mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-23 21:01:25 +01:00
Update release_notes.md
This commit is contained in:
Fred
GitHub
parent
05da109144
commit
ea85a33e03
222
release_notes.md
222
release_notes.md
@ -1,112 +1,164 @@
|
||||
The DCC-EX Team is pleased to release CommandStation-EX-v3.0.0 as a Production Release. This release is a major re-write of earlier versions. We've re-architected the code-base so that it can better handle new features going forward.
|
||||
DCC-EX Team is pleased to release CommandStation-EX-v3.1.0 as a Production Release. Release v3.1.0 is a minor release that adds additional features and fixes a number of bugs. With the number of new features, this could have easily been a major release. The team is continually improving the architecture of DCC++EX to make it more flexible and optimizing the code so as to get more perfromance from the Arduino microprocessors. This release includes all of the Point Releases from v3.0.1 to v3.0.12.
|
||||
|
||||
**Known Bugs:**
|
||||
- **Consisting through JMRI** - currently does not work in this release. You may use the <M> command to do this manually.
|
||||
- **Wi-Fi** - works, but can be challenging to use if you want to switch between AP mode and STA station mode.
|
||||
- **Pololu Motor Shield** - is supported with this release, but the user may have to play around with some timings to enable programming mode due to limitation in its current sensing circuitry
|
||||
**Known Issues**
|
||||
|
||||
- **Wi-Fi** - works, but requires sending <AT> commands from a serial monitor if you want to switch between AP mode and STA station mode.
|
||||
- **Pololu Motor Shield** - is supported with this release, but the user may have to adjust timings to enable programming mode due to limitation in its current sensing circuitry
|
||||
|
||||
#### Summary of key features and/or bug fixes by Point Release
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.16**
|
||||
|
||||
- Ignore CV1 bit 7 read if rejected by a non NMRA compliant decoder when identifying loco id
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.15**
|
||||
|
||||
- Send function commands just once instead of repeating them 4 times
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.14**
|
||||
|
||||
- Add feature to tolerate decoders that incorrectly have gaps in their ACK pulse
|
||||
- Provide proper track power management when joining and unjoining tracks with <1 JOIN>
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.13**
|
||||
|
||||
- Fix for CAB Functions greater than 127
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.12**
|
||||
|
||||
- Fixed clear screen issue for nanoEvery and nanoWifi
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.11**
|
||||
|
||||
- Reorganized files for support of 128 speed steps
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.10**
|
||||
|
||||
- Added Support for the Teensy 3.2, 3.5, 3.6, 4.0 and 4.1 MCUs
|
||||
- No functional change just changes to avoid complier warnings for Teensy/nanoEvery
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.9**
|
||||
|
||||
- Rearranges serial newlines for the benefit of JMRI
|
||||
- Major update for efficiencies in displays (LCD, OLED)
|
||||
- Add I2C Support functions
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.8**
|
||||
|
||||
- Wraps <* *> around DIAGS for the benefit of JMRI
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.7**
|
||||
- **Support for 28 Speed steps** - Option to turn on 28 step speed decoders in addition to 128. If set, all locos will use 28 steps.
|
||||
- **Improved overload messages with raw values (relative to offset)**
|
||||
|
||||
- Implemented support for older 28 apeed step decoders - Option to turn on 28 step speed decoders in addition to 128. If set, all locos will use 28 steps.
|
||||
- Improved overload messages with raw values (relative to offset)
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.6**
|
||||
|
||||
- **Prevent compiler warning about deprecated B constants**
|
||||
- **Fix Bug that did not let us transmit 5 byte sized packets** - 5 Byte commands like PoM (programming on main) were not being sent correctly
|
||||
- **Huge function numbers (DCC BinaryStateControl)** - Support Functions beyond F28
|
||||
- **<!> ESTOP all** - New command to emergency stop all locos on the main track
|
||||
- **<- [cab]> estop and forget cab/all cabs** - Stop and remove loco from the CS. Stops the repeating throttle messages
|
||||
- **``<D RESET>`` command to reboot arduino**
|
||||
- **Automatic sensor offset detect** -
|
||||
- **Improved startup msgs from Motor Drivers (accuracy and auto sense factors)** -
|
||||
- **Drop post-write verify** - No need to double check CV writes. Writes are now even faster.
|
||||
- **Allow current sene pin set to UNUSED_PIN** - No need to ground an unused analog current pin. Produce startup warning and callback -2 for prog track cmds.
|
||||
- Prevent compiler warning about deprecated B constants
|
||||
- Fix Bug that did not let us transmit 5 byte sized packets - 5 Byte commands like PoM (programming on main) were not being sent correctly
|
||||
- Support for Huge function numbers (DCC BinaryStateControl) - Support Functions beyond F28
|
||||
- <!> ESTOP all - New command to emergency stop all locos on the main track
|
||||
- <- [cab]> estop and forget cab/all cabs - Stop and remove loco from the CS. Stops the repeating throttle messages
|
||||
- `<D RESET>` command to reboot Arduino
|
||||
- Automatic sensor offset detect
|
||||
- Improved startup msgs from Motor Drivers (accuracy and auto sense factors)
|
||||
- Drop post-write verify - No need to double check CV writes. Writes are now even faster.
|
||||
- Allow current sense pin set to UNUSED_PIN - No need to ground an unused analog current pin. Produce startup warning and callback -2 for prog track cmds.
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.5**
|
||||
- **Fix Fn Key startup with loco ID and fix state change for F16-28**
|
||||
- removed ethernet mac config and made it automatic
|
||||
- show wifi ip and port on lcd
|
||||
- auto load config.example.h with warningh
|
||||
- dropped example .ino files
|
||||
- corrected .ino comments
|
||||
- pololu fault pin handling
|
||||
- waveform speed/simplicity improvements
|
||||
- improved pin speed in waveform
|
||||
- portability to nanoEvery and UnoWifiRev2 CPUs
|
||||
- analog read speed improvements
|
||||
- drop need for DIO2 library
|
||||
- improved current check code
|
||||
- linear <a> command
|
||||
- removed need for ArduinoTimers files
|
||||
- removed <D DCC SLOW>
|
||||
- Removed option to choose different timer
|
||||
- Added EX-RAIL hooks for later
|
||||
- fixed Turnout list
|
||||
- allow command keywords in mixed case
|
||||
- dropped unused memstream
|
||||
- PWM pin accuracy if requirements met.
|
||||
|
||||
- Fix Fn Key startup with loco ID and fix state change for F16-28
|
||||
- Removed ethernet mac config and made it automatic
|
||||
- Show wifi ip and port on lcd
|
||||
- Auto load config.example.h with warning
|
||||
- Dropped example .ino files
|
||||
- Corrected .ino comments
|
||||
- Add Pololu fault pin handling
|
||||
- Waveform speed/simplicity improvements
|
||||
- Improved pin speed in waveform
|
||||
- Portability to nanoEvery and UnoWifiRev2 CPUs
|
||||
- Analog read speed improvements
|
||||
- Drop need for DIO2 library
|
||||
- Improved current check code
|
||||
- Linear command
|
||||
- Removed need for ArduinoTimers files
|
||||
- Removed option to choose different timer
|
||||
- Added EX-RAIL hooks for automation in future version
|
||||
- Fixed Turnout list
|
||||
- Allow command keywords in mixed case
|
||||
- Dropped unused memstream
|
||||
- PWM pin accuracy if requirements met
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.4**
|
||||
- **"Drive-Away" Feature added so that throttles like Engine Driver can allow a loco to be programmed on a usable, electrically isolated programming track and then drive off onto the main track.
|
||||
- **WiFi Startup Fixes**
|
||||
|
||||
|
||||
- "Drive-Away" Feature - added so that throttles like Engine Driver can allow a loco to be programmed on a usable, electrically isolated programming track and then drive off onto the main track
|
||||
- WiFi Startup Fixes
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.3**
|
||||
- **<W addr> command to write loco address and clear consist**
|
||||
- **<R> command will allow for consist address**
|
||||
- **Startup commands implemented**
|
||||
|
||||
|
||||
- Command to write loco address and clear consist
|
||||
- Command will allow for consist address
|
||||
- Startup commands implemented
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.2:**
|
||||
- **Create new output for current in mA for ``<c>`` command** - New current response outputs current in mA, overlimit current, and maximum board capable current
|
||||
- **Simultaneously update JMRI to handle new current meter**
|
||||
|
||||
- Create new output for current in mA for `<c>` command - New current response outputs current in mA, overlimit current, and maximum board capable current
|
||||
- Simultaneously update JMRI to handle new current meter
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.1:**
|
||||
- **Add back fix for jitter**
|
||||
- **Add Turnouts, Outputs and Sensors to ```<s>``` command output**
|
||||
|
||||
**Summary of the key new features added to CommandStation-EX V3.0.0:**
|
||||
- Add back fix for jitter
|
||||
- Add Turnouts, Outputs and Sensors to `<s>` command output
|
||||
|
||||
- **New USB Browser Based Throttle** - WebThrottle-EX is a full front-end to controller to control the CS to run trains.
|
||||
- **WiFi Support** - AP and station modes supported. Auto-detection of an ESP8266 WiFi module with AT firmware on a Mega's serial port. Connection to JMRI and WiThrottle clients.
|
||||
- **Withrottle Integrations** - Act as a host for up to four WiThrottle clients concurrently.
|
||||
- **Add LCD/OLED support** - OLED supported on Mega only
|
||||
- **Improved CV programming routines** - checks for length of CV pulse, and breaks out of the wait state once it has received an ACK, now reading one CV per second.
|
||||
- **Improved current sensing** - rewrote current sensing routines for safer operation. Current thresholds based on milliamps, not magic numbers
|
||||
- **Individual track power control** - Ability to toggle power on either or both tracks, and to "JOIN" the tracks and make them output the same waveform for multiple power districts.
|
||||
- **Single or Dual-Pin PWM output** - Allows control of H-bridges with PH/EN or dual PWM inputs
|
||||
- **New, simpler function command** - ```<F>``` command allows setting functions based on their number, not based on a code as in ```<f>```
|
||||
- **Function reminders** - Function reminders are sent in addition to speed reminders
|
||||
- **Functions to F28** - All NMRA functions are now supported
|
||||
- **Filters and user functions** - Ability to filter commands in the parser and execute custom code based on them. (ex: Redirect Turnout commands via NRF24)
|
||||
- **Diagnostic ```<D>``` commands** - See documentation for a full list of new diagnostic commands
|
||||
- **Rewrote DCC++ Parser** - more efficient operation, accepts multi-char input and uses less RAM
|
||||
- **Rewritten waveform generator** - capable of using any pin for DCC waveform out, eliminating the need for jumpers
|
||||
- **Rewritten packet generator** - Simplify and make smaller, remove idea of "registers" from original code
|
||||
- **Add free RAM messages** - Free RAM messages are now printed whenever there is a decerase in available RAM
|
||||
- **Fix EEPROM bugs**
|
||||
- **Number of locos discovery command** - ```<#>``` command
|
||||
- **Support for more locomotives** - 20 locomotives on an UNO and 50 an a Mega.
|
||||
- **Automatic slot managment** - slot variable in throttle/function commands are ignored and slot management is taken care of automatically. ```<!>``` command added to release locos from memory.
|
||||
**CommandStation-EX V3.0.0:**
|
||||
|
||||
**Release v3.0.0 was a major rewrite if earlier versions of DCC++. The code base was re-architeced and core changes were made to the Waveform generator to reduce overhead and make better use of Arduino.** **Summary of the key new features added in Release v3.0.0 include:**
|
||||
|
||||
- **New USB Browser Based Throttle** - WebThrottle-EX is a full front-end to controller to control the CS to run trains.
|
||||
- **WiFi Support** - AP and station modes supported. Auto-detection of an ESP8266 WiFi module with AT firmware on a Mega's serial port. Connection to JMRI and WiThrottle clients.
|
||||
- **Withrottle Integrations** - Act as a host for up to four WiThrottle clients concurrently.
|
||||
- **Add LCD/OLED support** - OLED supported on Mega only
|
||||
- **Improved CV programming routines** - checks for length of CV pulse, and breaks out of the wait state once it has received an ACK, now reading one CV per second.
|
||||
- **Improved current sensing** - rewrote current sensing routines for safer operation. Current thresholds based on milliamps, not magic numbers
|
||||
- **Individual track power control** - Ability to toggle power on either or both tracks, and to "JOIN" the tracks and make them output the same waveform for multiple power districts.
|
||||
- **Single or Dual-Pin PWM output** - Allows control of H-bridges with PH/EN or dual PWM inputs
|
||||
- **New, simpler function command** - `<F>` command allows setting functions based on their number, not based on a code as in `<f>`
|
||||
- **Function reminders** - Function reminders are sent in addition to speed reminders
|
||||
- **Functions to F28** - All NMRA functions are now supported
|
||||
- **Filters and user functions** - Ability to filter commands in the parser and execute custom code based on them. (ex: Redirect Turnout commands via NRF24)
|
||||
- **Diagnostic `<D>` commands** - See documentation for a full list of new diagnostic commands
|
||||
- **Rewrote DCC++ Parser** - more efficient operation, accepts multi-char input and uses less RAM
|
||||
- **Rewritten waveform generator** - capable of using any pin for DCC waveform out, eliminating the need for jumpers
|
||||
- **Rewritten packet generator** - Simplify and make smaller, remove idea of "registers" from original code
|
||||
- **Add free RAM messages** - Free RAM messages are now printed whenever there is a decerase in available RAM
|
||||
- **Fix EEPROM bugs**
|
||||
- **Number of locos discovery command** - `<#>` command
|
||||
- **Support for more locomotives** - 20 locomotives on an UNO and 50 an a Mega.
|
||||
- **Automatic slot managment** - slot variable in throttle/function commands are ignored and slot management is taken care of automatically. `<!>` command added to release locos from memory.
|
||||
|
||||
**Key Contributors**
|
||||
|
||||
**Project Lead**
|
||||
|
||||
- Fred Decker - Holly Springs, North Carolina, USA (FlightRisk)
|
||||
|
||||
**CommandStation-EX Developers**
|
||||
|
||||
- Chris Harlow - Bournemouth, UK (UKBloke)
|
||||
- Harald Barth - Stockholm, Sweden (Haba)
|
||||
- Neil McKechnie - Worcestershire, UK (NeilMck)
|
||||
- Fred Decker - Holly Springs, North Carolina, USA (FlightRisk)
|
||||
- Dave Cutting - Logan, Utah, USA (Dave Cutting/ David Cutting)
|
||||
- M Steve Todd - - Engine Driver and JMRI Interface
|
||||
- Scott Catalanno - Pennsylvania
|
||||
- Scott Catalano - Pennsylvania
|
||||
- Gregor Baues - Île-de-France, France (grbba)
|
||||
|
||||
**exInstaller Software**
|
||||
|
||||
- Anthony W - Dayton, Ohio, USA (Dex, Dex++)
|
||||
|
||||
**Website and Documentation**
|
||||
|
||||
- Mani Kumar - Bangalor, India (Mani / Mani Kumar)
|
||||
- Fred Decker - Holly Springs, North Carolina, USA (FlightRisk)
|
||||
- Dave Cutting - Logan, Utah, USA (Dave Cutting/ David Cutting)
|
||||
@ -115,25 +167,25 @@ The DCC-EX Team is pleased to release CommandStation-EX-v3.0.0 as a Production R
|
||||
- Kevin Smith - (KCSmith)
|
||||
|
||||
**WebThrotle-EX**
|
||||
|
||||
- Fred Decker - Holly Springs, NC (FlightRisk/FrightRisk)
|
||||
- Mani Kumar - Bangalor, India (Mani /Mani Kumar)
|
||||
- Matt H - Somewhere in Europe
|
||||
|
||||
|
||||
|
||||
**Beta Testing / Release Management / Support**
|
||||
- Larry Dribin - Release Management
|
||||
- Keith Ledbetter
|
||||
- BradVan der Elst
|
||||
- Andrew Pye
|
||||
- Mike Bowers
|
||||
|
||||
- Larry Dribin - Release Management
|
||||
- Keith Ledbetter
|
||||
- BradVan der Elst
|
||||
- Andrew Pye
|
||||
- Mike Bowers
|
||||
- Randy McKenzie
|
||||
- Roberto Bravin
|
||||
- Sim Brigden
|
||||
- Alan Lautenslager
|
||||
- Martin Bafver
|
||||
- Mário André Silva
|
||||
- Anthony Kochevar
|
||||
- Gajanatha Kobbekaduwe
|
||||
- Sumner Patterson
|
||||
- Martin Bafver
|
||||
- Mário André Silva
|
||||
- Anthony Kochevar
|
||||
- Gajanatha Kobbekaduwe
|
||||
- Sumner Patterson
|
||||
- Paul - Virginia, USA
|
||||
|
||||
Loading…
Reference in New Issue
Block a user