Merge 2afb5f3d6c into fe2f705fa9

commit 4e57a80265.

CommandDistributor.cpp

@@ -37,7 +37,7 @@ int16_t lastclocktime;
 int8_t lastclockrate;
 
 
-#if WIFI_ON || ETHERNET_ON || defined(SERIAL1_COMMANDS) || defined(SERIAL2_COMMANDS) || defined(SERIAL3_COMMANDS)
+#if WIFI_ON || ETHERNET_ON || defined(SERIAL1_COMMANDS) || defined(SERIAL2_COMMANDS) || defined(SERIAL3_COMMANDS) || defined(SERIAL4_COMMANDS) || defined(SERIAL5_COMMANDS) || defined(SERIAL6_COMMANDS)
 // use a buffer to allow broadcast
 StringBuffer * CommandDistributor::broadcastBufferWriter=new StringBuffer();
 template<typename... Targs> void CommandDistributor::broadcastReply(clientType type, Targs... msg){
@@ -248,6 +248,10 @@ void  CommandDistributor::broadcastLoco(byte slot) {
 #endif
 }
 
+void  CommandDistributor::broadcastForgetLoco(int16_t loco) {
+  broadcastReply(COMMAND_TYPE, F("<l %d 0 1 0>\n<- %d>\n"), loco,loco);
+}
+
 void  CommandDistributor::broadcastPower() {
   char pstr[] = "? x";
   for(byte t=0; t<TrackManager::MAX_TRACKS; t++)

CommandDistributor.h

@@ -47,6 +47,7 @@ private:
 public :
   static void parse(byte clientId,byte* buffer, RingStream * ring);
   static void broadcastLoco(byte slot);
+  static void broadcastForgetLoco(int16_t loco);
   static void broadcastSensor(int16_t id, bool value);
   static void broadcastTurnout(int16_t id, bool isClosed);
   static void broadcastTurntable(int16_t id, uint8_t position, bool moving);

DCC.cpp

@@ -271,6 +271,20 @@ uint32_t DCC::getFunctionMap(int cab) {
   return (reg<0)?0:speedTable[reg].functions;
 }
 
+// saves DC frequency (0..3) in spare functions 29,30,31
+void DCC::setDCFreq(int cab,byte freq) {
+  if (cab==0 || freq>3) return;
+  auto reg=lookupSpeedTable(cab,true);
+  // drop and replace F29,30,31 (top 3 bits) 
+  auto newFunctions=speedTable[reg].functions & 0x1FFFFFFFUL;
+  if (freq==1)      newFunctions |= (1UL<<29); // F29
+  else if (freq==2) newFunctions |= (1UL<<30); // F30
+  else if (freq==3) newFunctions |= (1UL<<31); // F31
+  if (newFunctions==speedTable[reg].functions) return; // no change 
+  speedTable[reg].functions=newFunctions;
+  CommandDistributor::broadcastLoco(reg);
+}
+
 void DCC::setAccessory(int address, byte port, bool gate, byte onoff /*= 2*/) {
   // onoff is tristate:
   // 0  => send off packet
@@ -728,11 +742,15 @@ void DCC::forgetLoco(int cab) {  // removes any speed reminders for this loco
   if (reg>=0) {
     speedTable[reg].loco=0;
     setThrottle2(cab,1); // ESTOP if this loco still on track
+    CommandDistributor::broadcastForgetLoco(cab);
   }
 }
 void DCC::forgetAllLocos() {  // removes all speed reminders
   setThrottle2(0,1); // ESTOP all locos still on track
-  for (int i=0;i<MAX_LOCOS;i++) speedTable[i].loco=0;
+  for (int i=0;i<MAX_LOCOS;i++) {
+    if (speedTable[i].loco) CommandDistributor::broadcastForgetLoco(speedTable[i].loco);
+    speedTable[i].loco=0;
+  }
 }
 
 byte DCC::loopStatus=0;

DCC.h

@@ -70,6 +70,7 @@ public:
   static void changeFn(int cab, int16_t functionNumber);
   static int8_t getFn(int cab, int16_t functionNumber);
   static uint32_t getFunctionMap(int cab);
+  static void setDCFreq(int cab,byte freq);
   static void updateGroupflags(byte &flags, int16_t functionNumber);
   static void setAccessory(int address, byte port, bool gate, byte onoff = 2);
   static bool setExtendedAccessory(int16_t address, int16_t value, byte repeats=3);

DCCEXParser.cpp

@@ -642,6 +642,13 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
 
     case 'F': // New command to call the new Loco Function API <F cab func 1|0>
         if(params!=3) break; 
+        
+        if (p[1]=="DCFREQ"_hk) { // <F cab DCFREQ 0..3>
+          if (p[2]<0 || p[2]>3) break;
+          DCC::setDCFreq(p[0],p[2]);
+          return;    
+        }
+
         if (Diag::CMD)
             DIAG(F("Setting loco %d F%d %S"), p[0], p[1], p[2] ? F("ON") : F("OFF"));
         if (DCC::setFn(p[0], p[1], p[2] == 1)) return;

EXRAIL2.cpp

@@ -478,10 +478,15 @@ bool RMFT2::skipIfBlock() {
 
 
 /* static */ void RMFT2::readLocoCallback(int16_t cv) {
+  if (cv <= 0) {
+    DIAG(F("CV read error"));
+    progtrackLocoId = -1;
+    return;
+  }
   if (cv & LONG_ADDR_MARKER) {               // maker bit indicates long addr
     progtrackLocoId = cv ^ LONG_ADDR_MARKER; // remove marker bit to get real long addr
     if (progtrackLocoId <= HIGHEST_SHORT_ADDR ) {     // out of range for long addr
-      DIAG(F("Long addr %d <= %d unsupported\n"), progtrackLocoId, HIGHEST_SHORT_ADDR);
+      DIAG(F("Long addr %d <= %d unsupported"), progtrackLocoId, HIGHEST_SHORT_ADDR);
       progtrackLocoId = -1;
     }
   } else {
@@ -628,14 +633,16 @@ void RMFT2::loop2() {
     skipIf=blinkState!=at_timeout;
     break;
     
-  case OPCODE_AFTER: // waits for sensor to hit and then remain off for 0.5 seconds. (must come after an AT operation)
+  case OPCODE_AFTER: // waits for sensor to hit and then remain off for x mS. 
+    // Note, this must come after an AT operation, which is 
+    // automatically inserted by the AFTER macro. 
     if (readSensor(operand)) {
-      // reset timer to half a second and keep waiting
+      // reset timer and keep waiting
       waitAfter=millis();
       delayMe(50);
       return;
     }
-    if (millis()-waitAfter < 500 ) return;
+    if (millis()-waitAfter < getOperand(1) ) return;
     break;
 
   case OPCODE_AFTEROVERLOAD: // waits for the power to be turned back on - either by power routine or button
@@ -716,41 +723,7 @@ void RMFT2::loop2() {
 
   case OPCODE_SETFREQ:
       // Frequency is default 0, or 1, 2,3
-      //if (loco) DCC::setFn(loco,operand,true);
-      switch (operand) {
-        case 0:  // default - all F-s off
-            if (loco) {
-                DCC::setFn(loco,29,false);
-                DCC::setFn(loco,30,false);
-                DCC::setFn(loco,31,false);
-            }
-        break;
-        case 1:
-            if (loco) {
-	      DCC::setFn(loco,29,true);
-              DCC::setFn(loco,30,false);
-              DCC::setFn(loco,31,false);
-            }
-        break;
-        case 2:
-            if (loco) {
-	      DCC::setFn(loco,29,false);
-              DCC::setFn(loco,30,true);
-              DCC::setFn(loco,31,false);
-            }
-        break;
-        case 3:
-            if (loco) {
-	      DCC::setFn(loco,29,false);
-              DCC::setFn(loco,30,false);
-              DCC::setFn(loco,31,true);
-            }
-        break;
-      default:
-	; // do nothing
-	break;
-      }
-
+      DCC::setDCFreq(loco,operand);
       break;
 
   case OPCODE_RESUME:
@@ -953,11 +926,10 @@ void RMFT2::loop2() {
       delayMe(100);
       return; // still waiting for callback
     }
-    if (progtrackLocoId<0) {
-      kill(F("No Loco Found"),progtrackLocoId);
-      return; // still waiting for callback
-    }
     
+    // At failed read will result in loco == -1
+    // which is intended so it can be checked
+    // from within EXRAIL
     loco=progtrackLocoId;
     speedo=0;
     forward=true;

EXRAIL2MacroReset.h

@@ -195,7 +195,7 @@
 #ifndef RMFT2_UNDEF_ONLY
 #define ACTIVATE(addr,subaddr)
 #define ACTIVATEL(addr)
-#define AFTER(sensor_id)
+#define AFTER(sensor_id,timer...)
 #define AFTEROVERLOAD(track_id)
 #define ALIAS(name,value...)
 #define AMBER(signal_id)
@@ -334,7 +334,7 @@
 #define SET_TRACK(track,mode)
 #define SET_POWER(track,onoff)
 #define SETLOCO(loco) 
-#define SETFREQ(loco,freq)
+#define SETFREQ(freq)
 #define SIGNAL(redpin,amberpin,greenpin) 
 #define SIGNALH(redpin,amberpin,greenpin) 
 #define SPEED(speed) 

EXRAILMacros.h

@@ -463,7 +463,7 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 
 #define ACTIVATE(addr,subaddr) OPCODE_DCCACTIVATE,V(addr<<3 | subaddr<<1 | 1),
 #define ACTIVATEL(addr) OPCODE_DCCACTIVATE,V((addr+3)<<1 | 1),
-#define AFTER(sensor_id) OPCODE_AT,V(sensor_id),OPCODE_AFTER,V(sensor_id),
+#define AFTER(sensor_id,timer...) OPCODE_AT,V(sensor_id),OPCODE_AFTER,V(sensor_id),OPCODE_PAD,V(#timer[0]?timer+0:500),
 #define AFTEROVERLOAD(track_id) OPCODE_AFTEROVERLOAD,V(TRACK_NUMBER_##track_id),
 #define ALIAS(name,value...) 
 #define AMBER(signal_id) OPCODE_AMBER,V(signal_id),
@@ -620,7 +620,7 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 #define SET_TRACK(track,mode)  OPCODE_SET_TRACK,V(TRACK_MODE_##mode  <<8 | TRACK_NUMBER_##track),
 #define SET_POWER(track,onoff) OPCODE_SET_POWER,V(TRACK_POWER_##onoff),OPCODE_PAD, V(TRACK_NUMBER_##track),
 #define SETLOCO(loco) OPCODE_SETLOCO,V(loco),
-#define SETFREQ(loco,freq) OPCODE_SETLOCO,V(loco), OPCODE_SETFREQ,V(freq),
+#define SETFREQ(freq) OPCODE_SETFREQ,V(freq),
 #define SIGNAL(redpin,amberpin,greenpin) 
 #define SIGNALH(redpin,amberpin,greenpin) 
 #define SPEED(speed) OPCODE_SPEED,V(speed),

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202406182019Z"
+#define GITHUB_SHA "devel-202409121220Z"

IODevice.h

@@ -547,6 +547,6 @@ protected:
 #include "IO_duinoNodes.h"
 #include "IO_EXIOExpander.h"
 #include "IO_trainbrains.h"
-
+#include "IO_EncoderThrottle.h"
 
 #endif // iodevice_h

IO_EncoderThrottle.cpp

@@ -0,0 +1,144 @@
+/*
+ *  © 2024, Chris Harlow. All rights reserved.
+ *
+ *  This file is part of EX-CommandStation
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+/*
+* The IO_EncoderThrottle device driver uses a rotary encoder connected to vpins
+* to drive a loco.
+*  Loco id is selected by writeAnalog.
+*/
+
+#include "IODevice.h"
+#include "DIAG.h"
+#include "DCC.h"
+
+const byte _DIR_CW = 0x10;  // Clockwise step
+const byte _DIR_CCW = 0x20;  // Counter-clockwise step
+
+const byte transition_table[5][4]= {
+    {0,1,3,0},            // 0: 00
+    {1,1,1,2 | _DIR_CW},  // 1: 00->01
+    {2,2,0,2},            // 2: 00->01->11
+    {3,3,3,4 | _DIR_CCW}, // 3: 00->10
+    {4,0,4,4}             // 4: 00->10->11
+};
+
+const byte _STATE_MASK = 0x07;
+const byte _DIR_MASK = 0x30;
+
+
+
+  void EncoderThrottle::create(VPIN firstVpin, int dtPin, int clkPin, int clickPin, byte notch) {
+    if (checkNoOverlap(firstVpin)) new EncoderThrottle(firstVpin, dtPin,clkPin,clickPin,notch);
+  }
+
+
+  // Constructor
+  EncoderThrottle::EncoderThrottle(VPIN firstVpin, int dtPin, int clkPin, int clickPin, byte notch){
+    _firstVpin = firstVpin;
+    _nPins = 1;
+    _I2CAddress = 0;
+    _dtPin=dtPin;
+    _clkPin=clkPin;
+    _clickPin=clickPin;
+    _notch=notch;
+    _locoid=0;
+    _stopState=xrSTOP;
+    _rocoState=0; 
+    _prevpinstate=4; // not 01..11 
+    IODevice::configureInput(dtPin,true);
+    IODevice::configureInput(clkPin,true);
+    IODevice::configureInput(clickPin,true);
+    addDevice(this);
+    _display();
+  }
+
+  
+
+  void EncoderThrottle::_loop(unsigned long currentMicros)  {
+    if (_locoid==0) return;  // not in use
+    
+    // Clicking down on the roco, stops the loco and sets the direction as unknown.
+  if (IODevice::read(_clickPin)) {
+    if (_stopState==xrSTOP) return; // debounced multiple stops
+    DCC::setThrottle(_locoid,1,DCC::getThrottleDirection(_locoid));
+    _stopState=xrSTOP;
+    DIAG(F("DRIVE %d STOP"),_locoid);
+    return; 
+  }
+
+  // read roco pins and detect state change 
+  byte pinstate = (IODevice::read(_dtPin) << 1) | IODevice::read(_clkPin);
+  if (pinstate==_prevpinstate) return;
+  _prevpinstate=pinstate;
+
+  _rocoState = transition_table[_rocoState & _STATE_MASK][pinstate];
+  if ((_rocoState & _DIR_MASK) == 0) return; // no value change 
+
+  int change=(_rocoState & _DIR_CW)?+1:-1;
+  // handle roco change -1 or +1 (clockwise)
+  
+  if (_stopState==xrSTOP) {
+      // first move after button press sets the direction. (clockwise=fwd)
+      _stopState=change>0?xrFWD:xrREV;
+    }
+
+    // when going fwd, clockwise increases speed. 
+    // but when reversing, anticlockwise increases speed.
+    // This is similar to a center-zero pot control but with
+    // the added safety that you cant panic-spin into the other
+    // direction.
+    if (_stopState==xrREV) change=-change; 
+    //  manage limits
+    int oldspeed=DCC::getThrottleSpeed(_locoid);
+    if (oldspeed==1)oldspeed=0; // break out of estop
+    int  newspeed=change>0 ?  (min((oldspeed+_notch),126)) : (max(0,(oldspeed-_notch)));
+    if (newspeed==1) newspeed=0; // normal decelereated stop. 
+    if (oldspeed!=newspeed) {
+        DIAG(F("DRIVE %d notch %S %d %S"),_locoid,
+             change>0?F("UP"):F("DOWN"),_notch,
+             _stopState==xrFWD?F("FWD"):F("REV"));
+        DCC::setThrottle(_locoid,newspeed,_stopState==xrFWD);
+        }
+}
+
+  // Selocoid as analog value to start drive
+  // use <z vpin locoid [notch]>
+  void EncoderThrottle::_writeAnalogue(VPIN vpin, int value, uint8_t param1, uint16_t param2)  {  
+    (void) param2;
+    _locoid=value;
+    if (param1>0) _notch=param1;
+    _rocoState=0;
+    
+    // If loco is moving, we inherit direction from it.
+    _stopState=xrSTOP;
+    if (_locoid>0) {
+        auto speedbyte=DCC::getThrottleSpeedByte(_locoid);
+        if ((speedbyte & 0x7f) >1) {
+            // loco is moving
+            _stopState= (speedbyte & 0x80)?xrFWD:xrREV;
+        } 
+    }
+    _display();
+  }
+
+  
+  void EncoderThrottle::_display() {
+    DIAG(F("DRIVE vpin %d loco %d notch %d"),_firstVpin,_locoid,_notch);
+  }
+

IO_EncoderThrottle.h

@@ -0,0 +1,53 @@
+/*
+ *  © 2024, Chris Harlow. All rights reserved.
+ *
+ *  This file is part of EX-CommandStation
+ *
+ *  This is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  It is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with CommandStation.  If not, see <https://www.gnu.org/licenses/>.
+*/
+
+/*
+* The IO_EncoderThrottle device driver uses a rotary encoder connected to vpins
+* to drive a loco.
+*  Loco id is selected by writeAnalog.
+*/
+
+#ifndef IO_EncoderThrottle_H
+#define IO_EncoderThrottle_H
+#include "IODevice.h"
+
+class EncoderThrottle : public IODevice {
+public:
+  
+  static void create(VPIN firstVpin, int dtPin, int clkPin, int clickPin, byte notch=10);
+ 
+private:
+  int _dtPin,_clkPin,_clickPin, _locoid, _notch,_prevpinstate; 
+  enum {xrSTOP,xrFWD,xrREV} _stopState;
+  byte _rocoState;  
+
+  // Constructor
+  EncoderThrottle(VPIN firstVpin, int dtPin, int clkPin, int clickPin, byte notch);
+  
+  void _loop(unsigned long currentMicros) override ;
+
+  // Selocoid as analog value to start drive
+  // use <z vpin locoid [notch]>
+  void _writeAnalogue(VPIN vpin, int value, uint8_t param1, uint16_t param2) override;
+  
+  void _display() override ;
+
+ };
+
+#endif

MotorDriver.cpp

@@ -1,5 +1,6 @@
 /*
  *  © 2022-2024 Paul M Antoine
+ *  © 2024 Herb Morton
  *  © 2021 Mike S
  *  © 2021 Fred Decker
  *  © 2020-2023 Harald Barth
@@ -98,7 +99,7 @@ MotorDriver::MotorDriver(int16_t power_pin, byte signal_pin, byte signal_pin2, i
   if (HAVE_PORTH(fastSignalPin.inout == &PORTH)) {
     DIAG(F("Found PORTH pin %d"),signalPin);
     fastSignalPin.shadowinout = fastSignalPin.inout;
-    fastSignalPin.inout = &shadowPORTF;
+    fastSignalPin.inout = &shadowPORTH;
   }
 
   signalPin2=signal_pin2;

SerialManager.cpp

@@ -68,7 +68,11 @@ void SerialManager::init() {
   new SerialManager(&Serial3);
 #endif
 #ifdef SERIAL2_COMMANDS
+#ifdef ARDUINO_ARCH_ESP32
+  Serial2.begin(115200, SERIAL_8N1, 16, 17); // GPIO 16 RXD2; GPIO 17 TXD2 on ESP32
+#else  // not ESP32
   Serial2.begin(115200);
+#endif // ESP32
   new SerialManager(&Serial2);
 #endif
 #ifdef SERIAL1_COMMANDS
@@ -88,7 +92,11 @@ void SerialManager::init() {
   }
 #endif
 #ifdef SABERTOOTH
+#ifdef ARDUINO_ARCH_ESP32
   Serial2.begin(9600, SERIAL_8N1, 16, 17); // GPIO 16 RXD2; GPIO 17 TXD2 on ESP32
+#else
+  Serial2.begin(9600);
+#endif
 #endif
 }
 

StringFormatter.cpp

@@ -139,6 +139,7 @@ void StringFormatter::send2(Print * stream,const FSH* format, va_list args) {
       case 'd': printPadded(stream,va_arg(args, int), formatWidth, formatLeft); break;
       case 'u': printPadded(stream,va_arg(args, unsigned int), formatWidth, formatLeft); break;
       case 'l': printPadded(stream,va_arg(args, long), formatWidth, formatLeft); break;
+      case 'L': stream->print(va_arg(args, unsigned long), DEC); break;
       case 'b': stream->print(va_arg(args, int), BIN); break;
       case 'o': stream->print(va_arg(args, int), OCT); break;
       case 'x': stream->print((unsigned int)va_arg(args, unsigned int), HEX); break;

TrackManager.cpp

@@ -1,6 +1,8 @@
 /*
  *  © 2022 Chris Harlow
  *  © 2022-2024 Harald Barth
+ *  © 2023-2024 Paul M. Antoine
+ *  © 2024 Herb Morton
  *  © 2023 Colin Murdoch
  *  All rights reserved.
  *  
@@ -149,6 +151,8 @@ void TrackManager::setDCCSignal( bool on) {
   HAVE_PORTD(shadowPORTD=PORTD);
   HAVE_PORTE(shadowPORTE=PORTE);
   HAVE_PORTF(shadowPORTF=PORTF);
+  HAVE_PORTG(shadowPORTF=PORTG);
+  HAVE_PORTH(shadowPORTF=PORTH);
   APPLY_BY_MODE(TRACK_MODE_MAIN,setSignal(on));
   HAVE_PORTA(PORTA=shadowPORTA);
   HAVE_PORTB(PORTB=shadowPORTB);
@@ -156,6 +160,8 @@ void TrackManager::setDCCSignal( bool on) {
   HAVE_PORTD(PORTD=shadowPORTD);
   HAVE_PORTE(PORTE=shadowPORTE);
   HAVE_PORTF(PORTF=shadowPORTF);
+  HAVE_PORTG(shadowPORTF=PORTG);
+  HAVE_PORTH(shadowPORTF=PORTH);
 }
 
 // setPROGSignal(), called from interrupt context
@@ -167,6 +173,8 @@ void TrackManager::setPROGSignal( bool on) {
   HAVE_PORTD(shadowPORTD=PORTD);
   HAVE_PORTE(shadowPORTE=PORTE);
   HAVE_PORTF(shadowPORTF=PORTF);
+  HAVE_PORTG(shadowPORTF=PORTG);
+  HAVE_PORTH(shadowPORTF=PORTH);
   APPLY_BY_MODE(TRACK_MODE_PROG,setSignal(on));
   HAVE_PORTA(PORTA=shadowPORTA);
   HAVE_PORTB(PORTB=shadowPORTB);
@@ -174,6 +182,8 @@ void TrackManager::setPROGSignal( bool on) {
   HAVE_PORTD(PORTD=shadowPORTD);
   HAVE_PORTE(PORTE=shadowPORTE);
   HAVE_PORTF(PORTF=shadowPORTF);
+  HAVE_PORTG(shadowPORTF=PORTG);
+  HAVE_PORTH(shadowPORTF=PORTH);
 }
 
 // setDCSignal(), called from normal context
@@ -631,23 +641,25 @@ void TrackManager::setJoinRelayPin(byte joinRelayPin) {
 
 void TrackManager::setJoin(bool joined) {
 #ifdef ARDUINO_ARCH_ESP32
-  if (joined) {
+  if (joined) {                                          // if we go into joined mode (PROG acts as MAIN)
     FOR_EACH_TRACK(t) {
-      if (track[t]->getMode() & TRACK_MODE_PROG) {
-	tempProgTrack = t;
+      if (track[t]->getMode() & TRACK_MODE_PROG) {       // find PROG track
+	tempProgTrack = t;                               // remember PROG track
 	setTrackMode(t, TRACK_MODE_MAIN);
-	break;
+	track[t]->setPower(POWERMODE::ON);               // if joined, always on
+	break;                                           // there is only one prog track, done
       }
     }
   } else {
     if (tempProgTrack != MAX_TRACKS+1) {
-      // as setTrackMode with TRACK_MODE_PROG defaults to
-      // power off, we will take the current power state
-      // of our track and then preserve that state.
-      POWERMODE tPTmode = track[tempProgTrack]->getPower(); //get current power status of this track
-      setTrackMode(tempProgTrack, TRACK_MODE_PROG);
-      track[tempProgTrack]->setPower(tPTmode);              //set track status as it was before
+      // setTrackMode defaults to power off, so we
+      // need to preserve that state.
+      POWERMODE tPTmode = track[tempProgTrack]->getPower(); // get current power status of this track
+      setTrackMode(tempProgTrack, TRACK_MODE_PROG);         // set track mode back to prog
+      track[tempProgTrack]->setPower(tPTmode);              // set power status as it was before
       tempProgTrack = MAX_TRACKS+1;
+    } else {
+      DIAG(F("Unjoin but no remembered prog track"));
     }
   }
 #endif

WiThrottle.cpp

@@ -322,6 +322,15 @@ void WiThrottle::locoAction(RingStream * stream, byte* aval, char throttleChar,
       }
       break;  
     }
+  case 'f': // Function key set, force function variant
+    {
+      bool pressed=aval[1]=='1';
+      int fKey = getInt(aval+2);
+      LOOPLOCOS(throttleChar, cab) {
+	DCC::setFn(myLocos[loco].cab,fKey, pressed);
+      }
+      break;
+    }
   case 'q':
     if (aval[1]=='V' || aval[1]=='R' ) {   //qV or qR
       // just flag the loco for broadcast and it will happen.

WifiESP32.cpp

@@ -265,7 +265,7 @@ bool WifiESP::setup(const char *SSid,
   if(!MDNS.begin(hostname)) {
     DIAG(F("Wifi setup failed to start mDNS"));
   }
-  if(!MDNS.addService("withrottle", "tcp", 2560)) {
+  if(!MDNS.addService("withrottle", "tcp", port)) {
     DIAG(F("Wifi setup failed to add withrottle service to mDNS"));
   }
 

version.h

@@ -3,7 +3,25 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.64"
+#define VERSION "5.2.77"
+// 5.2.77 - Withrottle: Implement "force function" subcommand "f"
+// 5.2.76 - Bugfix: EXRAIL: Catch CV read errors in the callback
+// 5.2.75 - Bugfix: Serial lines 4 to 6 OK
+// 5.2.74 - Bugfix: ESP32 turn on the joined prog (as main) again after a prog operation
+// 5.2.73 - Bugfix: STM32 further fixes to shadowPORT entries in TrackManager.cpp for PORTG and PORTH
+// 5.2.72 - Bugfix: added shadowPORT entries in TrackManager.cpp for PORTG and PORTH on STM32, fixed typo in MotorDriver.cpp
+// 5.2.71 -  Broadcasts of loco forgets. 
+// 5.2.70 -  IO_RocoDriver renamed to IO_EncoderThrottle.
+//        -  and included in IODEvice.h (circular dependency removed) 
+// 5.2.69 -  IO_RocoDriver. Direct drive train with rotary encoder hw.
+// 5.2.68 -  Revert function map to signed (from 5.2.66) to avoid
+//           incompatibilities with ED etc for F31 frequency flag.
+// 5.2.67 -  EXRAIL AFTER optional debounce time variable (default 500mS)
+//        -  AFTER(42) == AFTER(42,500) sets time sensor must 
+//        -  be continuously off.
+// 5.2.66 - <F cab DCFREQ 0..3>
+//        - EXRAIL SETFREQ drop loco param (breaking since 5.2.28)
+// 5.2.65 - Speedup Exrail SETFREQ 
 // 5.2.64 - Bugfix: <0 PROG> updated to undo JOIN 
 // 5.2.63 - Implement WIFI_LED for ESP32, ESPduino32 and EX-CSB1, that is turned on when STA mode connects or AP mode is up
 //        - Add BOOSTER_INPUT definitions for ESPduino32 and EX-CSB1 to config.example.h
@@ -11,7 +29,7 @@
 // 5.2.62 - Allow acks way longer than standard
 // 5.2.61 - Merg CBUS  ACON/ACOF/ONACON/ONACOF Adapter interface.
 //        - LCC Adapter interface throttled startup,
-//          (Breaking change woith Adapter base code)
+//          (Breaking change with Adapter base code)
 // 5.2.60 - Bugfix: Opcode AFTEROVERLOAD does not have an argument that is a pin and needs to be initialized
 //        - Remove inrush throttle after half good time so that we go to mode overload if problem persists
 // 5.2.59 - STM32 bugfix correct Serial1 definition for Nucleo-F401RE
@@ -281,9 +299,18 @@
 //       TrackManager DCC & DC up to 8 Districts Architecture 
 //       Automatic ALIAS(name) 
 //       Command Parser now accepts Underscore in Alias Names
+// 4.1.6 Support for new EX-MotorShield8874 Dual 5Amp Shield
+// 4.1.5 Bugfix LCN number parsing 
+// 4.1.4 Bugfix for issue #299 Turnout Description NULL
+// 4.1.3 Bugfix: Ethernet init order
+// 4.1.2 Bugfix: Ethernet shield W5100 does not report HW or link level
 // 4.1.1 Bugfix: preserve turnout format
-//       Bugfix: parse multiple commands in one buffer string correct
-//       Bugfix: </> command signal status in Exrail
+//       Bugfix: parse multiple commands in one buffer string correctly (ex: <s><Q>)
+//       Bugfix: </> command signal status of EX-RAIL tasks or threads
+//       Bugfix: EX-RAIL read long loco address
+//       Bugfix: Add space character after version string 4.1.1 for JMRI parsing.
+//       Improved display and loop time for signals make service start to be outside the DONT_TOUCH_WIFI_CONF area
+//       Improve WiFi startup by making service start to be outside the DONT_TOUCH_WIFI_CONF area
 // 4.1.0 ...
 //
 // 4.0.2 EXRAIL additions: