1
0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-23 21:01:25 +01:00
CommandStation-EX/version.h
Asbelos f577c11eb7 Correct ack diag msgs
Bug caused by unsigned ints >32k being displayed as negative int.
2022-01-17 15:56:16 +00:00

59 lines
2.9 KiB
C

#ifndef version_h
#define version_h
#include "StringFormatter.h"
#define VERSION "3.2.0 rc12"
// 3.2.0 Major functional and non-functional changes.
// New HAL added for I/O (digital and analogue inputs and outputs, servos etc).
// Support for MCP23008, MCP23017 and PCF9584 I2C GPIO Extender modules.
// Support for PCA9685 PWM (servo) control modules.
// Support for analogue inputs on Arduino pins and on ADS111x I2C modules.
// Support for MP3 sound playback via DFPlayer module.
// Support for HC-SR04 Ultrasonic range sensor module.
// Support for VL53L0X Laser range sensor module (Time-Of-Flight).
// Native non-blocking I2C drivers for AVR and Nano architectures (fallback
// to blocking Wire library for other platforms).
// EEPROM layout change - deletes EEPROM contents on first start following upgrade.
// New EX-RAIL automation capability.
// Turnout class revised to expand turnout capabilities, new commands added.
// Output class now allows ID > 255.
// Configuration options to globally flip polarity of DCC Accessory states when driven
// from <a> command and <T> command.
// Increased use of display for showing loco decoder programming information.
// Can disable EEPROM code
// Can define border between long and short addresses
// Turnout and accessory states (thrown/closed = 0/1 or 1/0) can be set to match RCN-213
// Bugfix: one-off error in CIPSEND drop
// Bugfix: disgnostic display of ack pulses >32kus
// ...
// 3.1.7 Bugfix: Unknown locos should have speed forward
// 3.1.6 Make output ID two bytes and guess format/size of registered outputs found in EEPROM
// 3.1.5 Fix LCD corruption on power-up
// 3.1.4 Refactor OLED and LCD drivers and remove unused code
// 3.1.3 Add a loop delay to give more time for sensing an Ethernet cable connection
// 3.1.2 Eliminate wait after write when prog is joined or prog power is off
// 3.1.1 SH1106 OLED Display Offset Fix
// 3.0.16 Ignore CV1 bit 7 read rejected by decoder when identifying loco id.
// 3.0.15 only send function commands once, not 4 times
// 3.0.14 gap in ack tolerant fix, prog track power management over join fix.
// 3.0.13 Functions>127 fix
// 3.0.12 Fix HOSTNAME function for STA mode for WiFi
// 3.0.11 28 speedstep support
// 3.0.10 Teensy Support
// 3.0.9 rearranges serial newlines for the benefit of JMRI.
// 3.0.8 Includes <* *> wraps around DIAGs for the benefit of JMRI.
// 3.0.7 Includes merge from assortedBits (many changes) and ACK manager change for lazy decoders
// 3.0.6 Includes:
// Fix Bug that did not let us transmit 5 byte sized packets like PoM
// 3.0.5 Includes:
// Fix Fn Key startup with loco ID and fix state change for F16-28
// 3.0.4 Includes:
// Wifi startup bugfixes
// 3.0.3 Includes:
// <W addr> command to write loco address and clear consist
// <R> command will allow for consist address
// Startup commands implemented
#endif