mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-23 21:01:25 +01:00
Update README.md
Add 3.1 features
This commit is contained in:
parent
79a76e95b6
commit
c7af43c70b
27
README.md
27
README.md
@ -12,11 +12,13 @@ Both CommandStation-EX and BaseStation-Classic support much of the NMRA Digital
|
||||
|
||||
* simultaneous control of multiple locomotives
|
||||
* 2-byte and 4-byte locomotive addressing
|
||||
* 128-step speed throttling
|
||||
* 28 or 128-step speed throttling
|
||||
* Activate/de-activate all accessory function addresses 0-2048
|
||||
* Control of all cab functions F0-F28
|
||||
* Control of all cab functions F0-F28 and F29-F68
|
||||
* Main Track: Write configuration variable bytes and set/clear specific configuration variable (CV) bits (aka Programming on Main or POM)
|
||||
* Programming Track: Same as the main track with the addition of reading configuration variable bytes
|
||||
* And manu more custom features. see [What's new in CommandStation-EX?]#whats-new-in-commandstation-ex
|
||||
|
||||
|
||||
# What’s in this Repository?
|
||||
|
||||
@ -38,11 +40,11 @@ in config.h.
|
||||
|
||||
## What's new in CommandStation-EX?
|
||||
|
||||
* WiThrottle server built in. Connect Engine Driver or WiThrottle clients directly to your Command Station
|
||||
* WiThrottle server built in. Connect Engine Driver or WiThrottle clients directly to your Command Station (or through JMRI as before)
|
||||
* WiFi and Ethernet shield support
|
||||
* No more jumpers or soldering!
|
||||
* Direct support for all the most popular motor control boards
|
||||
* I2C Display support
|
||||
* Direct support for all the most popular motor control boards including single pin (Arduino) or dual pin (IBT_2) type PWM inputs without the need for an adapter circuit
|
||||
* I2C Display support (LCD and OLED)
|
||||
* Improved short circuit detection and automatic reset from an overload
|
||||
* Current reading, sensing and ACK detection settings in milliAmps instead of just pin readings
|
||||
* Improved adherence to the NMRA DCC specification
|
||||
@ -50,6 +52,21 @@ in config.h.
|
||||
* Railcom cutout (beta)
|
||||
* Simpler, modular, faster code with an API Library for developers for easy expansion
|
||||
* New features and functions in JMRI
|
||||
* Ability to join MAIN and PROG tracks into one MAIN track to run your locos
|
||||
* "Drive-Away" feature - Throttles with support, like Engine Driver, can allow a loco to be programmed on a usable, electrically isolated programming track and then drive off onto the main track
|
||||
* Diagnostic commands to test decoders that aren't reading or writing correctly
|
||||
* Support for Uno, Nano, Mega, Nano Every and Teensy microcontrollers
|
||||
* User Functions: Filter regular commands (like a turnout or output command) and pass it to your own function or accessory
|
||||
* Support for LCN (layout control nodes)
|
||||
* mySetup.h file that acts like an Autoexec.Bat command to send startup commands to the CS
|
||||
* High Accuracty Waveform option for rock steady DCC signals
|
||||
* New current response outputs current in mA, overlimit current, and maximum board capable current. Support for new current meter in JMRI
|
||||
* USB Browser based EX-WebThrottle
|
||||
* New, simpler, function control command
|
||||
* Number of locos discovery command `<#>`
|
||||
* Emergency stop command <!>
|
||||
* Release cabs from memory command <-> all cabs, <- CAB> for just one loco address
|
||||
* Automatic slot (register) management
|
||||
* Automation (coming soon)
|
||||
|
||||
NOTE: DCC-EX is a major rewrite to the code. We started over and rebuilt it from the ground up! For what that means to you, click [HERE](notes/rewrite.md).
|
||||
|
Loading…
Reference in New Issue
Block a user