Add Arduino sketch svg

arduino/eeprom_get/eeprom_get.ino

@@ -1,64 +0,0 @@
-/***
-    eeprom_get example.
-
-    This shows how to use the EEPROM.get() method.
-
-    To pre-set the EEPROM data, run the example sketch eeprom_put.
-    This sketch will run without it, however, the values shown
-    will be shown from what ever is already on the EEPROM.
-
-    This may cause the serial object to print out a large string
-    of garbage if there is no null character inside one of the strings
-    loaded.
-
-    Written by Christopher Andrews 2015
-    Released under MIT licence.
-***/
-
-#include <EEPROM.h>
-
-void setup() {
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for native USB port only
-  }
-  readConfig(); //Run the next test.
-}
-
-struct config {
-  byte mac[6];
-  byte remoteAddr[4];
-  char serial[4];
-  int remotePort;
-  char name[128];
-};
-
-void printAddr(byte addr[], int size, Stream *stream) {
-  for (int thisByte = 0; thisByte < size; thisByte++) {
-    // print the value of each byte of the IP address:
-    stream->print(addr[thisByte], HEX);
-    if (thisByte < size - 1) {
-      stream->print(".");
-    }
-  }
-}
-
-void readConfig() {
-  int eeAddress = 0; //Move address to the next byte after float 'f'.
-
-  config customVar; //Variable to store custom object read from EEPROM.
-  EEPROM.get(eeAddress, customVar);
-
-  Serial.println("Read custom object from EEPROM: ");
-  printAddr(customVar.mac, sizeof(customVar.mac), &Serial);
-  Serial.println();
-  printAddr(customVar.remoteAddr, sizeof(customVar.remoteAddr), &Serial);
-  Serial.println();
-  Serial.println(customVar.remotePort);
-  Serial.println(customVar.serial);
-  Serial.println(customVar.name);
-}
-
-void loop() {
-  /* Empty loop */
-}

arduino/eeprom_put/eeprom_put.ino

@@ -1,53 +0,0 @@
-/***
-    eeprom_put example.
-
-    This shows how to use the EEPROM.put() method.
-    Also, this sketch will pre-set the EEPROM data for the
-    example sketch eeprom_get.
-
-    Note, unlike the single byte version EEPROM.write(),
-    the put method will use update semantics. As in a byte
-    will only be written to the EEPROM if the data is actually
-    different.
-
-    Written by Christopher Andrews 2015
-    Released under MIT licence.
-***/
-
-#include <EEPROM.h>
-
-struct config {
-  byte mac[6];
-  byte remoteAddr[4];
-  char serial[4];
-  int remotePort;
-  char name[128];
-};
-
-void setup() {
-
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for native USB port only
-  }
-  
-  int eeAddress = 0;   //Location we want the data to be put.
-
-  /** Put is designed for use with custom structures also. **/
-
-  //Data to store.
-  config customVar = {
-    { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED },
-    { 192, 168, 10, 123 },
-    "abcd",
-    80,
-    "sensor.server.domain"
-  };
-
-  EEPROM.put(eeAddress, customVar);
-  Serial.print("Written custom data type! \n\nView the example sketch eeprom_get to see how you can retrieve the values!");
-}
-
-void loop() {
-  /* Empty loop */
-}