mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-03 12:55:03 +01:00
Merge branch 'master' into EXRAILPlus
This commit is contained in:
Asbelos
commit
c363ea4714
|
|
@ -1 +1 @@
|
|||
#define GITHUB_SHA "197228c"
|
||||
#define GITHUB_SHA "a2f8a8e"
|
||||
|
|
|
|||
|
|
@ -75,7 +75,7 @@ private:
|
|||
if (immediate) {
|
||||
uint8_t buffer[1];
|
||||
I2CManager.read(_I2CAddress, buffer, 1);
|
||||
_portInputState = ((uint16_t)buffer) & 0xff;
|
||||
_portInputState = buffer[0];
|
||||
} else {
|
||||
requestBlock.wait(); // Wait for preceding operation to complete
|
||||
// Issue new request to read GPIO register
|
||||
|
|
@ -86,7 +86,7 @@ private:
|
|||
// This function is invoked when an I/O operation on the requestBlock completes.
|
||||
void _processCompletion(uint8_t status) override {
|
||||
if (status == I2C_STATUS_OK)
|
||||
_portInputState = ((uint16_t)inputBuffer[0]) & 0xff;
|
||||
_portInputState = inputBuffer[0];
|
||||
else
|
||||
_portInputState = 0xff;
|
||||
}
|
||||
|
|
|
|||
170
SSD1306Ascii.cpp
170
SSD1306Ascii.cpp
|
|
@ -89,28 +89,93 @@ const uint8_t FLASH SSD1306AsciiWire::blankPixels[30] =
|
|||
{0x40, // First byte specifies data mode
|
||||
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
|
||||
|
||||
|
||||
//==============================================================================
|
||||
// this section is based on https://github.com/adafruit/Adafruit_SSD1306
|
||||
|
||||
/** Initialization commands for a 128x32 or 128x64 SSD1306 oled display. */
|
||||
const uint8_t FLASH SSD1306AsciiWire::Adafruit128xXXinit[] = {
|
||||
// Init sequence for Adafruit 128x32/64 OLED module
|
||||
0x00, // Set to command mode
|
||||
SSD1306_DISPLAYOFF,
|
||||
SSD1306_SETDISPLAYCLOCKDIV, 0x80, // the suggested ratio 0x80
|
||||
SSD1306_SETMULTIPLEX, 0x3F, // ratio 64 (initially)
|
||||
SSD1306_SETDISPLAYOFFSET, 0x0, // no offset
|
||||
SSD1306_SETSTARTLINE | 0x0, // line #0
|
||||
SSD1306_CHARGEPUMP, 0x14, // internal vcc
|
||||
SSD1306_MEMORYMODE, 0x02, // page mode
|
||||
SSD1306_SEGREMAP | 0x1, // column 127 mapped to SEG0
|
||||
SSD1306_COMSCANDEC, // column scan direction reversed
|
||||
SSD1306_SETCOMPINS, 0X12, // set COM pins
|
||||
SSD1306_SETCONTRAST, 0x7F, // contrast level 127
|
||||
SSD1306_SETPRECHARGE, 0xF1, // pre-charge period (1, 15)
|
||||
SSD1306_SETVCOMDETECT, 0x40, // vcomh regulator level
|
||||
SSD1306_DISPLAYALLON_RESUME,
|
||||
SSD1306_NORMALDISPLAY,
|
||||
SSD1306_DISPLAYON
|
||||
};
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
// This section is based on https://github.com/stanleyhuangyc/MultiLCD
|
||||
|
||||
/** Initialization commands for a 128x64 SH1106 oled display. */
|
||||
const uint8_t FLASH SSD1306AsciiWire::SH1106_132x64init[] = {
|
||||
0x00, // Set to command mode
|
||||
SSD1306_DISPLAYOFF,
|
||||
SSD1306_SETDISPLAYCLOCKDIV, 0X80, // set osc division
|
||||
SSD1306_SETMULTIPLEX, 0x3F, // ratio 64
|
||||
SSD1306_SETDISPLAYOFFSET, 0X00, // set display offset
|
||||
SSD1306_SETSTARTPAGE | 0X0, // set page address
|
||||
SSD1306_SETSTARTLINE | 0x0, // set start line
|
||||
SH1106_SET_PUMP_MODE, SH1106_PUMP_ON, // set charge pump enable
|
||||
SSD1306_SEGREMAP | 0X1, // set segment remap
|
||||
SSD1306_COMSCANDEC, // Com scan direction
|
||||
SSD1306_SETCOMPINS, 0X12, // set COM pins
|
||||
SSD1306_SETCONTRAST, 0x80, // 128
|
||||
SSD1306_SETPRECHARGE, 0X1F, // set pre-charge period
|
||||
SSD1306_SETVCOMDETECT, 0x40, // set vcomh
|
||||
SH1106_SET_PUMP_VOLTAGE | 0X2, // 8.0 volts
|
||||
SSD1306_NORMALDISPLAY, // normal / reverse
|
||||
SSD1306_DISPLAYON
|
||||
};
|
||||
|
||||
//==============================================================================
|
||||
// SSD1306AsciiWire Method Definitions
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
// Constructor
|
||||
SSD1306AsciiWire::SSD1306AsciiWire(int width, int height) {
|
||||
m_displayWidth = width;
|
||||
m_displayHeight = height;
|
||||
// Set size in characters in base class
|
||||
lcdRows = height / 8;
|
||||
lcdCols = width / 6;
|
||||
m_col = 0;
|
||||
m_row = 0;
|
||||
m_colOffset = 0;
|
||||
|
||||
I2CManager.begin();
|
||||
I2CManager.setClock(400000L); // Set max supported I2C speed
|
||||
for (byte address = 0x3c; address <= 0x3d; address++) {
|
||||
if (I2CManager.exists(address)) {
|
||||
m_i2cAddr = address;
|
||||
if (m_displayWidth==132 && m_displayHeight==64) {
|
||||
// SH1106 display. This uses 128x64 centered within a 132x64 OLED.
|
||||
m_colOffset = 2;
|
||||
I2CManager.write_P(address, SH1106_132x64init, sizeof(SH1106_132x64init));
|
||||
} else if (m_displayWidth==128 && (m_displayHeight==64 || m_displayHeight==32)) {
|
||||
// SSD1306 128x64 or 128x32
|
||||
I2CManager.write_P(address, Adafruit128xXXinit, sizeof(Adafruit128xXXinit));
|
||||
if (m_displayHeight == 32)
|
||||
I2CManager.write(address, 5, 0, // Set command mode
|
||||
SSD1306_SETMULTIPLEX, 0x1F, // ratio 32
|
||||
SSD1306_SETCOMPINS, 0x02); // sequential COM pins, disable remap
|
||||
} else {
|
||||
DIAG(F("OLED configuration option not recognised"));
|
||||
return;
|
||||
}
|
||||
// Device found
|
||||
DIAG(F("%dx%d OLED display configured on I2C:x%x"), width, height, address);
|
||||
if (width == 132)
|
||||
begin(&SH1106_132x64, address);
|
||||
else if (height == 32)
|
||||
begin(&Adafruit128x32, address);
|
||||
else
|
||||
begin(&Adafruit128x64, address);
|
||||
// Set singleton address
|
||||
lcdDisplay = this;
|
||||
clear();
|
||||
|
|
@ -132,23 +197,6 @@ void SSD1306AsciiWire::clearNative() {
|
|||
}
|
||||
}
|
||||
|
||||
// Initialise device
|
||||
void SSD1306AsciiWire::begin(const DevType* dev, uint8_t i2cAddr) {
|
||||
m_i2cAddr = i2cAddr;
|
||||
m_col = 0;
|
||||
m_row = 0;
|
||||
const uint8_t* table = (const uint8_t*)GETFLASHW(&dev->initcmds);
|
||||
uint8_t size = GETFLASH(&dev->initSize);
|
||||
m_displayWidth = GETFLASH(&dev->lcdWidth);
|
||||
m_displayHeight = GETFLASH(&dev->lcdHeight);
|
||||
m_colOffset = GETFLASH(&dev->colOffset);
|
||||
I2CManager.write_P(m_i2cAddr, table, size);
|
||||
if (m_displayHeight == 32)
|
||||
I2CManager.write(m_i2cAddr, 5, 0, // Set command mode
|
||||
SSD1306_SETMULTIPLEX, 0x1F, // ratio 32
|
||||
SSD1306_SETCOMPINS, 0x02); // sequential COM pins, disable remap
|
||||
}
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
// Set cursor position (by text line)
|
||||
|
|
@ -209,82 +257,6 @@ size_t SSD1306AsciiWire::writeNative(uint8_t ch) {
|
|||
return 1;
|
||||
}
|
||||
|
||||
//==============================================================================
|
||||
// this section is based on https://github.com/adafruit/Adafruit_SSD1306
|
||||
|
||||
/** Initialization commands for a 128x32 or 128x64 SSD1306 oled display. */
|
||||
const uint8_t FLASH SSD1306AsciiWire::Adafruit128xXXinit[] = {
|
||||
// Init sequence for Adafruit 128x32/64 OLED module
|
||||
0x00, // Set to command mode
|
||||
SSD1306_DISPLAYOFF,
|
||||
SSD1306_SETDISPLAYCLOCKDIV, 0x80, // the suggested ratio 0x80
|
||||
SSD1306_SETMULTIPLEX, 0x3F, // ratio 64 (initially)
|
||||
SSD1306_SETDISPLAYOFFSET, 0x0, // no offset
|
||||
SSD1306_SETSTARTLINE | 0x0, // line #0
|
||||
SSD1306_CHARGEPUMP, 0x14, // internal vcc
|
||||
SSD1306_MEMORYMODE, 0x02, // page mode
|
||||
SSD1306_SEGREMAP | 0x1, // column 127 mapped to SEG0
|
||||
SSD1306_COMSCANDEC, // column scan direction reversed
|
||||
SSD1306_SETCOMPINS, 0X12, // set COM pins
|
||||
SSD1306_SETCONTRAST, 0x7F, // contrast level 127
|
||||
SSD1306_SETPRECHARGE, 0xF1, // pre-charge period (1, 15)
|
||||
SSD1306_SETVCOMDETECT, 0x40, // vcomh regulator level
|
||||
SSD1306_DISPLAYALLON_RESUME,
|
||||
SSD1306_NORMALDISPLAY,
|
||||
SSD1306_DISPLAYON
|
||||
};
|
||||
|
||||
/** Initialize a 128x32 SSD1306 oled display. */
|
||||
const DevType FLASH SSD1306AsciiWire::Adafruit128x32 = {
|
||||
Adafruit128xXXinit,
|
||||
sizeof(Adafruit128xXXinit),
|
||||
128,
|
||||
32,
|
||||
0
|
||||
};
|
||||
|
||||
/** Initialize a 128x64 oled display. */
|
||||
const DevType FLASH SSD1306AsciiWire::Adafruit128x64 = {
|
||||
Adafruit128xXXinit,
|
||||
sizeof(Adafruit128xXXinit),
|
||||
128,
|
||||
64,
|
||||
0
|
||||
};
|
||||
//------------------------------------------------------------------------------
|
||||
// This section is based on https://github.com/stanleyhuangyc/MultiLCD
|
||||
|
||||
/** Initialization commands for a 128x64 SH1106 oled display. */
|
||||
const uint8_t FLASH SSD1306AsciiWire::SH1106_132x64init[] = {
|
||||
0x00, // Set to command mode
|
||||
SSD1306_DISPLAYOFF,
|
||||
SSD1306_SETDISPLAYCLOCKDIV, 0X80, // set osc division
|
||||
SSD1306_SETMULTIPLEX, 0x3F, // ratio 64
|
||||
SSD1306_SETDISPLAYOFFSET, 0X00, // set display offset
|
||||
SSD1306_SETSTARTPAGE | 0X0, // set page address
|
||||
SSD1306_SETSTARTLINE | 0x0, // set start line
|
||||
SH1106_SET_PUMP_MODE, SH1106_PUMP_ON, // set charge pump enable
|
||||
SSD1306_SEGREMAP | 0X1, // set segment remap
|
||||
SSD1306_COMSCANDEC, // Com scan direction
|
||||
SSD1306_SETCOMPINS, 0X12, // set COM pins
|
||||
SSD1306_SETCONTRAST, 0x80, // 128
|
||||
SSD1306_SETPRECHARGE, 0X1F, // set pre-charge period
|
||||
SSD1306_SETVCOMDETECT, 0x40, // set vcomh
|
||||
SH1106_SET_PUMP_VOLTAGE | 0X2, // 8.0 volts
|
||||
SSD1306_NORMALDISPLAY, // normal / reverse
|
||||
SSD1306_DISPLAYON
|
||||
};
|
||||
|
||||
/** Initialize a 132x64 oled SH1106 display. */
|
||||
const DevType FLASH SSD1306AsciiWire::SH1106_132x64 = {
|
||||
SH1106_132x64init,
|
||||
sizeof(SH1106_132x64init),
|
||||
128,
|
||||
64,
|
||||
2 // SH1106 is a 132x64 controller but most OLEDs are only attached
|
||||
// to columns 2-129.
|
||||
};
|
||||
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
|
|
|
|||
|
|
@ -32,21 +32,6 @@
|
|||
//#define NOLOWERCASE
|
||||
|
||||
//------------------------------------------------------------------------------
|
||||
// Device initialization structure.
|
||||
|
||||
struct DevType {
|
||||
/* Pointer to initialization command bytes. */
|
||||
const uint8_t* initcmds;
|
||||
/* Number of initialization bytes */
|
||||
const uint8_t initSize;
|
||||
/* Width of the display in pixels */
|
||||
const uint8_t lcdWidth;
|
||||
/** Height of the display in pixels. */
|
||||
const uint8_t lcdHeight;
|
||||
/* Column offset RAM to display. Used to pick start column of SH1106. */
|
||||
const uint8_t colOffset;
|
||||
};
|
||||
|
||||
// Constructor
|
||||
class SSD1306AsciiWire : public LCDDisplay {
|
||||
public:
|
||||
|
|
@ -55,25 +40,17 @@ class SSD1306AsciiWire : public LCDDisplay {
|
|||
SSD1306AsciiWire(int width, int height);
|
||||
|
||||
// Initialize the display controller.
|
||||
void begin(const DevType* dev, uint8_t i2cAddr);
|
||||
void begin(uint8_t i2cAddr);
|
||||
|
||||
// Clear the display and set the cursor to (0, 0).
|
||||
void clearNative() override;
|
||||
|
||||
// Set cursor to start of specified text line
|
||||
void setRowNative(byte line) override;
|
||||
|
||||
// Initialize the display controller.
|
||||
void init(const DevType* dev);
|
||||
|
||||
// Write one character to OLED
|
||||
size_t writeNative(uint8_t c) override;
|
||||
|
||||
// Display characteristics / initialisation
|
||||
static const DevType FLASH Adafruit128x32;
|
||||
static const DevType FLASH Adafruit128x64;
|
||||
static const DevType FLASH SH1106_132x64;
|
||||
|
||||
bool isBusy() override { return requestBlock.isBusy(); }
|
||||
|
||||
private:
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
|
||||
#include "StringFormatter.h"
|
||||
|
||||
#define VERSION "3.2.0 rc4"
|
||||
#define VERSION "3.2.0 rc5"
|
||||
// 3.2.0 Major functional and non-functional changes.
|
||||
// New HAL added for I/O (digital and analogue inputs and outputs, servos etc).
|
||||
// Support for MCP23008, MCP23017 and PCF9584 I2C GPIO Extender modules.
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user