0.0.7 Ready for testing

installer.ps1

@@ -89,11 +89,11 @@ $displayList = @(
   },
   @{
     option = "OLED 128 x 32"
-    configLine = "#define OLED_DRIVER 128,32,0x3c"
+    configLine = "#define OLED_DRIVER 128,32"
   },
   @{
     option = "OLED 128 x 64"
-    configLine = "#define OLED_DRIVER 128,64,0x3c"
+    configLine = "#define OLED_DRIVER 128,64"
   }
 )
 
@@ -102,8 +102,12 @@ Basics of config.h
 ############################################>
 $configLines = @(
   "/*",
-  "This config.h file was generated by the DCC-EX PowerShell installer $version",
-  "*/`r`n"
+  "This config.h file was generated by the DCC-EX PowerShell installer $installerVersion",
+  "*/",
+  "",
+  "// Define standard motor shield",
+  "#define MOTOR_SHIELD_TYPE STANDARD_MOTOR_SHIELD",
+  ""
 )
 
 <############################################
@@ -148,8 +152,6 @@ Prompt user to confirm all is ready to proceed
 $confirmation = Read-Host "Enter 'Y' or 'y' then press <Enter> to confirm you are ready to proceed, any other key to exit"
 if ($confirmation -ne "Y" -and $confirmation -ne "y") {
   Exit
-} else {
-  Write-Output "Proceeding to obtain the Arduino CLI..."
 }
 
 <############################################
@@ -165,7 +167,7 @@ if (!(Test-Path -PathType Leaf -Path $arduinoCLI)) {
       Exit
     }
   }
-  Write-Output "Downloading and extracting Arduino CLI"
+  Write-Output "`r`nDownloading and extracting Arduino CLI"
   try {
     Invoke-WebRequest -Uri $arduinoCLIURL -OutFile $arduinoCLIZip
   }
@@ -179,6 +181,8 @@ if (!(Test-Path -PathType Leaf -Path $arduinoCLI)) {
   catch {
     Write-Output "Failed to extract Arduino CLI"
   }
+} else {
+  Write-Output "`r`nArduino CLI already downloaded, ensuring it is up to date and you have a board connected"
 }
 
 <############################################
@@ -424,7 +428,7 @@ if ($PSBoundParameters.ContainsKey('configDirectory')) {
 } else {
 
 <############################################
-If no config directory provided, prompt for display option, and WiFi if using Mega
+If no config directory provided, prompt for display option
 ############################################>
   Write-Output "`r`nIf you have an LCD or OLED display connected, you can configure it here`r`n"
   $displaySelect = 1
@@ -441,25 +445,49 @@ If no config directory provided, prompt for display option, and WiFi if using Me
   )
   if ($displayChoice -eq ($displayList.Count + 2)) {
     Exit
-  } elseif ($displayChoice -le 1 -and ($displayList.Count + 1)) {
-    $configLines.Add("// Display configuration")
-    $configLines.Add($displayList[$displayChoice - 1].configLine)
-    $configLines.Add("#define SCROLLMODE 1 // Alternate between pages")
+  } elseif ($displayChoice -le ($displayList.Count)) {
+    $configLines+= "// Display configuration"
+    $configLines+= "$($displayList[$displayChoice - 1].configLine)"
+    $configLines+= "#define SCROLLMODE 1 // Alternate between pages"
   }
+<############################################
+If device supports WiFi, prompt to configure
+############################################>
   if ($wifiBoards.Contains($deviceFQBN)) {
-    # WiFi prompt
+    Write-Output "`r`nYour chosen board supports WiFi`r`n"
+    Write-Output "1 - I don't want WiFi, skip this step
+2 - Configure my device as an access point I will connect to directly
+3 - Configure my device to connect to my home WiFi network
+4 - Exit"
+    do {
+      [int]$wifiChoice = Read-Host "`r`nSelect a WiFi option"
+    } until (
+      ($wifiChoice -ge 1 -and $wifiChoice -le 4)
+    )
+    if ($wifiChoice -eq 4) {
+      Exit
+    } elseif ($wifiChoice -ne 1) {
+      $configLines+= ""
+      $configLines+= "// WiFi configuration"
+      $configLines+= "#define ENABLE_WIFI true"
+      $configLines+= "#define IP_PORT 2560"
+      $configLines+= "#define WIFI_HOSTNAME ""dccex"""
+      $configLines+= "#define WIFI_CHANNEL 1"
+      if ($wifiChoice -eq 3) {
+        $wifiSSID = Read-Host "Please enter the SSID of your home network here"
+        $wifiPassword = Read-Host "Please enter your home network WiFi password here"
+        $configLines+= "#define WIFI_SSID ""$($wifiSSID)"""
+        $configLines+= "#define WIFI_PASSWORD ""$($wifiPassword)"""
+      }
+    }
   }
 
 <############################################
 Write out config.h to a file here only if config directory not provided
 ############################################>
   $configH = $commandStationDirectory + "\config.h"
-  foreach ($line in $configLines) {
-    Write-Output $line
-  }
-  Pause
   try {
-    $configLines | Out-File -FilePath $configH
+    $configLines | Out-File -FilePath $configH -Encoding ascii
   }
   catch {
     Write-Output "Error writing config file to $configH"