dani/CommandStation-EX
1
0
Fork 0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-12-24 21:21:24 +01:00
Code Releases Activity
a0791b041c
CommandStation-EX/RMFTMacros.h
Asbelos a93f88d3b7 PRINT command
2021-08-10 16:32:23 +01:00

244 lines
7.7 KiB
C
Raw Blame History

/*
* © 2020,2021 Chris Harlow. All rights reserved.
*
* This file is part of CommandStation-EX
*
* This is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* It is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with CommandStation. If not, see <https://www.gnu.org/licenses/>.
*/
#ifndef RMFTMacros_H
#define RMFTMacros_H
// The entire automation script is contained within a byte array RMFT2::RouteCode[]
// made up of opcode and parameter pairs.
// ech opcode is a 1 byte operation plus 2 byte operand.
// The array is normally built using the macros below as this makes it easier
// to manage the cases where:
// - padding must be applied to ensure the correct alignment of the next instruction
// - large parameters must be split up
// - multiple parameters aligned correctly
// - a single macro requires multiple operations
// Descriptive texts for routes and animations are created in a sepaerate array RMFT2::RouteDescription[]
// but since the C preprocessor is such a wimp, we have to pass over the myAutomation.h 2 times with
// different macros.
// PRINT(msg) is implemented in a separate pass to create a getMessageText(id) function
#define V(val) ((int16_t)(val))&0x00FF,((int16_t)(val)>>8)&0x00FF
#define NOP 0,0
// CAUTION: The macros below are triple passed over myAutomation.h
// Pass 1 Macros convert descriptions to a flash string constant in withrottle format.
// Most macros are simply ignored in this pass.
#define ROUTE(id, description) "]\\[R" #id "}|{" description "}|{2"
#define AUTOMATION(id, description) "]\\[A" #id "}|{" description "}|{4"
#define EXRAIL const FLASH char RMFT2::RouteDescription[]=
#define ENDEXRAIL "";
#define ALIAS(name,value)
#define AFTER(sensor_id)
#define AMBER(signal_id)
#define AT(sensor_id)
#define CALL(route)
#define CLOSE(id)
#define DELAY(mindelay)
#define DELAYMINS(mindelay)
#define DELAYRANDOM(mindelay,maxdelay)
#define DONE
#define ENDIF
#define ENDTASK
#define ESTOP
#define FOFF(func)
#define FOLLOW(route)
#define FON(func)
#define FREE(blockid)
#define FWD(speed)
#define GREEN(signal_id)
#define IF(sensor_id)
#define IFNOT(sensor_id)
#define IFRANDOM(percent)
#define IFRESERVE(block)
#define INVERT_DIRECTION
#define JOIN
#define LATCH(sensor_id)
#define ONCLOSE(turnout_id)
#define ONTHROW(turnout_id)
#define PAUSE
#define PRINT(msg)
#define POM(cv,value)
#define READ_LOCO
#define RED(signal_id)
#define RESERVE(blockid)
#define RESET(sensor_id)
#define RESUME
#define RETURN
#define REV(speed)
#define START(route)
#define SERVO(id,position,profile)
#define SETLOCO(loco)
#define SET(sensor_id)
#define SEQUENCE(id)
#define SPEED(speed)
#define STOP
#undef SIGNAL
#define SIGNAL(redpin,amberpin,greenpin)
#define SERVO_TURNOUT(pin,activeAngle,inactiveAngle)
#define PIN_TURNOUT(pin)
#define THROW(id)
#define TURNOUT(id,addr,subaddr)
#define UNJOIN
#define UNLATCH(sensor_id)
#include "myAutomation.h"
// setup for pass 2... Create getMessageText function
#undef ROUTE
#undef AUTOMATION
#define ROUTE(id, description)
#define AUTOMATION(id, description)
#undef EXRAIL
#undef PRINT
#undef ENDEXRAIL
const int PrintMacroTracker1=__COUNTER__;
#define EXRAIL void RMFT2::printMessage(uint16_t id) { switch(id) {
#define ENDEXRAIL default: DIAG(F("printMessage error %d %d"),id,PrintMacroTracker1); return ; }}
#define PRINT(msg) case (__COUNTER__ - PrintMacroTracker1) : printMessage2(F(msg));break;
#include "myAutomation.h"
#undef ALIAS
#undef AFTER
#undef AMBER
#undef AT
#undef AUTOMATION
#undef CALL
#undef CLOSE
#undef DELAY
#undef DELAYMINS
#undef DELAYRANDOM
#undef DONE
#undef ENDIF
#undef ENDEXRAIL
#undef ENDTASK
#undef ESTOP
#undef EXRAIL
#undef FOFF
#undef FOLLOW
#undef FON
#undef FREE
#undef FWD
#undef GREEN
#undef IF
#undef IFNOT
#undef IFRANDOM
#undef IFRESERVE
#undef INVERT_DIRECTION
#undef JOIN
#undef LATCH
#undef ONCLOSE
#undef ONTHROW
#undef PAUSE
#undef POM
#undef PRINT
#undef READ_LOCO
#undef RED
#undef RESERVE
#undef RESET
#undef RESUME
#undef RETURN
#undef REV
#undef ROUTE
#undef START
#undef SEQUENCE
#undef SERVO
#undef SETLOCO
#undef SET
#undef SPEED
#undef STOP
#undef SIGNAL
#undef SERVO_TURNOUT
#undef PIN_TURNOUT
#undef THROW
#undef TURNOUT
#undef UNJOIN
#undef UNLATCH
// Define macros or route code creation
#define ALIAS(name,value) const int name=value;
#define EXRAIL const FLASH byte RMFT2::RouteCode[] = {
#define AUTOMATION(id, description) OPCODE_AUTOMATION, V(id),
#define ROUTE(id, description) OPCODE_ROUTE, V(id),
#define SEQUENCE(id) OPCODE_SEQUENCE, V(id),
#define ENDTASK OPCODE_ENDTASK,NOP,
#define DONE OPCODE_ENDTASK,NOP,
#define ENDEXRAIL OPCODE_ENDTASK,NOP,OPCODE_ENDEXRAIL,NOP };
#define AFTER(sensor_id) OPCODE_AT,V(sensor_id),OPCODE_AFTER,V(sensor_id),
#define AMBER(signal_id) OPCODE_AMBER,V(signal_id),
#define AT(sensor_id) OPCODE_AT,V(sensor_id),
#define CALL(route) OPCODE_CALL,V(route),
#define CLOSE(id) OPCODE_CLOSE,V(id),
#define DELAY(ms) OPCODE_DELAY,V(ms/100),
#define DELAYMINS(mindelay) OPCODE_DELAYMINS,V(mindelay),
#define DELAYRANDOM(mindelay,maxdelay) OPCODE_DELAY,V(mindelay/100),OPCODE_RANDWAIT,V((maxdelay-mindelay)/100),
#define ENDIF OPCODE_ENDIF,NOP,
#define ESTOP OPCODE_SPEED,V(1),
#define FOFF(func) OPCODE_FOFF,V(func),
#define FOLLOW(route) OPCODE_FOLLOW,V(route),
#define FON(func) OPCODE_FON,V(func),
#define FREE(blockid) OPCODE_FREE,V(blockid),
#define FWD(speed) OPCODE_FWD,V(speed),
#define GREEN(signal_id) OPCODE_GREEN,V(signal_id),
#define IF(sensor_id) OPCODE_IF,V(sensor_id),
#define IFNOT(sensor_id) OPCODE_IFNOT,V(sensor_id),
#define IFRANDOM(percent) OPCODE_IFRANDOM,V(percent),
#define IFRESERVE(block) OPCODE_IFRESERVE,V(block),
#define INVERT_DIRECTION OPCODE_INVERT_DIRECTION,NOP,
#define JOIN OPCODE_JOIN,NOP,
#define LATCH(sensor_id) OPCODE_LATCH,V(sensor_id),
#define ONCLOSE(turnout_id) OPCODE_ONCLOSE,V(turnout_id),
#define ONTHROW(turnout_id) OPCODE_ONTHROW,V(turnout_id),
#define PAUSE OPCODE_PAUSE,NOP,
#define POM(cv,value) OPCODE_POM,V(cv),OPCODE_PAD,V(value),
#define READ_LOCO OPCODE_READ_LOCO1,NOP,OPCODE_READ_LOCO2,NOP,
#define RED(signal_id) OPCODE_RED,V(signal_id),
#define RESERVE(blockid) OPCODE_RESERVE,V(blockid),
#define RESET(sensor_id) OPCODE_RESET,V(sensor_id),
#define RESUME OPCODE_RESUME,NOP,
#define RETURN OPCODE_RETURN,NOP,
#define REV(speed) OPCODE_REV,V(speed),
#define START(route) OPCODE_START,V(route),
#define SERVO(id,position,profile) OPCODE_SERVO,V(id),OPCODE_PAD,V(position),OPCODE_PAD,V(profile),
#define SETLOCO(loco) OPCODE_SETLOCO,V(loco),
#define SET(sensor_id) OPCODE_SET,V(sensor_id),
#define SPEED(speed) OPCODE_SPEED,V(speed),
#define STOP OPCODE_SPEED,V(0),
#define SIGNAL(redpin,amberpin,greenpin) OPCODE_SIGNAL,V(redpin),OPCODE_PAD,V(amberpin),OPCODE_PAD,V(greenpin),
#define SERVO_TURNOUT(pin,activeAngle,inactiveAngle) OPCODE_SERVOTURNOUT,V(pin),OPCODE_PAD,V(actibeAngle),OPCODE
#define PIN_TURNOUT(pin) OPCODE_PINTURNOUT,V(pin),
#define PRINT(msg) OPCODE_PRINT,V(__COUNTER__ - PrintMacroTracker2),
#define THROW(id) OPCODE_THROW,V(id),
#define TURNOUT(id,addr,subaddr) OPCODE_TURNOUT,V(id),OPCODE_PAD,V(addr),OPCODE_PAD,V(subaddr),
#define UNJOIN OPCODE_UNJOIN,NOP,
#define UNLATCH(sensor_id) OPCODE_UNLATCH,V(sensor_id),
// PASS2 Build RouteCode
const int PrintMacroTracker2=__COUNTER__;
#include "myAutomation.h"
//==================
#endif
View Git Blame Copy Permalink