Neil McKechnie
81559998ec
Update IODevice base class to better support filter drivers
...
Filter drivers provide extra functionality above a hardware driver. For example, a hardware driver for a PWM module may just set the PWM ratio, but a separate filter driver could animate motors or servos over time, calling the PWM driver to output the pulses. This would allow the animations to be easily implemented on a different type of PWM module.
2023-02-03 12:55:25 +00:00
Neil McKechnie
847ced2f49
Update IO_VL53L0X.h
...
Improve comments; drive XSHUT pin through pullup resistor, not directly.
2023-02-03 12:46:38 +00:00
Neil McKechnie
49713badb2
Update I2CManager_NonBlocking.h
...
Add code to try and recover from stuck bus following a timeout.
2023-02-02 12:21:35 +00:00
pmantoine
be88344407
PCF8575 16-bit port device support added
2023-02-02 07:12:47 +08:00
Neil McKechnie
ba9b363058
I2CManager_NonBlocking - Defer I2C speed changes for all drivers
...
Following on from the change to I2CManager_SAMD.h, the capability of deferring a request to change the speed of the I2C has been removed from the SAMD driver and put into the common NonBlocking code, so that all native drivers benefit from it.
2023-01-31 18:39:15 +00:00
Neil McKechnie
bdffd36820
IODevice.h - change visibility of findDevice to protected.
...
To support nested drivers efficiently (i.e. to allow the higher driver to call another driver directly, without searching for a VPIN every time), the visibility of the IODevice::findDevice() function has been changed from private to protected.
2023-01-31 15:24:38 +00:00
Neil McKechnie
4d350040ba
I2CManager_SAMD.h - avoid bus hangs on speed changes
...
The speed change is deferred until the next transmission is about to start to avoid issues with the I2C module being disabled and enabled during a transmission.
2023-01-31 12:28:51 +00:00
Neil McKechnie
291a331f3e
Fix read operations on I2CManager for SAMD
2023-01-31 00:36:57 +00:00
Harald Barth
95945eab4c
version bump
2023-01-29 08:50:19 +01:00
Harald Barth
638682f05c
STM32F4xx fast ADC read implementation (merge branch 'stm32_adcee_pma' into devel)
2023-01-29 08:47:05 +01:00
Harald Barth
212bf8d80e
Broadcast power for <s> again
2023-01-29 08:13:52 +01:00
Harald Barth
290d878063
version
2023-01-28 19:09:16 +01:00
Harald Barth
2a7588b1b5
jT answer should contain empty string
2023-01-28 19:07:59 +01:00
pmantoine
be33bafa66
Fixed logic of ADC ready
2023-01-28 14:39:00 +08:00
pmantoine
6cc66e26c1
Initial STM32F4xx fast ADC read implementation
2023-01-28 13:58:55 +08:00
Harald Barth
c91d66549c
Remove warnings
2023-01-27 19:42:55 +01:00
Harald Barth
9e5d780c14
Bugfix for issue #299 TurnoutDescription NULL
2023-01-27 18:42:26 +01:00
Harald Barth
2c0886bc2f
version and copyright info
2023-01-27 17:03:39 +01:00
Harald Barth
762742b4af
Add the macro def
2023-01-27 13:05:36 +01:00
Harald Barth
88b572a148
Add EXRAIL IFLOCO function
2023-01-26 16:55:58 +01:00
peteGSX
fcf16c1367
Update version
2023-01-26 18:53:25 +10:00
Colin Murdoch
c69b8d85c8
Merge branch 'devel-plus-fastclock' into devel
2023-01-24 12:30:48 +00:00
Colin Murdoch
006c85e6ae
Delete platformio.ini.original
...
Delete file not required
2023-01-24 12:21:28 +00:00
Neil McKechnie
d0ce59b19f
I2CManager_Mega4809.h - allow other I2C clock speeds.
2023-01-24 09:35:10 +00:00
Neil McKechnie
a3d4255fee
Revert "I2CManager_Mega4809.h - allow other I2C clock speeds."
...
This reverts commit 682c47f7dd
2023-01-24 09:33:17 +00:00
Neil McKechnie
e8e00f69d6
Non-blocking I2C - reset byte counters on timeout.
2023-01-23 22:31:33 +00:00
Neil McKechnie
10c8915d33
Ensure correct functions are called for strcpy_P, strncmp_P, strlen_P etc. on non-AVR targets..
2023-01-23 22:28:43 +00:00
peteGSX
4f233de726
Merge pull request #297 from DCC-EX:31-exio-to-do-optimise-read-speed
...
31-exio-to-do-optimise-read-speed
2023-01-24 08:25:13 +10:00
Neil McKechnie
682c47f7dd
I2CManager_Mega4809.h - allow other I2C clock speeds.
2023-01-23 22:23:05 +00:00
peteGSX
4acf46db54
EX-IO reads optimised for speed
2023-01-24 08:17:43 +10:00
peteGSX
20b3e9064c
Analogue inputs functioning
2023-01-23 21:35:22 +10:00
peteGSX
459904e5dd
More analogue inputs
2023-01-23 20:12:28 +10:00
peteGSX
878549d538
Working on analogue inputs
2023-01-23 16:26:07 +10:00
peteGSX
7f4e3d9cea
Digital inputs optimised
2023-01-23 11:49:23 +10:00
peteGSX
f2aeb4069f
Merge pull request #296 from DCC-EX:294-bug-report-ex-rail-signalsignalh-inverted
...
294-bug-report-ex-rail-signalsignalh-inverted
2023-01-23 04:59:54 +10:00
peteGSX
aaf25d5426
Remove excess comments
2023-01-23 04:53:39 +10:00
Neil McKechnie
705617239f
Sort out I2C timeout handling, and further I2C diagnostics.
...
Timeout handling and recovery in loop() function now operative.
Start-up check for I2C signals short to ground added.
Initial I2C device probe speed up.
Possible infinite loops in I2C AVR native driver during fault conditions removed.
2023-01-22 13:13:20 +00:00
Neil McKechnie
bfbc45674f
Update IO_AnalogueInputs.h
...
Add I2C initialisation calls (previously missing).
2023-01-22 12:38:24 +00:00
Neil McKechnie
e079a9e395
Update IO_VL53L0X.h
...
Improve address changing logic.
2023-01-22 12:37:16 +00:00
peteGSX
fb9170ab8b
SIGNAL/SIGNALH operating correctly
2023-01-22 19:25:00 +10:00
Colin Murdoch
286bdc3c4d
Create platformio.ini.original
2023-01-21 10:20:49 +00:00
Colin Murdoch
cd46d3c9e0
Remove #ifdef and merge calcs
...
Remove #idfef statements and merge duplicate routines into CommandDistributor
2023-01-21 10:18:54 +00:00
pmantoine
fb36bd1380
Fix F446 Serial Pin Comment (Rx/Tx)
2023-01-17 20:15:30 +08:00
Colin Murdoch
b62c4da04d
Update CommandDistributor.h
...
Fixed #endif typo.
2023-01-17 10:56:12 +00:00
Neil McKechnie
ccf463b507
IODevice.cpp: Fix error in overlap checking.
...
The checkNoOverlap() function didn't work correctly in the case where one device has nPins=0. All devices configured after that were rejected, even when no overlap was present.
2023-01-16 23:03:53 +00:00
Neil McKechnie
abf62dfd85
IO_VL53L0X driver: improve I2C error checking and reporting.
2023-01-16 23:00:58 +00:00
Colin Murdoch
8fac20a451
Add #ifdef selections
...
Add #ifdef selections linked to #define in config.exampe.h
2023-01-16 18:16:25 +00:00
Neil McKechnie
7c25f22939
Fix error reported in IO_DFPlayer.h when compiling for some platforms
2023-01-14 23:50:33 +00:00
Neil McKechnie
0c054c4d42
Merge branch 'devel' into devel-nmck
2023-01-14 23:37:17 +00:00
Neil McKechnie
538519dd9d
Add option to suppress I2C retries.
...
I2CRB method suppressRetries() added to allow retries to be suppressed.
2023-01-14 18:58:06 +00:00
