dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-23 21:01:25 +01:00
Code Releases Activity

Remove unused initialisation sequences for tiny oled screens

Browse Source
This commit is contained in:
Neil McKechnie 2021-02-21 11:52:59 +00:00
parent fcb9d38965
commit c20e234d43
1 changed files with 0 additions and 60 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

60
SSD1306init.h
View File

@ -114,66 +114,6 @@ struct DevType {
const uint8_t colOffset;
};
//------------------------------------------------------------------------------
/** Initialization commands for a 64x48 Micro OLED display (by r7) */
static const uint8_t MEM_TYPE MicroOLED64x48init[] = {
// Init sequence for 64x48 Micro OLED module
SSD1306_DISPLAYOFF,
SSD1306_SETDISPLAYCLOCKDIV, 0x80, // the suggested ratio 0x80
SSD1306_SETMULTIPLEX, 0x2F, //
SSD1306_SETDISPLAYOFFSET, 0x0, // no offset
SSD1306_SETSTARTLINE | 0x0, // line #0
SSD1306_CHARGEPUMP, 0x14, // internal vcc
SSD1306_NORMALDISPLAY,
SSD1306_DISPLAYALLON_RESUME,
SSD1306_SEGREMAP | 0x1, // column 127 mapped to SEG0
SSD1306_COMSCANDEC, // column scan direction reversed
SSD1306_SETCOMPINS, 0x12, // 0x12 if height > 32 else 0x02
SSD1306_SETCONTRAST, 0x7F, // contrast level 127
SSD1306_SETPRECHARGE, 0xF1, // pre-charge period (1, 15)
SSD1306_SETVCOMDETECT, 0x40, // vcomh regulator level
SSD1306_DISPLAYON
};
/** Initialize a 64x48 Micro OLED display. */
static const DevType MEM_TYPE MicroOLED64x48 = {
MicroOLED64x48init,
sizeof(MicroOLED64x48init),
64,
48,
32
};
//------------------------------------------------------------------------------
// this section is based on
// https://github.com/olikraus/u8g2/blob/master/csrc/u8x8_d_ssd1306_96x16.c
/** Initialization commands for a 96x16 SSD1306 oled display. */
static const uint8_t MEM_TYPE SSD1306_96x16init[] = {
// Init sequence for Generic 96x16 OLED module
SSD1306_DISPLAYOFF,
SSD1306_SETDISPLAYCLOCKDIV, 0x80, // clock divide ratio and osc frequency
SSD1306_SETMULTIPLEX, 0x0F, // multiplex ratio
SSD1306_SETDISPLAYOFFSET, 0x0, // display offset zero
SSD1306_SETSTARTLINE | 0x0, // set display start line to 0
SSD1306_CHARGEPUMP, 0x14, // charge pump setting enable
SSD1306_MEMORYMODE, 0x00, // page addressing mode
SSD1306_SEGREMAP | 0xA1, // segment remap
SSD1306_COMSCANDEC, // scan dir reverse
SSD1306_SETCOMPINS, 0x02, // com pin HW config
SSD1306_SETCONTRAST, 0xAF, // set contrast level 0xaf
SSD1306_SETPRECHARGE, 0xF1, // pre-charge period 0x0f1
SSD1306_SETVCOMDETECT, 0x20, // vcomh deselect level
SSD1306_DEACTIVATE_SCROLL, // Deactivate scroll
SSD1306_DISPLAYALLON_RESUME,
SSD1306_NORMALDISPLAY,
SSD1306_DISPLAYON
};
/** Initialize a 96x16 SSD1306 oled display. */
static const DevType MEM_TYPE SSD1306_96x16 = {
SSD1306_96x16init,
sizeof(SSD1306_96x16init),
96,
16,
0
};
//------------------------------------------------------------------------------
// this section is based on https://github.com/adafruit/Adafruit_SSD1306
/** Initialization commands for a 128x32 SSD1306 oled display. */
static const uint8_t MEM_TYPE Adafruit128x32init[] = {