1
0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-23 04:41:24 +01:00

EX8874 entry for SAMD/STM32

This commit is contained in:
pmantoine 2023-05-08 08:32:47 +08:00
parent 991bda63e0
commit f4e3ca7c81

View File

@ -1,7 +1,7 @@
/*
* © 2022 Paul M. Antoine
* © 2022-2023 Paul M. Antoine
* © 2021 Fred Decker
* © 2020-2022 Harald Barth
* © 2020-2023 Harald Barth
* (c) 2020 Chris Harlow. All rights reserved.
* (c) 2021 Fred Decker. All rights reserved.
* (c) 2020 Harald Barth. All rights reserved.
@ -60,7 +60,8 @@
// Arduino STANDARD Motor Shield, used on different architectures:
#if defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_ARCH_STM32)
// Setup for SAMD21 Sparkfun DEV board using Arduino standard Motor Shield R3 (MUST be R3
// Standard Motor Shield definition for 3v3 processors (other than the ESP32)
// Setup for SAMD21 Sparkfun DEV board MUST use Arduino Motor Shield R3 (MUST be R3
// for 3v3 compatibility!!) senseFactor for 3.3v systems is 1.95 as calculated when using
// 10-bit A/D samples, and for 12-bit samples it's more like 0.488, but we probably need
// to tweak both these
@ -70,6 +71,12 @@
#define SAMD_STANDARD_MOTOR_SHIELD STANDARD_MOTOR_SHIELD
#define STM32_STANDARD_MOTOR_SHIELD STANDARD_MOTOR_SHIELD
// EX 8874 based shield connected to a 3V3 system with 12-bit (4096) ADC
#define EX8874_SHIELD F("EX8874"), \
new MotorDriver( 3, 12, UNUSED_PIN, 9, A0, 1.27, 5000, -A4), \
new MotorDriver(11, 13, UNUSED_PIN, 8, A1, 1.27, 5000, -A5)
#elif defined(ARDUINO_ARCH_ESP32)
// STANDARD shield on an ESPDUINO-32 (ESP32 in Uno form factor). The shield must be eiter the
// 3.3V compatible R3 version or it has to be modified to not supply more than 3.3V to the
@ -94,6 +101,12 @@
#define BRAKE_PWM_SWAPPED_MOTOR_SHIELD F("BPS_MOTOR_SHIELD"), \
new MotorDriver(-9 , 12, UNUSED_PIN, -3, A0, 2.99, 1500, UNUSED_PIN), \
new MotorDriver(-8 , 13, UNUSED_PIN,-11, A1, 2.99, 1500, UNUSED_PIN)
// EX 8874 based shield connected to a 5V system (like Arduino) and 10bit (1024) ADC
#define EX8874_SHIELD F("EX8874"), \
new MotorDriver( 3, 12, UNUSED_PIN, 9, A0, 5.08, 5000, -A4), \
new MotorDriver(11, 13, UNUSED_PIN, 8, A1, 5.08, 5000, -A5)
#endif
// Pololu Motor Shield
@ -122,11 +135,6 @@
new MotorDriver(2, 7, UNUSED_PIN, -9, A0, 10, 2500, 6), \
new MotorDriver(4, 8, UNUSED_PIN, -10, A1, 10, 2500, 12)
// EX 8874 based shield connected to a 5V system (like Arduino) and 10bit (1024) ADC
#define EX8874_SHIELD F("EX8874"), \
new MotorDriver( 3, 12, UNUSED_PIN, 9, A0, 5.08, 5000, -A4), \
new MotorDriver(11, 13, UNUSED_PIN, 8, A1, 5.08, 5000, -A5)
// Firebox Mk1
#define FIREBOX_MK1 F("FIREBOX_MK1"), \
new MotorDriver(3, 6, 7, UNUSED_PIN, A5, 9.766, 5500, UNUSED_PIN), \