1
0
mirror of https://github.com/DCC-EX/CommandStation-EX.git synced 2024-11-22 23:56:13 +01:00
Commit Graph

62 Commits

Author SHA1 Message Date
Asbelos
5efe385f2e Sensorcam 2024-11-02 13:25:35 +00:00
pmantoine
df1f365c1e Add WIFI_LED option for ESP32, edits for config.example.h 2024-06-29 16:22:23 +08:00
Harald Barth
263c3d01e3 DISABLE_DIAG by default for Uno and Nano 2024-04-07 09:26:32 +02:00
peteGSX
b51a8fe126 Add STARTUP_DELAY 2024-01-09 10:41:29 +10:00
Harald Barth
697f228a05 Save progmem with DISABLE_VDPY on Uno 2023-11-23 22:14:24 +01:00
Colin Murdoch
6da3153dd5 Define scroll rows in config
Allow the definition of MAX_CHARACTER_ROWS in config.h
2023-11-15 19:29:24 +00:00
Harald Barth
9ce95c07aa Booster mode configured by defined booster pin. New mode name output 2023-11-11 08:03:59 +01:00
Harald Barth
b44bebc1c6 copyright, version and compile warnings fix 2023-07-08 08:58:00 +02:00
Nathan Kellenicki
ae2bbbf668 Added WIFI_FORCE_AP to force AP mode when specifying SSID/pass 2023-07-02 19:51:29 -07:00
Harald Barth
35fd912c60 MAX_CURRENT restriction (caps motor shield value) 2023-06-26 20:00:03 +02:00
Harald Barth
8a69403dda devel release version 4.2.54 2023-06-03 22:01:14 +02:00
Harald Barth
3b6789ef01 Merge branch 'devel-sabertooth' into devel 2023-05-20 14:59:07 +02:00
Harald Barth
c472f48d93 Experimental support for sabertooth motor controller on ESP32 2023-05-20 14:57:00 +02:00
pmantoine
94e9c2021b Fix config.example.h OLED_DRIVER #define 2023-05-15 11:31:44 +08:00
peteGSX
b6f8889e8c Disable most programming functions 2023-04-20 07:08:11 +10:00
Neil McKechnie
59c6c1e5af Update examples and comments. 2023-03-09 15:59:25 +00:00
Colin Murdoch
4adcdc1b0b Update config.example.h
Removed redundant define for FastClock no longer required.
2023-02-28 12:12:08 +00:00
Colin Murdoch
8fac20a451 Add #ifdef selections
Add #ifdef selections linked to #define in config.exampe.h
2023-01-16 18:16:25 +00:00
pmantoine
88c7e540fa STM32 additional serial port support 2022-10-24 11:12:56 +08:00
Harald Barth
81b5b25430 disable EEPROM on ESP32 2022-10-14 14:20:32 +02:00
Harald Barth
88f16140f8 document Bluetooth on ESP32 (SERIAL_BT_COMMANDS) 2022-09-18 23:18:40 +02:00
Harald Barth
0406ca69cf add comment Pololu TB9051FTG 2022-07-04 22:52:37 +02:00
Fred
c15ea6e083
Update config.example.h
Add description of display scroll modes
2022-03-07 08:05:02 -05:00
Chris Mayo
fa4f5f08ef
Comment Typos (#214)
* Example config comment typos

* Code comment typos
2022-03-06 10:05:35 -05:00
Chris Mayo
cf905ce2f3
Clarify config.h entry for an OLED with a SH1106 (#210)
See:
79763a3 ("SH1106 OLED Display Offset Fix (#169)", 2021-06-10)
97f3450 ("Simplify OLED driver initialisation.", 2021-11-24)
2022-02-17 12:21:24 -05:00
Harald Barth
03f7014c02 spell example right 2022-01-23 18:55:00 +01:00
Harald Barth
d45585ce3d update copyright notes 2022-01-07 02:28:35 +01:00
Asbelos
0a40ef5ceb Merge branch 'master' into Broadcast 2021-12-05 12:13:39 +00:00
Asbelos
0f36ccdc57 Broadcast changes (1) UNTESTED 2021-12-05 12:08:59 +00:00
Harald Barth
b5af39dfc9 Merge branch 'RCN213-fixes' into master 2021-12-02 08:31:33 +01:00
Harald Barth
5c18f4a19d Merge branch 'short-long-addr' into master 2021-11-30 20:07:52 +01:00
Harald Barth
9018ec9757 DISABLE_EEPROM explanation 2021-11-30 19:56:09 +01:00
Harald Barth
fd43a9b88b defines to reverse accessories and turnouts renamed 2021-11-25 23:10:03 +01:00
Harald Barth
3bddeeda3e better long/short addr handling under <R>; configurable long/short border 2021-11-25 00:10:11 +01:00
Neil McKechnie
7aed7de6cd Change default LCD address.
LCD Backpack Address in example config.h changed to 0x27 (to match the most commonly available PCF8574 device).
2021-10-03 12:24:14 +01:00
Neil McKechnie
fb6ab85c4a Add flag to invert DCC Accessory command <a> behaviour
<a addr subaddr 1> command puts a D=1 into the DCC packet for a DCC Accessory Decoder.  This was previously though to correspond to a 'throw' request and a D=0 to a 'close' request.  RCN-213 standard identifies that D=1 is 'close' and D=0 is 'throw', so this change allows CS to be configured to invert the states to conform to the RCN-213 definition.
2021-08-27 21:43:24 +01:00
Neil McKechnie
08cfe41cf3 Revert to original DCC++ Classic Turnout command polarity.
Revert to <T id 1> command being 'throw' and <T id 0> being 'close', for turnouts.
2021-08-24 22:18:51 +01:00
Neil McKechnie
f0cd96fed3 Changes associated with RCN-213 DCC Accessory Packet format 2021-08-23 12:43:14 +01:00
FrightRisk
5eff4c5ee5 Squash all commits on RMFT branch to create EX-RAIL branch 2021-08-03 17:12:25 -04:00
Harald Barth
3fa805c0e7 Merge branch 'master' into copyrightmessages 2021-05-16 08:12:09 +02:00
Fred
d12714d51e
Update config.example.h
Fix spelling of contain
2021-04-20 09:31:17 -04:00
Harald Barth
1baff001f4 copyright messages 2021-04-14 22:46:29 +02:00
Neil McKechnie
def6c24bac Remove redundant option for memory monitoring.
Memory monitoring now enabled always.
2021-03-09 23:39:25 +00:00
Fred
4861e592c7
Nano every2 (#129)
* Start adding back unowifi stuffz

* Uno Wifi compiling

* Fixes for compile arduino unowifi r2

* FlasString and Timers for Uno Wifi

ALL these changes should be portable back to master

* Remove extra timer that was already added

* Changed to EveryTimerB

* Add everytimerb.h

* Cleanup

* Linear address <a> cmd

* Allow lower case keywords

* Add the F define to be on safe side if it is not present in the library core code

* Clean simple Timer interface

Removes overkill files, puts all timer in a single small file. (DCCTimer)

* Timer port

* Timer working

And slow wave command removed

* Correcting non-portables merged from master

* Wave-state machine ( part 11)

* Microtuning waveform

Significant reduction in code paths and call overheads

* Current check cleanup

* Fix no-loco id

Has to handle -1 correctly

* fix wrong format letter

* redo flow through wifisetup again

* version++

* bugfixes wifi setup

* Retry harder for AP mode

* Remove unued if

* DIO2 replacement

Currently for writing signal pins during waveform.

* Drop analogReadFast (see DCCTimer)

AnalogRead speed set in DCCTimer for ease of porting.
Code tidy and diagnostics in MotorDriver

* UNTESTED fast power,brake,fault pins

* Distunguish between in/out of FASTPIN

* minor performance tweaks

* Config comments and example use

* Config/example loading

* IP/PORT on LCD

* Ethernet simulated mac

Plus fixed listening port

* Github SHA

* Committing a SHA

* Fix for nano compile

* Comments and a reliability fix.

* UnoRev2 protection

* PWM pin implementation

* fix wifi setup issue

* Reinstate IP_PORT

* Wifi channel and code cleaninga

* Reduce duplicated F() macros

Compiler isn't as clever as one might expect

* Committing a SHA

* Update config.example.h

Add comment to wifi channel section

* Committing a SHA

* Handle shields with common fault pins (Pololu)

* Committing a SHA

* remove warning

* Committing a SHA

* only do the sha generation on master

* yaml syntax

* Fast SSD1306 OLED driver

Incorporate code from SSD1306Ascii library to speed up OLED screen updates, reduce memory requirements and eliminate some library dependences.

* Fix auto-configure from cold boot.

Add call to Wire.begin().

* Update comment for OLED_DRIVER define.

* Update MotorDrivers.h

Add a motor board definition for using the IBT_2 board for a high current to the main track and keep the Arduino Motor Shield for operating the programming track.

* Committing a SHA

* Fix missing F  in motor drivers

* JOIN relay pin

* Swap Join Relay high/low

* Hide WIFI_CONNECT_TIMEOUT

This is not what the config suggests it is...  The timeout is in the ES and defaults to 15 seconds. Abandoning it early leads to confused setup.

* Enhance OLED/LCD speed

Write one character or position command per loop entry so as not to hold up the loop.  Add support for SH1106 OLED as 132x64 size option.

* Enhance OLED/LCD speed

* Delete comment about OLED on UNO.

* Trim unwanted code

* Handle display types correctly

* Update comments

* Speed up OLED writes

Add new flushDisplay() to end any in-progress I2C transaction.  Previously, an redundant command was sent that ended the in-progress transaction but also sent another complete, but unnecessary, transaction.

* Comments and copyright update

* Reduce RAM and flash requirement a few more bytes.

* Move statics into LCDDisplay class, and reduce RAM.

Some state variables were static in LCDDisplay.write().  Moved to class members.  Also, types of data items like row, column & character position changed to int8_t to save a few bytes of RAM.

* Type lcdCols and lcdRows to unsigned.

Since lcdCols is normally 128, it needs to be uint8_t, not int8_t.

* remove timeout from user config

* faultpin is common only if it exists ; make code prettier

* Rationalisation of SSD1306 driver

Merge SSD1306AsciiWire.cpp into SSD1306Ascii.cpp and rename SSD1306AsciiWire.h as SSD1306Ascii.h.
Merge allFonts.h into System5x7.h and rename as SSD1306font.h.
Move all SSD1306 files into root folder to facilitate compilation in Arduino IDE.

* Fix some font attributes as const.

* Remove unused initialisation sequences for tiny oled screens

* Add m_ to variables

* Bump up I2C speed

Speed was 100kHz (default).  Max for OLEDis 400kHz.

* Revert "Bump up I2C speed"

This reverts commit 1c1168f433.

* Bump up I2C speed

Speed was 100kHz (default). Max for OLEDis 400kHz.

* Drop duplicate DIAG

* ignore mySetup.h files

* Restore uno to default_envs

Restore uno (previously commented out) to default_envs.

* Update objdump.bat

Allows other editors as Notepad is very slow on large files

* Prog Track overload during cv read

* Faster LCD Driver

Extract LCD driver from library;
Trim unused functionality;
Reduce I2C communications to minimum;
Speed up I2C clock to 400kHz.

* Update config.example.h

Add IBT_2_WITH_ARDUINO to example config

* Update config.example.h

* Screen enhancements (#126)

* Add I2CManager to coordinate I2C shared parameters.

* Add use of I2CManager, and experimental scrolling strategies.

New scrolling capability by defining SCROLLMODE in Config.h to 0 (original), 1 (by page) or 2 (by line).  If not defined, defaults to 0.

* Scrolling updates

New scrolling capability by defining SCROLLMODE in Config.h to 0 (original), 1 (by page) or 2 (by line). If not defined, defaults to 0.
Reformat.

* Add I2CManager calls. Remove unnecessary delays.

* Add I2CManager calls, remove unnecessary I2C delays.

* SSD1306: Move methods from .h to .cpp and reformat.

* Fix compiler warning in LiquidCrystal_I2C

* Allow forcing of I2C clock speed.

New method forceClock allows the I2C speed to be overridden.  For example, if the I2C bus is long then the speed can be forced lower.  It can also be forced higher to gain performance if devices are capable.

* Make Config.h conditionally included.

Allow for non-existence of Config.h.

* Correct scrolling and allow longer messages

Correct the handling of scrolling in scrollmode 1 to avoid a blank page being displayed.  Also, allow MAX_MSG_SIZE to be optionally configured to override maximum message length on screens.

* compiler warning on uno

Co-authored-by: dexslab <dex35803@gmail.com>
Co-authored-by: Asbelos <asbelos@btinternet.com>
Co-authored-by: Harald Barth <haba@kth.se>
Co-authored-by: Neil McKechnie <neilmck999@gmail.com>
Co-authored-by: Neil McKechnie <75813993+Neil-McK@users.noreply.github.com>
2021-03-07 15:58:35 -05:00
Fred
7963b02839
Update config.example.h
Modify example config for Ethernet Shield use
2020-12-27 17:27:22 -05:00
Harald Barth
01a6d1c8f4 Ethernet should need a #define in config(.example).h 2020-11-29 10:48:39 +01:00
Harald Barth
c57add11e3 Merge branch 'wifitimeout' into candidate 2020-11-26 16:17:17 +01:00
Harald Barth
31022094c1 adjust timeouts 2020-11-23 00:46:14 +01:00
Harald Barth
a3ddcb059a make connection timeout configurable 2020-11-21 23:23:27 +01:00
Harald Barth
df2e40fa11 empty SSID is "unconfigured" as well 2020-11-18 23:42:37 +01:00