Merge 183b824a5d into ebaf1b984e

Added v4.1.6 Support EX-MotorShield8874

CommandDistributor.cpp

@@ -254,29 +254,64 @@ void  CommandDistributor::broadcastPower() {
     if (TrackManager::getPower(t, pstr))
       broadcastReply(COMMAND_TYPE, F("<p%s>\n"),pstr);
 
+  byte trackcount=0;
+  byte oncount=0;
+  byte offcount=0;
+  for(byte t=0; t<TrackManager::MAX_TRACKS; t++) {
+    if (TrackManager::isActive(t)) {
+      trackcount++;
+      // do not call getPower(t) unless isActive(t)!
+      if (TrackManager::getPower(t) == POWERMODE::ON)
+	oncount++;
+      else
+	offcount++;
+    }
+  }
+  //DIAG(F("t=%d on=%d off=%d"), trackcount, oncount, offcount);
+
+  char state='2';
+  if (oncount==0 || offcount == trackcount)
+    state = '0';
+  else if (oncount == trackcount) {
+    state = '1';
+  }
+
+  // additional info about MAIN, PROG and JOIN
   bool main=TrackManager::getMainPower()==POWERMODE::ON;
   bool prog=TrackManager::getProgPower()==POWERMODE::ON;
   bool join=TrackManager::isJoined();
+  //DIAG(F("m=%d p=%d j=%d"), main, prog, join);
   const FSH * reason=F("");
-  char state='1';
-  if (main && prog && join) reason=F(" JOIN");
-  else if (main && prog);
-  else if (main) reason=F(" MAIN");
-  else if (prog) reason=F(" PROG");
-  else state='0';
-  broadcastReply(COMMAND_TYPE, F("<p%c%S>\n"),state,reason);
+  if (join) {
+    reason = F("JOIN");
+    broadcastReply(COMMAND_TYPE, F("<p1 %S>\n"),reason);
+  } else {
+    if (main) {
+      //reason = F("MAIN");
+      broadcastReply(COMMAND_TYPE, F("<p1 MAIN>\n"));
+    }
+    if (prog) {
+      //reason = F("PROG");
+      broadcastReply(COMMAND_TYPE, F("<p1 PROG>\n"));
+    }
+  }
+
+  if (state != '2')
+    broadcastReply(COMMAND_TYPE, F("<p%c>\n"),state);
 #ifdef CD_HANDLE_RING
-  broadcastReply(WITHROTTLE_TYPE, F("PPA%c\n"), main?'1':'0');
+  // send '1' if all main are on, otherwise global state (which in that case is '0' or '2')
+  broadcastReply(WITHROTTLE_TYPE, F("PPA%c\n"), main?'1': state);
 #endif
-  LCD(2,F("Power %S%S"),state=='1'?F("On"):F("Off"),reason);  
+
+  LCD(2,F("Power %S %S"),state=='1'?F("On"): ( state=='0'? F("Off") : F("SC") ),reason);
 }
 
 void CommandDistributor::broadcastRaw(clientType type, char * msg) {
   broadcastReply(type, F("%s"),msg);
 }
 
-void CommandDistributor::broadcastTrackState(const FSH* format,byte trackLetter, int16_t dcAddr) {
-  broadcastReply(COMMAND_TYPE, format, trackLetter, dcAddr);
+void CommandDistributor::broadcastTrackState(const FSH* format, byte trackLetter, const FSH *modename, int16_t dcAddr) {
+  broadcastReply(COMMAND_TYPE, format, trackLetter, modename, dcAddr);
 }
 
 void  CommandDistributor::broadcastRouteState(uint16_t routeId, byte state ) {
@@ -330,7 +365,7 @@ void CommandDistributor::setVirtualLCDSerial(Print * stream) {
   virtualLCDSerial=stream;
 }
 
-Print* CommandDistributor::virtualLCDSerial=nullptr;
+Print* CommandDistributor::virtualLCDSerial=&USB_SERIAL;
 byte CommandDistributor::virtualLCDClient=0xFF;
 byte CommandDistributor::rememberVLCDClient=0;
 

CommandDistributor.h

@@ -55,7 +55,7 @@ public :
   static int16_t retClockTime();
   static void broadcastPower();
   static void broadcastRaw(clientType type,char * msg);
-  static void broadcastTrackState(const FSH* format,byte trackLetter, int16_t dcAddr);
+  static void broadcastTrackState(const FSH* format,byte trackLetter, const FSH* modename, int16_t dcAddr);
   template<typename... Targs> static void broadcastReply(clientType type, Targs... msg);
   static void forget(byte clientId);
   static void broadcastRouteState(uint16_t routeId,byte state);

CommandStation-EX.ino

@@ -87,7 +87,7 @@ void setup()
 
   DISPLAY_START (
     // This block is still executed for DIAGS if display not in use
-    LCD(0,F("DCC-EX v%S"),F(VERSION));
+    LCD(0,F("DCC-EX v" VERSION));
     LCD(1,F("Lic GPLv3"));
   );
 

DCCEXParser.cpp

@@ -160,6 +160,7 @@ const int16_t HASH_KEYWORD_C='C';
 const int16_t HASH_KEYWORD_G='G';
 const int16_t HASH_KEYWORD_H='H';
 const int16_t HASH_KEYWORD_I='I';
+const int16_t HASH_KEYWORD_M='M';
 const int16_t HASH_KEYWORD_O='O';
 const int16_t HASH_KEYWORD_P='P';
 const int16_t HASH_KEYWORD_R='R';
@@ -668,7 +669,7 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
         break;
 #endif
     case '=': // TRACK MANAGER CONTROL <= [params]>
-        if (TrackManager::parseJ(stream, params, p))
+        if (TrackManager::parseEqualSign(stream, params, p))
             return;
         break;
 
@@ -729,6 +730,12 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
                     StringFormatter::send(stream, F("<jA>\n"));
                     return;
  
+                case HASH_KEYWORD_M: // <JM> intercepted by EXRAIL
+                    if (params>1) break; // invalid cant do
+                    // <JM> requests stash size so say none.
+                    StringFormatter::send(stream,F("<jM 0>\n")); 
+                    return;
+ 
             case HASH_KEYWORD_R: // <JR> returns rosters 
                 StringFormatter::send(stream, F("<jR"));
 #ifdef EXRAIL_ACTIVE
@@ -840,13 +847,14 @@ void DCCEXParser::parseOne(Print *stream, byte *com, RingStream * ringStream)
     case 'L': // LCC interface implemented in EXRAIL parser
         break; // Will <X> if not intercepted by EXRAIL 
 
+#ifndef DISABLE_VDPY
     case '@': // JMRI saying "give me virtual LCD msgs"
         CommandDistributor::setVirtualLCDSerial(stream);
         StringFormatter::send(stream,
             F("<@ 0 0 \"DCC-EX v" VERSION "\">\n"
                "<@ 0 1 \"Lic GPLv3\">\n"));
         return; 
-
+#endif
     default: //anything else will diagnose and drop out to <X>
       if (opcode >= ' ' && opcode <= '~') {
         DIAG(F("Opcode=%c params=%d"), opcode, params);
@@ -1057,6 +1065,7 @@ bool DCCEXParser::parseS(Print *stream, int16_t params, int16_t p[])
 }
 
 bool DCCEXParser::parseC(Print *stream, int16_t params, int16_t p[]) {
+    (void)stream; // arg not used, maybe later?
     if (params == 0)
         return false;
     switch (p[0])

Display_Implementation.h

@@ -54,7 +54,9 @@
     xxx;  \
     t->refresh();}
 #else
-  #define DISPLAY_START(xxx) {}
+  #define DISPLAY_START(xxx) { \
+  xxx; \
+  }
 
 #endif
 #endif // LCD_Implementation_h

EXRAIL2.cpp

@@ -86,6 +86,8 @@ LookList *  RMFT2::onRotateLookup=NULL;
 LookList *  RMFT2::onOverloadLookup=NULL;
 byte * RMFT2::routeStateArray=nullptr; 
 const FSH  * * RMFT2::routeCaptionArray=nullptr; 
+int16_t * RMFT2::stashArray=nullptr;
+int16_t RMFT2::maxStashId=0;
 
 // getOperand instance version, uses progCounter from instance.
 uint16_t RMFT2::getOperand(byte n) {
@@ -232,6 +234,12 @@ if (compileFeatures & FEATURE_SIGNAL) {
       IODevice::configureInput((VPIN)pin,true);
       break;
     }
+    case OPCODE_STASH:
+    case OPCODE_CLEAR_STASH:
+    case OPCODE_PICKUP_STASH: {
+      maxStashId=max(maxStashId,((int16_t)operand));
+      break;
+    }
 
     case OPCODE_ATGTE:
     case OPCODE_ATLT:
@@ -312,7 +320,13 @@ if (compileFeatures & FEATURE_SIGNAL) {
   }
   SKIPOP; // include ENDROUTES opcode
   
-  DIAG(F("EXRAIL %db, fl=%d"),progCounter,MAX_FLAGS);
+  if (compileFeatures & FEATURE_STASH) {
+    // create the stash array from the highest id found
+    if (maxStashId>0) stashArray=(int16_t*)calloc(maxStashId+1, sizeof(int16_t));
+     //TODO check EEPROM and fetch stashArray
+  }
+  
+  DIAG(F("EXRAIL %db, fl=%d, stash=%d"),progCounter,MAX_FLAGS, maxStashId);
 
   // Removed for 4.2.31  new RMFT2(0); // add the startup route
   diag=saved_diag;
@@ -936,6 +950,34 @@ void RMFT2::loop2() {
     manageRouteState(operand,4);
     break;   
 
+  case OPCODE_STASH:
+    if (compileFeatures & FEATURE_STASH) 
+      stashArray[operand] = invert? -loco : loco;
+    break; 
+
+  case OPCODE_CLEAR_STASH:
+    if (compileFeatures & FEATURE_STASH) 
+      stashArray[operand] = 0;
+    break; 
+       
+  case OPCODE_CLEAR_ALL_STASH:
+    if (compileFeatures & FEATURE_STASH) 
+      for (int i=0;i<=maxStashId;i++) stashArray[operand]=0;
+    break;
+
+  case OPCODE_PICKUP_STASH:
+    if (compileFeatures & FEATURE_STASH) {
+      int16_t x=stashArray[operand];
+      if (x>=0) {
+        loco=x;
+        invert=false;
+        break;
+      }
+      loco=-x;
+      invert=true;
+    }
+    break;
+  
   case OPCODE_ROUTE:
   case OPCODE_AUTOMATION:
   case OPCODE_SEQUENCE:

EXRAIL2.h

@@ -70,6 +70,7 @@ enum OPCODE : byte {OPCODE_THROW,OPCODE_CLOSE,
              OPCODE_ONOVERLOAD,
              OPCODE_ROUTE_ACTIVE,OPCODE_ROUTE_INACTIVE,OPCODE_ROUTE_HIDDEN,
              OPCODE_ROUTE_DISABLED,
+             OPCODE_STASH,OPCODE_CLEAR_STASH,OPCODE_CLEAR_ALL_STASH,OPCODE_PICKUP_STASH,
 
              // OPcodes below this point are skip-nesting IF operations
              // placed here so that they may be skipped as a group
@@ -102,6 +103,7 @@ enum thrunger: byte {
   static const byte FEATURE_LCC   = 0x40;
   static const byte FEATURE_ROSTER= 0x20;
   static const byte FEATURE_ROUTESTATE= 0x10;
+  static const byte FEATURE_STASH = 0x08;
   
  
   // Flag bits for status of hardware and TPL
@@ -203,7 +205,7 @@ private:
     uint16_t getOperand(byte n); 
     
    static bool diag;
-   static const  HIGHFLASH  byte RouteCode[];
+   static const  HIGHFLASH3  byte RouteCode[];
    static const  HIGHFLASH  int16_t SignalDefinitions[];
    static byte flags[MAX_FLAGS];
    static Print * LCCSerial;
@@ -229,6 +231,8 @@ private:
    static void manageRouteCaption(uint16_t id, const FSH* caption);
    static byte * routeStateArray;
    static const FSH ** routeCaptionArray;
+   static int16_t * stashArray;
+   static int16_t maxStashId;
     
   // Local variables - exist for each instance/task 
     RMFT2 *next;   // loop chain 

EXRAIL2MacroReset.h

@@ -39,6 +39,8 @@
 #undef AUTOSTART
 #undef BROADCAST
 #undef CALL 
+#undef CLEAR_STASH
+#undef CLEAR_ALL_STASH
 #undef CLOSE 
 #undef DCC_SIGNAL
 #undef DCC_TURNTABLE
@@ -108,6 +110,7 @@
 #undef ONCHANGE
 #undef PARSE
 #undef PAUSE
+#undef PICKUP_STASH
 #undef PIN_TURNOUT 
 #undef PRINT
 #ifndef DISABLE_PROG
@@ -152,6 +155,7 @@
 #undef SIGNALH 
 #undef SPEED 
 #undef START 
+#undef STASH
 #undef STOP 
 #undef THROW
 #undef TT_ADDPOSITION
@@ -185,6 +189,8 @@
 #define AUTOSTART
 #define BROADCAST(msg)
 #define CALL(route)
+#define CLEAR_STASH(id)
+#define CLEAR_ALL_STASH(id)
 #define CLOSE(id) 
 #define DCC_SIGNAL(id,add,subaddr)
 #define DCC_TURNTABLE(id,home,description)
@@ -256,6 +262,7 @@
 #define PIN_TURNOUT(id,pin,description...) 
 #define PRINT(msg) 
 #define PARSE(msg)
+#define PICKUP_STASH(id)
 #ifndef DISABLE_PROG
 #define POM(cv,value)
 #endif
@@ -298,6 +305,7 @@
 #define SIGNALH(redpin,amberpin,greenpin) 
 #define SPEED(speed) 
 #define START(route)
+#define STASH(id) 
 #define STOP 
 #define THROW(id)
 #define TT_ADDPOSITION(turntable_id,position,value,angle,description...)

EXRAIL2Parser.cpp

@@ -45,6 +45,8 @@ const int16_t HASH_KEYWORD_RED=26099;
 const int16_t HASH_KEYWORD_AMBER=18713;
 const int16_t HASH_KEYWORD_GREEN=-31493;
 const int16_t HASH_KEYWORD_A='A';   
+const int16_t HASH_KEYWORD_M='M';
+
 
 // This filter intercepts <> commands to do the following:
 // - Implement RMFT specific commands/diagnostics
@@ -150,6 +152,32 @@ void RMFT2::ComandFilter(Print * stream, byte & opcode, byte & paramCount, int16
               return;
             }
             break;
+        case HASH_KEYWORD_M:
+            // NOTE: we only need to handle valid calls here because 
+            // DCCEXParser has to have code to handle the <J<> cases where
+            // exrail isnt involved anyway. 
+            // This entire code block is compiled out if STASH macros not used 
+          if (!(compileFeatures & FEATURE_STASH)) return;
+          if (paramCount==1) { // <JM>
+              StringFormatter::send(stream,F("<jM %d>\n"),maxStashId);
+              opcode=0;
+              break;
+            } 
+          if (paramCount==2) {  // <JM id>
+              if (p[1]<=0 || p[1]>maxStashId) break;
+              StringFormatter::send(stream,F("<jM %d %d>\n"),
+                    p[1],stashArray[p[1]]);
+               opcode=0;     
+               break;    
+          } 
+          if (paramCount==3) {  // <JM id cab>
+              if (p[1]<=0 || p[1]>maxStashId) break;
+              stashArray[p[1]]=p[2];
+              opcode=0;
+              break;      
+          }
+          break; 
+
         default:
             break;
         }
@@ -195,6 +223,15 @@ bool RMFT2::parseSlash(Print * stream, byte & paramCount, int16_t p[]) {
           sigid & SIGNAL_ID_MASK); 
       } 
     }
+
+    if (compileFeatures & FEATURE_STASH) {
+      for (int i=1;i<=maxStashId;i++) {
+        if (stashArray[i])
+          StringFormatter::send(stream,F("\nSTASH[%d] Loco=%d"),
+              i, stashArray[i]); 
+      } 
+    }
+    
     StringFormatter::send(stream,F(" *>\n"));
     return true;
   }

EXRAILMacros.h

@@ -113,6 +113,15 @@ void exrailHalSetup() {
 #undef ROUTE_CAPTION
 #define ROUTE_CAPTION(id,caption) | FEATURE_ROUTESTATE
 
+#undef CLEAR_STASH
+#define CLEAR_STASH(id) | FEATURE_STASH
+#undef CLEAR_ALL_STASH
+#define CLEAR_ALL_STASH | FEATURE_STASH
+#undef PICKUP_STASH
+#define PICKUP_STASH(id) | FEATURE_STASH
+#undef STASH
+#define STASH(id) | FEATURE_STASH
+
 const byte RMFT2::compileFeatures = 0
    #include "myAutomation.h"
 ;
@@ -353,6 +362,8 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 #define AUTOSTART OPCODE_AUTOSTART,0,0,
 #define BROADCAST(msg) PRINT(msg)
 #define CALL(route) OPCODE_CALL,V(route),
+#define CLEAR_STASH(id) OPCODE_CLEAR_STASH,V(id),
+#define CLEAR_ALL_STASH OPCODE_CLEAR_ALL_STASH,V(0),
 #define CLOSE(id)  OPCODE_CLOSE,V(id),
 #ifndef IO_NO_HAL
 #define DCC_TURNTABLE(id,home,description...) OPCODE_DCCTURNTABLE,V(id),OPCODE_PAD,V(home),
@@ -435,6 +446,7 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 #define ONTHROW(turnout_id) OPCODE_ONTHROW,V(turnout_id),
 #define ONCHANGE(sensor_id) OPCODE_ONCHANGE,V(sensor_id),
 #define PAUSE OPCODE_PAUSE,0,0,
+#define PICKUP_STASH(id) OPCODE_PICKUP_STASH,V(id),
 #define PIN_TURNOUT(id,pin,description...) OPCODE_PINTURNOUT,V(id),OPCODE_PAD,V(pin),
 #ifndef DISABLE_PROG
 #define POM(cv,value) OPCODE_POM,V(cv),OPCODE_PAD,V(value),
@@ -482,6 +494,7 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 #define SIGNALH(redpin,amberpin,greenpin) 
 #define SPEED(speed) OPCODE_SPEED,V(speed),
 #define START(route) OPCODE_START,V(route), 
+#define STASH(id) OPCODE_STASH,V(id), 
 #define STOP OPCODE_SPEED,V(0), 
 #define THROW(id)  OPCODE_THROW,V(id),
 #ifndef IO_NO_HAL
@@ -503,7 +516,7 @@ int RMFT2::onLCCLookup[RMFT2::countLCCLookup];
 
 // Build RouteCode
 const int StringMacroTracker2=__COUNTER__;
-const  HIGHFLASH  byte RMFT2::RouteCode[] = {
+const  HIGHFLASH3  byte RMFT2::RouteCode[] = {
     #include "myAutomation.h"
     OPCODE_ENDTASK,0,0,OPCODE_ENDEXRAIL,0,0 };
 

FSH.h

@@ -56,6 +56,7 @@ typedef __FlashStringHelper FSH;
 #if defined(ARDUINO_AVR_MEGA) || defined(ARDUINO_AVR_MEGA2560)
 // AVR_MEGA memory deliberately placed at end of link may need _far functions
 #define HIGHFLASH __attribute__((section(".fini2")))
+#define HIGHFLASH3 __attribute__((section(".fini3")))
 #define GETFARPTR(data) pgm_get_far_address(data)
 #define GETHIGHFLASH(data,offset) pgm_read_byte_far(GETFARPTR(data)+offset)
 #define GETHIGHFLASHW(data,offset) pgm_read_word_far(GETFARPTR(data)+offset)
@@ -63,6 +64,7 @@ typedef __FlashStringHelper FSH;
 // AVR_UNO/NANO runtime does not support _far functions so just use _near equivalent
 // as there is no progmem above 32kb anyway.
 #define HIGHFLASH PROGMEM
+#define HIGHFLASH3 PROGMEM
 #define GETFARPTR(data) ((uint32_t)(data))
 #define GETHIGHFLASH(data,offset) pgm_read_byte_near(GETFARPTR(data)+(offset))
 #define GETHIGHFLASHW(data,offset) pgm_read_word_near(GETFARPTR(data)+(offset))
@@ -80,6 +82,7 @@ typedef __FlashStringHelper FSH;
 typedef char FSH; 
 #define FLASH
 #define HIGHFLASH
+#define HIGHFLASH3
 #define GETFARPTR(data) ((uint32_t)(data))
 #define GETFLASH(addr) (*(const byte *)(addr))
 #define GETHIGHFLASH(data,offset)  (*(const byte *)(GETFARPTR(data)+offset))

GITHUB_SHA.h

@@ -1 +1 @@
-#define GITHUB_SHA "devel-202311200731Z"
+#define GITHUB_SHA "devel-202311232114Z"

MotorDriver.h

@@ -156,8 +156,10 @@ class MotorDriver {
     // from outside interrupt
     void setBrake( bool on, bool interruptContext=false);
     __attribute__((always_inline)) inline void setSignal( bool high) {
+#ifndef ARDUINO_ARCH_ESP32
       if (invertPhase)
 	high = !high;
+#endif
       if (trackPWM) {
 	DCCTimer::setPWM(signalPin,high);
       }

StringFormatter.cpp

@@ -39,8 +39,11 @@ void StringFormatter::diag( const FSH* input...) {
 
 void StringFormatter::lcd(byte row, const FSH* input...) {
   va_list args;
+#ifndef DISABLE_VDPY
   Print * virtualLCD=CommandDistributor::getVirtualLCDSerial(0,row);
-  
+#else
+  Print * virtualLCD=NULL;
+#endif
   // Issue the LCD as a diag first
   // Unless the same serial is asking for the virtual @ respomnse
   if (virtualLCD!=&USB_SERIAL) {
@@ -50,13 +53,14 @@ void StringFormatter::lcd(byte row, const FSH* input...) {
     send(&USB_SERIAL,F(" *>\n"));
   }
   
+#ifndef DISABLE_VDPY
   // send to virtual LCD collector (if any) 
   if (virtualLCD) {
     va_start(args, input);
     send2(virtualLCD,input,args);
     CommandDistributor::commitVirtualLCDSerial();
   }
-
+#endif
   DisplayInterface::setRow(row);    
   va_start(args, input);
   send2(DisplayInterface::getDisplayHandler(),input,args);
@@ -66,12 +70,14 @@ void StringFormatter::lcd2(uint8_t display, byte row, const FSH* input...) {
   va_list args;
   
    // send to virtual LCD collector (if any) 
+#ifndef DISABLE_VDPY
   Print * virtualLCD=CommandDistributor::getVirtualLCDSerial(display,row);
   if (virtualLCD) {
     va_start(args, input);
     send2(virtualLCD,input,args);
     CommandDistributor::commitVirtualLCDSerial();
   }
+#endif
 
   DisplayInterface::setRow(display, row);    
   va_start(args, input);
@@ -250,4 +256,3 @@ void StringFormatter::printHex(Print * stream,uint16_t value) {
     result[4]='\0';
      stream->print(result);
 }
- 

TrackManager.cpp

@@ -54,7 +54,6 @@ const int16_t HASH_KEYWORD_INV = 11857;
 MotorDriver * TrackManager::track[MAX_TRACKS];
 int16_t TrackManager::trackDCAddr[MAX_TRACKS];
 
-POWERMODE TrackManager::mainPowerGuess=POWERMODE::OFF;
 byte TrackManager::lastTrack=0;
 bool TrackManager::progTrackSyncMain=false; 
 bool TrackManager::progTrackBoosted=false; 
@@ -210,6 +209,9 @@ void TrackManager::setDCSignal(int16_t cab, byte speedbyte) {
 bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr) {
     if (trackToSet>lastTrack || track[trackToSet]==NULL) return false;
 
+    // Remember track mode we came from for later
+    TRACK_MODE oldmode = track[trackToSet]->getMode();
+
     //DIAG(F("Track=%c Mode=%d"),trackToSet+'A', mode);
     // DC tracks require a motorDriver that can set brake!
     if (mode & TRACK_MODE_DC) {
@@ -270,7 +272,6 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
     }
     track[trackToSet]->setMode(mode);
     trackDCAddr[trackToSet]=dcAddr;
-    streamTrackState(NULL,trackToSet);
 
     // When a track is switched, we must clear any side effects of its previous 
     // state, otherwise trains run away or just dont move.
@@ -337,10 +338,11 @@ bool TrackManager::setTrackMode(byte trackToSet, TRACK_MODE mode, int16_t dcAddr
         applyDCSpeed(trackToSet);
     }
 
-    // Normal running tracks are set to the global power state 
-    track[trackToSet]->setPower(
-      (mode & (TRACK_MODE_MAIN | TRACK_MODE_DC | TRACK_MODE_EXT | TRACK_MODE_BOOST)) ?
-        mainPowerGuess : POWERMODE::OFF);
+    // Turn off power if we changed the mode of this track
+    if (mode != oldmode)
+      track[trackToSet]->setPower(POWERMODE::OFF);
+    streamTrackState(NULL,trackToSet);
+
     //DIAG(F("TrackMode=%d"),mode);
     return true; 
 }
@@ -350,7 +352,7 @@ void TrackManager::applyDCSpeed(byte t) {
   track[t]->setDCSignal(speedByte);
 }
 
-bool TrackManager::parseJ(Print *stream, int16_t params, int16_t p[])
+bool TrackManager::parseEqualSign(Print *stream, int16_t params, int16_t p[])
 {
     
     if (params==0) { // <=>  List track assignments
@@ -397,46 +399,60 @@ bool TrackManager::parseJ(Print *stream, int16_t params, int16_t p[])
     return false;
 }
 
-void TrackManager::streamTrackState(Print* stream, byte t) {
-  // null stream means send to commandDistributor for broadcast
-  if (track[t]==NULL) return;
-  auto format=F("<= %d XXX>\n");
-  TRACK_MODE tm = track[t]->getMode();
+const FSH* TrackManager::getModeName(TRACK_MODE tm) {
+  const FSH *modename=F("---");
+  
   if (tm & TRACK_MODE_MAIN) {
     if(tm & TRACK_MODE_AUTOINV)
-      format=F("<= %c MAIN A>\n");
+      modename=F("MAIN A");
     else if (tm & TRACK_MODE_INV)
-      format=F("<= %c MAIN I>\n");
+      modename=F("MAIN I>\n");
     else
-      format=F("<= %c MAIN>\n");
+      modename=F("MAIN");
   }
 #ifndef DISABLE_PROG
   else if (tm & TRACK_MODE_PROG)
-    format=F("<= %c PROG>\n");
+    modename=F("PROG");
 #endif
   else if (tm & TRACK_MODE_NONE)
-    format=F("<= %c NONE>\n");
+    modename=F("NONE");
   else if(tm & TRACK_MODE_EXT)
-    format=F("<= %c EXT>\n");
+    modename=F("EXT");
   else if(tm & TRACK_MODE_BOOST) {
         if(tm & TRACK_MODE_AUTOINV)
-      format=F("<= %c B A>\n");
+      modename=F("B A");
     else if (tm & TRACK_MODE_INV)
-      format=F("<= %c B I>\n");
+      modename=F("B I");
     else
-      format=F("<= %c B>\n");
+      modename=F("B");
   }
   else if (tm & TRACK_MODE_DC) {
     if (tm & TRACK_MODE_INV)
-      format=F("<= %c DCX %d>\n");
+      modename=F("DCX");
     else
-      format=F("<= %c DC %d>\n");
+      modename=F("DC");
+  }
+  return modename;
 }
 
-  if (stream)
-    StringFormatter::send(stream,format,'A'+t, trackDCAddr[t]);
+// null stream means send to commandDistributor for broadcast
+void TrackManager::streamTrackState(Print* stream, byte t) {
+  const FSH *format;
+  
+  if (track[t]==NULL) return;
+  TRACK_MODE tm = track[t]->getMode();
+  if (tm & TRACK_MODE_DC)
+    format=F("<= %c %S %d>\n");
   else
-    CommandDistributor::broadcastTrackState(format,'A'+t, trackDCAddr[t]);
+    format=F("<= %c %S>\n");
+
+  const FSH *modename=getModeName(tm);
+  if (stream) {  // null stream means send to commandDistributor for broadcast
+    StringFormatter::send(stream,format,'A'+t, modename, trackDCAddr[t]);
+  } else {
+    CommandDistributor::broadcastTrackState(format,'A'+t, modename, trackDCAddr[t]);
+    CommandDistributor::broadcastPower();
+  }
   
 }
 
@@ -497,12 +513,15 @@ void TrackManager::setTrackPower(TRACK_MODE trackmodeToMatch, POWERMODE powermod
 void TrackManager::setTrackPower(POWERMODE powermode, byte t) {
   MotorDriver *driver=track[t]; 
   TRACK_MODE trackmode = driver->getMode();
-  if (trackmode & TRACK_MODE_DC) {
+  if (trackmode & TRACK_MODE_NONE) {
+    driver->setBrake(true);     // Track is unused. Brake is good to have.
+    powermode = POWERMODE::OFF; // Track is unused. Force it to OFF
+  } else if (trackmode & TRACK_MODE_DC) { // includes inverted DC (called DCX)
     if (powermode == POWERMODE::ON) {
       driver->setBrake(true);   // DC starts with brake on
       applyDCSpeed(t);          // speed match DCC throttles
     }
-  } else {
+  } else /* MAIN PROG EXT BOOST */ {
     if (powermode == POWERMODE::ON) {
       // toggle brake before turning power on - resets overcurrent error
       // on the Pololu board if brake is wired to ^D2.
@@ -513,15 +532,6 @@ void TrackManager::setTrackPower(POWERMODE powermode, byte t) {
   driver->setPower(powermode);
 }
 
-void TrackManager::reportPowerChange(Print* stream, byte thistrack) {
-  // This function is for backward JMRI compatibility only
-  // It reports the first track only, as main, regardless of track settings.
-  //  <c MeterName value C/V unit min max res warn>
-  int maxCurrent=track[0]->raw2mA(track[0]->getRawCurrentTripValue());
-  StringFormatter::send(stream, F("<c CurrentMAIN %d C Milli 0 %d 1 %d>\n"), 
-            track[0]->raw2mA(track[0]->getCurrentRaw(false)), maxCurrent, maxCurrent);                  
-}
-
 // returns state of the one and only prog track
 POWERMODE TrackManager::getProgPower() {
   FOR_EACH_TRACK(t)
@@ -639,18 +649,3 @@ int16_t TrackManager::returnDCAddr(byte t) {
     return (trackDCAddr[t]);
 }
 
-const char* TrackManager::getModeName(byte Mode) {
-  
-  //DIAG(F("PowerMode %d"), Mode);
-
-switch (Mode)
-  {
-  case 1: return "NONE";
-  case 2: return "MAIN";
-  case 4: return "PROG";
-  case 8: return "DC";
-  case 16: return "DCX";
-  case 32: return "EXT";
-  default: return "----";
-  }
-}

TrackManager.h

@@ -73,25 +73,28 @@ class TrackManager {
 
     static const int16_t MAX_TRACKS=8;
     static bool setTrackMode(byte track, TRACK_MODE mode, int16_t DCaddr=0);
-    static bool parseJ(Print * stream,  int16_t params, int16_t p[]);
+    static bool parseEqualSign(Print * stream,  int16_t params, int16_t p[]);
     static void loop();
     static POWERMODE getMainPower();
     static POWERMODE getProgPower();
+    static inline POWERMODE getPower(byte t) { return track[t]->getPower(); }
     static bool getPower(byte t, char s[]);
     static void setJoin(bool join);
     static bool isJoined() { return progTrackSyncMain;}
+    static inline bool isActive (byte tr) {
+      if (tr > lastTrack) return false;
+      return track[tr]->getMode() & (TRACK_MODE_MAIN|TRACK_MODE_PROG|TRACK_MODE_DC|TRACK_MODE_BOOST|TRACK_MODE_EXT);}
     static void setJoinRelayPin(byte joinRelayPin);
     static void sampleCurrent();
     static void reportGauges(Print* stream);
     static void reportCurrent(Print* stream);
-    static void reportPowerChange(Print* stream, byte thistrack);
     static void reportObsoleteCurrent(Print* stream); 
     static void streamTrackState(Print* stream, byte t);
     static bool isPowerOn(byte t);
     static bool isProg(byte t);
     static byte returnMode(byte t);
     static int16_t returnDCAddr(byte t);
-    static const char* getModeName(byte Mode);
+    static const FSH* getModeName(TRACK_MODE Mode);
 
     static int16_t joinRelay;
     static bool progTrackSyncMain;  // true when prog track is a siding switched to main
@@ -108,7 +111,6 @@ class TrackManager {
     static void addTrack(byte t, MotorDriver* driver);
     static byte lastTrack;
     static byte nextCycleTrack;
-    static POWERMODE mainPowerGuess;
     static void applyDCSpeed(byte t);
 
     static int16_t trackDCAddr[MAX_TRACKS];  // dc address if TRACK_MODE_DC

config.example.h

@@ -199,6 +199,18 @@ The configuration file for DCC-EX Command Station
 //
 // #define DISABLE_PROG
 
+/////////////////////////////////////////////////////////////////////////////////////
+// DISABLE / ENABLE VDPY
+//
+// The Virtual display "VDPY" feature is by default enabled everywhere
+// but on Uno and Nano. If you think you can fit it (for example
+// having disabled some of the features above) you can enable it with
+// ENABLE_VDPY. You can even disable it on all other CPUs with
+// DISABLE_VDPY
+//
+// #define DISABLE_VDPY
+// #define ENABLE_VDPY
+
 /////////////////////////////////////////////////////////////////////////////////////
 // REDEFINE WHERE SHORT/LONG ADDR break is. According to NMRA the last short address
 // is 127 and the first long address is 128. There are manufacturers which have

defines.h

@@ -219,10 +219,9 @@
 // The HAL is disabled by default on Nano and Uno platforms, because of limited flash space.
 // 
 #if defined(ARDUINO_AVR_NANO) || defined(ARDUINO_AVR_UNO)
-  #if defined(DISABLE_DIAG) && defined(DISABLE_EEPROM) && defined(DISABLE_PROG)
-    #warning you have sacrificed DIAG for HAL
-  #else
-    #define IO_NO_HAL
+#define IO_NO_HAL // HAL too big whatever you disable otherwise
+#ifndef ENABLE_VDPY
+#define DISABLE_VDPY
 #endif
 #endif
 

version.h

@@ -3,7 +3,15 @@
 
 #include "StringFormatter.h"
 
-#define VERSION "5.2.5"
+#define VERSION "5.2.9"
+// 5.2.9  - Bugfix LCD startup with no LCD, uses <@
+// 5.2.9  - EXRAIL STASH feature 
+// 5.2.8  - Bugfix: Do not turn off all tracks on change
+//          give better power messages
+// 5.2.7  - Bugfix: EXRAIL ling segment
+//        - Bugfix: Back out wrongly added const
+//        - Bugfix ESP32: Do not inverse DCX direction signal twice
+// 5.2.6  - Trackmanager broadcast power state on track mode change
 // 5.2.5  - Trackmanager: Do not treat TRACK_MODE_ALL as TRACK_MODE_DC
 // 5.2.4  - LCD macro will not do diag if that duplicates @ to same target.
 //        - Added ROUTE_DISABLED macro in EXRAIL
@@ -187,9 +195,18 @@
 //       TrackManager DCC & DC up to 8 Districts Architecture 
 //       Automatic ALIAS(name) 
 //       Command Parser now accepts Underscore in Alias Names
+// 4.1.6 Support for new EX-MotorShield8874 Dual 5Amp Shield
+// 4.1.5 Bugfix LCN number parsing
+// 4.1.4 Bugfix for issue #299 TurnoutDescription NULL
+// 4.1.3 Bugfix: Ethernet init order
+// 4.1.2 Bugfix: Ethernet shield W5100 does not report HW or link level
 // 4.1.1 Bugfix: preserve turnout format
-//       Bugfix: parse multiple commands in one buffer string correct
-//       Bugfix: </> command signal status in Exrail
+//       Bugfix: parse multiple commands in one buffer string correctly (ex: <s><Q>)
+//       Bugfix: </> command signal status of EX-RAIL tasks or threads
+//       Bugfix: EX-RAIL read long loco addr
+//       Bugfix: Add space character after version string 4.1.1 for JMRI parsing.
+//       Improved display and loop time for signals make service start to be outside the DONT_TOUCH_WIFI_CONF area
+//       Improve WiFi startup by making service start to be outside the DONT_TOUCH_WIFI_CONF area
 // 4.1.0 ...
 //
 // 4.0.2 EXRAIL additions: