Harald Barth
77ee57eb83
give up eventually
2021-11-02 17:50:32 +01:00
Harald Barth
837b0a9fb6
typo
2021-10-31 23:46:25 +01:00
Harald Barth
a109ba4e01
unknown locos should have speed forward
2021-10-31 23:35:28 +01:00
Harald Barth
055bc7bfe2
unknown locos should have speed forward
2021-10-31 22:20:59 +01:00
Harald Barth
79ce71c2f9
Committing a SHA
2021-10-31 21:18:17 +00:00
Harald Barth
e3cbaf5f24
unknown locos should have speed forward
2021-10-31 22:17:51 +01:00
Harald Barth
c87a80928b
special tag
2021-10-31 22:06:22 +01:00
Harald Barth
c5b283bd8c
should compile for all boards
2021-10-31 01:10:13 +02:00
Harald Barth
500fe2f717
more diag messages
2021-10-31 00:40:35 +02:00
Harald Barth
278f7618f4
do something i AP mode
2021-10-31 00:10:58 +02:00
Harald Barth
250c372f5c
Committing a SHA
2021-10-29 20:30:40 +00:00
Harald Barth
a9c31eb1ae
YFROBOT: One more motor board with L298P
2021-10-29 22:30:01 +02:00
Harald Barth
9d74b0f6a5
set pinMode analog
2021-10-29 22:19:23 +02:00
Harald Barth
31059a615c
use ESP-IDF ADC functions instead of analogRead() which breaks waveform
2021-10-27 23:03:37 +02:00
Harald Barth
7d7b337f82
on ESP32 currently WIFI should be on
2021-10-24 19:38:07 +02:00
Harald Barth
05eb0d763a
explain ESP32 watchdog
2021-10-24 12:59:28 +02:00
Harald Barth
b6cfc39d23
ESP32 watchdog workaround (with diag code)
2021-10-24 12:09:54 +02:00
Harald Barth
8a0ddb0d74
ESP32 I/O info
2021-10-22 08:35:29 +02:00
Harald Barth
faeb3194db
ESP32 motorshield as default
2021-10-22 08:21:44 +02:00
Asbelos
b9fed47d24
Merge branch 'EX-RAIL' of https://github.com/DCC-EX/CommandStation-EX into EX-RAIL
2021-10-21 22:44:47 +01:00
Asbelos
151f7d7f86
Fixup EXRAIL Read Loco issues
2021-10-21 22:44:25 +01:00
Neil McKechnie
b7bcd13347
Fix Arduino pin pullup initial state.
...
If an Arduino pin was used as an input (e.g. by EXRAIL) without previously configuring it, the default pullup wouldn't be set up. Now, on first call to the _read() method the pullup will be enabled.
2021-10-21 16:43:42 +01:00
Neil McKechnie
4f16a4ca06
Fix GPIO Expander initial output state.
...
Previously, pullups were enabled on GPIO Expander digital pins by default, even if the pin was only ever used as an output. This could lead to a spurious HIGH state being seen by external equipment before the output is initialised to LOW. To avoid this, the pin pullup is now not enabled until a configure or read operation is issued for the pin.
2021-10-15 18:44:51 +01:00
Neil McKechnie
9097a62f42
Add new <D ANIN vpin> and <D ANOUT vpin value> commands.
...
Alias for existing <D SERVO ...> command added as <D ANOUT ...> (since not all analogue outputs are servos). Also, <D ANIN vpin> added to display the value of an analogue input pin.
2021-10-08 13:30:23 +01:00
Neil McKechnie
80472a76dc
I2CManager - support slower I2C speeds.
...
Previously the driver allowed speeds down to 32kHz but lower speeds were not implemented correctly.
2021-10-08 13:28:43 +01:00
Harald Barth
26bd3ac342
Example ESP motor shields
2021-10-05 21:55:13 +02:00
Harald Barth
d174c05127
Wifi connect and waveform
2021-10-05 21:53:02 +02:00
Neil McKechnie
6dde811279
Optimise HAL drivers for TOF sensor and Analogue Inputs
...
Increased use of async I2C in HAL drivers to reduce overall loop time overhead.
2021-10-05 12:48:45 +01:00
Harald Barth
75dffd9dfa
first ESP32 compile
2021-10-05 10:39:08 +02:00
Harald Barth
0a10dbea0b
not forget volatile
2021-10-04 23:12:47 +02:00
Harald Barth
43191e225e
first stab at ESP32
2021-10-04 23:03:36 +02:00
Harald Barth
50bb1c950b
less warnings
2021-10-03 19:58:05 +02:00
Neil McKechnie
7aed7de6cd
Change default LCD address.
...
LCD Backpack Address in example config.h changed to 0x27 (to match the most commonly available PCF8574 device).
2021-10-03 12:24:14 +01:00
Asbelos
bfc2b75eb5
SERIAL2 Typo
2021-10-01 11:01:32 +01:00
Harald Barth
0bb6b577fa
Wifi STA or AP mode
2021-10-01 11:32:09 +02:00
Harald Barth
cf0c818138
Cleanup ESP specific details
2021-10-01 09:09:30 +02:00
Harald Barth
426b27f0dd
Reworked use of ringbuffer
2021-09-30 22:55:14 +02:00
Harald Barth
19b4893b5f
counter should be int, not uint8_t
2021-09-28 21:08:41 +02:00
Harald Barth
1c7a5320d8
more send diag
2021-09-28 17:31:12 +02:00
Harald Barth
afd4626988
send diag
2021-09-28 17:20:44 +02:00
Harald Barth
a194b8965c
Ack read outside interrupt
2021-09-27 20:01:46 +02:00
Harald Barth
696d12fc5e
test A0
2021-09-26 11:57:15 +02:00
Harald Barth
35cba02ee7
outboundRing uses sendData
2021-09-26 10:59:07 +02:00
Harald Barth
fa1d1619b6
wifi sendData
2021-09-26 08:37:59 +02:00
Harald Barth
b048879eaa
Wifi active
2021-09-25 23:18:10 +02:00
Neil McKechnie
9fc805831d
HAL: Minor optimisations
...
Remove virtual method hasCallback().
Optimise findDevice() method (used by read, write etc.).
Simplify Sensor handling with regard to IO Devices that support callbacks.
2021-09-23 10:54:27 +01:00
Neil McKechnie
ffc5d91561
Update version.h
2021-09-23 08:59:43 +01:00
Neil McKechnie
e11fd18849
Update IO_DCCAccessory.cpp
...
Ensure the full range of addresses including 0 are handled.
2021-09-22 14:12:23 +01:00
Neil McKechnie
32eb8fe8c7
Update version.h (3.1.7draft)
...
Added partial list of changes from 3.1.6 to 3.1.7draft.
2021-09-22 14:00:05 +01:00
Neil McKechnie
e287af83ff
DCC Turnouts: Store address/subaddress separately. Enable address 0.
...
The range of accessory decoder addresses for the <a> command is 0-511 in line with the DCC packet contents. The turnout command previously rejected address 0; this has been changed to the same range of addresses can be used by both commands, i.e. address 0-511 and subaddress 0-3. The linear address mapping remains so that linear address 1 is addr/subaddr 1/0; i.e. the first decoder address is not accessible by linear address.
2021-09-22 10:38:11 +01:00
