DCCEXParser.cpp

@@ -286,8 +286,6 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
 
         if (direction < 0 || direction > 1)
             break; // invalid direction code
-	if (cab > 10239 || cab < 0)
-	    break; // beyond DCC range
 
         DCC::setThrottle(cab, tspeed, direction);
         if (params == 4) // send obsolete format T response

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202305072222Z"
+#define GITHUB_SHA "devel-202305051413Z"

MotorDrivers.h

@@ -1,7 +1,7 @@
 /*
- *  © 2022-2023 Paul M. Antoine
+ *  © 2022 Paul M. Antoine
  *  © 2021 Fred Decker
- *  © 2020-2023 Harald Barth
+ *  © 2020-2022 Harald Barth
  *  (c) 2020 Chris Harlow. All rights reserved.
  *  (c) 2021 Fred Decker.  All rights reserved.
  *  (c) 2020 Harald Barth. All rights reserved.
@@ -60,8 +60,7 @@
 // Arduino STANDARD Motor Shield, used on different architectures:
 
 #if defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_ARCH_STM32)
-// Standard Motor Shield definition for 3v3 processors (other than the ESP32)
-// Setup for SAMD21 Sparkfun DEV board MUST use Arduino Motor Shield R3 (MUST be R3
+// Setup for SAMD21 Sparkfun DEV board using Arduino standard Motor Shield R3 (MUST be R3
 // for 3v3 compatibility!!) senseFactor for 3.3v systems is 1.95 as calculated when using
 // 10-bit A/D samples, and for 12-bit samples it's more like 0.488, but we probably need
 // to tweak both these
@@ -71,12 +70,6 @@
 #define SAMD_STANDARD_MOTOR_SHIELD STANDARD_MOTOR_SHIELD
 #define STM32_STANDARD_MOTOR_SHIELD STANDARD_MOTOR_SHIELD
 
-// EX 8874 based shield connected to a 3V3 system with 12-bit (4096) ADC
-#define EX8874_SHIELD F("EX8874"), \
- new MotorDriver( 3, 12, UNUSED_PIN, 9, A0, 1.27, 5000, -A4), \
- new MotorDriver(11, 13, UNUSED_PIN, 8, A1, 1.27, 5000, -A5)
-
-
 #elif defined(ARDUINO_ARCH_ESP32)
 // STANDARD shield on an ESPDUINO-32 (ESP32 in Uno form factor). The shield must be eiter the
 // 3.3V compatible R3 version or it has to be modified to not supply more than 3.3V to the
@@ -87,11 +80,9 @@
  new MotorDriver(25/* 3*/, 19/*12*/, UNUSED_PIN, 13/*9*/, 35/*A2*/, 0.70, 1500, UNUSED_PIN), \
  new MotorDriver(23/*11*/, 18/*13*/, UNUSED_PIN, 12/*8*/, 34/*A3*/, 0.70, 1500, UNUSED_PIN)
 
-// EX 8874 based shield connected to a 3.3V system (like ESP32) and 12bit (4096) ADC
-// numbers are GPIO numbers. comments are UNO form factor shield pin numbers
 #define EX8874_SHIELD F("EX8874"),\
- new MotorDriver(25/* 3*/, 19/*12*/, UNUSED_PIN, 13/*9*/, 35/*A2*/, 1.27, 5000, -36 /*-A4*/), \
- new MotorDriver(23/*11*/, 18/*13*/, UNUSED_PIN, 12/*8*/, 34/*A3*/, 1.27, 5000, -39 /*-A5*/)
+ new MotorDriver(25/* 3*/, 19/*12*/, UNUSED_PIN, 13/*9*/, 35/*A2*/, 1.17, 5000, -36 /*-A4*/), \
+ new MotorDriver(23/*11*/, 18/*13*/, UNUSED_PIN, 12/*8*/, 34/*A3*/, 1.17, 5000, -39 /*-A5*/)
 
 #else
 // STANDARD shield on any Arduino Uno or Mega compatible with the original specification.
@@ -101,12 +92,6 @@
 #define BRAKE_PWM_SWAPPED_MOTOR_SHIELD F("BPS_MOTOR_SHIELD"),                                       \
                               new MotorDriver(-9 , 12, UNUSED_PIN, -3, A0, 2.99, 1500, UNUSED_PIN), \
                               new MotorDriver(-8 , 13, UNUSED_PIN,-11, A1, 2.99, 1500, UNUSED_PIN)
-
-// EX 8874 based shield connected to a 5V system (like Arduino) and 10bit (1024) ADC
-#define EX8874_SHIELD F("EX8874"), \
- new MotorDriver( 3, 12, UNUSED_PIN, 9, A0, 5.08, 5000, -A4), \
- new MotorDriver(11, 13, UNUSED_PIN, 8, A1, 5.08, 5000, -A5)
-
 #endif
 
 // Pololu Motor Shield
@@ -135,6 +120,10 @@
    new MotorDriver(2, 7, UNUSED_PIN,  -9, A0, 10, 2500,  6), \
    new MotorDriver(4, 8, UNUSED_PIN, -10, A1, 10, 2500, 12)
 
+#define EX8874_SHIELD F("EX8874"), \
+ new MotorDriver( 3, 12, UNUSED_PIN, 9, A0, 4.86, 5000, -A4), \
+ new MotorDriver(11, 13, UNUSED_PIN, 8, A1, 4.86, 5000, -A5)
+
 // Firebox Mk1
 #define FIREBOX_MK1 F("FIREBOX_MK1"),                                                  \
                     new MotorDriver(3, 6, 7, UNUSED_PIN, A5, 9.766, 5500, UNUSED_PIN), \

Turnouts.cpp

@@ -250,7 +250,6 @@
       }
     }
     tt = (Turnout *)new ServoTurnout(id, vpin, thrownPosition, closedPosition, profile, closed);
-    DIAG(F("Turnout 0x%x size %d size %d"), tt, sizeof(Turnout),sizeof(struct TurnoutData));
     IODevice::writeAnalogue(vpin, closed ? closedPosition : thrownPosition, PCA9685::Instant);
     return tt;
 #else

WiThrottle.cpp

@@ -235,10 +235,6 @@ int WiThrottle::getLocoId(byte * cmd) {
 void WiThrottle::multithrottle(RingStream * stream, byte * cmd){ 
   char throttleChar=cmd[1];
   int locoid=getLocoId(cmd+3); // -1 for *
-  if (locoid > 10239 || locoid < -1) {
-    StringFormatter::send(stream, F("No valid DCC loco %d\n"), locoid);
-    return;
-  }
   byte * aval=cmd;
   while(*aval !=';' && *aval !='\0') aval++;
   if (*aval) aval+=2;  // skip ;>

version.h

@@ -4,8 +4,7 @@
 #include "StringFormatter.h"
 
 
-#define VERSION "4.2.50"
-// 4.2.50 - Fixes: estop all, turnout eeprom, cab ID check
+#define VERSION "4.2.48"
 // 4.2.49 - Exrail SPEED take notice of external direction change 
 // 4.2.48 - BROADCAST/WITHROTTLE Exrail macros 
 // 4.2.47 - Correct response to <JA 0>