Merge 5d411e6a08 into dc481a2f0c

commit 2bbb5c1119
Author: Asbelos <asbelos@btinternet.com>
Date:   Fri Sep 20 12:13:21 2024 +0100

    EXRAIL use neopixel range instead of loop

commit 3aabb51888
Author: Asbelos <asbelos@btinternet.com>
Date:   Wed Sep 18 17:06:00 2024 +0100

    Neopixel signals with blue-tint

    See Release Notes file

commit 8e6fe6df21
Author: Asbelos <asbelos@btinternet.com>
Date:   Thu Sep 12 08:35:26 2024 +0100

    HAL write range

commit 66e57b5ab2
Author: Asbelos <asbelos@btinternet.com>
Date:   Sun Sep 8 09:26:37 2024 +0100

    Killblink on neopixel set.

commit 360c426675
Merge: dd16e0d b026417
Author: Asbelos <asbelos@btinternet.com>
Date:   Sat Sep 7 16:45:29 2024 +0100

    Merge branch 'devel' into devel-pauls-i2c-devices

commit dd16e0da97
Author: Asbelos <asbelos@btinternet.com>
Date:   Sat Sep 7 13:00:26 2024 +0100

    Notes

commit e823db3d24
Author: Asbelos <asbelos@btinternet.com>
Date:   Sat Sep 7 11:16:30 2024 +0100

    Neopixel change to 8,8,8

commit d3d6cc97fb
Author: Asbelos <asbelos@btinternet.com>
Date:   Fri Sep 6 13:25:44 2024 +0100

    Neopixel <o> cmd

commit 03d8d5f93d
Author: Asbelos <asbelos@btinternet.com>
Date:   Fri Sep 6 08:08:18 2024 +0100

    Its working!!

commit 235f3c82b5
Author: Asbelos <asbelos@btinternet.com>
Date:   Thu Sep 5 22:02:29 2024 +0100

    Update IO_NeoPixel.h

commit 530b77bbab
Author: Asbelos <asbelos@btinternet.com>
Date:   Tue Sep 3 15:04:40 2024 +0100

    NEOPIXEL driver and macros

commit 2a895fbbd5
Author: Asbelos <asbelos@btinternet.com>
Date:   Tue Sep 3 11:26:17 2024 +0100

    First compile neopixel driver

commit c6f2db7909
Merge: a7df84b 7395aa4
Author: Asbelos <asbelos@btinternet.com>
Date:   Tue Sep 3 10:07:12 2024 +0100

    Merge branch 'devel' into devel-pauls-i2c-devices

commit a7df84b01c
Author: Asbelos <asbelos@btinternet.com>
Date:   Tue Sep 3 09:56:05 2024 +0100

    NEOPIXEL EXRAIL

commit ead6e5afa1
Author: Asbelos <asbelos@btinternet.com>
Date:   Tue Sep 3 09:55:36 2024 +0100

    NEOPIXEL EXRAIL

commit 0cb175544e
Author: pmantoine <pma-github@milleng.com.au>
Date:   Sat Feb 24 17:29:10 2024 +0800

    More TCA8418

commit 2082051801
Author: pmantoine <pma-github@milleng.com.au>
Date:   Sat Feb 24 13:02:34 2024 +0800

    TCA8418 initial HAL driver scaffolding

CommandDistributor.cpp

@@ -37,7 +37,7 @@ int16_t lastclocktime;
 int8_t lastclockrate;
 
 
-#if WIFI_ON || ETHERNET_ON || defined(SERIAL1_COMMANDS) || defined(SERIAL2_COMMANDS) || defined(SERIAL3_COMMANDS)
+#if WIFI_ON || ETHERNET_ON || defined(SERIAL1_COMMANDS) || defined(SERIAL2_COMMANDS) || defined(SERIAL3_COMMANDS) || defined(SERIAL4_COMMANDS) || defined(SERIAL5_COMMANDS) || defined(SERIAL6_COMMANDS)
 // use a buffer to allow broadcast
 StringBuffer * CommandDistributor::broadcastBufferWriter=new StringBuffer();
 template<typename... Targs> void CommandDistributor::broadcastReply(clientType type, Targs... msg){

CommandStation-EX.ino

@@ -141,6 +141,23 @@ void setup()
   CommandDistributor::broadcastPower();
 }
 
+/**************** for future reference
+void looptimer(unsigned long timeout, const FSH* message)
+{
+  static unsigned long lasttimestamp = 0;
+  unsigned long now = micros();
+  if (timeout != 0) {
+    unsigned long diff = now - lasttimestamp;
+    if (diff > timeout) {
+      DIAG(message);
+      DIAG(F("DeltaT=%L"), diff);
+      lasttimestamp = micros();
+      return;
+    }
+  }
+  lasttimestamp = now;
+}
+*********************************************/
 void loop()
 {
   // The main sketch has responsibilities during loop()
@@ -156,6 +173,7 @@ void loop()
 #ifndef ARDUINO_ARCH_ESP32
 #if WIFI_ON
   WifiInterface::loop();
+ 
 #endif //WIFI_ON
 #else  //ARDUINO_ARCH_ESP32
 #ifndef WIFI_TASK_ON_CORE0

DCCEXParser.cpp

@@ -72,7 +72,7 @@ Once a new OPCODE is decided upon, update this list.
   M, Write DCC packet
   n, Reserved for SensorCam
   N, Reserved for Sensorcam 
-  o,
+  o, Neopixel driver (see also IO_NeoPixel.h)
   O, Output broadcast
   p, Broadcast power state
   P, Write DCC packet
@@ -117,6 +117,9 @@ Once a new OPCODE is decided upon, update this list.
 #include "Turntables.h"
 #include "version.h"
 #include "KeywordHasher.h"
+#ifdef ARDUINO_ARCH_ESP32
+#include "WifiESP32.h"
+#endif
 
 // This macro can't be created easily as a portable function because the
 // flashlist requires a far pointer for high flash access. 
@@ -140,12 +143,12 @@ byte DCCEXParser::stashTarget=0;
 // Non-DCC things like turnouts, pins and sensors are handled in additional JMRI interface classes.
 
 
-int16_t DCCEXParser::splitValues(int16_t result[MAX_COMMAND_PARAMS], const byte *cmd, bool usehex)
+int16_t DCCEXParser::splitValues(int16_t result[MAX_COMMAND_PARAMS], byte *cmd, bool usehex)
 {
     byte state = 1;
     byte parameterCount = 0;
     int16_t runningValue = 0;
-    const byte *remainingCmd = cmd + 1; // skips the opcode
+    byte *remainingCmd = cmd + 1; // skips the opcode
     bool signNegative = false;
 
     // clear all parameters in case not enough found
@@ -155,7 +158,6 @@ int16_t DCCEXParser::splitValues(int16_t result[MAX_COMMAND_PARAMS], const byte
     while (parameterCount < MAX_COMMAND_PARAMS)
     {
         byte hot = *remainingCmd;
-
         switch (state)
         {
 
@@ -169,7 +171,22 @@ int16_t DCCEXParser::splitValues(int16_t result[MAX_COMMAND_PARAMS], const byte
             state = 2;
             continue;
 
-        case 2: // checking sign
+        case 2: // checking sign or quoted string
+#ifdef HAS_ENOUGH_MEMORY
+	    if (hot == '"') {
+	      // this inserts an extra parameter 0x7777 in front
+	      // of each string parameter as a marker that can
+	      // be checked that a string parameter follows
+	      // This clashes of course with the real value
+	      // 0x7777 which we hope is used seldom
+	      result[parameterCount] = (int16_t)0x7777;
+	      parameterCount++;
+	      result[parameterCount] = (int16_t)(remainingCmd - cmd + 1);
+	      parameterCount++;
+	      state = 4;
+	      break;
+	    }
+#endif
             signNegative = false;
             runningValue = 0;
             state = 3;
@@ -200,6 +217,16 @@ int16_t DCCEXParser::splitValues(int16_t result[MAX_COMMAND_PARAMS], const byte
             parameterCount++;
             state = 1;
             continue;
+#ifdef HAS_ENOUGH_MEMORY
+	case 4: // skipover text
+	  if (hot == '\0')        // We did run to end of buffer without finding the "
+	    return -1;
+	  if (hot == '"') {
+	    *remainingCmd = '\0'; // overwrite " in command buffer with the end-of-string
+	    state = 1;
+	  }
+	  break;
+#endif
         }
         remainingCmd++;
     }
@@ -394,6 +421,35 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
             return;
         break;
 
+#ifndef IO_NO_HAL
+    case 'o':  // Neopixel pin manipulation
+        if (p[0]==0) break;
+        {  
+          VPIN vpin=p[0]>0 ? p[0]:-p[0];
+          bool setON=p[0]>0;
+          if (params==1) {  // <o [-]vpin> 
+            IODevice::write(vpin,setON);
+            return;
+          }
+          if (params==2) {  // <o [-]vpin count> 
+            IODevice::writeRange(vpin,setON,p[1]);
+            return;
+          }
+          if (params==4 || params==5) { // <z [-]vpin r g b [count]>
+             auto count=p[4]?p[4]:1;  
+             if (p[1]<0 || p[1]>0xFF) break;  
+            if (p[2]<0 || p[2]>0xFF) break;  
+            if (p[3]<0 || p[3]>0xFF) break;  
+            // strange parameter mangling... see IO_NeoPixel.h NeoPixel::_writeAnalogue
+            int colour_RG=(p[1]<<8)  | p[2];
+            uint16_t colour_B=p[3];
+            IODevice::writeAnalogueRange(vpin,colour_RG,setON,colour_B,count);
+            return;
+            }
+        }
+        break;
+#endif        
+
   case 'z':  // direct pin manipulation
         if (p[0]==0) break; 
         if (params==1) {  // <z vpin | -vpin> 
@@ -616,6 +672,19 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
         StringFormatter::send(stream, F("\n"));
         return;
     case 'C': // CONFIG <C [params]>
+#if defined(ARDUINO_ARCH_ESP32)
+// currently this only works on ESP32
+#if defined(HAS_ENOUGH_MEMORY)
+      if (p[0] == "WIFI"_hk) { 	// <C WIFI SSID PASSWORD>
+	if (params != 5)        // the 5 params 0 to 4 are (kinda): WIFI_hk 0x7777 &SSID 0x7777 &PASSWORD
+	  break;
+	if (p[1] == 0x7777 && p[3] == 0x7777) {
+	  WifiESP::setup((const char*)(com + p[2]), (const char*)(com + p[4]), WIFI_HOSTNAME, IP_PORT, WIFI_CHANNEL, WIFI_FORCE_AP);
+	}
+	return;
+      }
+#endif
+#endif //ESP32
       if (parseC(stream, params, p))
 	return;
       break;
@@ -1113,7 +1182,6 @@ bool DCCEXParser::parseC(Print *stream, int16_t params, int16_t p[]) {
 	}
         return true;
 #endif
-
     default: // invalid/unknown
       break;
     }

DCCEXParser.h

@@ -43,7 +43,7 @@ struct DCCEXParser
    private:
   
     static const int16_t MAX_BUFFER=50;  // longest command sent in
-    static int16_t splitValues( int16_t result[MAX_COMMAND_PARAMS], const byte * command, bool usehex);
+    static int16_t splitValues( int16_t result[MAX_COMMAND_PARAMS], byte * command, bool usehex);
      
     static bool parseT(Print * stream, int16_t params, int16_t p[]);
     static bool parseZ(Print * stream, int16_t params, int16_t p[]);

EXRAIL2.cpp

@@ -73,6 +73,7 @@ RMFT2 * RMFT2::pausingTask=NULL; // Task causing a PAUSE.
 byte RMFT2::flags[MAX_FLAGS];
 Print * RMFT2::LCCSerial=0;
 LookList *  RMFT2::routeLookup=NULL;
+LookList *  RMFT2::signalLookup=NULL;
 LookList *  RMFT2::onThrowLookup=NULL;
 LookList *  RMFT2::onCloseLookup=NULL;
 LookList *  RMFT2::onActivateLookup=NULL;
@@ -207,14 +208,26 @@ LookList* RMFT2::LookListLoader(OPCODE op1, OPCODE op2, OPCODE op3) {
   // Second pass startup, define any turnouts or servos, set signals red
   // add sequences onRoutines to the lookups
   if (compileFeatures & FEATURE_SIGNAL) {
+    
     onRedLookup=LookListLoader(OPCODE_ONRED);
     onAmberLookup=LookListLoader(OPCODE_ONAMBER);
     onGreenLookup=LookListLoader(OPCODE_ONGREEN);
-    for (int sigslot=0;;sigslot++) {
+    // Load the signal lookup with slot numbers in the signal table
-      int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
+    int signalCount=0; 
-      if (sighandle==0) break;  // end of signal list
+    for (int16_t slot=0;;slot++) {
-      VPIN sigid = sighandle & SIGNAL_ID_MASK;
+        SIGNAL_DEFINITION signal=getSignalSlot(slot);
-      doSignal(sigid, SIGNAL_RED);
+        DIAG(F("Signal s=%d id=%d t=%d"),slot,signal.id,signal.type);
+        if (signal.type==sigtypeNoMoreSignals) break;
+        if (signal.type==sigtypeContinuation) continue;
+        signalCount++;
+    }    
+    signalLookup=new LookList(signalCount);
+    for (int16_t slot=0;;slot++) {
+        SIGNAL_DEFINITION signal=getSignalSlot(slot);
+        if (signal.type==sigtypeNoMoreSignals) break;
+        if (signal.type==sigtypeContinuation) continue;
+        signalLookup->add(signal.id,slot);
+        doSignal(signal.id, SIGNAL_RED);
     }    
    }
 
@@ -478,10 +491,15 @@ bool RMFT2::skipIfBlock() {
 
 
 /* static */ void RMFT2::readLocoCallback(int16_t cv) {
+  if (cv <= 0) {
+    DIAG(F("CV read error"));
+    progtrackLocoId = -1;
+    return;
+  }
   if (cv & LONG_ADDR_MARKER) {               // maker bit indicates long addr
     progtrackLocoId = cv ^ LONG_ADDR_MARKER; // remove marker bit to get real long addr
     if (progtrackLocoId <= HIGHEST_SHORT_ADDR ) {     // out of range for long addr
-      DIAG(F("Long addr %d <= %d unsupported\n"), progtrackLocoId, HIGHEST_SHORT_ADDR);
+      DIAG(F("Long addr %d <= %d unsupported"), progtrackLocoId, HIGHEST_SHORT_ADDR);
       progtrackLocoId = -1;
     }
   } else {
@@ -921,11 +939,10 @@ void RMFT2::loop2() {
       delayMe(100);
       return; // still waiting for callback
     }
-    if (progtrackLocoId<0) {
-      kill(F("No Loco Found"),progtrackLocoId);
-      return; // still waiting for callback
-    }
     
+    // At failed read will result in loco == -1
+    // which is intended so it can be checked
+    // from within EXRAIL
     loco=progtrackLocoId;
     speedo=0;
     forward=true;
@@ -999,6 +1016,16 @@ void RMFT2::loop2() {
     break;
     
 #ifndef IO_NO_HAL
+  case OPCODE_NEOPIXEL: 
+    // OPCODE_NEOPIXEL,V([-]vpin),OPCODE_PAD,V(colour_RG),OPCODE_PAD,V(colour_B),OPCODE_PAD,V(count)
+    { 
+      VPIN vpin=operand>0?operand:-operand;
+      auto count=getOperand(3);
+      killBlinkOnVpin(vpin,count);
+      IODevice::writeAnalogueRange(vpin,getOperand(1),operand>0,getOperand(2),count);
+    }
+    break;
+  
   case OPCODE_WAITFORTT:  // OPCODE_WAITFOR,V(turntable_id)
     if (Turntable::ttMoving(operand)) {
       delayMe(100);
@@ -1120,26 +1147,11 @@ void RMFT2::kill(const FSH * reason, int operand) {
   delete this;
 }
 
-int16_t RMFT2::getSignalSlot(int16_t id) {
 
-  if (id > 0) {
+SIGNAL_DEFINITION RMFT2::getSignalSlot(int16_t slot) {
-    int sigslot = 0;
+  SIGNAL_DEFINITION signal;
-    int16_t sighandle = 0;
+  COPYHIGHFLASH(&signal,SignalDefinitions,slot*sizeof(SIGNAL_DEFINITION),sizeof(SIGNAL_DEFINITION));
-    // Trundle down the signal list until we reach the end
+  return signal;
-    while ((sighandle = GETHIGHFLASHW(RMFT2::SignalDefinitions, sigslot * 8)) != 0)
-    {
-      // sigid is the signal id used in RED/AMBER/GREEN macro
-      // for a LED signal it will be same as redpin
-      // but for a servo signal it will also have SERVO_SIGNAL_FLAG set.
-      VPIN sigid = sighandle & SIGNAL_ID_MASK;
-      if (sigid == (VPIN)id) // cast to keep compiler happy but id is positive
-        return sigslot;      // found it
-      sigslot++;             // keep looking
-    };
-  }
-  // If we got here, we did not find the signal
-  DIAG(F("EXRAIL Signal %d not defined"), id);
-  return -1;
 }
 
 /* static */ void RMFT2::doSignal(int16_t id,char rag) {
@@ -1152,81 +1164,97 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
   else if (rag==SIGNAL_GREEN) onGreenLookup->handleEvent(F("GREEN"),id);
   else onAmberLookup->handleEvent(F("AMBER"),id);
   
-  int16_t sigslot=getSignalSlot(id);
+  auto sigslot=signalLookup->find(id);
   if (sigslot<0) return; 
   
   // keep track of signal state 
   setFlag(sigslot,rag,SIGNAL_MASK);
  
   // Correct signal definition found, get the rag values
-  int16_t sigpos=sigslot*8; 
+  auto signal=getSignalSlot(sigslot);
-  int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos);
-  VPIN redpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+2);
-  VPIN amberpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+4);
-  VPIN greenpin=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+6);
-  //if (diag) DIAG(F("signal %d %d %d %d %d"),sigid,id,redpin,amberpin,greenpin);
   
-  VPIN sigtype=sighandle & ~SIGNAL_ID_MASK;
+  switch (signal.type) {
-  VPIN sigid = sighandle & SIGNAL_ID_MASK;
+  case sigtypeSERVO: 
-
+    { 
-  if (sigtype == SERVO_SIGNAL_FLAG) {
+    auto servopos = rag==SIGNAL_RED? signal.redpin: (rag==SIGNAL_GREEN? signal.greenpin : signal.amberpin);
-    // A servo signal, the pin numbers are actually servo positions
-    // Note, setting a signal to a zero position has no effect.
-    int16_t servopos= rag==SIGNAL_RED? redpin: (rag==SIGNAL_GREEN? greenpin : amberpin);
     //if (diag) DIAG(F("sigA %d %d"),id,servopos);
     if  (servopos!=0) IODevice::writeAnalogue(id,servopos,PCA9685::Bounce);
     return;  
    }
 
-  
+  case sigtypeDCC:
-  if (sigtype== DCC_SIGNAL_FLAG) {
+   {
     // redpin,amberpin are the DCC addr,subaddr 
-    DCC::setAccessory(redpin,amberpin, rag!=SIGNAL_RED);
+    DCC::setAccessory(signal.redpin,signal.amberpin, rag!=SIGNAL_RED);
     return; 
   }
 
- if (sigtype== DCCX_SIGNAL_FLAG) {
+ case sigtypeDCCX:
+  {
     // redpin,amberpin,greenpin are the 3 aspects
-    byte value=redpin;
+    auto value=signal.redpin;
-    if (rag==SIGNAL_AMBER) value=amberpin;
+    if (rag==SIGNAL_AMBER) value=signal.amberpin;
-    if (rag==SIGNAL_GREEN) value=greenpin; 
+    if (rag==SIGNAL_GREEN) value=signal.greenpin; 
-    DCC::setExtendedAccessory(sigid, value);
+    DCC::setExtendedAccessory(id, value);
     return; 
   }
 
+case sigtypeNEOPIXEL: 
+  {
+    // redpin,amberpin,greenpin are the 3 RG values but with no blue permitted. . (code limitation hack) 
+    auto colour_RG=signal.redpin;
+    if (rag==SIGNAL_AMBER) colour_RG=signal.amberpin;
+    if (rag==SIGNAL_GREEN) colour_RG=signal.greenpin; 
 
+    // blue channel is in followng signal slot (a continuation)
+    auto signal2=getSignalSlot(sigslot+1);
+    auto colour_B=signal2.redpin;
+    if (rag==SIGNAL_AMBER) colour_B=signal2.amberpin;
+    if (rag==SIGNAL_GREEN) colour_B=signal2.greenpin; 
+    IODevice::writeAnalogue(id, colour_RG,true,colour_B);
+    return; 
+  }
+  
+  case sigtypeSIGNAL:
+  case sigtypeSIGNALH:
+  {
   // LED or similar 3 pin signal, (all pins zero would be a virtual signal)
   // If amberpin is zero, synthesise amber from red+green
   const byte SIMAMBER=0x00;
-  if (rag==SIGNAL_AMBER && (amberpin==0)) rag=SIMAMBER; // special case this func only
+  if (rag==SIGNAL_AMBER && (signal.amberpin==0)) rag=SIMAMBER; // special case this func only
    
   // Manage invert (HIGH on) pins
-  bool aHigh=sighandle & ACTIVE_HIGH_SIGNAL_FLAG;
+  bool aHigh=signal.type==sigtypeSIGNALH;
       
   // set the three pins 
-  if (redpin) {
+  if (signal.redpin) {
     bool redval=(rag==SIGNAL_RED || rag==SIMAMBER);
     if (!aHigh) redval=!redval;
-    killBlinkOnVpin(redpin);
+    killBlinkOnVpin(signal.redpin);
-    IODevice::write(redpin,redval);
+    IODevice::write(signal.redpin,redval);
   }
-  if (amberpin) {
+  if (signal.amberpin) {
     bool amberval=(rag==SIGNAL_AMBER);
     if (!aHigh) amberval=!amberval;
-    killBlinkOnVpin(amberpin);
+    killBlinkOnVpin(signal.amberpin);
-    IODevice::write(amberpin,amberval);
+    IODevice::write(signal.amberpin,amberval);
   }
-  if (greenpin) {
+  if (signal.greenpin) {
     bool greenval=(rag==SIGNAL_GREEN || rag==SIMAMBER);
     if (!aHigh) greenval=!greenval;
-    killBlinkOnVpin(greenpin);
+    killBlinkOnVpin(signal.greenpin);
-    IODevice::write(greenpin,greenval);
+    IODevice::write(signal.greenpin,greenval);
+  }
+}
+  case sigtypeVIRTUAL: break;
+  case sigtypeContinuation: break;
+  case sigtypeNoMoreSignals: break;
   }
 }
 
 /* static */ bool RMFT2::isSignal(int16_t id,char rag) {
   if (!(compileFeatures & FEATURE_SIGNAL)) return false; 
-  int16_t sigslot=getSignalSlot(id);
+  int16_t sigslot=signalLookup->find(id);
   if (sigslot<0) return false; 
   return (flags[sigslot] & SIGNAL_MASK) == rag;
 }
@@ -1238,26 +1266,23 @@ int16_t RMFT2::getSignalSlot(int16_t id) {
 // Otherwise false so the parser should send the command directly 
 bool RMFT2::signalAspectEvent(int16_t address, byte aspect ) {
   if (!(compileFeatures & FEATURE_SIGNAL)) return false; 
-  int16_t sigslot=getSignalSlot(address);
+  auto sigslot=signalLookup->find(address);
   if (sigslot<0) return false;  // this is not a defined signal 
-  int16_t sigpos=sigslot*8; 
+  auto signal=getSignalSlot(sigslot);
-  int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos);
+  if (signal.type!=sigtypeDCCX) return false; // not a DCCX signal
-  VPIN sigtype=sighandle & ~SIGNAL_ID_MASK;
-  VPIN sigid = sighandle & SIGNAL_ID_MASK;
-  if (sigtype!=DCCX_SIGNAL_FLAG) return false; // not a DCCX signal
   // Turn an aspect change into a RED/AMBER/GREEN setting
-  if (aspect==GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+2)) {
+  if (aspect==signal.redpin) {
-      doSignal(sigid,SIGNAL_RED);
+      doSignal(address,SIGNAL_RED);
       return true;
   }
   
-  if (aspect==GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+4)) {
+  if (aspect==signal.amberpin) {
-      doSignal(sigid,SIGNAL_AMBER);
+      doSignal(address,SIGNAL_AMBER);
       return true;
   }
   
-  if (aspect==GETHIGHFLASHW(RMFT2::SignalDefinitions,sigpos+6)) {
+  if (aspect==signal.greenpin) {
-      doSignal(sigid,SIGNAL_GREEN);
+      doSignal(address,SIGNAL_GREEN);
       return true;
   }
 
@@ -1311,19 +1336,24 @@ void RMFT2::powerEvent(int16_t track, bool overload) {
 // This function is used when setting pins so that a SET or RESET
 // will cause any blink task on that pin to terminate.
 // It will be compiled out of existence if no BLINK feature is used.
-void RMFT2::killBlinkOnVpin(VPIN pin) {
+void RMFT2::killBlinkOnVpin(VPIN pin, uint16_t count) {
    if (!(compileFeatures & FEATURE_BLINK)) return; 
  
+  RMFT2 * stoptask=loopTask; // stop when we get back to here
   RMFT2 * task=loopTask;
+  VPIN lastPin=pin+count-1;
   while(task) {
+    auto nextTask=task->next;
     if (
       (task->blinkState==blink_high || task->blinkState==blink_low) 
-       && task->blinkPin==pin) {
+       && task->blinkPin>=pin
+       && task->blinkPin<=lastPin
+       )    {
+        if (diag)  DIAG(F("kill blink %d"),task->blinkPin,lastPin);
         task->kill();
-        return;
        }
-    task=task->next;
+    task=nextTask;
-    if (task==loopTask) return;
+    if (task==stoptask) return;
   }
 }
   

EXRAIL2.h

@@ -76,6 +76,7 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,OPCODE_TOGGLE_TURNOUT,
              OPCODE_ROUTE_DISABLED,
              OPCODE_STASH,OPCODE_CLEAR_STASH,OPCODE_CLEAR_ALL_STASH,OPCODE_PICKUP_STASH,
              OPCODE_ONBUTTON,OPCODE_ONSENSOR,             
+             OPCODE_NEOPIXEL,
              // OPcodes below this point are skip-nesting IF operations
              // placed here so that they may be skipped as a group
              // see skipIfBlock()
@@ -109,6 +110,23 @@ enum BlinkState: byte {
     blink_high, // blink task running with pin high 
     at_timeout  // ATTIMEOUT timed out flag
     }; 
+enum SignalType {
+       sigtypeVIRTUAL,
+       sigtypeSIGNAL, 
+       sigtypeSIGNALH, 
+       sigtypeDCC,
+       sigtypeDCCX,
+       sigtypeSERVO,
+       sigtypeNEOPIXEL,
+       sigtypeContinuation,  // neopixels require a second line
+       sigtypeNoMoreSignals
+       }; 
+
+  struct SIGNAL_DEFINITION {
+       SignalType type;
+       VPIN id;  
+       VPIN  redpin,amberpin,greenpin; 
+  };
 
   // Flag bits for compile time features.
   static const byte FEATURE_SIGNAL= 0x80;
@@ -170,11 +188,6 @@ class LookList {
     static void rotateEvent(int16_t id, bool change);
     static void powerEvent(int16_t track, bool overload);
     static bool signalAspectEvent(int16_t address, byte aspect );    
-    static const int16_t SERVO_SIGNAL_FLAG=0x4000;
-    static const int16_t ACTIVE_HIGH_SIGNAL_FLAG=0x2000;
-    static const int16_t DCC_SIGNAL_FLAG=0x1000;
-    static const int16_t DCCX_SIGNAL_FLAG=0x3000;
-    static const int16_t SIGNAL_ID_MASK=0x0FFF;
     // Throttle Info Access functions built by exrail macros 
   static const byte rosterNameCount;
   static const int16_t HIGHFLASH routeIdList[];
@@ -190,6 +203,7 @@ class LookList {
   static void startNonRecursiveTask(const FSH* reason, int16_t id,int pc);
   static bool readSensor(uint16_t sensorId);
   static bool isSignal(int16_t id,char rag);
+  static SIGNAL_DEFINITION getSignalSlot(int16_t slotno); 
    
 private: 
     static void ComandFilter(Print * stream, byte & opcode, byte & paramCount, int16_t p[]);
@@ -199,7 +213,6 @@ private:
     static bool getFlag(VPIN id,byte mask); 
     static int16_t progtrackLocoId;
     static void doSignal(int16_t id,char rag); 
-    static int16_t getSignalSlot(int16_t id);
     static void setTurnoutHiddenState(Turnout * t);
     #ifndef IO_NO_HAL
     static void setTurntableHiddenState(Turntable * tto);
@@ -207,7 +220,7 @@ private:
     static LookList* LookListLoader(OPCODE op1,
                       OPCODE op2=OPCODE_ENDEXRAIL,OPCODE op3=OPCODE_ENDEXRAIL);
     static uint16_t getOperand(int progCounter,byte n);
-    static void killBlinkOnVpin(VPIN pin);
+    static void killBlinkOnVpin(VPIN pin,uint16_t count=1);
     static RMFT2 * loopTask;
     static RMFT2 * pausingTask;
     void delayMe(long millisecs);
@@ -223,10 +236,11 @@ private:
     
    static bool diag;
    static const  HIGHFLASH3  byte RouteCode[];
-   static const  HIGHFLASH  int16_t SignalDefinitions[];
+   static const  HIGHFLASH  SIGNAL_DEFINITION SignalDefinitions[];
    static byte flags[MAX_FLAGS];
    static Print * LCCSerial;
    static LookList * routeLookup;
+   static LookList * signalLookup;
    static LookList * onThrowLookup;
    static LookList * onCloseLookup;
    static LookList * onActivateLookup;

EXRAIL2MacroReset.h

@@ -99,6 +99,9 @@
 #undef LCCX 
 #undef LCN 
 #undef MOVETT
+#undef NEOPIXEL
+#undef NEOPIXEL_OFF
+#undef NEOPIXEL_SIGNAL
 #undef ACON
 #undef ACOF
 #undef ONACON
@@ -269,6 +272,8 @@
 #define LCN(msg) 
 #define MESSAGE(msg)
 #define MOVETT(id,steps,activity)
+#define NEOPIXEL(id,r,g,b,count...)
+#define NEOPIXEL_SIGNAL(sigid,redcolour,ambercolour,greencolour)
 #define ACON(eventid)
 #define ACOF(eventid)
 #define ONACON(eventid)

EXRAIL2Parser.cpp

@@ -252,13 +252,13 @@ bool RMFT2::parseSlash(Print * stream, byte & paramCount, int16_t p[]) {
       // do the signals
       // flags[n] represents the state of the nth signal in the table 
       for (int sigslot=0;;sigslot++) {
-        int16_t sighandle=GETHIGHFLASHW(RMFT2::SignalDefinitions,sigslot*8);
+        SIGNAL_DEFINITION slot=getSignalSlot(sigslot);
-        if (sighandle==0) break; // end of signal list
+        if (slot.type==sigtypeNoMoreSignals) break; // end of signal list
-	VPIN sigid = sighandle & SIGNAL_ID_MASK;
+	      if (slot.type==sigtypeContinuation) continue; // continueation of previous line
-	byte flag=flags[sigslot] & SIGNAL_MASK; // obtain signal flags for this id
+	      byte flag=flags[sigslot] & SIGNAL_MASK; // obtain signal flags for this ids
         StringFormatter::send(stream,F("\n%S[%d]"), 
 			      (flag == SIGNAL_RED)? F("RED") : (flag==SIGNAL_GREEN) ? F("GREEN") : F("AMBER"),
-			      sigid);
+			      slot.id);
       } 
     }
 

EXRAILMacros.h

@@ -71,6 +71,8 @@
 //const byte TRACK_POWER_0=0, TRACK_POWER_OFF=0;    
 //const byte TRACK_POWER_1=1, TRACK_POWER_ON=1;   
 
+// NEOPIXEL RG generator for NEOPIXEL_SIGNAL 
+#define NeoRGB(red,green,blue) (((uint32_t)(red & 0xff)<<16) | ((uint32_t)(green & 0xff)<<8) | (uint32_t)(blue & 0xff))  
 
 // Pass 1 Implements aliases 
 #include "EXRAIL2MacroReset.h"
@@ -180,6 +182,8 @@ bool exrailHalSetup() {
 #define DCC_SIGNAL(id,addr,subaddr) | FEATURE_SIGNAL
 #undef DCCX_SIGNAL
 #define DCCX_SIGNAL(id,redAspect,amberAspect,greenAspect) | FEATURE_SIGNAL
+#undef NEOPIXEL_SIGNAL
+#define NEOPIXEL_SIGNAL(sigid,redcolour,ambercolour,greencolour) | FEATURE_SIGNAL
 #undef VIRTUAL_SIGNAL
 #define VIRTUAL_SIGNAL(id) | FEATURE_SIGNAL
 
@@ -421,21 +425,26 @@ const FSH * RMFT2::getRosterFunctions(int16_t id) {
 // Pass 8 Signal definitions
 #include "EXRAIL2MacroReset.h"
 #undef SIGNAL
-#define SIGNAL(redpin,amberpin,greenpin) redpin,redpin,amberpin,greenpin, 
+#define SIGNAL(redpin,amberpin,greenpin) {sigtypeSIGNAL,redpin,redpin,amberpin,greenpin}, 
 #undef SIGNALH
-#define SIGNALH(redpin,amberpin,greenpin) redpin | RMFT2::ACTIVE_HIGH_SIGNAL_FLAG,redpin,amberpin,greenpin, 
+#define SIGNALH(redpin,amberpin,greenpin) {sigtypeSIGNALH,redpin,redpin,amberpin,greenpin}, 
 #undef SERVO_SIGNAL
-#define SERVO_SIGNAL(vpin,redval,amberval,greenval) vpin | RMFT2::SERVO_SIGNAL_FLAG,redval,amberval,greenval, 
+#define SERVO_SIGNAL(vpin,redval,amberval,greenval) {sigtypeSERVO,vpin,redval,amberval,greenval}, 
 #undef DCC_SIGNAL
-#define DCC_SIGNAL(id,addr,subaddr) id | RMFT2::DCC_SIGNAL_FLAG,addr,subaddr,0,
+#define DCC_SIGNAL(id,addr,subaddr) {sigtypeDCC,id,addr,subaddr,0},
 #undef DCCX_SIGNAL
-#define DCCX_SIGNAL(id,redAspect,amberAspect,greenAspect) id | RMFT2::DCCX_SIGNAL_FLAG,redAspect,amberAspect,greenAspect,
+#define DCCX_SIGNAL(id,redAspect,amberAspect,greenAspect) {sigtypeDCCX,id,redAspect,amberAspect,greenAspect},
+#undef NEOPIXEL_SIGNAL
+#define NEOPIXEL_SIGNAL(id,redRGB,amberRGB,greenRGB) \
+        {sigtypeNEOPIXEL,id,((VPIN)((redRGB)>>8)), ((VPIN)((amberRGB)>>8)), ((VPIN)((greenRGB)>>8))},\
+        {sigtypeContinuation,id,((VPIN)((redRGB) & 0xff)), ((VPIN)((amberRGB) & 0xFF)), ((VPIN)((greenRGB) & 0xFF))},
 #undef VIRTUAL_SIGNAL
-#define VIRTUAL_SIGNAL(id) id,0,0,0,
+#define VIRTUAL_SIGNAL(id) {sigtypeVIRTUAL,id,0,0,0},
 
-const  HIGHFLASH  int16_t RMFT2::SignalDefinitions[] = {
+const  HIGHFLASH  SIGNAL_DEFINITION RMFT2::SignalDefinitions[] = {
     #include "myAutomation.h"
-    0,0,0,0 };
+     {sigtypeNoMoreSignals,0,0,0,0}
+    };
 
 // Pass 9 ONLCC/ ONMERG counter and lookup array
 #include "EXRAIL2MacroReset.h"
@@ -552,6 +561,12 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 #define LCN(msg) PRINT(msg)
 #define MESSAGE(msg) PRINT(msg)
 #define MOVETT(id,steps,activity) OPCODE_SERVO,V(id),OPCODE_PAD,V(steps),OPCODE_PAD,V(EXTurntable::activity),OPCODE_PAD,V(0),
+#define NEOPIXEL(id,r,g,b,count...) OPCODE_NEOPIXEL,V(id),\
+        OPCODE_PAD,V(((r & 0xff)<<8) | (g & 0xff)),\
+        OPCODE_PAD,V((b & 0xff)),\
+        OPCODE_PAD,V(#count[0]?(count+0):1),
+         
+#define NEOPIXEL_SIGNAL(sigid,redcolour,ambercolour,greencolour)
 #define ONACTIVATE(addr,subaddr) OPCODE_ONACTIVATE,V(addr<<2|subaddr),
 #define ONACTIVATEL(linear) OPCODE_ONACTIVATE,V(linear+3),
 #define ONAMBER(signal_id) OPCODE_ONAMBER,V(signal_id),

EthernetInterface.cpp

@@ -29,77 +29,93 @@
 #include "CommandDistributor.h"
 #include "WiThrottle.h"
 #include "DCCTimer.h"
+#if __has_include ( "MDNS_Generic.h")
+  #include "MDNS_Generic.h"
+  #define DO_MDNS 
+  EthernetUDP udp;
+  MDNS mdns(udp);
+#endif
+
+bool EthernetInterface::connected=false;
+EthernetServer * EthernetInterface::server= nullptr;
+EthernetClient EthernetInterface::clients[MAX_SOCK_NUM];                // accept up to MAX_SOCK_NUM client connections at the same time; This depends on the chipset used on the Shield
+uint8_t EthernetInterface::buffer[MAX_ETH_BUFFER+1];                    // buffer used by TCP for the recv
+RingStream * EthernetInterface::outboundRing = nullptr;
 
-EthernetInterface * EthernetInterface::singleton=NULL;
 /**
  * @brief Setup Ethernet Connection
  * 
  */
-void EthernetInterface::setup()
-{
-  if (singleton!=NULL) {
-    DIAG(F("Prog Error!"));
-    return;
-  }
-  if ((singleton=new EthernetInterface()))
-    return;
-  DIAG(F("Ethernet not initialized"));
-};
 
+void EthernetInterface::setup()  // STM32 VERSION
+{
+  DIAG(F("Ethernet begin"
+  #ifdef DO_MDNS
+    " with mDNS"
+  #endif 
+  ));
+  
+  #ifdef STM32_ETHERNET
+    // Set a HOSTNAME for the DHCP request - a nice to have, but hard it seems on LWIP for STM32
+    // The default is "lwip", which is **always** set in STM32Ethernet/src/utility/ethernetif.cpp
+    // for some reason. One can edit it to instead read:
+    //      #if LWIP_NETIF_HOSTNAME
+    //      /* Initialize interface hostname */
+    //      if (netif->hostname == NULL)
+    //         netif->hostname = "lwip";
+    //      #endif /* LWIP_NETIF_HOSTNAME */
+    // Which seems more useful! We should propose the patch... so the following line actually works!
+    netif_set_hostname(&gnetif, WIFI_HOSTNAME);   // Should probably be passed in the contructor...
+  #endif   
+
+    byte mac[6];
+    DCCTimer::getSimulatedMacAddress(mac);
   
   #ifdef IP_ADDRESS
     static IPAddress myIP(IP_ADDRESS);
-#endif
-
-/**
- * @brief Aquire IP Address from DHCP and start server
- * 
- * @return true 
- * @return false 
- */
-EthernetInterface::EthernetInterface()
-{
-    byte mac[6];
-    DCCTimer::getSimulatedMacAddress(mac);
-    connected=false;
-   
-#ifdef IP_ADDRESS
     Ethernet.begin(mac,myIP);
   #else
     if (Ethernet.begin(mac)==0)
   {
-        DIAG(F("Ethernet.begin FAILED"));
+    LCD(4,F("IP: No DHCP"));
     return;
   }
   #endif
-    if (Ethernet.hardwareStatus() == EthernetNoHardware) {
+
-      DIAG(F("Ethernet shield not found or W5100"));
+  auto ip = Ethernet.localIP();    // look what IP was obtained (dynamic or static)
+  if (!ip) {
+    LCD(4,F("IP: None"));
+    return;
+  }
+  server = new EthernetServer(IP_PORT); // Ethernet Server listening on default port IP_PORT
+  server->begin();
+
+  // Arrange display of IP address and port
+  #ifdef LCD_DRIVER
+    const byte lcdData[]={LCD_DRIVER};
+    const bool wideDisplay=lcdData[1]>=24; // data[1] is cols. 
+  #else 
+    const bool wideDisplay=true;
+  #endif    
+  if (wideDisplay) {
+    // OLEDS or just usb diag is ok on one line. 
+    LCD(4,F("IP %d.%d.%d.%d:%d"), ip[0], ip[1], ip[2], ip[3], IP_PORT);    
+  } 
+  else { // LCDs generally too narrow, so take 2 lines
+    LCD(4,F("IP %d.%d.%d.%d"), ip[0], ip[1], ip[2], ip[3]);
+    LCD(5,F("Port %d"), IP_PORT);
   }
  
-    unsigned long startmilli = millis();
+  outboundRing=new RingStream(OUTBOUND_RING_SIZE);
-    while ((millis() - startmilli) < 5500) { // Loop to give time to check for cable connection
+  #ifdef DO_MDNS
-        if (Ethernet.linkStatus() == LinkON)
+    mdns.begin(Ethernet.localIP(), WIFI_HOSTNAME); // hostname
-            break;
+    mdns.addServiceRecord(WIFI_HOSTNAME "._withrottle", IP_PORT, MDNSServiceTCP);
-        DIAG(F("Ethernet waiting for link (1sec) "));
+  // Not sure if we need to run it once, but just in case!
-        delay(1000);
+    mdns.run();
-    }
+  #endif  
-    // now we either do have link of we have a W5100
+  connected=true;    
-    // where we do not know if we have link. That's
-    // the reason to now run checkLink.
-    // CheckLinks sets up outboundRing if it does
-    // not exist yet as well.
-    checkLink();
 }
 
-/**
- * @brief Cleanup any resources
- * 
- * @return none
- */
-EthernetInterface::~EthernetInterface() {
-  delete server;
-  delete outboundRing;
-}
 
 /**
  * @brief Main loop for the EthernetInterface
@@ -107,134 +123,132 @@ EthernetInterface::~EthernetInterface() {
  */
 void EthernetInterface::loop()
 {
-    if (!singleton || (!singleton->checkLink()))
+    if (!connected) return;
-      return;
         
+    static bool warnedAboutLink=false;
+    if (Ethernet.linkStatus() == LinkOFF){
+        if (warnedAboutLink) return;
+        DIAG(F("Ethernet link OFF"));
+        warnedAboutLink=true;
+        return;
+    }
+    
+    // link status must be ok here 
+    if (warnedAboutLink) {
+      DIAG(F("Ethernet link RESTORED"));
+      warnedAboutLink=false;
+    } 
+    
+  #ifdef DO_MDNS
+    // Always do this because we don't want traffic to intefere with being found!
+    mdns.run();
+  #endif
+
+    //
     switch (Ethernet.maintain()) {
     case 1:
         //renewed fail
         DIAG(F("Ethernet Error: renewed fail"));
-        singleton=NULL;
+        connected=false;
         return;
     case 3:
         //rebind fail
         DIAG(F("Ethernet Error: rebind fail"));
-        singleton=NULL;
+        connected=false;
         return;
     default:
         //nothing happened
+        //DIAG(F("maintained"));
         break;
     }
-   singleton->loop2();
-}
     
-/**
- * @brief Checks ethernet link cable status and detects when it connects / disconnects
- * 
- * @return true when cable is connected, false otherwise
- */
-bool EthernetInterface::checkLink() {
-  if (Ethernet.linkStatus() != LinkOFF) { // check for not linkOFF instead of linkON as the W5100 does return LinkUnknown
-    //if we are not connected yet, setup a new server
-    if(!connected) {
-      DIAG(F("Ethernet cable connected"));
-      connected=true;
-      #ifdef IP_ADDRESS
-      Ethernet.setLocalIP(myIP);      // for static IP, set it again
-      #endif
-      IPAddress ip = Ethernet.localIP();    // look what IP was obtained (dynamic or static)
-      server = new EthernetServer(IP_PORT); // Ethernet Server listening on default port IP_PORT
-      server->begin();
-      LCD(4,F("IP: %d.%d.%d.%d"), ip[0], ip[1], ip[2], ip[3]);
-      LCD(5,F("Port:%d"), IP_PORT);
-      // only create a outboundRing it none exists, this may happen if the cable
-      // gets disconnected and connected again
-      if(!outboundRing)
-	outboundRing=new RingStream(OUTBOUND_RING_SIZE);
-    }
-    return true;
-  } else { // connected
-    DIAG(F("Ethernet cable disconnected"));
-    connected=false;
-    //clean up any client
-    for (byte socket = 0; socket < MAX_SOCK_NUM; socket++) {
-      if(clients[socket].connected())
-	clients[socket].stop();
-    }
-    // tear down server
-    delete server;
-    server = nullptr;
-    LCD(4,F("IP: None"));
-  }
-  return false;
-}
-
-void EthernetInterface::loop2() {
-    if (!outboundRing) { // no idea to call loop2() if we can't handle outgoing data in it
-      if (Diag::ETHERNET) DIAG(F("No outboundRing"));
-      return;
-    }
       // get client from the server
-    EthernetClient client = server->accept();
+  #if defined (STM32_ETHERNET)
-
+    // STM32Ethernet doesn't use accept(), just available()
+    auto client = server->available();
+    if (client) {
       // check for new client
-    if (client)
-    {
-        if (Diag::ETHERNET) DIAG(F("Ethernet: New client "));
       byte socket;
+      bool sockfound = false;
+      for (socket = 0; socket < MAX_SOCK_NUM; socket++)
+      {
+        if (client == clients[socket])
+        {
+          sockfound = true;
+          break;
+        }
+      }
+      if (!sockfound)
+      { // new client
         for (socket = 0; socket < MAX_SOCK_NUM; socket++)
         {
           if (!clients[socket])
           {
-                // On accept() the EthernetServer doesn't track the client anymore
-                // so we store it in our client array
-                if (Diag::ETHERNET) DIAG(F("Socket %d"),socket);
             clients[socket] = client;
+            sockfound=true;
+            if (Diag::ETHERNET)
+              DIAG(F("Ethernet: New client socket %d"), socket);
             break;
           }
         }
-        if (socket==MAX_SOCK_NUM) DIAG(F("new Ethernet OVERFLOW")); 
       }
+      if (!sockfound) DIAG(F("new Ethernet OVERFLOW"));
+    }
+  
+  #else
+    auto client = server->accept();
+    if (client) clients[client.getSocketNumber()]=client;
+  #endif
+    
 
     // check for incoming data from all possible clients
     for (byte socket = 0; socket < MAX_SOCK_NUM; socket++)
     {
-        if (clients[socket]) {
+      if (!clients[socket]) continue; // socket is not in use
 	
-        int available=clients[socket].available();
+	    // read any bytes from this client
-        if (available > 0) {
+	    auto count = clients[socket].read(buffer, MAX_ETH_BUFFER);
-            if (Diag::ETHERNET)  DIAG(F("Ethernet: available socket=%d,avail=%d"), socket, available);
+      
-            // read bytes from a client
+      if (count<0) continue;  // -1 indicates nothing to read
-            int count = clients[socket].read(buffer, MAX_ETH_BUFFER);
+	    
+      if (count > 0) {  // we have incoming data 
 	      buffer[count] = '\0'; // terminate the string properly
-            if (Diag::ETHERNET) DIAG(F(",count=%d:%e"), socket,buffer);
+	      if (Diag::ETHERNET) DIAG(F("Ethernet s=%d, c=%d b=:%e"), socket, count, buffer);
 	      // execute with data going directly back
 	      CommandDistributor::parse(socket,buffer,outboundRing);
 	      return; // limit the amount of processing that takes place within 1 loop() cycle. 
 	    }
-        }
-    }
 	    
-    // stop any clients which disconnect
+      // count=0 The client has disconnected
-   for (int socket = 0; socket<MAX_SOCK_NUM; socket++) {
-     if (clients[socket] && !clients[socket].connected()) {
 	    clients[socket].stop();
 	    CommandDistributor::forget(socket);
 	    if (Diag::ETHERNET)  DIAG(F("Ethernet: disconnect %d "), socket);
 	  }
-    }
 	
     WiThrottle::loop(outboundRing);
 
     // handle at most 1 outbound transmission 
-    int socketOut=outboundRing->read();
+    auto socketOut=outboundRing->read();
+    if (socketOut<0) return;  // no outbound pending
+
     if (socketOut >= MAX_SOCK_NUM) {
-      DIAG(F("Ethernet outboundRing socket=%d error"), socketOut);
+      // This is a catastrophic code failure and unrecoverable.  
-    } else if (socketOut >= 0) {
+      DIAG(F("Ethernet outboundRing s=%d error"), socketOut);
-      int count=outboundRing->count();
+      connected=false;
-      if (Diag::ETHERNET) DIAG(F("Ethernet reply socket=%d, count=:%d"), socketOut,count);
+      return;
-      for(;count>0;count--)  clients[socketOut].write(outboundRing->read());
-      clients[socketOut].flush(); //maybe 
     } 
+
+    auto count=outboundRing->count();
+    {
+	    char tmpbuf[count+1]; // one extra for '\0'
+	    for(int i=0;i<count;i++) {
+	      tmpbuf[i] = outboundRing->read();
+	    }
+	    tmpbuf[count]=0;
+	    if (Diag::ETHERNET) DIAG(F("Ethernet reply s=%d, c=%d, b:%e"),
+                              socketOut,count,tmpbuf);
+	    clients[socketOut].write(tmpbuf,count);
+    }
+    
 }
 #endif

EthernetInterface.h

@@ -35,6 +35,14 @@
 #if defined (ARDUINO_TEENSY41)
  #include <NativeEthernet.h>         //TEENSY Ethernet Treiber
  #include <NativeEthernetUdp.h>   
+#elif defined (ARDUINO_NUCLEO_F429ZI) || defined (ARDUINO_NUCLEO_F439ZI) || defined (ARDUINO_NUCLEO_F4X9ZI)
+ #include <LwIP.h>
+//  #include "STM32lwipopts.h"
+ #include <STM32Ethernet.h>
+ #include <lwip/netif.h>
+ extern "C" struct netif gnetif;
+ #define STM32_ETHERNET
+ #define MAX_SOCK_NUM 8
 #else
  #include "Ethernet.h"
 #endif
@@ -45,7 +53,7 @@
  * 
  */
 
-#define MAX_ETH_BUFFER 512
+#define MAX_ETH_BUFFER 128
 #define OUTBOUND_RING_SIZE 2048
 
 class EthernetInterface {
@@ -56,16 +64,11 @@ class EthernetInterface {
      static void loop();
    
  private:
-    static EthernetInterface * singleton;
+    static bool connected;
-    bool connected;
+    static EthernetServer * server;
-    EthernetInterface();
+    static EthernetClient clients[MAX_SOCK_NUM];                // accept up to MAX_SOCK_NUM client connections at the same time; This depends on the chipset used on the Shield
-    ~EthernetInterface();
+    static uint8_t buffer[MAX_ETH_BUFFER+1];                    // buffer used by TCP for the recv
-    void loop2();
+    static RingStream * outboundRing;
-    bool checkLink();
-    EthernetServer * server = NULL;
-    EthernetClient clients[MAX_SOCK_NUM];                // accept up to MAX_SOCK_NUM client connections at the same time; This depends on the chipset used on the Shield
-    uint8_t buffer[MAX_ETH_BUFFER+1];                    // buffer used by TCP for the recv
-    RingStream * outboundRing = NULL;
 };
 
 #endif

FSH.h

@@ -52,6 +52,7 @@ typedef __FlashStringHelper FSH;
 #define STRNCPY_P strncpy_P
 #define STRNCMP_P strncmp_P
 #define STRLEN_P strlen_P
+#define STRCHR_P strchr_P 
 
 #if defined(ARDUINO_AVR_MEGA) || defined(ARDUINO_AVR_MEGA2560)
 // AVR_MEGA memory deliberately placed at end of link may need _far functions
@@ -60,6 +61,8 @@ typedef __FlashStringHelper FSH;
 #define GETFARPTR(data) pgm_get_far_address(data)
 #define GETHIGHFLASH(data,offset) pgm_read_byte_far(GETFARPTR(data)+offset)
 #define GETHIGHFLASHW(data,offset) pgm_read_word_far(GETFARPTR(data)+offset)
+#define COPYHIGHFLASH(target,base,offset,length) \
+  memcpy_PF(target,GETFARPTR(base) + offset,length)  
 #else
 // AVR_UNO/NANO runtime does not support _far functions so just use _near equivalent
 // as there is no progmem above 32kb anyway.
@@ -68,6 +71,8 @@ typedef __FlashStringHelper FSH;
 #define GETFARPTR(data) ((uint32_t)(data))
 #define GETHIGHFLASH(data,offset) pgm_read_byte_near(GETFARPTR(data)+(offset))
 #define GETHIGHFLASHW(data,offset) pgm_read_word_near(GETFARPTR(data)+(offset))
+#define COPYHIGHFLASH(target,base,offset,length) \
+  memcpy_P(target,(byte *)base + offset,length)  
 #endif
 
 #else 
@@ -87,10 +92,13 @@ typedef char FSH;
 #define GETFLASH(addr) (*(const byte *)(addr))
 #define GETHIGHFLASH(data,offset)  (*(const byte *)(GETFARPTR(data)+offset))
 #define GETHIGHFLASHW(data,offset) (*(const uint16_t *)(GETFARPTR(data)+offset))
+#define COPYHIGHFLASH(target,base,offset,length) \
+  memcpy(target,(byte *)&base + offset,length)  
 #define STRCPY_P strcpy
 #define STRCMP_P strcmp
 #define STRNCPY_P strncpy
 #define STRNCMP_P strncmp
 #define STRLEN_P strlen
+#define STRCHR_P strchr
 #endif
 #endif

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202408080849Z"
+#define GITHUB_SHA "devel-202409221903Z"

I2CManager.cpp

@@ -46,27 +46,37 @@
 
 // Helper function for listing device types
 static const FSH * guessI2CDeviceType(uint8_t address) {
+  if (address == 0x1A)
+    // 0x09-0x18 selectable, but for now handle the default
+    return F("Piicodev 865/915MHz Transceiver");
+  if (address == 0x1C)
+    return F("QMC6310 Magnetometer");
   if (address >= 0x20 && address <= 0x26)
     return F("GPIO Expander");
-  else if (address == 0x27)
+  if (address == 0x27)
     return F("GPIO Expander or LCD Display");
-  else if (address == 0x29)
+  if (address == 0x29)
     return F("Time-of-flight sensor");
-  else if (address >= 0x3c && address <= 0x3d)
+  if (address == 0x34)
-    return F("OLED Display");
+    return F("TCA8418 keypad scanner");
-  else if (address >= 0x48 && address <= 0x57) // SC16IS752x UART detection
+  if (address >= 0x3c && address <= 0x3d)
+    // 0x3c can also be an HMC883L magnetometer
+    return F("OLED Display or HMC583L Magnetometer");
+  if (address >= 0x48 && address <= 0x57) // SC16IS752x UART detection
     return F("SC16IS75x UART");
-  else if (address >= 0x48 && address <= 0x4f)
+  if (address >= 0x48 && address <= 0x4f)
     return F("Analogue Inputs or PWM");
-  else if (address >= 0x40 && address <= 0x4f)
+  if (address >= 0x40 && address <= 0x4f)
     return F("PWM");
-  else if (address >= 0x50 && address <= 0x5f) 
+  if (address >= 0x50 && address <= 0x5f) 
     return F("EEPROM"); 
-  else if (address == 0x68) 
+  if (address >= 0x60 && address <= 0x68) 
+    return F("Adafruit NeoPixel Driver"); 
+  if (address == 0x68) 
     return F("Real-time clock"); 
-  else if (address >= 0x70 && address <= 0x77)
+  if (address >= 0x70 && address <= 0x77)
     return F("I2C Mux");
-  else
+  // Unknown type
     return F("?");
 }
 

IODevice.cpp

@@ -251,6 +251,26 @@ void IODevice::write(VPIN vpin, int value) {
 #endif
 }
 
+// Write value to count virtual pin(s).
+// these may be within one driver or separated over several drivers 
+void IODevice::writeRange(VPIN vpin, int value, int count) {  
+  
+  while(count) {  
+    auto dev = findDevice(vpin);
+    if (dev) {
+      auto vpinBefore=vpin; 
+      // write to driver, driver will return next vpin it cant handle
+      vpin=dev->_writeRange(vpin, value,count);
+      count-= vpin-vpinBefore;  // decrement by number of vpins changed
+    }
+    else {
+      // skip a vpin if no device handler
+      vpin++;
+      count--;
+    }
+  }
+}
+
 // Write analogue value to virtual pin(s).  If multiple devices are allocated
 // the same pin then only the first one found will be used.
 //
@@ -270,6 +290,24 @@ void IODevice::writeAnalogue(VPIN vpin, int value, uint8_t param1, uint16_t para
 #endif
 }
 
+//
+void IODevice::writeAnalogueRange(VPIN vpin, int value, uint8_t param1, uint16_t param2,int count) {
+  while(count) {  
+    auto dev = findDevice(vpin);
+    if (dev) {
+      auto vpinBefore=vpin; 
+      // write to driver, driver will return next vpin it cant handle
+      vpin=dev->_writeAnalogueRange(vpin, value, param1, param2,count);
+      count-= vpin-vpinBefore;  // decrement by number of vpins changed
+    }
+    else {
+      // skip a vpin if no device handler
+      vpin++;
+      count--;
+    }
+  }
+}
+
 // isBusy, when called for a device pin is always a digital output or analogue output,
 //  returns input feedback state of the pin, i.e. whether the pin is busy performing
 //  an animation or fade over a period of time.

IODevice.h

@@ -128,9 +128,11 @@ public:
 
   // write invokes the IODevice instance's _write method.
   static void write(VPIN vpin, int value);
+  static void writeRange(VPIN vpin, int value,int count);
 
   // write invokes the IODevice instance's _writeAnalogue method (not applicable for digital outputs)
   static void writeAnalogue(VPIN vpin, int value, uint8_t profile=0, uint16_t duration=0);
+  static void writeAnalogueRange(VPIN vpin, int value, uint8_t profile, uint16_t duration, int count);
 
   // isBusy returns true if the device is currently in an animation of some sort, e.g. is changing
   //  the output over a period of time.
@@ -178,11 +180,29 @@ public:
     (void)vpin; (void)value;
   };
  
+ // Method to write new state (optionally implemented within device class)
+ // This will, by default just write to one vpin and return whet to do next.
+ // the real power comes where a single driver can update many vpins in one call.
+  virtual VPIN _writeRange(VPIN vpin, int value, int count) {
+    (void)count;
+    _write(vpin,value); 
+    return vpin+1; // try next vpin 
+  };
+
   // Method to write an 'analogue' value (optionally implemented within device class)
   virtual void _writeAnalogue(VPIN vpin, int value, uint8_t param1=0, uint16_t param2=0) {
     (void)vpin; (void)value; (void) param1; (void)param2;
   };
   
+  // Method to write an 'analogue' value to a VPIN range (optionally implemented within device class)
+  // This will, by default just write to one vpin and return whet to do next.
+  // the real power comes where a single driver can update many vpins in one call.
+  virtual VPIN _writeAnalogueRange(VPIN vpin, int value, uint8_t param1, uint16_t param2, int count) {
+    (void) count;
+    _writeAnalogue(vpin, value,  param1, param2);
+    return vpin+1; 
+  };
+
   // Method to read digital pin state (optionally implemented within device class)
   virtual int _read(VPIN vpin) { 
     (void)vpin; 
@@ -548,5 +568,8 @@ protected:
 #include "IO_EXIOExpander.h"
 #include "IO_trainbrains.h"
 #include "IO_EncoderThrottle.h"
+#include "IO_TCA8418.h"
+#include "IO_NeoPixel.h"
+
 
 #endif // iodevice_h

IO_NeoPixel.h

@@ -0,0 +1,333 @@
+/*
+ *  © 2024, Chris Harlow. All rights reserved.
+ *
+ *  This file is part of EX-CommandStation
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+/*
+* The IO_NEOPIXEL.h device driver integrates with one or more Adafruit neopixel drivers.
+* This device driver will configure the device on startup, along with
+* interacting with the device for all input/output duties.
+*
+* To create NEOPIXEL devices, these are defined in myAutomation.h:
+* (Note the device driver is included by default)
+*
+* HAL(NEOPIXEL,first vpin, number of pixels,mode, i2c address) 
+* e.g. HAL(NEOPIXEL,1000,64,NEO_RGB,0x60)
+* This gives each pixel in the chain an individual vpin
+* The number of pixels must match the physical pixels in the chain. 
+* 
+* This driver maintains a colour (rgb value in 5,5,5 bits only) plus an ON bit.
+* This can be written/read with an analog write/read call. 
+* The ON bit can be set on and off with a digital write. This allows for 
+* a pixel to be preset a colour and then turned on and off like any other light. 
+*/
+
+#ifndef IO_EX_NeoPixel_H
+#define IO_EX_NeoPixel_H
+
+#include "IODevice.h"
+#include "I2CManager.h"
+#include "DIAG.h"
+#include "FSH.h"
+
+
+// The following macros to define the Neopixel String type
+// have been copied from the Adafruit Seesaw Library under the 
+// terms of the GPL. 
+// Credit to: https://github.com/adafruit/Adafruit_Seesaw
+
+// The order of primary colors in the NeoPixel data stream can vary
+// among device types, manufacturers and even different revisions of
+// the same item.  The third parameter to the seesaw_NeoPixel
+// constructor encodes the per-pixel byte offsets of the red, green
+// and blue primaries (plus white, if present) in the data stream --
+// the following #defines provide an easier-to-use named version for
+// each permutation.  e.g. NEO_GRB indicates a NeoPixel-compatible
+// device expecting three bytes per pixel, with the first byte
+// containing the green value, second containing red and third
+// containing blue.  The in-memory representation of a chain of
+// NeoPixels is the same as the data-stream order; no re-ordering of
+// bytes is required when issuing data to the chain.
+
+// Bits 5,4 of this value are the offset (0-3) from the first byte of
+// a pixel to the location of the red color byte.  Bits 3,2 are the
+// green offset and 1,0 are the blue offset.  If it is an RGBW-type
+// device (supporting a white primary in addition to R,G,B), bits 7,6
+// are the offset to the white byte...otherwise, bits 7,6 are set to
+// the same value as 5,4 (red) to indicate an RGB (not RGBW) device.
+// i.e. binary representation:
+// 0bWWRRGGBB for RGBW devices
+// 0bRRRRGGBB for RGB
+
+// RGB NeoPixel permutations; white and red offsets are always same
+// Offset:         W          R          G          B
+#define NEO_RGB ((0 << 6) | (0 << 4) | (1 << 2) | (2))
+#define NEO_RBG ((0 << 6) | (0 << 4) | (2 << 2) | (1))
+#define NEO_GRB ((1 << 6) | (1 << 4) | (0 << 2) | (2))
+#define NEO_GBR ((2 << 6) | (2 << 4) | (0 << 2) | (1))
+#define NEO_BRG ((1 << 6) | (1 << 4) | (2 << 2) | (0))
+#define NEO_BGR ((2 << 6) | (2 << 4) | (1 << 2) | (0))
+
+// RGBW NeoPixel permutations; all 4 offsets are distinct
+// Offset:         W          R          G          B
+#define NEO_WRGB ((0 << 6) | (1 << 4) | (2 << 2) | (3))
+#define NEO_WRBG ((0 << 6) | (1 << 4) | (3 << 2) | (2))
+#define NEO_WGRB ((0 << 6) | (2 << 4) | (1 << 2) | (3))
+#define NEO_WGBR ((0 << 6) | (3 << 4) | (1 << 2) | (2))
+#define NEO_WBRG ((0 << 6) | (2 << 4) | (3 << 2) | (1))
+#define NEO_WBGR ((0 << 6) | (3 << 4) | (2 << 2) | (1))
+
+#define NEO_RWGB ((1 << 6) | (0 << 4) | (2 << 2) | (3))
+#define NEO_RWBG ((1 << 6) | (0 << 4) | (3 << 2) | (2))
+#define NEO_RGWB ((2 << 6) | (0 << 4) | (1 << 2) | (3))
+#define NEO_RGBW ((3 << 6) | (0 << 4) | (1 << 2) | (2))
+#define NEO_RBWG ((2 << 6) | (0 << 4) | (3 << 2) | (1))
+#define NEO_RBGW ((3 << 6) | (0 << 4) | (2 << 2) | (1))
+
+#define NEO_GWRB ((1 << 6) | (2 << 4) | (0 << 2) | (3))
+#define NEO_GWBR ((1 << 6) | (3 << 4) | (0 << 2) | (2))
+#define NEO_GRWB ((2 << 6) | (1 << 4) | (0 << 2) | (3))
+#define NEO_GRBW ((3 << 6) | (1 << 4) | (0 << 2) | (2))
+#define NEO_GBWR ((2 << 6) | (3 << 4) | (0 << 2) | (1))
+#define NEO_GBRW ((3 << 6) | (2 << 4) | (0 << 2) | (1))
+
+#define NEO_BWRG ((1 << 6) | (2 << 4) | (3 << 2) | (0))
+#define NEO_BWGR ((1 << 6) | (3 << 4) | (2 << 2) | (0))
+#define NEO_BRWG ((2 << 6) | (1 << 4) | (3 << 2) | (0))
+#define NEO_BRGW ((3 << 6) | (1 << 4) | (2 << 2) | (0))
+#define NEO_BGWR ((2 << 6) | (3 << 4) | (1 << 2) | (0))
+#define NEO_BGRW ((3 << 6) | (2 << 4) | (1 << 2) | (0))
+
+// If 400 KHz support is enabled, the third parameter to the constructor
+// requires a 16-bit value (in order to select 400 vs 800 KHz speed).
+// If only 800 KHz is enabled (as is default on ATtiny), an 8-bit value
+// is sufficient to encode pixel color order, saving some space.
+
+#define NEO_KHZ800 0x0000 // 800 KHz datastream
+#define NEO_KHZ400 0x0100 // 400 KHz datastream
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+/*
+ * IODevice subclass for NeoPixel.
+ */
+
+class NeoPixel : public IODevice {
+public:
+  
+  static void create(VPIN vpin, int nPins, uint16_t mode=(NEO_GRB | NEO_KHZ800), I2CAddress i2cAddress=0x60) {
+    if (checkNoOverlap(vpin, nPins, mode, i2cAddress)) new NeoPixel(vpin, nPins, mode, i2cAddress);
+  }
+
+private:
+  
+  static const byte SEESAW_NEOPIXEL_BASE=0x0E;
+  static const byte SEESAW_NEOPIXEL_STATUS = 0x00;
+  static const byte SEESAW_NEOPIXEL_PIN = 0x01;
+  static const byte SEESAW_NEOPIXEL_SPEED = 0x02;
+  static const byte SEESAW_NEOPIXEL_BUF_LENGTH = 0x03;
+  static const byte SEESAW_NEOPIXEL_BUF=0x04;
+  static const byte SEESAW_NEOPIXEL_SHOW=0x05;
+
+  // all adafruit examples say this pin. Presumably its hard wired 
+  // in the adapter anyway. 
+  static const byte SEESAW_PIN15 = 15;
+  
+  // Constructor
+  NeoPixel(VPIN firstVpin, int nPins, uint16_t mode, I2CAddress i2cAddress) {
+    _firstVpin = firstVpin;
+    _nPins=nPins;
+    _I2CAddress = i2cAddress;
+    
+    // calculate the offsets into the seesaw buffer for each colour depending
+    // on the pixel strip type passed in mode.
+
+    _redOffset=4+(mode >> 4 & 0x03);
+    _greenOffset=4+(mode >> 2 & 0x03); 
+    _blueOffset=4+(mode & 0x03); 
+    if (4+(mode >>6 & 0x03) == _redOffset) _bytesPerPixel=3; 
+    else _bytesPerPixel=4; // string has a white byte.
+    
+    _kHz800=(mode & NEO_KHZ400)==0;
+    _showPendimg=false;
+    
+    // Each pixel requires 3 bytes RGB memory.
+    // Although the driver device can remember this, it cant do off/on without
+    // forgetting what the on colour was!
+    pixelBuffer=(RGB *) malloc(_nPins*sizeof(RGB)); 
+    stateBuffer=(byte *) calloc((_nPins+7)/8,sizeof(byte)); // all pixels off  
+    if (pixelBuffer==nullptr || stateBuffer==nullptr) {
+      DIAG(F("NeoPixel I2C:%s not enough RAM"), _I2CAddress.toString());
+      return;
+    }
+    // preset all pins to white so a digital on/off will do something even if no colour set.
+    memset(pixelBuffer,0xFF,_nPins*sizeof(RGB));
+    addDevice(this);
+  }
+
+  void _begin() {
+    
+    // Initialise Neopixel device
+    I2CManager.begin();
+    if (!I2CManager.exists(_I2CAddress)) {
+      DIAG(F("NeoPixel I2C:%s device not found"), _I2CAddress.toString());
+      _deviceState = DEVSTATE_FAILED;
+      return;
+    }
+    
+    byte speedBuffer[]={SEESAW_NEOPIXEL_BASE, SEESAW_NEOPIXEL_SPEED,_kHz800};
+    I2CManager.write(_I2CAddress, speedBuffer, sizeof(speedBuffer));
+    
+    // In the driver there are 3 of 4 byts per pixel
+    auto numBytes=_bytesPerPixel * _nPins; 
+    byte setbuffer[] = {SEESAW_NEOPIXEL_BASE, SEESAW_NEOPIXEL_BUF_LENGTH,
+                  (byte)(numBytes >> 8), (byte)(numBytes & 0xFF)};
+    I2CManager.write(_I2CAddress, setbuffer, sizeof(setbuffer));
+    
+    const byte pinbuffer[] = {SEESAW_NEOPIXEL_BASE, SEESAW_NEOPIXEL_PIN,SEESAW_PIN15};
+    I2CManager.write(_I2CAddress, pinbuffer, sizeof(pinbuffer));
+    
+    for (auto pin=0;pin<_nPins;pin++) transmit(pin);
+     _display();
+  }
+  
+ // loop called by HAL supervisor 
+  void _loop(unsigned long currentMicros) override {
+    if (!_showPendimg) return;
+    byte showBuffer[]={SEESAW_NEOPIXEL_BASE,SEESAW_NEOPIXEL_SHOW};
+    I2CManager.write(_I2CAddress,showBuffer,sizeof(showBuffer));
+    _showPendimg=false;
+  }  
+  
+  
+  // read back pixel on/off
+  int _read(VPIN vpin) override {
+    if (_deviceState == DEVSTATE_FAILED) return 0;
+    return isPixelOn(vpin-_firstVpin);
+  }
+
+  // Write digital value. Sets pixel on or off
+  void _write(VPIN vpin, int value) override {
+    if (_deviceState == DEVSTATE_FAILED) return;
+    auto pixel=vpin-_firstVpin;
+    if (value) {
+      if (isPixelOn(pixel)) return;
+      setPixelOn(pixel);
+    }
+    else { // set off
+      if (!isPixelOn(pixel)) return;
+      setPixelOff(pixel);
+     }
+     transmit(pixel);
+  }
+   
+  VPIN _writeRange(VPIN vpin,int value, int count) {
+    // using write range cuts out the constant vpin to driver lookup so
+    // we can update multiple pixels much faster.
+    VPIN nextVpin=vpin +  (count>_nPins ? _nPins : count);
+    if (_deviceState != DEVSTATE_FAILED) while(vpin<nextVpin) {
+      _write(vpin,value);
+      vpin++;
+    }
+    return nextVpin;  // next pin we cant 
+  }  
+  // Write analogue value.
+  // The convoluted parameter mashing here is to allow passing the RGB and on/off
+  // information through the generic HAL _writeAnalog interface which was originally
+  // designed for servos and short integers  
+  void _writeAnalogue(VPIN vpin, int colour_RG, uint8_t onoff, uint16_t colour_B) override {
+    if (_deviceState == DEVSTATE_FAILED) return;
+    RGB newColour={(byte)((colour_RG>>8) & 0xFF), (byte)(colour_RG & 0xFF), (byte)(colour_B & 0xFF)};
+    auto pixel=vpin-_firstVpin;
+    if (pixelBuffer[pixel]==newColour && isPixelOn(pixel)==(bool)onoff) return; // no change  
+      
+    if (onoff) setPixelOn(pixel); else setPixelOff(pixel);
+    pixelBuffer[pixel]=newColour;
+    transmit(pixel);
+  }
+ VPIN _writeAnalogueRange(VPIN vpin, int colour_RG, uint8_t onoff, uint16_t colour_B, int count) override {
+    // using write range cuts out the constant vpin to driver lookup so
+    VPIN nextVpin=vpin +  (count>_nPins ? _nPins : count); 
+    if (_deviceState != DEVSTATE_FAILED) while(vpin<nextVpin) {
+      _writeAnalogue(vpin,colour_RG, onoff,colour_B);
+      vpin++;
+    }
+    return nextVpin;  // next pin we cant 
+ }
+ 
+  // Display device information and status.
+  void _display() override {
+    DIAG(F("NeoPixel I2C:%s Vpins %u-%u %S"),
+              _I2CAddress.toString(), 
+              (int)_firstVpin, (int)_firstVpin+_nPins-1,
+              _deviceState == DEVSTATE_FAILED ? F("OFFLINE") : F(""));
+  }
+
+
+  
+  bool isPixelOn(int16_t pixel) {return stateBuffer[pixel/8] & (0x80>>(pixel%8));}
+  void setPixelOn(int16_t pixel) {stateBuffer[pixel/8] |= (0x80>>(pixel%8));}
+  void setPixelOff(int16_t pixel) {stateBuffer[pixel/8] &= ~(0x80>>(pixel%8));}
+  
+  // Helper function for error handling
+  void reportError(uint8_t status, bool fail=true) {
+    DIAG(F("NeoPixel I2C:%s Error:%d (%S)"), _I2CAddress.toString(), 
+      status, I2CManager.getErrorMessage(status));
+    if (fail)
+    _deviceState = DEVSTATE_FAILED;
+  }
+
+  
+  void transmit(uint16_t pixel, bool show=true) { 
+    byte buffer[]={SEESAW_NEOPIXEL_BASE,SEESAW_NEOPIXEL_BUF,0x00,0x00,0x00,0x00,0x00};
+    uint16_t offset= pixel * _bytesPerPixel;
+    buffer[2]=(byte)(offset>>8);
+    buffer[3]=(byte)(offset & 0xFF);
+    
+    if (isPixelOn(pixel)) {
+      auto colour=pixelBuffer[pixel];    
+      buffer[_redOffset]=colour.red;
+      buffer[_greenOffset]=colour.green;
+      buffer[_blueOffset]=colour.blue;
+    } // else leave buffer black (in buffer preset to zeros above)
+    
+    // Transmit pixel to driver
+    I2CManager.write(_I2CAddress,buffer,4 +_bytesPerPixel);
+    _showPendimg=true;
+  
+  }
+  struct RGB { 
+      byte red; 
+      byte green; 
+      byte blue; 
+      bool operator==(const RGB& other) const {
+        return red == other.red && green == other.green && blue == other.blue;
+      }
+    };
+
+  RGB*   pixelBuffer = nullptr;
+  byte*  stateBuffer = nullptr;  // 1 bit per pixel
+  bool _showPendimg;
+  
+  // mapping of RGB onto pixel buffer for seesaw.
+  byte _bytesPerPixel;
+  byte _redOffset;
+  byte _greenOffset;
+  byte _blueOffset;
+  bool _kHz800; 
+};
+
+#endif

IO_TCA8418.h

@@ -0,0 +1,184 @@
+/*
+ *  © 2023, Paul M. Antoine
+ *  © 2021, Neil McKechnie. All rights reserved.
+ *  
+ *  This file is part of DCC-EX API
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#ifndef io_tca8418_h
+#define io_tca8418_h
+
+#include "IO_GPIOBase.h"
+#include "FSH.h"
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+/*
+ * IODevice subclass for TCA8418 80-key keypad encoder, which we'll treat as 64 of the possible
+ * 80 inputs for now, in an 8x8 matrix only, although the datasheet says:
+ * 
+ * The TCA8418 can be configured to support many different configurations of keypad setups.
+ * All 18 GPIOs for the rows and columns can be used to support up to 80 keys in an 8x10 key pad
+ * array. Another option is that all 18 GPIOs be used for GPIs to read 18 buttons which are
+ * not connected in an array. Any combination in between is also acceptable (for example, a
+ * 3x4 keypad matrix and using the remaining 11 GPIOs as a combination of inputs and outputs).
+ */
+ 
+class TCA8418 : public GPIOBase<uint64_t> {
+public:
+  static void create(VPIN vpin, uint8_t nPins, I2CAddress i2cAddress, int interruptPin=-1) {
+    if (checkNoOverlap(vpin, nPins, i2cAddress))
+      // temporarily use the simple 18-pin GPIO mode - we'll switch to 8x8 matrix once this works
+      new TCA8418(vpin, (nPins = (nPins > 18) ? 18 : nPins), i2cAddress, interruptPin);
+  }
+
+private:  
+  // Constructor
+  TCA8418(VPIN vpin, uint8_t nPins, I2CAddress i2cAddress, int interruptPin=-1) 
+    : GPIOBase<uint64_t>((FSH *)F("TCA8418"), vpin, nPins, i2cAddress, interruptPin) 
+  {
+    uint8_t receiveBuffer[1];
+    uint8_t commandBuffer[1];
+    uint8_t status;
+
+    commandBuffer[0] = REG_INT_STAT;  // Check interrupt status
+    status = I2CManager.read(_I2CAddress, receiveBuffer, sizeof(receiveBuffer), commandBuffer, sizeof(commandBuffer));
+    if (status == I2C_STATUS_OK) {
+      DIAG(F("TCA8418 Interrupt status was: %x"), receiveBuffer[0]);
+    }
+    else
+      DIAG(F("TCA8418 Interrupt status failed to read!"));
+    // requestBlock.setRequestParams(_I2CAddress, inputBuffer, sizeof(inputBuffer),
+    //   outputBuffer, sizeof(outputBuffer));
+    // outputBuffer[0] = REG_GPIOA;
+  }
+  void _writeGpioPort() override {
+    // I2CManager.write(_I2CAddress, 3, REG_GPIOA, _portOutputState, _portOutputState>>8);
+  }
+  void _writePullups() override {
+    // Set pullups only for in-use pins.  This prevents pullup being set for a pin that
+    //  is intended for use as an output but hasn't been written to yet.
+    uint32_t temp = _portPullup & _portInUse;
+    (void)temp; // Chris did this so he could see warnings that mattered
+    // I2CManager.write(_I2CAddress, 3, REG_GPPUA, temp, temp>>8);  
+  }
+  void _writePortModes() override {
+    // Write 0 to each GPIO_DIRn for in-use pins that are inputs, 1 for outputs
+    uint64_t temp = _portMode & _portInUse;
+    DIAG(F("TCA8418 writing Port Mode: %x, to GPIO_DIRs"), temp);
+    DIAG(F("TCA8418 writing Port Mode: %x, to GPIO_DIR1"), (temp&0xFF));
+    I2CManager.write(_I2CAddress, 2, REG_GPIO_DIR1, (temp&0xFF));
+    DIAG(F("TCA8418 writing Port Mode: %x, to GPIO_DIR2"), ((temp&0xFF00)>>8));
+    I2CManager.write(_I2CAddress, 2, REG_GPIO_DIR2, ((temp&0xFF00)>>8));
+    DIAG(F("TCA8418 writing Port Mode: %x, to GPIO_DIR3"), (temp&0x30000)>>16);
+    I2CManager.write(_I2CAddress, 2, REG_GPIO_DIR3, ((temp&0x30000)>>16));
+
+    // Enable interrupt for in-use pins which are inputs (_portMode=0)
+    // TCA8418 has interrupt enables per pin, but must be configured for low->high
+    // or high->low... unlike the MCP23017
+    temp = ~_portMode & _portInUse;
+    DIAG(F("TCA8418 writing interrupt Port Mode: %x, to GPIO_INT_ENs"), temp);
+    DIAG(F("TCA8418 writing interrupt Port Mode: %x, to GPIO_INT_EN1"), (temp&0xFF));
+    I2CManager.write(_I2CAddress, 2, REG_GPIO_INT_EN1, (temp&0xFF));
+    DIAG(F("TCA8418 writing interrupt Port Mode: %x, to GPIO_INT_EN2"), ((temp&0xFF00)>>8));
+    I2CManager.write(_I2CAddress, 2, REG_GPIO_INT_EN2, ((temp&0xFF00)>>8));
+    DIAG(F("TCA8418 writing interrupt Port Mode: %x, to GPIO_INT_EN3"), (temp&0x30000)>>16);
+    I2CManager.write(_I2CAddress, 2, REG_GPIO_INT_EN3, ((temp&0x30000)>>16));
+    // I2CManager.write(_I2CAddress, 3, REG_INTCONA, 0x00, 0x00);
+    // I2CManager.write(_I2CAddress, 3, REG_GPINTENA, temp, temp>>8);
+  }
+  void _readGpioPort(bool immediate) override {
+    // if (immediate) {
+    //   uint8_t buffer[2];
+    //   I2CManager.read(_I2CAddress, buffer, 2, 1, REG_GPIOA);
+    //   _portInputState = ((uint16_t)buffer[1]<<8) | buffer[0] | _portMode;
+    // } else {
+    //   // Queue new request
+    //   requestBlock.wait(); // Wait for preceding operation to complete
+    //   // Issue new request to read GPIO register
+    //   I2CManager.queueRequest(&requestBlock);
+    // }
+  }
+  // This function is invoked when an I/O operation on the requestBlock completes.
+  void _processCompletion(uint8_t status) override {
+    // if (status == I2C_STATUS_OK) 
+    //   _portInputState = (((uint16_t)inputBuffer[1]<<8) | inputBuffer[0]) | _portMode;
+    // else  
+    //   _portInputState = 0xffff;
+  }
+
+  void _setupDevice() override {
+    DIAG(F("TCA8418 setupDevice() called"));
+    // IOCON is set MIRROR=1, ODR=1 (open drain shared interrupt pin)
+    // I2CManager.write(_I2CAddress, 2, REG_IOCON, 0x44);
+    _writePortModes();
+    _writePullups();
+    _writeGpioPort();
+  }
+ 
+  enum
+  {
+    REG_FIRST_RESERVED = 0x00,
+    REG_CFG = 0x01,
+    REG_INT_STAT = 0x02,
+    REG_KEY_LCK_EC = 0x03,
+    REG_KEY_EVENT_A = 0x04,
+    REG_KEY_EVENT_B = 0x05,
+    REG_KEY_EVENT_C = 0x06,
+    REG_KEY_EVENT_D = 0x07,
+    REG_KEY_EVENT_E = 0x08,
+    REG_KEY_EVENT_F = 0x09,
+    REG_KEY_EVENT_G = 0x0A,
+    REG_KEY_EVENT_H = 0x0B,
+    REG_KEY_EVENT_I = 0x0C,
+    REG_KEY_EVENT_J = 0x0D,
+    REG_KP_LCK_TIMER = 0x0E,
+    REG_UNLOCK1 = 0x0F,
+    REG_UNLOCK2 = 0x10,
+    REG_GPIO_INT_STAT1 = 0x11,
+    REG_GPIO_INT_STAT2 = 0x12,
+    REG_GPIO_INT_STAT3 = 0x13,
+    REG_GPIO_DAT_STAT1 = 0x14,
+    REG_GPIO_DAT_STAT2 = 0x15,
+    REG_GPIO_DAT_STAT3 = 0x16,
+    REG_GPIO_DAT_OUT1 = 0x17,
+    REG_GPIO_DAT_OUT2 = 0x18,
+    REG_GPIO_DAT_OUT3 = 0x19,
+    REG_GPIO_INT_EN1 = 0x1A,
+    REG_GPIO_INT_EN2 = 0x1B,
+    REG_GPIO_INT_EN3 = 0x1C,
+    REG_KP_GPIO1 = 0x1D,
+    REG_KP_GPIO2 = 0x1E,
+    REG_KP_GPIO3 = 0x1F,
+    REG_GPI_EM1 = 0x20,
+    REG_GPI_EM2 = 0x21,
+    REG_GPI_EM3 = 0x22,
+    REG_GPIO_DIR1 = 0x23,
+    REG_GPIO_DIR2 = 0x24,
+    REG_GPIO_DIR3 = 0x25,
+    REG_GPIO_INT_LVL1 = 0x26,
+    REG_GPIO_INT_LVL2 = 0x27,
+    REG_GPIO_INT_LVL3 = 0x28,
+    REG_DEBOUNCE_DIS1 = 0x29,
+    REG_DEBOUNCE_DIS2 = 0x2A,
+    REG_DEBOUNCE_DIS3 = 0x2B,
+    REG_GPIO_PULL1 = 0x2C,
+    REG_GPIO_PULL2 = 0x2D,
+    REG_GPIO_PULL3 = 0x2E,
+    REG_LAST_RESERVED = 0x2F,
+  };
+};
+
+#endif

Release_Notes/NeoPixel.md

@@ -0,0 +1,77 @@
+NeoPixel support
+
+The IO_NeoPixel.h driver supports the adafruit neopixel seesaw board. It turns each pixel into an individual VPIN which can be given a colour and turned on or off using the new <o> command or the NEOPIXEL Exrail macro. Exrail SIGNALS can also drive a single pixel signal or multiple separate pixels.
+
+
+1.  Defining the hardware driver:
+    Add a driver definition in myAutomation.h for each adafruit I2C driver.
+
+    HAL(neoPixel, firstVpin, numberOfPixels [, mode [, i2caddress])
+      Where mode is selected from the various pixel string types which have varying
+      colour order or refresh frequency. For MOST strings this mode will be NEO_GRB but for others refer to the comments in IO_NeoPixel.h
+      If omitted the node and i2caddress default to NEO_GRB, 0x60.
+
+    HAL(NeoPixel,1000,20)
+       This is a NeoPixel driver defaulting to I2C aqddress 0x60 for a GRB pixel string. Pixels are given vpin numbers from 1000 to 1019. 
+    HAL(NeoPixel,1020,20,NEO_GRB,0x61)
+       This is a NeoPixel driver on i2c address 0x61    
+
+2. Setting pixels from the < > commands.
+    By default, each pixel in the string is created as white but switched off.
+    Each pixel has a vpin starting from the first vpin in the HAL definitions.
+
+    <o vpin>   switches pixel on  (same as <z vpin>) e.g. <o 1005>
+    <o -vpin> switches pixel off (same as <z -vpin>) e.g. <o -1003>
+    (the z commands work on pixels the same as other gpio pins.)
+
+    <o [-]vpin count> switches on/off count pixels starting at vpin. e.g <o 1000 5>
+    Note: it IS acceptable to switch across 2 strings of pixels if they are contiguous vpin ranges.  It is also interesting that this command doesnt care if the vpins are NeoPixel or any other type, so it can be used to switch a range of other pin types. 
+
+    <o [-]vpin red green blue [count]> sets the colour and on/off status of a pin or pins. Each colour is 0..255 e.g. <o 1005 255 255 0>  sets pin 1005 to bright yellow and ON, <0 -1006 0 0 255 10>  sets pins 1006 to 1015 (10 pins) to bright blue but OFF.     
+    Note: If you set a pin to a colour, you can turn it on and off without having to reset the colour every time. This is something the adafruit seesaw library can't do and is just one of several reasons why we dont use it.  
+
+3. Setting pixels from EXRAIL
+    The new NEOPIXEL macro provides the same functionality as the    <o [-]vpin red green blue [count]> command above. 
+    NEOPIXEL([-]vpin, red, green, blue [,count])
+    
+    Setting pixels on or off (without colour change) can be done with SET/RESET [currently there is no set range facility but that may be added as a general exrail thing... watch this space]
+
+    Because the pixels obey set/reset, the BLINK command can also be used to control blinking a pixel.
+
+4. EXRAIL pixel signals.
+    There are two types possible, a mast with separate fixed colour pixels for each aspect, or a mast with one multiple colour pixel for all aspects.
+
+    For separate pixels, the colours should be established at startup and a normal SIGNALH macro used.
+    
+  AUTOSTART 
+    SIGNALH(1010,1011,1012)
+    NEOPIXEL(1010,255,0,0)       
+    NEOPIXEL(1011,128,128,0)
+    NEOPIXEL(1012,0,255,0)
+    RED(1010)  // force signal state otherwise all 3 lights will be on
+    DONE 
+
+    For signals with 1 pixel, the NEOPIXEL_SIGNAL macro will create a signal 
+    NEOPIXEL_SIGNAL(vpin,redfx,amberfx,greenfx)
+
+    ** Changed... ****
+    The fx values above can be created by the NeoRGB macro so a bright red would be NeoRGB(255,0,0)  bright green NeoRGB(0,255,0) and amber something like NeoRGB(255,100,0)
+    NeoRGB creates a single int32_t value so it can be used in several ways as convenient.
+
+// create 1-lamp signal with NeoRGB colours
+NEOPIXEL_SIGNAL(1000,NeoRGB(255,0,0),NeoRGB(255,100,0),NeoRGB(0,255,0))
+
+// Create 1-lamp signal with named colours.
+// This is better if you have multiple signals.
+// (Note: ALIAS is not suitable due to word length defaults) 
+#define REDLAMP NeoRGB(255,0,0)
+#define AMBERLAMP NeoRGB(255,100,0)
+#define GREENLAMP NeoRGB(0,255,0)
+NEOPIXEL_SIGNAL(1001,REDLAMP,AMBERLAMP,GREENLAMP)
+
+// Create 1-lamp signal with web type RGB colours 
+// (Using blue for the amber  signal , just testing) 
+NEOPIXEL_SIGNAL(1002,0xFF0000,0x0000FF,0x00FF00)
+
+      
+  

SerialManager.cpp

@@ -1,7 +1,7 @@
  /*
  *  © 2022 Paul M. Antoine
  *  © 2021 Chris Harlow
- *  © 2022 Harald Barth
+ *  © 2022 2024 Harald Barth
  *  All rights reserved.
  *  
  *  This file is part of DCC++EX
@@ -23,6 +23,7 @@
 #include "SerialManager.h"
 #include "DCCEXParser.h"
 #include "StringFormatter.h"
+#include "DIAG.h"
 
 #ifdef ARDUINO_ARCH_ESP32
 #ifdef SERIAL_BT_COMMANDS
@@ -36,6 +37,10 @@ BluetoothSerial SerialBT;
 #endif //COMMANDS
 #endif //ESP32
 
+static const byte PAYLOAD_FALSE = 0;
+static const byte PAYLOAD_NORMAL = 1;
+static const byte PAYLOAD_STRING = 2;
+
 SerialManager * SerialManager::first=NULL;
 
 SerialManager::SerialManager(Stream * myserial) {
@@ -43,7 +48,7 @@ SerialManager::SerialManager(Stream * myserial) {
   next=first;
   first=this;
   bufferLength=0;
-  inCommandPayload=false; 
+  inCommandPayload=PAYLOAD_FALSE; 
 } 
 
 void SerialManager::init() {
@@ -68,7 +73,11 @@ void SerialManager::init() {
   new SerialManager(&Serial3);
 #endif
 #ifdef SERIAL2_COMMANDS
+#ifdef ARDUINO_ARCH_ESP32
+  Serial2.begin(115200, SERIAL_8N1, 16, 17); // GPIO 16 RXD2; GPIO 17 TXD2 on ESP32
+#else  // not ESP32
   Serial2.begin(115200);
+#endif // ESP32
   new SerialManager(&Serial2);
 #endif
 #ifdef SERIAL1_COMMANDS
@@ -88,7 +97,11 @@ void SerialManager::init() {
   }
 #endif
 #ifdef SABERTOOTH
+#ifdef ARDUINO_ARCH_ESP32
   Serial2.begin(9600, SERIAL_8N1, 16, 17); // GPIO 16 RXD2; GPIO 17 TXD2 on ESP32
+#else
+  Serial2.begin(9600);
+#endif
 #endif
 }
 
@@ -106,21 +119,37 @@ void SerialManager::loop() {
 void SerialManager::loop2() {
   while (serial->available()) {
     char ch = serial->read();
+    if (!inCommandPayload) {
       if (ch == '<') {
-            inCommandPayload = true;
+        inCommandPayload = PAYLOAD_NORMAL;
         bufferLength = 0;
         buffer[0] = '\0';
       }
-        else if  (inCommandPayload) {
+    } else { // if (inCommandPayload)
       if (bufferLength <  (COMMAND_BUFFER_SIZE-1))
         buffer[bufferLength++] = ch;
+      if (inCommandPayload > PAYLOAD_NORMAL) {
+        if (inCommandPayload > 32 + 2) {    // String way too long
+          ch = '>';                         // we end this nonsense
+          inCommandPayload = PAYLOAD_NORMAL;
+          DIAG(F("Parse error: Unbalanced string"));
+          // fall through to ending parsing below
+        } else if (ch == '"') {               // String end
+          inCommandPayload = PAYLOAD_NORMAL;
+          continue; // do not fall through
+        } else
+          inCommandPayload++;
+      }
+      if (inCommandPayload == PAYLOAD_NORMAL) {
         if (ch == '>') {
           buffer[bufferLength] = '\0';
           DCCEXParser::parse(serial, buffer, NULL); 
-	    inCommandPayload = false;
+          inCommandPayload = PAYLOAD_FALSE;
           break;
+        } else if (ch == '"') {
+          inCommandPayload = PAYLOAD_STRING;
+        }
       }
     }
   }
-    
 }

SerialManager.h

@@ -44,6 +44,6 @@ private:
   SerialManager * next;
   byte bufferLength;
   byte buffer[COMMAND_BUFFER_SIZE]; 
-  bool inCommandPayload;
+  byte inCommandPayload;
 };
 #endif

WiThrottle.cpp

@@ -322,6 +322,15 @@ void WiThrottle::locoAction(RingStream * stream, byte* aval, char throttleChar,
       }
       break;  
     }
+  case 'f': // Function key set, force function variant
+    {
+      bool pressed=aval[1]=='1';
+      int fKey = getInt(aval+2);
+      LOOPLOCOS(throttleChar, cab) {
+	DCC::setFn(myLocos[loco].cab,fKey, pressed);
+      }
+      break;
+    }
   case 'q':
     if (aval[1]=='V' || aval[1]=='R' ) {   //qV or qR
       // just flag the loco for broadcast and it will happen.

WifiESP32.cpp

@@ -23,13 +23,13 @@
 #include <vector>
 #include "defines.h"
 #include "ESPmDNS.h"
-#include <WiFi.h>
 #include "esp_wifi.h"
 #include "WifiESP32.h"
 #include "DIAG.h"
 #include "RingStream.h"
 #include "CommandDistributor.h"
 #include "WiThrottle.h"
+#include "DCC.h"
 /*
 #include "soc/rtc_wdt.h"
 #include "esp_task_wdt.h"
@@ -109,10 +109,13 @@ private:
   bool inUse;
 };
 
+// file scope variables
 static std::vector<NetworkClient> clients; // a list to hold all clients
-static WiFiServer *server = NULL;
 static RingStream *outboundRing = new RingStream(10240);
 static bool APmode = false;
+// init of static class scope variables
+bool WifiESP::wifiUp = false;
+WiFiServer *WifiESP::server = NULL;
 
 #ifdef WIFI_TASK_ON_CORE0
 void wifiLoop(void *){
@@ -128,6 +131,30 @@ char asciitolower(char in) {
   return in;
 }
 
+void WifiESP::teardown() {
+  // stop all locos
+  DCC::setThrottle(0,1,1); // this broadcasts speed 1(estop) and sets all reminders to speed 1.
+  // terminate all clients connections
+  while (!clients.empty()) {
+    // pop_back() should invoke destructor which does stop()
+    // on the underlying TCP connction
+    clients.pop_back();
+  }
+  // stop server
+  if (server != NULL) {
+    server->stop();
+    server->close();
+    server->end();
+    DIAG(F("server stop, close, end"));
+  }
+  // terminate MDNS anouncement
+  mdns_service_remove_all();
+  mdns_free();
+  // stop WiFi
+  WiFi.disconnect(true);
+  wifiUp = false;
+}
+
 bool WifiESP::setup(const char *SSid,
                     const char *password,
                     const char *hostname,
@@ -136,8 +163,10 @@ bool WifiESP::setup(const char *SSid,
                     const bool forceAP) {
   bool havePassword = true;
   bool haveSSID = true;
-  bool wifiUp = false;
+//  bool wifiUp = false;
   uint8_t tries = 40;
+  if (wifiUp)
+    teardown();
 
   //#ifdef SERIAL_BT_COMMANDS
   //return false;
@@ -265,7 +294,7 @@ bool WifiESP::setup(const char *SSid,
   if(!MDNS.begin(hostname)) {
     DIAG(F("Wifi setup failed to start mDNS"));
   }
-  if(!MDNS.addService("withrottle", "tcp", 2560)) {
+  if(!MDNS.addService("withrottle", "tcp", port)) {
     DIAG(F("Wifi setup failed to add withrottle service to mDNS"));
   }
 

WifiESP32.h

@@ -22,6 +22,7 @@
 #ifndef WifiESP32_h
 #define WifiESP32_h
 
+#include <WiFi.h>
 #include "FSH.h"
 
 class WifiESP
@@ -36,6 +37,9 @@ public:
 			const bool forceAP);
   static void loop();
 private:
+  static void teardown();
+  static bool wifiUp;
+  static WiFiServer *server;
 };
 #endif //WifiESP8266_h
 #endif //ESP8266

platformio.ini

@@ -104,10 +104,35 @@ lib_deps =
 	${env.lib_deps}
 	arduino-libraries/Ethernet
 	SPI
+	MDNS_Generic
+
+lib_ignore = WiFi101
+			WiFi101_Generic
+			WiFiEspAT
+			WiFiMulti_Generic
+			WiFiNINA_Generic
+
 monitor_speed = 115200
 monitor_echo = yes
 build_flags = 
 
+[env:mega2560-eth]
+platform = atmelavr
+board = megaatmega2560
+framework = arduino
+lib_deps = 
+    ${env.lib_deps}
+    arduino-libraries/Ethernet
+    MDNS_Generic
+    SPI
+lib_ignore = WiFi101
+            WiFi101_Generic
+            WiFiEspAT
+            WiFiMulti_Generic
+            WiFiNINA_Generic
+monitor_speed = 115200
+monitor_echo = yes
+
 [env:mega328]
 platform = atmelavr
 board = uno
@@ -222,14 +247,14 @@ monitor_echo = yes
 ; Commented out by default as the F446ZE needs variant files
 ; installed before you can let PlatformIO see this
 ;
-; [env:Nucleo-F446ZE]
+[env:Nucleo-F446ZE]
-; platform = ststm32
+platform = ststm32
-; board = nucleo_f446ze
+board = nucleo_f446ze
-; framework = arduino
+framework = arduino
-; lib_deps = ${env.lib_deps}
+lib_deps = ${env.lib_deps}
-; build_flags = -std=c++17  -Os -g2 -Wunused-variable
+build_flags = -std=c++17  -Os -g2 -Wunused-variable
-; monitor_speed = 115200
+monitor_speed = 115200
-; monitor_echo = yes
+monitor_echo = yes
 
 ; Commented out by default as the F412ZG needs variant files
 ; installed before you can let PlatformIO see this
@@ -246,6 +271,24 @@ monitor_echo = yes
 
 ; Experimental - Ethernet work still in progress
 ;
+[env:Nucleo-F429ZI]
+platform = ststm32
+board = nucleo_f429zi
+framework = arduino
+lib_deps = ${env.lib_deps}
+			stm32duino/STM32Ethernet @ ^1.3.0
+			stm32duino/STM32duino LwIP @ ^2.1.2
+			MDNS_Generic
+lib_ignore = WiFi101
+			WiFi101_Generic
+			WiFiEspAT
+			WiFiMulti_Generic
+			WiFiNINA_Generic
+build_flags = -std=c++17 -Os -g2 -Wunused-variable
+monitor_speed = 115200
+monitor_echo = yes
+upload_protocol = stlink
+
 ; [env:Nucleo-F429ZI]
 ; platform = ststm32
 ; board = nucleo_f429zi

version.h

@@ -3,7 +3,17 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.74"
+#define VERSION "5.2.80"
+// 5.2.80 - EthernetInterface upgrade
+// 5.2.79 - serial manager loop that handles quoted strings
+//        - WiFiESP32 reconfig
+// 5.2.78 - NeoPixel support.
+//        - <o command
+//        - HAL driver 
+//        - EXRAIL NEOPIXEL and NEOPIXEL_SIGNAL   
+// 5.2.77 - Withrottle: Implement "force function" subcommand "f"
+// 5.2.76 - Bugfix: EXRAIL: Catch CV read errors in the callback
+// 5.2.75 - Bugfix: Serial lines 4 to 6 OK
 // 5.2.74 - Bugfix: ESP32 turn on the joined prog (as main) again after a prog operation
 // 5.2.73 - Bugfix: STM32 further fixes to shadowPORT entries in TrackManager.cpp for PORTG and PORTH
 // 5.2.72 - Bugfix: added shadowPORT entries in TrackManager.cpp for PORTG and PORTH on STM32, fixed typo in MotorDriver.cpp