Merge 2c133da140 into ed853eef1d

commit 4e57a80265.

DCC.h

@@ -43,9 +43,9 @@ const uint16_t LONG_ADDR_MARKER = 0x4000;
 // Allocations with memory implications..!
 // Base system takes approx 900 bytes + 8 per loco. Turnouts, Sensors etc are dynamically created
 #if defined(HAS_ENOUGH_MEMORY)
-const byte MAX_LOCOS = 50;
-#else
-const byte MAX_LOCOS = 30;
+const byte MAX_LOCOS = 50;  // Default 50 for Mega2560,  Increase for ESP32 and STM32 Nucleo 
+#else                       // Adjust Max Locos as needed.
+const byte MAX_LOCOS = 10;  // Lower Max Loco for Uno CS, Recommended as a JMRI DecoderPro Programming Station 
 #endif
 
 class DCC

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202406182019Z"
+#define GITHUB_SHA "devel-202408080849Z"

MotorDriver.cpp

@@ -1,5 +1,6 @@
 /*
  *  © 2022-2024 Paul M Antoine
+ *  © 2024 Herb Morton
  *  © 2021 Mike S
  *  © 2021 Fred Decker
  *  © 2020-2023 Harald Barth
@@ -98,7 +99,7 @@ MotorDriver::MotorDriver(int16_t power_pin, byte signal_pin, byte signal_pin2, i
   if (HAVE_PORTH(fastSignalPin.inout == &PORTH)) {
     DIAG(F("Found PORTH pin %d"),signalPin);
     fastSignalPin.shadowinout = fastSignalPin.inout;
-    fastSignalPin.inout = &shadowPORTF;
+    fastSignalPin.inout = &shadowPORTH;
   }
 
   signalPin2=signal_pin2;

TrackManager.cpp

@@ -1,6 +1,8 @@
 /*
  *  © 2022 Chris Harlow
  *  © 2022-2024 Harald Barth
+ *  © 2023-2024 Paul M. Antoine
+ *  © 2024 Herb Morton
  *  © 2023 Colin Murdoch
  *  All rights reserved.
  *  
@@ -149,6 +151,8 @@ void TrackManager::setDCCSignal( bool on) {
   HAVE_PORTD(shadowPORTD=PORTD);
   HAVE_PORTE(shadowPORTE=PORTE);
   HAVE_PORTF(shadowPORTF=PORTF);
+  HAVE_PORTG(shadowPORTF=PORTG);
+  HAVE_PORTH(shadowPORTF=PORTH);
   APPLY_BY_MODE(TRACK_MODE_MAIN,setSignal(on));
   HAVE_PORTA(PORTA=shadowPORTA);
   HAVE_PORTB(PORTB=shadowPORTB);
@@ -156,6 +160,8 @@ void TrackManager::setDCCSignal( bool on) {
   HAVE_PORTD(PORTD=shadowPORTD);
   HAVE_PORTE(PORTE=shadowPORTE);
   HAVE_PORTF(PORTF=shadowPORTF);
+  HAVE_PORTG(shadowPORTF=PORTG);
+  HAVE_PORTH(shadowPORTF=PORTH);
 }
 
 // setPROGSignal(), called from interrupt context
@@ -167,6 +173,8 @@ void TrackManager::setPROGSignal( bool on) {
   HAVE_PORTD(shadowPORTD=PORTD);
   HAVE_PORTE(shadowPORTE=PORTE);
   HAVE_PORTF(shadowPORTF=PORTF);
+  HAVE_PORTG(shadowPORTF=PORTG);
+  HAVE_PORTH(shadowPORTF=PORTH);
   APPLY_BY_MODE(TRACK_MODE_PROG,setSignal(on));
   HAVE_PORTA(PORTA=shadowPORTA);
   HAVE_PORTB(PORTB=shadowPORTB);
@@ -174,6 +182,8 @@ void TrackManager::setPROGSignal( bool on) {
   HAVE_PORTD(PORTD=shadowPORTD);
   HAVE_PORTE(PORTE=shadowPORTE);
   HAVE_PORTF(PORTF=shadowPORTF);
+  HAVE_PORTG(shadowPORTF=PORTG);
+  HAVE_PORTH(shadowPORTF=PORTH);
 }
 
 // setDCSignal(), called from normal context
@@ -631,23 +641,25 @@ void TrackManager::setJoinRelayPin(byte joinRelayPin) {
 
 void TrackManager::setJoin(bool joined) {
 #ifdef ARDUINO_ARCH_ESP32
-  if (joined) {
+  if (joined) {                                          // if we go into joined mode (PROG acts as MAIN)
     FOR_EACH_TRACK(t) {
-      if (track[t]->getMode() & TRACK_MODE_PROG) {
-	tempProgTrack = t;
+      if (track[t]->getMode() & TRACK_MODE_PROG) {       // find PROG track
+	tempProgTrack = t;                               // remember PROG track
 	setTrackMode(t, TRACK_MODE_MAIN);
-	break;
+	track[t]->setPower(POWERMODE::ON);               // if joined, always on
+	break;                                           // there is only one prog track, done
       }
     }
   } else {
     if (tempProgTrack != MAX_TRACKS+1) {
-      // as setTrackMode with TRACK_MODE_PROG defaults to
-      // power off, we will take the current power state
-      // of our track and then preserve that state.
-      POWERMODE tPTmode = track[tempProgTrack]->getPower(); //get current power status of this track
-      setTrackMode(tempProgTrack, TRACK_MODE_PROG);
-      track[tempProgTrack]->setPower(tPTmode);              //set track status as it was before
+      // setTrackMode defaults to power off, so we
+      // need to preserve that state.
+      POWERMODE tPTmode = track[tempProgTrack]->getPower(); // get current power status of this track
+      setTrackMode(tempProgTrack, TRACK_MODE_PROG);         // set track mode back to prog
+      track[tempProgTrack]->setPower(tPTmode);              // set power status as it was before
       tempProgTrack = MAX_TRACKS+1;
+    } else {
+      DIAG(F("Unjoin but no remembered prog track"));
     }
   }
 #endif

version.h

@@ -3,7 +3,10 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.71"
+#define VERSION "5.2.74"
+// 5.2.74 - Bugfix: ESP32 turn on the joined prog (as main) again after a prog operation
+// 5.2.73 - Bugfix: STM32 further fixes to shadowPORT entries in TrackManager.cpp for PORTG and PORTH
+// 5.2.72 - Bugfix: added shadowPORT entries in TrackManager.cpp for PORTG and PORTH on STM32, fixed typo in MotorDriver.cpp
 // 5.2.71 -  Broadcasts of loco forgets. 
 // 5.2.70 -  IO_RocoDriver renamed to IO_EncoderThrottle.
 //        -  and included in IODEvice.h (circular dependency removed)