mirror of
https://github.com/DCC-EX/CommandStation-EX.git
synced 2024-12-04 21:35:04 +01:00
24 lines
2.2 KiB
Markdown
24 lines
2.2 KiB
Markdown
# CommandStation-EX Release Notes
|
|
|
|
## v3.0.0
|
|
|
|
- **WiFi Support** - AP and station modes supported. Auto-detection of an ESP8266 WiFi module with AT firmware on a Mega's serial port. Connection to JMRI and WiThrottle clients.
|
|
- **Withrottle Integrations** - Act as a host for four WiThrottle clients concurrently.
|
|
- **Add LCD/OLED support** - OLED supported on Mega only
|
|
- **Improved CV programming routines** - checks for length of CV pulse, and breaks out of the wait state once it has received an ACK, now reading one CV per second.
|
|
- **Improved current sensing** - rewrote current sensing routines for safer operation. Current thresholds based on milliamps, not magic numbers
|
|
- **Individual track power control** - Ability to toggle power on either or both tracks, and to "JOIN" the tracks and make them output the same waveform for multiple power districts.
|
|
- **Single or Dual-Pin PWM output** - Allows control of H-bridges with PH/EN or dual PWM inputs
|
|
- **New, simpler function command** - ```<F>``` command allows setting functions based on their number, not based on a code as in ```<f>```
|
|
- **Function reminders** - Function reminders are sent in addition to speed reminders
|
|
- **Functions to F28** - All NMRA functions are now supported
|
|
- **Filters and user functions** - Ability to filter commands in the parser and execute custom code based on them
|
|
- **Diagnostic ```<D>``` commands** - See documentation for a full list of new diagnostic commands
|
|
- **Rewrote DCC++ Parser** - more efficient operation, accepts multi-char input and uses less RAM
|
|
- **Rewritten waveform generator** - capable of using any pin for DCC waveform out, eliminating the need for jumpers
|
|
- **Rewritten packet generator** - Simplify and make smaller, remove idea of "registers" from original code
|
|
- **Add free RAM messages** - Free RAM messages are now printed whenever there is a decerase in available RAM
|
|
- **Fix EEPROM bugs**
|
|
- **Support for more decoders** - Support for 20 (Uno) or 50 (Mega) mobile decoders, number automaticlaly recognized by JMRI.
|
|
- **Automatic slot managment** - slot variable in throttle/function commands are ignored and slot management is taken care of automatically. ```<!>``` command added to release locos from memory.
|