 0X2, // 8.0 volts
|
||||
SSD1306_NORMALDISPLAY, // normal / reverse
|
||||
SSD1306_DISPLAYON
|
||||
};
|
||||
|
||||
/** Initialize a 132x64 oled SH1106 display. */
|
||||
const DevType FLASH SSD1306AsciiWire::SH1106_132x64 = {
|
||||
SH1106_132x64init,
|
||||
sizeof(SH1106_132x64init),
|
||||
128,
|
||||
64,
|
||||
2 // SH1106 is a 132x64 controller but most OLEDs are only attached
|
||||
// to columns 2-129.
|
||||
};
|
||||
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
// Font characters, 5x7 pixels, 0x61 characters starting at 0x20.
|
||||
// Lower case characters optionally omitted.
|
||||
const uint8_t FLASH SSD1306AsciiWire::System5x7[] = {
|
||||
|
||||
// Fixed width; char width table not used !!!!
|
||||
// or with lowercase character omitted.
|
||||
|
||||
// font data
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, // (space)
|
||||
0x00, 0x00, 0x5F, 0x00, 0x00, // !
|
||||
0x00, 0x07, 0x00, 0x07, 0x00, // "
|
||||
0x14, 0x7F, 0x14, 0x7F, 0x14, // #
|
||||
0x24, 0x2A, 0x7F, 0x2A, 0x12, // $
|
||||
0x23, 0x13, 0x08, 0x64, 0x62, // %
|
||||
0x36, 0x49, 0x55, 0x22, 0x50, // &
|
||||
0x00, 0x05, 0x03, 0x00, 0x00, // '
|
||||
0x00, 0x1C, 0x22, 0x41, 0x00, // (
|
||||
0x00, 0x41, 0x22, 0x1C, 0x00, // )
|
||||
0x08, 0x2A, 0x1C, 0x2A, 0x08, // *
|
||||
0x08, 0x08, 0x3E, 0x08, 0x08, // +
|
||||
0x00, 0x50, 0x30, 0x00, 0x00, // ,
|
||||
0x08, 0x08, 0x08, 0x08, 0x08, // -
|
||||
0x00, 0x60, 0x60, 0x00, 0x00, // .
|
||||
0x20, 0x10, 0x08, 0x04, 0x02, // /
|
||||
0x3E, 0x51, 0x49, 0x45, 0x3E, // 0
|
||||
0x00, 0x42, 0x7F, 0x40, 0x00, // 1
|
||||
0x42, 0x61, 0x51, 0x49, 0x46, // 2
|
||||
0x21, 0x41, 0x45, 0x4B, 0x31, // 3
|
||||
0x18, 0x14, 0x12, 0x7F, 0x10, // 4
|
||||
0x27, 0x45, 0x45, 0x45, 0x39, // 5
|
||||
0x3C, 0x4A, 0x49, 0x49, 0x30, // 6
|
||||
0x01, 0x71, 0x09, 0x05, 0x03, // 7
|
||||
0x36, 0x49, 0x49, 0x49, 0x36, // 8
|
||||
0x06, 0x49, 0x49, 0x29, 0x1E, // 9
|
||||
0x00, 0x36, 0x36, 0x00, 0x00, // :
|
||||
0x00, 0x56, 0x36, 0x00, 0x00, // ;
|
||||
0x00, 0x08, 0x14, 0x22, 0x41, // <
|
||||
0x14, 0x14, 0x14, 0x14, 0x14, // =
|
||||
0x41, 0x22, 0x14, 0x08, 0x00, // >
|
||||
0x02, 0x01, 0x51, 0x09, 0x06, // ?
|
||||
0x32, 0x49, 0x79, 0x41, 0x3E, // @
|
||||
0x7E, 0x11, 0x11, 0x11, 0x7E, // A
|
||||
0x7F, 0x49, 0x49, 0x49, 0x36, // B
|
||||
0x3E, 0x41, 0x41, 0x41, 0x22, // C
|
||||
0x7F, 0x41, 0x41, 0x22, 0x1C, // D
|
||||
0x7F, 0x49, 0x49, 0x49, 0x41, // E
|
||||
0x7F, 0x09, 0x09, 0x01, 0x01, // F
|
||||
0x3E, 0x41, 0x41, 0x51, 0x32, // G
|
||||
0x7F, 0x08, 0x08, 0x08, 0x7F, // H
|
||||
0x00, 0x41, 0x7F, 0x41, 0x00, // I
|
||||
0x20, 0x40, 0x41, 0x3F, 0x01, // J
|
||||
0x7F, 0x08, 0x14, 0x22, 0x41, // K
|
||||
0x7F, 0x40, 0x40, 0x40, 0x40, // L
|
||||
0x7F, 0x02, 0x04, 0x02, 0x7F, // M
|
||||
0x7F, 0x04, 0x08, 0x10, 0x7F, // N
|
||||
0x3E, 0x41, 0x41, 0x41, 0x3E, // O
|
||||
0x7F, 0x09, 0x09, 0x09, 0x06, // P
|
||||
0x3E, 0x41, 0x51, 0x21, 0x5E, // Q
|
||||
0x7F, 0x09, 0x19, 0x29, 0x46, // R
|
||||
0x46, 0x49, 0x49, 0x49, 0x31, // S
|
||||
0x01, 0x01, 0x7F, 0x01, 0x01, // T
|
||||
0x3F, 0x40, 0x40, 0x40, 0x3F, // U
|
||||
0x1F, 0x20, 0x40, 0x20, 0x1F, // V
|
||||
0x7F, 0x20, 0x18, 0x20, 0x7F, // W
|
||||
0x63, 0x14, 0x08, 0x14, 0x63, // X
|
||||
0x03, 0x04, 0x78, 0x04, 0x03, // Y
|
||||
0x61, 0x51, 0x49, 0x45, 0x43, // Z
|
||||
0x00, 0x00, 0x7F, 0x41, 0x41, // [
|
||||
0x02, 0x04, 0x08, 0x10, 0x20, // "\"
|
||||
0x41, 0x41, 0x7F, 0x00, 0x00, // ]
|
||||
0x04, 0x02, 0x01, 0x02, 0x04, // ^
|
||||
0x40, 0x40, 0x40, 0x40, 0x40, // _
|
||||
0x00, 0x01, 0x02, 0x04, 0x00, // `
|
||||
#ifndef NOLOWERCASE
|
||||
0x20, 0x54, 0x54, 0x54, 0x78, // a
|
||||
0x7F, 0x48, 0x44, 0x44, 0x38, // b
|
||||
0x38, 0x44, 0x44, 0x44, 0x20, // c
|
||||
0x38, 0x44, 0x44, 0x48, 0x7F, // d
|
||||
0x38, 0x54, 0x54, 0x54, 0x18, // e
|
||||
0x08, 0x7E, 0x09, 0x01, 0x02, // f
|
||||
0x08, 0x14, 0x54, 0x54, 0x3C, // g
|
||||
0x7F, 0x08, 0x04, 0x04, 0x78, // h
|
||||
0x00, 0x44, 0x7D, 0x40, 0x00, // i
|
||||
0x20, 0x40, 0x44, 0x3D, 0x00, // j
|
||||
0x00, 0x7F, 0x10, 0x28, 0x44, // k
|
||||
0x00, 0x41, 0x7F, 0x40, 0x00, // l
|
||||
0x7C, 0x04, 0x18, 0x04, 0x78, // m
|
||||
0x7C, 0x08, 0x04, 0x04, 0x78, // n
|
||||
0x38, 0x44, 0x44, 0x44, 0x38, // o
|
||||
0x7C, 0x14, 0x14, 0x14, 0x08, // p
|
||||
0x08, 0x14, 0x14, 0x18, 0x7C, // q
|
||||
0x7C, 0x08, 0x04, 0x04, 0x08, // r
|
||||
0x48, 0x54, 0x54, 0x54, 0x20, // s
|
||||
0x04, 0x3F, 0x44, 0x40, 0x20, // t
|
||||
0x3C, 0x40, 0x40, 0x20, 0x7C, // u
|
||||
0x1C, 0x20, 0x40, 0x20, 0x1C, // v
|
||||
0x3C, 0x40, 0x30, 0x40, 0x3C, // w
|
||||
0x44, 0x28, 0x10, 0x28, 0x44, // x
|
||||
0x0C, 0x50, 0x50, 0x50, 0x3C, // y
|
||||
0x44, 0x64, 0x54, 0x4C, 0x44, // z
|
||||
#endif
|
||||
0x00, 0x08, 0x36, 0x41, 0x00, // {
|
||||
0x00, 0x00, 0x7F, 0x00, 0x00, // |
|
||||
0x00, 0x41, 0x36, 0x08, 0x00, // }
|
||||
0x08, 0x08, 0x2A, 0x1C, 0x08, // ->
|
||||
0x08, 0x1C, 0x2A, 0x08, 0x08, // <-
|
||||
0x00, 0x06, 0x09, 0x09, 0x06 // degree symbol
|
||||
|
||||
};
|
||||
|
||||
124
SSD1306Ascii.h
124
SSD1306Ascii.h
@ -22,78 +22,88 @@
|
||||
#define SSD1306Ascii_h
|
||||
|
||||
#include "Arduino.h"
|
||||
#include "SSD1306font.h"
|
||||
#include "SSD1306init.h"
|
||||
#include "FSH.h"
|
||||
#include "LCDDisplay.h"
|
||||
|
||||
class SSD1306AsciiWire : public Print {
|
||||
#include "I2CManager.h"
|
||||
#include "DIAG.h"
|
||||
|
||||
// Uncomment to remove lower-case letters to save 108 bytes of flash
|
||||
//#define NOLOWERCASE
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
// Device initialization structure.
|
||||
|
||||
struct DevType {
|
||||
/* Pointer to initialization command bytes. */
|
||||
const uint8_t* initcmds;
|
||||
/* Number of initialization bytes */
|
||||
const uint8_t initSize;
|
||||
/* Width of the display in pixels */
|
||||
const uint8_t lcdWidth;
|
||||
/** Height of the display in pixels. */
|
||||
const uint8_t lcdHeight;
|
||||
/* Column offset RAM to display. Used to pick start column of SH1106. */
|
||||
const uint8_t colOffset;
|
||||
};
|
||||
|
||||
// Constructor
|
||||
class SSD1306AsciiWire : public LCDDisplay {
|
||||
public:
|
||||
using Print::write;
|
||||
SSD1306AsciiWire() {}
|
||||
|
||||
// Constructor
|
||||
SSD1306AsciiWire(int width, int height);
|
||||
|
||||
// Initialize the display controller.
|
||||
void begin(const DevType* dev, uint8_t i2cAddr);
|
||||
|
||||
// Clear the display and set the cursor to (0, 0).
|
||||
void clear();
|
||||
// Clear a region of the display.
|
||||
void clear(uint8_t c0, uint8_t c1, uint8_t r0, uint8_t r1);
|
||||
// The current column in pixels.
|
||||
inline uint8_t col() const { return m_col; }
|
||||
// The display hight in pixels.
|
||||
inline uint8_t displayHeight() const { return m_displayHeight; }
|
||||
// The display height in rows with eight pixels to a row.
|
||||
inline uint8_t displayRows() const { return m_displayHeight / 8; }
|
||||
// The display width in pixels.
|
||||
inline uint8_t displayWidth() const { return m_displayWidth; }
|
||||
// Set the cursor position to (0, 0).
|
||||
inline void home() { setCursor(0, 0); }
|
||||
void clearNative();
|
||||
|
||||
// Set cursor to start of specified text line
|
||||
void setRowNative(byte line);
|
||||
|
||||
// Initialize the display controller.
|
||||
void init(const DevType* dev);
|
||||
// the current row number with eight pixels to a row.
|
||||
inline uint8_t row() const { return m_row; }
|
||||
/**
|
||||
* @brief Set the display contrast.
|
||||
*
|
||||
* @param[in] value The contrast level in th range 0 to 255.
|
||||
*/
|
||||
void setContrast(uint8_t value);
|
||||
/**
|
||||
* @brief Set the cursor position.
|
||||
*
|
||||
* @param[in] col The column number in pixels.
|
||||
* @param[in] row the row number in eight pixel rows.
|
||||
*/
|
||||
void setCursor(uint8_t col, uint8_t row);
|
||||
/**
|
||||
* @brief Set the current font.
|
||||
*
|
||||
* @param[in] font Pointer to a font table.
|
||||
*/
|
||||
void setFont(const uint8_t* font);
|
||||
/**
|
||||
* @brief Display a character.
|
||||
*
|
||||
* @param[in] c The character to display.
|
||||
* @return one for success else zero.
|
||||
*/
|
||||
size_t write(uint8_t c);
|
||||
|
||||
// Write one character to OLED
|
||||
size_t writeNative(uint8_t c);
|
||||
|
||||
// Display characteristics / initialisation
|
||||
static const DevType FLASH Adafruit128x32;
|
||||
static const DevType FLASH Adafruit128x64;
|
||||
static const DevType FLASH SH1106_132x64;
|
||||
|
||||
private:
|
||||
uint8_t m_col; // Cursor column.
|
||||
uint8_t m_row; // Cursor RAM row.
|
||||
uint8_t m_displayWidth; // Display width.
|
||||
uint8_t m_displayHeight; // Display height.
|
||||
uint8_t m_colOffset; // Column offset RAM to SEG.
|
||||
const uint8_t* m_font = NULL; // Current font.
|
||||
// Cursor column.
|
||||
uint8_t m_col;
|
||||
// Cursor RAM row.
|
||||
uint8_t m_row;
|
||||
// Display width.
|
||||
uint8_t m_displayWidth;
|
||||
// Display height.
|
||||
uint8_t m_displayHeight;
|
||||
// Column offset RAM to SEG.
|
||||
uint8_t m_colOffset = 0;
|
||||
// Current font.
|
||||
const uint8_t* const m_font = System5x7;
|
||||
|
||||
// Only fixed size 5x7 fonts in a 6x8 cell are supported.
|
||||
const uint8_t fontWidth = 5;
|
||||
const uint8_t fontHeight = 7;
|
||||
const uint8_t letterSpacing = 1;
|
||||
uint8_t m_fontFirstChar;
|
||||
uint8_t m_fontCharCount;
|
||||
static const uint8_t fontWidth = 5;
|
||||
static const uint8_t fontHeight = 7;
|
||||
static const uint8_t letterSpacing = 1;
|
||||
static const uint8_t m_fontFirstChar = 0x20;
|
||||
static const uint8_t m_fontCharCount = 0x61;
|
||||
|
||||
uint8_t m_i2cAddr;
|
||||
|
||||
uint8_t outputBuffer[fontWidth+letterSpacing+1];
|
||||
|
||||
static const uint8_t blankPixels[];
|
||||
|
||||
static const uint8_t System5x7[];
|
||||
static const uint8_t FLASH Adafruit128xXXinit[];
|
||||
static const uint8_t FLASH SH1106_132x64init[];
|
||||
};
|
||||
|
||||
#endif // SSD1306Ascii_h
|
||||
|
||||
196
SSD1306font.h
196
SSD1306font.h
@ -1,196 +0,0 @@
|
||||
/* Based on Arduino SSD1306Ascii Library, Copyright (C) 2015 by William Greiman
|
||||
* Modifications (C) 2021 Neil McKechnie
|
||||
*
|
||||
* This file is part of CommandStation-EX
|
||||
*
|
||||
* This Library is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This Library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
/*
|
||||
*
|
||||
* System5x7
|
||||
*
|
||||
*
|
||||
* File Name : System5x7.h
|
||||
* Date : 28 Oct 2008
|
||||
* Font size in bytes : 470
|
||||
* Font width : 5
|
||||
* Font height : 7
|
||||
* Font first char : 32
|
||||
* Font last char : 127
|
||||
* Font used chars : 94
|
||||
*
|
||||
* The font data are defined as
|
||||
*
|
||||
* struct _FONT_ {
|
||||
* uint16_t font_Size_in_Bytes_over_all_included_Size_it_self;
|
||||
* uint8_t font_Width_in_Pixel_for_fixed_drawing;
|
||||
* uint8_t font_Height_in_Pixel_for_all_characters;
|
||||
* unit8_t font_First_Char;
|
||||
* uint8_t font_Char_Count;
|
||||
*
|
||||
* uint8_t font_Char_Widths[font_Last_Char - font_First_Char +1];
|
||||
* // for each character the separate width in pixels,
|
||||
* // characters < 128 have an implicit virtual right empty row
|
||||
*
|
||||
* uint8_t font_data[];
|
||||
* // bit field of all characters
|
||||
*/
|
||||
|
||||
#ifndef SSD1306font_H
|
||||
#define SSD1306font_H
|
||||
|
||||
#define SYSTEM5x7_WIDTH 5
|
||||
#define SYSTEM5x7_HEIGHT 7
|
||||
|
||||
#ifdef __AVR__
|
||||
#include <avr/pgmspace.h>
|
||||
/** declare a font for AVR. */
|
||||
#define GLCDFONTDECL(_n) static const uint8_t __attribute__((progmem)) _n[]
|
||||
#define readFontByte(addr) pgm_read_byte(addr)
|
||||
#else // __AVR__
|
||||
/** declare a font. */
|
||||
#define GLCDFONTDECL(_n) static const uint8_t _n[]
|
||||
/** Fake read from flash. */
|
||||
#define readFontByte(addr) (*(const unsigned char *)(addr))
|
||||
#endif // __AVR__
|
||||
//------------------------------------------------------------------------------
|
||||
// Font Indices
|
||||
/** No longer used Big Endian length field. Now indicates font type.
|
||||
*
|
||||
* 00 00 (fixed width font with 1 padding pixel on right and below)
|
||||
*
|
||||
* 00 01 (fixed width font with no padding pixels)
|
||||
*/
|
||||
#define FONT_LENGTH 0
|
||||
/** Maximum character width. */
|
||||
#define FONT_WIDTH 2
|
||||
/** Font hight in pixels */
|
||||
#define FONT_HEIGHT 3
|
||||
/** Ascii value of first character */
|
||||
#define FONT_FIRST_CHAR 4
|
||||
/** count of characters in font. */
|
||||
#define FONT_CHAR_COUNT 5
|
||||
/** Offset to width table. */
|
||||
#define FONT_WIDTH_TABLE 6
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
GLCDFONTDECL(System5x7) = {
|
||||
0x0, 0x0, // size of zero indicates fixed width font,
|
||||
0x05, // width
|
||||
0x07, // height
|
||||
0x20, // first char
|
||||
0x61, // char count
|
||||
|
||||
// Fixed width; char width table not used !!!!
|
||||
|
||||
// font data
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, // (space)
|
||||
0x00, 0x00, 0x5F, 0x00, 0x00, // !
|
||||
0x00, 0x07, 0x00, 0x07, 0x00, // "
|
||||
0x14, 0x7F, 0x14, 0x7F, 0x14, // #
|
||||
0x24, 0x2A, 0x7F, 0x2A, 0x12, // $
|
||||
0x23, 0x13, 0x08, 0x64, 0x62, // %
|
||||
0x36, 0x49, 0x55, 0x22, 0x50, // &
|
||||
0x00, 0x05, 0x03, 0x00, 0x00, // '
|
||||
0x00, 0x1C, 0x22, 0x41, 0x00, // (
|
||||
0x00, 0x41, 0x22, 0x1C, 0x00, // )
|
||||
0x08, 0x2A, 0x1C, 0x2A, 0x08, // *
|
||||
0x08, 0x08, 0x3E, 0x08, 0x08, // +
|
||||
0x00, 0x50, 0x30, 0x00, 0x00, // ,
|
||||
0x08, 0x08, 0x08, 0x08, 0x08, // -
|
||||
0x00, 0x60, 0x60, 0x00, 0x00, // .
|
||||
0x20, 0x10, 0x08, 0x04, 0x02, // /
|
||||
0x3E, 0x51, 0x49, 0x45, 0x3E, // 0
|
||||
0x00, 0x42, 0x7F, 0x40, 0x00, // 1
|
||||
0x42, 0x61, 0x51, 0x49, 0x46, // 2
|
||||
0x21, 0x41, 0x45, 0x4B, 0x31, // 3
|
||||
0x18, 0x14, 0x12, 0x7F, 0x10, // 4
|
||||
0x27, 0x45, 0x45, 0x45, 0x39, // 5
|
||||
0x3C, 0x4A, 0x49, 0x49, 0x30, // 6
|
||||
0x01, 0x71, 0x09, 0x05, 0x03, // 7
|
||||
0x36, 0x49, 0x49, 0x49, 0x36, // 8
|
||||
0x06, 0x49, 0x49, 0x29, 0x1E, // 9
|
||||
0x00, 0x36, 0x36, 0x00, 0x00, // :
|
||||
0x00, 0x56, 0x36, 0x00, 0x00, // ;
|
||||
0x00, 0x08, 0x14, 0x22, 0x41, // <
|
||||
0x14, 0x14, 0x14, 0x14, 0x14, // =
|
||||
0x41, 0x22, 0x14, 0x08, 0x00, // >
|
||||
0x02, 0x01, 0x51, 0x09, 0x06, // ?
|
||||
0x32, 0x49, 0x79, 0x41, 0x3E, // @
|
||||
0x7E, 0x11, 0x11, 0x11, 0x7E, // A
|
||||
0x7F, 0x49, 0x49, 0x49, 0x36, // B
|
||||
0x3E, 0x41, 0x41, 0x41, 0x22, // C
|
||||
0x7F, 0x41, 0x41, 0x22, 0x1C, // D
|
||||
0x7F, 0x49, 0x49, 0x49, 0x41, // E
|
||||
0x7F, 0x09, 0x09, 0x01, 0x01, // F
|
||||
0x3E, 0x41, 0x41, 0x51, 0x32, // G
|
||||
0x7F, 0x08, 0x08, 0x08, 0x7F, // H
|
||||
0x00, 0x41, 0x7F, 0x41, 0x00, // I
|
||||
0x20, 0x40, 0x41, 0x3F, 0x01, // J
|
||||
0x7F, 0x08, 0x14, 0x22, 0x41, // K
|
||||
0x7F, 0x40, 0x40, 0x40, 0x40, // L
|
||||
0x7F, 0x02, 0x04, 0x02, 0x7F, // M
|
||||
0x7F, 0x04, 0x08, 0x10, 0x7F, // N
|
||||
0x3E, 0x41, 0x41, 0x41, 0x3E, // O
|
||||
0x7F, 0x09, 0x09, 0x09, 0x06, // P
|
||||
0x3E, 0x41, 0x51, 0x21, 0x5E, // Q
|
||||
0x7F, 0x09, 0x19, 0x29, 0x46, // R
|
||||
0x46, 0x49, 0x49, 0x49, 0x31, // S
|
||||
0x01, 0x01, 0x7F, 0x01, 0x01, // T
|
||||
0x3F, 0x40, 0x40, 0x40, 0x3F, // U
|
||||
0x1F, 0x20, 0x40, 0x20, 0x1F, // V
|
||||
0x7F, 0x20, 0x18, 0x20, 0x7F, // W
|
||||
0x63, 0x14, 0x08, 0x14, 0x63, // X
|
||||
0x03, 0x04, 0x78, 0x04, 0x03, // Y
|
||||
0x61, 0x51, 0x49, 0x45, 0x43, // Z
|
||||
0x00, 0x00, 0x7F, 0x41, 0x41, // [
|
||||
0x02, 0x04, 0x08, 0x10, 0x20, // "\"
|
||||
0x41, 0x41, 0x7F, 0x00, 0x00, // ]
|
||||
0x04, 0x02, 0x01, 0x02, 0x04, // ^
|
||||
0x40, 0x40, 0x40, 0x40, 0x40, // _
|
||||
0x00, 0x01, 0x02, 0x04, 0x00, // `
|
||||
0x20, 0x54, 0x54, 0x54, 0x78, // a
|
||||
0x7F, 0x48, 0x44, 0x44, 0x38, // b
|
||||
0x38, 0x44, 0x44, 0x44, 0x20, // c
|
||||
0x38, 0x44, 0x44, 0x48, 0x7F, // d
|
||||
0x38, 0x54, 0x54, 0x54, 0x18, // e
|
||||
0x08, 0x7E, 0x09, 0x01, 0x02, // f
|
||||
0x08, 0x14, 0x54, 0x54, 0x3C, // g
|
||||
0x7F, 0x08, 0x04, 0x04, 0x78, // h
|
||||
0x00, 0x44, 0x7D, 0x40, 0x00, // i
|
||||
0x20, 0x40, 0x44, 0x3D, 0x00, // j
|
||||
0x00, 0x7F, 0x10, 0x28, 0x44, // k
|
||||
0x00, 0x41, 0x7F, 0x40, 0x00, // l
|
||||
0x7C, 0x04, 0x18, 0x04, 0x78, // m
|
||||
0x7C, 0x08, 0x04, 0x04, 0x78, // n
|
||||
0x38, 0x44, 0x44, 0x44, 0x38, // o
|
||||
0x7C, 0x14, 0x14, 0x14, 0x08, // p
|
||||
0x08, 0x14, 0x14, 0x18, 0x7C, // q
|
||||
0x7C, 0x08, 0x04, 0x04, 0x08, // r
|
||||
0x48, 0x54, 0x54, 0x54, 0x20, // s
|
||||
0x04, 0x3F, 0x44, 0x40, 0x20, // t
|
||||
0x3C, 0x40, 0x40, 0x20, 0x7C, // u
|
||||
0x1C, 0x20, 0x40, 0x20, 0x1C, // v
|
||||
0x3C, 0x40, 0x30, 0x40, 0x3C, // w
|
||||
0x44, 0x28, 0x10, 0x28, 0x44, // x
|
||||
0x0C, 0x50, 0x50, 0x50, 0x3C, // y
|
||||
0x44, 0x64, 0x54, 0x4C, 0x44, // z
|
||||
0x00, 0x08, 0x36, 0x41, 0x00, // {
|
||||
0x00, 0x00, 0x7F, 0x00, 0x00, // |
|
||||
0x00, 0x41, 0x36, 0x08, 0x00, // }
|
||||
0x08, 0x08, 0x2A, 0x1C, 0x08, // ->
|
||||
0x08, 0x1C, 0x2A, 0x08, 0x08, // <-
|
||||
0x00, 0x06, 0x09, 0x09, 0x06 // degree symbol
|
||||
|
||||
};
|
||||
|
||||
#endif
|
||||
209
SSD1306init.h
209
SSD1306init.h
@ -1,209 +0,0 @@
|
||||
/* Based on Arduino SSD1306Ascii Library, Copyright (C) 2015 by William Greiman
|
||||
* Modifications (C) 2021 Neil McKechnie
|
||||
*
|
||||
* This file is part of CommandStation-EX
|
||||
*
|
||||
* This Library is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This Library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with the Arduino SSD1306Ascii Library. If not, see
|
||||
* <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
/**
|
||||
* @file SSD1306init.h
|
||||
* @brief Display controller initialization commands.
|
||||
*/
|
||||
#ifndef SSD1306init_h
|
||||
#define SSD1306init_h
|
||||
//------------------------------------------------------------------------------
|
||||
#ifndef __AVR__
|
||||
/** Handle AVR flash addressing. */
|
||||
#define MEM_TYPE
|
||||
#else // __AVR__
|
||||
#define MEM_TYPE __attribute__ ((progmem))
|
||||
#endif // __AVR__
|
||||
//------------------------------------------------------------------------------
|
||||
/** Set Lower Column Start Address for Page Addressing Mode. */
|
||||
#define SSD1306_SETLOWCOLUMN 0x00
|
||||
/** Set Higher Column Start Address for Page Addressing Mode. */
|
||||
#define SSD1306_SETHIGHCOLUMN 0x10
|
||||
/** Set Memory Addressing Mode. */
|
||||
#define SSD1306_MEMORYMODE 0x20
|
||||
/** Set display RAM display start line register from 0 - 63. */
|
||||
#define SSD1306_SETSTARTLINE 0x40
|
||||
/** Set Display Contrast to one of 256 steps. */
|
||||
#define SSD1306_SETCONTRAST 0x81
|
||||
/** Enable or disable charge pump. Follow with 0X14 enable, 0X10 disable. */
|
||||
#define SSD1306_CHARGEPUMP 0x8D
|
||||
/** Set Segment Re-map between data column and the segment driver. */
|
||||
#define SSD1306_SEGREMAP 0xA0
|
||||
/** Resume display from GRAM content. */
|
||||
#define SSD1306_DISPLAYALLON_RESUME 0xA4
|
||||
/** Force display on regardless of GRAM content. */
|
||||
#define SSD1306_DISPLAYALLON 0xA5
|
||||
/** Set Normal Display. */
|
||||
#define SSD1306_NORMALDISPLAY 0xA6
|
||||
/** Set Inverse Display. */
|
||||
#define SSD1306_INVERTDISPLAY 0xA7
|
||||
/** Set Multiplex Ratio from 16 to 63. */
|
||||
#define SSD1306_SETMULTIPLEX 0xA8
|
||||
/** Set Display off. */
|
||||
#define SSD1306_DISPLAYOFF 0xAE
|
||||
/** Set Display on. */
|
||||
#define SSD1306_DISPLAYON 0xAF
|
||||
/**Set GDDRAM Page Start Address. */
|
||||
#define SSD1306_SETSTARTPAGE 0XB0
|
||||
/** Set COM output scan direction normal. */
|
||||
#define SSD1306_COMSCANINC 0xC0
|
||||
/** Set COM output scan direction reversed. */
|
||||
#define SSD1306_COMSCANDEC 0xC8
|
||||
/** Set Display Offset. */
|
||||
#define SSD1306_SETDISPLAYOFFSET 0xD3
|
||||
/** Sets COM signals pin configuration to match the OLED panel layout. */
|
||||
#define SSD1306_SETCOMPINS 0xDA
|
||||
/** This command adjusts the VCOMH regulator output. */
|
||||
#define SSD1306_SETVCOMDETECT 0xDB
|
||||
/** Set Display Clock Divide Ratio/ Oscillator Frequency. */
|
||||
#define SSD1306_SETDISPLAYCLOCKDIV 0xD5
|
||||
/** Set Pre-charge Period */
|
||||
#define SSD1306_SETPRECHARGE 0xD9
|
||||
/** Deactivate scroll */
|
||||
#define SSD1306_DEACTIVATE_SCROLL 0x2E
|
||||
/** No Operation Command. */
|
||||
#define SSD1306_NOP 0XE3
|
||||
//------------------------------------------------------------------------------
|
||||
/** Set Pump voltage value: (30H~33H) 6.4, 7.4, 8.0 (POR), 9.0. */
|
||||
#define SH1106_SET_PUMP_VOLTAGE 0X30
|
||||
/** First byte of set charge pump mode */
|
||||
#define SH1106_SET_PUMP_MODE 0XAD
|
||||
/** Second byte charge pump on. */
|
||||
#define SH1106_PUMP_ON 0X8B
|
||||
/** Second byte charge pump off. */
|
||||
#define SH1106_PUMP_OFF 0X8A
|
||||
//------------------------------------------------------------------------------
|
||||
/**
|
||||
* @struct DevType
|
||||
* @brief Device initialization structure.
|
||||
*/
|
||||
struct DevType {
|
||||
/**
|
||||
* Pointer to initialization command bytes.
|
||||
*/
|
||||
const uint8_t* initcmds;
|
||||
/**
|
||||
* Number of initialization bytes.
|
||||
*/
|
||||
const uint8_t initSize;
|
||||
/**
|
||||
* Width of the diaplay in pixels.
|
||||
*/
|
||||
const uint8_t lcdWidth;
|
||||
/**
|
||||
* Height of the display in pixels.
|
||||
*/
|
||||
const uint8_t lcdHeight;
|
||||
/**
|
||||
* Column offset RAM to display. Used to pick start column of SH1106.
|
||||
*/
|
||||
const uint8_t colOffset;
|
||||
};
|
||||
//------------------------------------------------------------------------------
|
||||
// this section is based on https://github.com/adafruit/Adafruit_SSD1306
|
||||
/** Initialization commands for a 128x32 SSD1306 oled display. */
|
||||
static const uint8_t MEM_TYPE Adafruit128x32init[] = {
|
||||
// Init sequence for Adafruit 128x32 OLED module
|
||||
0x00, // Set to command mode
|
||||
SSD1306_DISPLAYOFF,
|
||||
SSD1306_SETDISPLAYCLOCKDIV, 0x80, // the suggested ratio 0x80
|
||||
SSD1306_SETMULTIPLEX, 0x1F, // ratio 32
|
||||
SSD1306_SETDISPLAYOFFSET, 0x0, // no offset
|
||||
SSD1306_SETSTARTLINE | 0x0, // line #0
|
||||
SSD1306_CHARGEPUMP, 0x14, // internal vcc
|
||||
SSD1306_MEMORYMODE, 0x02, // page mode
|
||||
SSD1306_SEGREMAP | 0x1, // column 127 mapped to SEG0
|
||||
SSD1306_COMSCANDEC, // column scan direction reversed
|
||||
SSD1306_SETCOMPINS, 0x02, // sequential COM pins, disable remap
|
||||
SSD1306_SETCONTRAST, 0x7F, // contrast level 127
|
||||
SSD1306_SETPRECHARGE, 0xF1, // pre-charge period (1, 15)
|
||||
SSD1306_SETVCOMDETECT, 0x40, // vcomh regulator level
|
||||
SSD1306_DISPLAYALLON_RESUME,
|
||||
SSD1306_NORMALDISPLAY,
|
||||
SSD1306_DISPLAYON
|
||||
};
|
||||
/** Initialize a 128x32 SSD1306 oled display. */
|
||||
static const DevType MEM_TYPE Adafruit128x32 = {
|
||||
Adafruit128x32init,
|
||||
sizeof(Adafruit128x32init),
|
||||
128,
|
||||
32,
|
||||
0
|
||||
};
|
||||
//------------------------------------------------------------------------------
|
||||
// This section is based on https://github.com/adafruit/Adafruit_SSD1306
|
||||
/** Initialization commands for a 128x64 SSD1306 oled display. */
|
||||
static const uint8_t MEM_TYPE Adafruit128x64init[] = {
|
||||
// Init sequence for Adafruit 128x64 OLED module
|
||||
0x00, // Set to command mode
|
||||
SSD1306_DISPLAYOFF,
|
||||
SSD1306_SETDISPLAYCLOCKDIV, 0x80, // the suggested ratio 0x80
|
||||
SSD1306_SETMULTIPLEX, 0x3F, // ratio 64
|
||||
SSD1306_SETDISPLAYOFFSET, 0x0, // no offset
|
||||
SSD1306_SETSTARTLINE | 0x0, // line #0
|
||||
SSD1306_CHARGEPUMP, 0x14, // internal vcc
|
||||
SSD1306_MEMORYMODE, 0x02, // page mode
|
||||
SSD1306_SEGREMAP | 0x1, // column 127 mapped to SEG0
|
||||
SSD1306_COMSCANDEC, // column scan direction reversed
|
||||
SSD1306_SETCOMPINS, 0x12, // alt COM pins, disable remap
|
||||
SSD1306_SETCONTRAST, 0x7F, // contrast level 127
|
||||
SSD1306_SETPRECHARGE, 0xF1, // pre-charge period (1, 15)
|
||||
SSD1306_SETVCOMDETECT, 0x40, // vcomh regulator level
|
||||
SSD1306_DISPLAYALLON_RESUME,
|
||||
SSD1306_NORMALDISPLAY,
|
||||
SSD1306_DISPLAYON
|
||||
};
|
||||
/** Initialize a 128x64 oled display. */
|
||||
static const DevType MEM_TYPE Adafruit128x64 = {
|
||||
Adafruit128x64init,
|
||||
sizeof(Adafruit128x64init),
|
||||
128,
|
||||
64,
|
||||
0
|
||||
};
|
||||
//------------------------------------------------------------------------------
|
||||
// This section is based on https://github.com/stanleyhuangyc/MultiLCD
|
||||
/** Initialization commands for a 128x64 SH1106 oled display. */
|
||||
static const uint8_t MEM_TYPE SH1106_128x64init[] = {
|
||||
0x00, // Set to command mode
|
||||
SSD1306_DISPLAYOFF,
|
||||
SSD1306_SETSTARTPAGE | 0X0, // set page address
|
||||
SSD1306_SETCONTRAST, 0x80, // 128
|
||||
SSD1306_SEGREMAP | 0X1, // set segment remap
|
||||
SSD1306_NORMALDISPLAY, // normal / reverse
|
||||
SSD1306_SETMULTIPLEX, 0x3F, // ratio 64
|
||||
SH1106_SET_PUMP_MODE, SH1106_PUMP_ON, // set charge pump enable
|
||||
SH1106_SET_PUMP_VOLTAGE | 0X2, // 8.0 volts
|
||||
SSD1306_COMSCANDEC, // Com scan direction
|
||||
SSD1306_SETDISPLAYOFFSET, 0X00, // set display offset
|
||||
SSD1306_SETDISPLAYCLOCKDIV, 0X80, // set osc division
|
||||
SSD1306_SETPRECHARGE, 0X1F, // set pre-charge period
|
||||
SSD1306_SETCOMPINS, 0X12, // set COM pins
|
||||
SSD1306_SETVCOMDETECT, 0x40, // set vcomh
|
||||
SSD1306_DISPLAYON
|
||||
};
|
||||
/** Initialize a 128x64 oled SH1106 display. */
|
||||
static const DevType MEM_TYPE SH1106_128x64 = {
|
||||
SH1106_128x64init,
|
||||
sizeof(SH1106_128x64init),
|
||||
128,
|
||||
64,
|
||||
2 // SH1106 is a 132x64 controller. Use middle 128 columns.
|
||||
};
|
||||
#endif // SSD1306init_h
|
||||
@ -3,7 +3,13 @@
|
||||
|
||||
#include "StringFormatter.h"
|
||||
|
||||
#define VERSION "3.1.0"
|
||||
#define VERSION "3.1.5"
|
||||
// 3.1.6 Make output ID two bytes (reserved version number for that merge/branch)
|
||||
// 3.1.5 Fix LCD corruption on power-up
|
||||
// 3.1.4 Refactor OLED and LCD drivers and remove unused code
|
||||
// 3.1.3 Add a loop delay to give more time for sensing an Ethernet cable connection
|
||||
// 3.1.2 Eliminate wait after write when prog is joined or prog power is off
|
||||
// 3.1.1 SH1106 OLED Display Offset Fix
|
||||
// 3.0.16 Ignore CV1 bit 7 read rejected by decoder when identifying loco id.
|
||||
// 3.0.15 only send function commands once, not 4 times
|
||||
// 3.0.14 gap in ack tolerant fix, prog track power management over join fix.
|
||||
|
||||
Loading…
Reference in New Issue
Block a user